.github: try running with older Ubuntu version

Signed-off-by: Joachim Wiberg <troglobit@gmail.com>

.github/workflows/release.yml

@@ -3,7 +3,7 @@ name: Release General
 on:
   push:
     tags:
-      - '[0-9]+.[0-9]+*'
+      - '[0-9]+.[0-9]+'
 
 jobs:
   release:

ChangeLog.md

@@ -10,40 +10,14 @@ All relevant changes are documented in this file.
 Critical bug fix release.  If you run a 32-bit target with GLIBC 2.34
 you *need* to upgrade!
 
-> **Note:** system verbosity on console at start and shutdown has been
->           increased.  Now the output of all commands is logged to the
->           system logger, for early services `/dev/kmsg` is used.
->
-> **Also:** please notice the updated support for enabling and disabling
->           kernel and Finit debug messages on the system console.  Very
->           useful when debugging either of them, e.g., a kernel module.
->           For details, see [cmdline.md](doc/cmdline.md).
-
 ### Changes
 * Loading `module`s no longer shows arguments in progress output
-* Warning messages in progress output now in yellow, not red, issue #214
+* Warning messages in progress output now in yellow, not red, issue 214
 * `initctl`, new command line option `-v,--version` for ease of use
 * Extended environment variables for pre/post scripts, issue #189
 * New condition `done` for run task, issue #207 by Ming Liu, Atlas Copco
 * Refactor parts of shutdown and reboot sequence for PREEMPT-RT kernels,
   by Robert Andersson, Mathias Thore, and Ming Liu, Atlas Copco
-* Conditions for run/task/sysv status, e.g. `run/foo/success` and
-  `task/bar/failure`.  Issue #232, by Ming Liu, Atlas Copco
-* initctl support for sending signals to services, by Jörgen
-  Sigvardsson, issue #225
-* `[WARN]` messages on console now printed in yellow, issue #214
-* Network services now also stopped when going to runlevel 6 (reboot),
-  not just runlevel 0 (shutdown) or 1 (single-user)
-* When `ifup` is missing on the system, bring at least `lo` up at boot
-* Log output from `ifup -a` (and `ifdown -a`), to syslog
-* Avoid blocking PID 1 when starting SysV init scripts
-* Allow custom `pid:` for SysV init scripts
-* Document supported types of forking/non-forking services
-* Auto-detect running in some common forms of containers
-* Simplify shutdown/reboot when running in a container
-* Log to `stderr` when running in a container w/o syslog daemon
-* Add support for `type:forking` to services, already supported but
-  with a very difficult `pid:` syntax.  Documentation updated
 
 ### Fixes
 * Fix nasty 32/64-bit alignment issue between finit and its plugins,
@@ -53,16 +27,6 @@ you *need* to upgrade!
   or does not have the required controllers (cpu)
 * Fix #217: iwatcher initialization issue, by Ming Liu, Atlas Copco
 * Fix #218: initctl matches too many services, by Ming Liu, Atlas Copco
-* Fix #219: not all filesystems unmounted at shutdown, by Ming Liu, 
-  Mathias Thore, and Robert Andersson, Atlas Copco
-* Fix #226: initctl shows wrong PID for crashing services
-* Fix #227: reboot stalls if process stopped with `[WARN]`
-* Fix #233: initctl shows wrong status for run/task, by Sergio Morlans
-  and Ming Liu, Atlas Copco
-* Fix start/stop of SysV init scripts
-* Fix call to `swapoff` at shutdown, does not support `-e` flag
-* Fix suspend to RAM issue.  Previously `reboot(RB_SW_SUSPEND)` was
-  used, now the modern `/sys/power/state` API is used instead.
 
 
 [4.2][] - 2022-01-16
@@ -817,7 +781,7 @@ The inetd release.
 ### Changes
 * Add support for built-in inetd super server -- launch services on
   demand.  Supports filtering per interface and custom Inet ports.
-* Upgrade to [libuEv][] v1.1.0 to better handle error conditions.
+* Upgrade to [libuEv] v1.1.0 to better handle error conditions.
 * Allow mixed case config directives in `finit.conf`
 * Add support for RFC 868 (rdate) time plugin, start as inetd service.
 * Load plugins before parsing `finit.conf`, this makes it possible to
@@ -848,7 +812,7 @@ The inetd release.
 [1.11][] - 2015-01-24 [YANKED]
 ------------------------------
 
-The [libuEv][] release.
+The [libuEv] release.
 
 **Note:** This release has been *yanked* from distribution due to a
   regression in launching background processes and TTY's.  Fixed in

README.md

@@ -54,11 +54,6 @@ on server and desktop systems as well.  For working examples, see the
   * [Alpine Linux](contrib/alpine/), and
   * [Debian GNU/Linux](contrib/debian/)
 
-> **Note:** support for various Linux distributions does not mean Finit
-> installs easily on all architectures.  The bundled install scripts are
-> examples for standard installations, tested on x86_64 systems.  Custom
-> setups, targeted at embedded systems, can be found in [myLinux][].
-
 
 Example
 -------
@@ -603,7 +598,6 @@ and proposed extensions.
 [Joachim Wiberg]:   https://troglobit.com
 [License]:          https://en.wikipedia.org/wiki/MIT_License
 [License Badge]:    https://img.shields.io/badge/License-MIT-teal.svg
-[GitHub]:           https://github.com/troglobit/myLinux/
 [GitHub]:           https://github.com/troglobit/finit/actions/workflows/build.yml/
 [GitHub Status]:    https://github.com/troglobit/finit/actions/workflows/build.yml/badge.svg
 [Coverity Scan]:    https://scan.coverity.com/projects/3545

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT(Finit, 4.3-rc1, https://github.com/troglobit/finit/issues, finit, https://troglobit.com/finit.html)
+AC_INIT(Finit, 4.3-dev, https://github.com/troglobit/finit/issues, finit, https://troglobit.com/finit.html)
 AC_CONFIG_AUX_DIR(aux)
 AM_INIT_AUTOMAKE([1.11 foreign dist-xz subdir-objects])
 AM_SILENT_RULES([yes])

doc/build.md

@@ -29,8 +29,8 @@ optional plugins to enable.  It depends on two external libraries:
 The configure script checks for all dependencies, including the correct
 version of the above mentioned libraries.  Currently required versions:
 
-- libite v2.2.0, or later
+- libite v2.2.0
-- libuEv v2.2.0, or later
+- libuEv v2.2.0
 
 
 Configure
@@ -54,7 +54,7 @@ Below are a few of the main switches to configure:
   will be linked statically.
 
 * `--enable-kernel-cmdline`: Enable Finit pre-4.1 parsing of init args from
-  `/proc/cmdline`, this is *not recommended* since Finit may be running as the
+  `/proc/cmdline`, this is not recommended since Finit may be running as the
   init for container apps that can see the host's `/proc` filesystem
 
 * `--enable-alsa-utils-plugin`: Enable the optional `alsa-utils.so` sound plugin.
@@ -67,13 +67,6 @@ Below are a few of the main switches to configure:
 
 For more configure flags, see <kbd>./configure --help</kbd>
 
-> **Note:** the configure script is not available in the GIT sources.  It is
->           however included in (officially supported) released tarballs.  The
->           idea is that you should not need GNU autotools to build, only the
->           above mentioned dependencies, a POSIX shell, a C compiler and make.
->           Any contributing to Finit can generate it from `configure.ac` using
->           the `autogen.sh` script.
-
 
 Example
 -------
@@ -81,8 +74,8 @@ Example
 First, unpack the archive:
 
 ```shell
-$ tar xf finit-4.3.tar.gz
+$ tar xf finit-4.1.tar.gz
-$ cd finit-4.3/
+$ cd finit-4.1/
 ```
 
 Then configure, build and install:
@@ -90,7 +83,7 @@ Then configure, build and install:
 ```shell
 $ ./configure --prefix=/usr                 --exec-prefix=         \
               --sysconfdir=/etc             --localstatedir=/var   \
-              --with-keventd                --with-watchdog
+			  --with-keventd                --with-watchdog
 $ make
 .
 .
@@ -98,7 +91,7 @@ $ make
 $ DESTDIR=/tmp/finit make install
 ```
 
-In this example the [finit-4.3.tar.gz][1] archive is unpacked to the
+In this example the [finit-4.1.tar.gz][1] archive is unpacked to the
 user's home directory, configured, built and installed to a temporary
 staging directory.  The environment variable `DESTDIR` controls the
 destination directory when installing, very useful for building binary
@@ -158,14 +151,12 @@ Debugging
 ---------
 
 Edit, or append to, the kernel command line: remove `quiet` to enable
-kernel messages and add `finit.debug` to enable Finit debug messages.
+kernel messages and add `debug` to enable Finit debug messages.
 
 ```shell
-append="init=/sbin/finit -- finit.debug"
+append="init=/sbin/finit debug"
 ```
 
-Notice the `--` separator.
-
 To debug startup issues, in particular issues with getty/login, add
 the following to your Finit .conf file:
 
@@ -184,6 +175,6 @@ it only for debugging start up issues when Finit crashes.
          systems since they can potentially give a user root access.
 
