Simplify build system.
The logit tool is, as of v4.0, installed into /libexec/finit/logit and
thus not part of the system $PATH. If a sysadmin or distro wants to
remove it from the system it's entirely possible since Finit always
checks for logit availability before attempting to use it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Before 4e5d06b the only way to go into rescue mode was to skip certain
steps and then attempt to load /lib/finit/rescue.conf. After 4e5d06b
we keep the old handling as a fallback in case early sulogin fails.
The new tty option 'rescue' is added, which recue.conf is updated with.
This option implies notty mode and will try sulogin (again) before it
falls back to start /bin/sh as a login shell.
The reason we keep this is to be able to handle all possible use-cases
and also allow sysadmins to set up the behavior that fits their needs.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch does two things:
1. A system with a root account that has no password is now
allowed to login without password, as one expects.
2. A systems with a locked root account, is treated as (1).
The latter of the two may very well turn out to be a really bad idea.
Much angst have been poured into it, yet the end decision is to allow
access.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Most major init systems have a way to start a rescue shell. This is
usally started when the string `rescue` is read from the kernel's
command line.
The traditional Finit way of handling this has been to skip certain
phases of the standard boot, skip /etc/finit.conf et al, and go for a
/lib/finit/rescue.conf instead. This pratice has been imroved over
the last few commits with a sulogin. However, there was no way to
resume boot, like most other init systems offer.
This patch implements a very simple rescue mode, utilizing the new
sulogin, replacing the old (and experimental) emergency shell. If
Ctrl-D is pressed at the maintenance login prompt the boot is now
resumed. The same goes for exit/Ctrl-D from the maintenace shell.
The preferred sulogin is the bundled /libexec/finit/sulogin, but
if that isn't installed, the first one in $PATH is used. If no
sulogin at all is found, Finit proceeds as before this patch, to
skip certains steps and go for a /lib/finit/rescue.conf. Hence,
al steps can be controlled by an administrator.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- splice out sh() as a separate function
- make sh() session leader and set controlling TTY (TIOCSCTTY)
to make it a proper login shell with Ctrl-C functionality
- simplify call to execl()
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
These plugins should not run in rescue mode, because the system may be
in a very bad state and we do not want to make the situation any worse
than it already is.
Essentially, only services in rescue.conf should run in rescue mode.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Check if watchdogd *and* `WDT_DEVNODE` exists before registering the
built-in watchdogd at boot
- Update bootstrap.md with this additional constraint
- Update config.md with references to bootstrap and the new constraint
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch fixes an issue where services that support SIGHUP are not
properly stop/started on changes to their command line arguments.
A change to a service's env: file, e.g. /etc/default/foo for service
foo, must also be counted as a change to the foo args.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This changes the default to redirect output from run/task/services to
/dev/null. Use --disable-redirect to get the old pre v4.0 behavior.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We need at least the softdog watchdog driver loaded for proper watchdog
reset at reboot. This can safely be replaced with a hardware specific
module that provides /dev/watchdog ... without one Finit will try to
restart the built-in finit-watchdog service 10 times to no avail.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch changes the configure option to enable the built-in watchdog
from --enable-watchdog to --with-watchdog[=DEV]. This is the convention
for features that take arguments.
Also, improve log messages to aid debugging when finit-watchdogd does
not start properly. This means flushing logs to syslogd with closelog()
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch restores the start of the built-in/bundled watchdogd. It is
tracked in the `wdog` variable and handled as an exception at shutdown.
This is also a follow-up to 7b74c99, ensuring that we only kill/stop the
built-in watchdog, not any external. External ones can register to be
the controlling watchdogd in the system -- Finit is not the arbiter for
singletons, this is up to the system engineer.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
If we get a notification and the service dies immediately, and also
removes its pid file, we need to take corrective action.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch updates the service state machine with two new states: SETUP
and CLEANUP. If an executable pre:/path/to/script is defined for a
service, it is called every time the task goes to READY state. If an
executable post:/path/to/script is defined for a service, it is called
when the task goes to HALTED state.
Each of these two scripts default to a three (3) second execution time
before they are SIGKILLed. This can be adjusted with the `kill:SEC`
option for the service. There are no execution guarantees, nor are
there any way of detecting if the script was killed before completion or
not -- except for running Finit in debug mode and inspecting the result
printed by system_monitor().
Note: the post:script MUST be idempotent since transitions between READY
and HALTED can take place any number of times before a task goes
to its RUNNING state.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
These two BusyBox daemon's run in concert so it makes sense they also
share the same cgroup. In Finit that means sharing the same .conf file.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Before this patch bootclean() ran first in setup() which caused to to
remove the entire /var/run/finit directory, and other files as well,
created earlier. Only possible fix is to split clean and setup in
two and make sure to call clean as soon as we've mounted everything.
Note: this introduces a new behavior, and anyone hooking into the
same point to do good-stuff(tm) may be affected by this.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Avoid using reserved C++ keyword 'new'
- Rename new -> next
- Rename old -> prev
- Add debug for value being set to cond path
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Drop vhangup(), how did things ever work *with* this in?!
- setsid() + TIOCSCTTY are best buds, see notty code
- Allow storing any non-NULL string as tty->dev, expand in service_register()
- Reorder parse_cmdline_args(), we need to expand @console to current dev
- Fix tty arg parser, swapparoo for external getty
- Refactor tty_atcon(), iterated over by service_register()
- New arg format, need to translate for old run_getty2()
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch re-enables the fallback shell handling after the big TTY
refactor. We do this by allowing the fallback shell to run as a
regular service.
Note: this also adds the "hidden" support for 'notty' option for
tty configurations stanzas. This is just to pick up from
where the kernel left us, reusing stdin + stdout.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As soon as we collect a PID we should cancel any outstanding timer
actions. Because we may very soon svc_del() it ...
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Some C-lib, like GLIBC, convert NULL to <nil> when printing %p,
which we shouldn't rely on since others just bite the dust.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Initial refactor of the tty implementation to use the service/run/task
general backend. This enables all the features of services also for
ttys, except logging because it makes no sense.
Work in progress:
- plugins/tty.c does not work anymore, could possibly be removed in
favor of usinga (a new) condition instead (if-tty-exists)
- fallback tty does not work anymore, should we remove it, or can we
handle it as an optional built-in with (a new) condition?
- @console does not work anymore, needs to generate N cloned services
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Calling `tree /tmp` causes too long execution time and Travis timing out
the job. So let's install to a sane directory.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Show if exited/signaled
- Show status code and the std /NAME
- Show signal value and the std /NAME
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- List /etc/finit.conf
- Allow edit of /etc/finit.conf, using finit/finit.conf or NULL
- Add helpful question to edit /etc/finit.conf if no edit arg.
- Show available files if delete has no arg, like disable
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg