With the introduction of GLIBC v2.34, all 32-bit devices running Linux
get the option of having a 64-bit time_t to survice the UNIX 2038
apocalypse.
Support for 64-bit time_t was added to libuev in v2.4.0. The build
flags for linking against libuev are defined in the library's .pc
files, which basically gives you -D_TIME_BITS=64 for your CPPFLAGS.
However, it turns out the $(uev_CFLAGS) from pkg-config were only used
when building the main finit binary -- not for the plugins, causing
some really wacky behavior as a result. All plugins and Finit itself
had some very different opinions on what `struct plugin` looked like,
including offsets and size. This led to all I/O plugins initializing
their sockets at the wrong offset -- little-endian 32-bit targets set
the HOOK_SHUTDOWN callback hook to address 0x1 -- which the reboot
code then tried to execute, of course leading to a segfault.
This is quite possibly the root cause of issue #216
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Previous patches only checked if cgroups v2 support was available in
the kernel. If mounting failed cgroups support was disabled.
However, much of the core logic to cgroups in Finit revolve around the
CPU controller. This patch adds checks to ensure that the kernel has
basic controller support as well.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch prevents bogus error messages from Finit for when
directories or symlinks already exist.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Traditionally we've reset the service restart counter on two occasions:
1) when a service reaches its max crash count (default 10), and
2) when a service somehow "stabilizes"
In the second case the service is restored to normal running state and
we "forget" its bad previous behavior. Meaning we cannot catch daemons
that act in an unstable manner outside the "rage quit" scenario.
This patch allows for slowing aging (decrementing) the restart counter
once every five minutes. Meaning we still catch rage quitters but now
are also able catch other types of misbehavior.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds a recent feature request to keep track of the total
number of restarts (including crashes and initctl restart) of both
service and sysv daemons.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Clearing of the svc->pidfile was introduced in e1b87d70 for a
restriction that has now been removed.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds support for detecting if the Linux kernel Fint runs on
has support for cgroups v2. The probe is done very early, in runlevel
S, when attempting to mount /sys/fs/cgroup. Meaning, the log message
may be lost on systems that do not run sysklogd[1].
Here's the relevant logs from a system running myLinux on a kernel
that has cgroups v2 support disabled:
Jan 10 20:19:40 anarchy finit[1]: myLinux 2021.11-696-g8fddaf36ed, entering runlevel S
Jan 10 20:19:40 anarchy finit[1]: Kernel does not support cgroups v2, disabling.
Jan 10 20:19:41 anarchy finit[1]: myLinux 2021.11-696-g8fddaf36ed, entering runlevel 2
All code paths that attempt to set or query kernel cgroups config has
been short circuited when this happens. However, this does not apply
to any cgroup related config in the Finit .conf files -- which may of
course be omitted. Yet, if configuration directives exist, they will
be parsed and may cause error.
Also, the initctl tool checks if /sys/fs/cgroup is mounted at runtime
and disables all status output and commands that rely on the feature.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
initctl cannot link with helpers.c, so let's relocate these helper
functions to util.c instead. Need them to probe for cgroup support.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A timeout is not the same as a restart delay, which this option really
controls, but the name restart_delay is a bit too long. Hence, this
obvious name so there's no ambiguity what unit we're dealing with.
Keeping restarttmo:SEC as a compatibility setting for the benefit of
the original authors, for now.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Minor coding style cleanup. Also, clang complained of a signed vs
unsigned comparison in service_retry(), max(timeout, svc->restart_tmo)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As suggested in issue #197, this new command: 'initctl id [NAME]'
lists identities of all, or named, services. E.g,
# initctl id telnetd
telnetd:23
telnetd:2323
The NAME argument is optional, when omitted it lists all enabled
run/task/sysv/service in the system, with their full name, and any
optional identitty. E.g.
# initctl id
dropbear
tty:console
mdnsd
mini-snmpd
smcrouted
sntpd
ssdpd
sysklogd
watchdogd
httpd
telnetd:23
telnetd:2323
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When the system has multiple services 'foo' the initctl command
'status foo' should give a focused overview of all matching foo:*,
whereas a 'status foo:2' should show the detailed view of that
particular instance.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since Finit v4.0 kernel console output has been silenced just prior to
the banner being printed, unless finit.debug mode was enabled. This
patch makes sure to check the kernel loglevel, if it's >= 7, finit no
longer disables kernel console ouput.
Consequently, you now need 'quiet' on your kernel command line, or a
loglevel < 7 for a quiet boot, at least until a syslogd takes over.
This means that you now can debug the kernel and finit independently,
which should be a great comfort to anyone doing bringup or any form of
kernel debugging.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch switches from "cp /var/lib/misc/random-seed /dev/urandom"
to use the kernel RNDADDENTROPY ioctl, which actually increments the
entropy count.
Also, the amount of random data saved at reboot is increased from the
fairly low 512 to 32768 bytes.
All in all, this should greatly improve the stability of most systems
during, or close to, bootstrap. In particular embedded systems with
limited or no HWRNG.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since we just want to clear the complete line, and are already a the
beginning of the line, we can use the simpler \e[K which also seems
to fix the display resize bug in #210.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Due to an unfortunate name clash with the DirectFB project LiTE, the
libite (-lite) project had to change its header namespace from
lite/*.h -> libite/*.h
This patch adds support for the new namepace in Finit, triggered by the
define _LIBITE_LITE, from the .pc file read by pkg-config. This should
only be needed on systems that install libite without the compatibility
symlink lite -> libite/ in the staging include directory.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg