This patch fixes an issue with rescue mode on Alpine Linux where the
rescue shell was never properly started.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Turns out that on some systems, that has none of the first two, and
neither of the two environment variables set in ${VISUAL:-${EDITOR}},
they evaluate to 'sh /etc/finit.d/file.conf', which is true, so we
wouldn't even try mg or vi ...
This patch reverts to the spirit of Andreas Egebergs initial commit,
which turns out to be a better solution anyway :)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Both Debian and Builroot based systems use /etc/default and
Alpine Linux use /etc/conf.d, so let's just put both in by
default. If the directories exist we monitor them.
The --with-syconfig configure option is now disabled by default.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The module setting is deprecated, other mechanisms exist. This change
is to ensure we don't try to (re)load any modules at runtime, only at
bootstrap.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch collapses the two similar functions parse_conf() and
parse_conf_dynamic() into a single function. It also lifts old
restrictions on what config stanzas are allowed in /etc/finit.d
The only remaining restriction is the global rlimits, they remain
as the last setting only possible to define /etc/finit.conf which
then applies to all other services.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The enable/disable commands require either both the available/ and
enabled/ subdirectories in /etc/finit.d, or at least available/
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A system may, or may not, have the available/ and enabled/
subdirectories in /etc/finit.d. This is up to distros but
we support the following, example uses /etc/finit.d as the
FINIT_RCSD base directory:
1. No subdirectories
- enable: nop
- disable: nop
2. Only available/
- enable: checks if there's a service in available/
then symlinks to /etc/finit.d/
- disable: checks if service in /etc/finit.d is a
symlink, then removes it
3. Both available/ and enabled/
- enable: relative symlink in enabled/ is created if
service is available in available/
- disable: symlink in enabled/ is removed if exists
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Gamble a bit by redirecting stderr to /dev/null instead of command -v
- Drop vi from VISUAL/EDITOR expansion alternatives, tested later anyway
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Services that are instantiated by plugins, and thus don't have a .conf
file, tried to use uninitialized rlimits. This caused the kernel to
immediately kill those services for violating their own rlimits.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Check for env in /etc/conf.d on Alpine
- Update all services with their respective env: file
- Disable default modules, noew modprobe plugin should handle this
- Add watchdog service
- Rename syslogd -> syslog, in case we want to integrate sysklogd
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add support for monitoring environment files for services declared with
the `env:[-]/path/to/file` option. The default path to such files has
been chosen to follow Debian and Buildroot /etc/default/*
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Use iwatch, modeled after pidfile plugin
- Use one .conf watcher for all *.conf paths/files
- Use full path of conf file for changes, from realpath().
This fixes a long-standing limitation on unique filenames
for services, that absolutely nobody knew about
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We don't want to show progress (starting/stopping/restaring) at
runtime, since Finit v3. Many systems hooked up to a console
get confused by sudden output, or even ansi escape sequences.
This patch drops code added recently which caused a regression
in this policy. The resulting code is even more readable.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch handles a corner case when Finit may not have detected a
supervised process has died. When a user calls `initctl restart foo`
we now send such lost PIDs to the service_monitor() for restart.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Really kill them, our monitored process may be about to restart, so we
don't want any unintended side effects from lingering children in prior
instances.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch fixes a long standing issue where removing a service from
/etc/finit.conf does not stop and unregister it. The issue was caused
by the Finit support for "protected" services, e.g. services created
by plugins like hotplug.so
To reproduce issue before this fix:
cat /etc/finit.d/available/ntpd.conf >> /etc/finit.conf
initctl reload
The NTP service now runs smoothly, as expected. Later on, we decide to
drop it from our system:
sed -i 1,2d /etc/finit.conf
initctl reload
... and the NTP service continues to run unaffected. Not what most sane
users expect.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The cond_reload() fn is called on `initctl reload`, thus we don't need
to call service_step(), since we call service_step_all() later in that
cycle. So we can drop cond_update(NULL), which calls service_step().
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the redesign from <svc/path/to/pidfile> to <pid/name:id> in d1fac6f
we moved to matching svc_t only against their PID, which could pop up in
any *.pid or */pid in /var/run. This patch drops the (hopefully) last
remnants of the old <svc/> legacy.
To ensure we don't try reading the PID value from socket files, like
/var/run/initctl, we add simple fnmatch() of the inotified file. Two
calls to fnmatch(), for portability reasons, not every system has GNU
libc extensions like FNM_EXTMATCH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch makes it possible to create a service with optional
arguments, similar to the systemd EnvironmentFile= setting.
The major difference to systemd, is that Finit does not attempt
to start a service if it cannot find the env. file, unless it
is prefixed with '-'.
Example:
/etc/default/syslogd:
SYSLOGD_OPTS="-m0 -r 128k:10 -s"
/etc/finit.d/enabled/syslogd.conf
service env:-/etc/default/syslogd syslogd -F $SYSLOGD_OPTS
Only downside, right now, is that changing the contents of the file
/etc/default/syslogd does not mark the syslogd.conf as modified and
a subsequent `initctl reload` will *not* restart syslogd.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch drops the stand-alone reboot binary and folds it into the
initctl tool, which now becomes a multi-call binary.
With this change the reboot/shutdown/poweroff/halt/suspend commands also
no longer default to sending signals to PID 1, instead it now uses the
initctl <--> finit UNIX domain socket API. Signals are only used as a
fallback in case of non-working domain socket. The -f,--force mode of
operation still works, where `reboot(2)` is called directly.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On systems with udevd, or systemd-udevd, we must wait for udevd to start
before calling udevadm. This patch updates service and runtask stanzas
to the new condition system naming and adds 'log' to the udevadm cmds.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The refactor in 13893b9 caused a regression in composing service
arguments. This patch should rectify that.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Simplify log redirection, probe for logit early and fall back to
use a while-loop of syslog() instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg