When a service changes type from inetd to a regular daemon we must make
sure to first deregister the currently running inetd service properly.
Example: a system boots up with httpd.conf as an inetd service, so Finit
opens a socket 0.0.0.0:80 pending connections to start `httpd -i`.
After a while a user changes httpd.conf to be a regular service and
calls `initctl reload`. Without this patch the socket will remain
open and prevent httpd from opening and binding to the same port.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch fixes a problem with lingering inet sockets when inetd
services are removed. When removing an inetd service we must stop
the watcher and close the socket.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
We cannot clear the svc_t memory because other applications may have
connected to the same shared memory. An application may be inspecting
the current list of services (initctl) and pulling the rug from under
them could cause some really unpredicatble results.
This reverts commit 06d1e90bac.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Both the original MIT Athena inetd and the GNU inetutils inetd only keep
a backlog of 10 connections in listen() for TCP sockets. This patch
adjusts the Finit hard coded default accordingly.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
When starting an inetd service in verbose mode we print a progress
message to the console appended with "Connection". This patch simply
changes that to append with "connection" in lower case.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch fixes several issues related to the problem of launching
UDP inetd services:
- Make sure to disable O_NONBLOCK on the socket before passing it to
the inetd service, that's what is expected. This goes for both UDP
and TCP (accepted) connections -- there is no guarantee even for TCP
sockets that they do *not* inherit the parent socket's flags.
- Mark the UDP inetd parent's SVC as busy and stop its watcher before
starting the child task to service the connection. The watcher must
be stopped or multiple child tasks may be spawned!
- Only copy the most relevant parts to the UDP task. In particular
must *not* copy the libuEv watcher data to the task!
- With the child task done and the parent inetd service unblocked we
must restore O_NONBLOCK to the socket before restarting the watcher
When a UDP inetd service connection is handled we create a child task
to service the request, meanwhile we block the parent service. There
was a problem with blocking the parent since we called inetd_stop(),
which both did a shutdown() and close() of the socket ... this patch
introduces separate handling of blocked (busy) inetd services in the
inetd_stop() function and also make sure to handle restarting the
parent watcher in inetd_start() when the child task is done.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Both the new initctl API and the new pidfile watcher plugin failed to
set CLOEXEC on their sockets. This caused forked-off and exec()'d
children to inherit all these descriptors.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Patrick Stewart added the optional `log` keyword to service, run, task
and inetd stanzas in 889bce1. It redirects stdout/stderr to syslog
using the logger tool. This addition to the README is mainly just a
place holder so it's not forgotten before the upcoming README refactor.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The alsa-utils, dbus, lost (PID), resolvconf, and x11-common plugins are
rarely used in the main use-case for Finit (embedded head-less systems).
This patch disables them by default and makes them possible to enable by
configure --enable-$PLUGIN switches.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Slightly more readable code and fix issue with --enable-$PLUGIN not
biting properly in the generated Makefile.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch replaces the verbose and kernel-quiet runtime options with
a (hopefully) more useful quiet and silent modes of operation.
By default Finit progressively shows all services it starts at boot, but
when boot has completed and services are started/restarted Finit prints
nothing. If `--disable-quiet` is given all started/restared/stoppping
messages are shown even after boot.
However, if `--enable-silent` is given Finit is completely silent even
at boot, no progress is shown, until the first service is started, which
on most systems is login.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Remove confusing `--with-aix-soname` option to configure. Replace with
hard-coded `aix-soname=both` => shared + static archives are build as to
be expected.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch prevents too early start of services depending on other
services. E.g, if service B depends on A then we must wait for A to
signal that it is ready before we allow B to start -- in a Finit based
system A does this by creating, or touching (updating mtime), its PID
file. Services (like A) that support SIGHUP should call utime(), or
utimensat(), on the PID file at the end of their SIGHUP handler.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
From now on the user is required to have libuEv and libite installed
before building and installing finit. This is for maintenance reasons.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for the runtime `HOOK_SVC_LOST` and the (very
noisy) *example* plugin `lost.so`.
Customer request.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
To distinguish between variables and functions in comments Finit use ()
at the end of function names.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch builds Finit dynamically, including both plugins and GIT
submodules for libite and libuev. This causes libite.so and libuev.so
to be installed in a public path, which is not good if the user has
other versions of the same libraries already installed.
The correct fix is to remove the GIT submodules for now and require
users of Finit to build and install libite and libuev separately.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Same as for libite, libuev has also changed to autotools, so
call its autogen.sh and configure script in cascade from our
own. Aslo add safeguards to clean/distclean targets so we
do not attempt to enter the libuev subdirectory if it's not
configured.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The new libite uses autotools to build, and since we use it as a GIT
submodule we have to call its autogen.sh before we call the configure
script, from within the Finit configure script. We may have to move
to use autotools even for Finit ...
Also, make sure to only call clean/distclean on libite if the local
version is selected at configure time.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Stopped services are now (again) listed as "stopped" and halted
services, due to a runlevel change, are listed as "halted". Several
users complained that this change was just not intuitive. I agreee.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
By popular request, this patch adds support for querying status of a
single service. The syntax is similar to that of stop/start/reload.
Both `initctl show ...` and `initctl status ...` is supported.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
When no services were stopped we must ensure to start/SIGHUP any new or
SIGHUP:able services as the last pass of the `initctl reload` cycle.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch fixes a hang when performing a system reconfiguration using
`initctl reload`, `SIGHUP` or running `(f)init q`, which caused Finit
to wait for SIGHUP:able services to stop.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Joachim Nilsson