 
-[1]:       ftp://troglobit.com/finit/finit-4.3.tar.gz
+[1]:       ftp://troglobit.com/finit/finit-4.1.tar.gz
 [libuEv]:  https://github.com/troglobit/libuev
 [libite]:  https://github.com/troglobit/libite

doc/cmdline.md

@@ -10,13 +10,13 @@ The `bool` setting is one of `on, off, true false, 1, 0`.
 > parameters to init.  E.g., `init=/sbin/finit -- finit.debug rescue`
 
 * `debug`: Enable kernel debug.  Debug messages are printed to the
-   console until Finit starts up, unless `loglevel=7` (below) is used.
+    console until Finit starts up.
 
 * `finit.debug[=bool]`: Enable finit debug.  This is operated
-	independently of the kernel `debug` setting.  New as of Finit v4.
+	independently of the kernel debug setting.  New as of Finit v4.
 
-* `finit.status[=bool]`: Control finit boot progress, including banner.
+* `finit.show_status[=bool]`: Control finit boot progress, including
-  (Used to be `finit.show_status`, which works but is deprecated.)
+  banner.
 
 * `finit.status_style=<classic,modern>`: Set Finit boot progress style,
   when enabled.
@@ -26,18 +26,11 @@ The `bool` setting is one of `on, off, true false, 1, 0`.
 	signals and has no job control.  Recommend using, and modifying,
 	`rescue` mode instead.
 
-* `loglevel=<0-7>`, sets the kernel's log level, which is more granular
-  than `debug`.  Also, when `loglevel=7`, Finit will *not disable*
-  kernel logs to the console.  This is very useful when debugging the
-  kernel at system bring-up.  Since `loglevel=7` is the same as `debug`
-  this means you have to use `quiet` for a quiet boot, until sysklogd
-  takes over logging of kernel events.
-
 * `panic=SEC`: By default the kernel does not reboot after a kernel
     panic.  This setting will cause a kernel reboot after SEC seconds.
 
 * `quiet`: Suppress kernel logging to console, except for warnings and
-  errors.  Also, see `loglevel` and `quiet` above.
+  errors.
 
 * `rescue`: Start rescue/maintenance mode.  If your system comes with
     the bundled `sulogin` program (Finit, or from util-linux/Busybox),
@@ -53,5 +46,5 @@ The `bool` setting is one of `on, off, true false, 1, 0`.
 
 For more on kernel boot parameters, see the man page [bootparam(7)][].
 
-[config.md]:    config.md#rescue-mode
+[config.md][]:  config.md#rescue-mode
 [bootparam(7)]: https://www.man7.org/linux/man-pages/man7/bootparam.7.html

doc/config.md

@@ -323,10 +323,6 @@ calls `init-script restart` on `initctl reload`.  Similar to how
 
 Forking services started with `sysv` scripts can be monitored by Finit
 by declaring the PID file to look for: `pid:!/path/to/pidfile.pid`.
-Notice the leading `!`, it signifies Finit should not try to create the
-file, but rather watch that file for the resulting forked-off PID.  This
-syntax also works for forking daemons that do not have a command line
-option to run it in the foreground, more on this below in `service`.
 
 > `<COND>` is described in the [Services](#services) section.
 
@@ -348,19 +344,9 @@ prevent them from forking off a sub-process in the background.  This is
 the most reliable way to monitor a service.
 
 However, not all daemons support running in the foreground, or they may
-start logging to the foreground as well, these are forking daemons and
+start logging to the foreground as well, these are called forking
-are supported using the same syntax as forking `sysv` services, using
+services and are supported using the same syntax as forking `sysv`
-the `pid:!/path/to/pidfile.pid` syntax.  There is an alternative syntax
+services, using the `pid:!/path/to/pidfile.pid` syntax.
-that may be more intuitive, where Finit can also guess the PID file
-based on the daemon's command name:
-
-    service type:forking ntpd -- NTP daemon
-
-This example lets BusyBox `ntpd` daemonize itself.  Finit uses the
-basename of the binary to guess the PID file to watch for the PID:
-`/var/run/ntpd.pid`.  If Finit guesses wrong, you have to submit the
-full `pid:!/path/to/file.pid`.
-
   
 **Example:**
 

doc/plugins.md

@@ -35,27 +35,25 @@ For your convenience a set of *optional* plugins are available:
   _Optional plugin._
 
 * *hotplug.so*: Setup and start either udev or mdev hotplug daemon, if
-  available.  Enabled by default.
+  available.
 
 * *rtc.so*: Restore and save system clock from/to RTC on boot/halt.
-  Enabled by default.
 
 * *modules-load.so*: Scans /etc/modules-load.d for modules to modprobe.
 
 * *netlink.so*: Listens to Linux kernel Netlink events for gateway and
   interfaces.  These events are then sent to the Finit service monitor
   for services that may want to be SIGHUP'ed on new default route or
-  interfaces going up/down.  Enabled by default.
+  interfaces going up/down.
 
 * *resolvconf.so*: Setup necessary files for `resolvconf` at startup.
   _Optional plugin._
 
 * *tty.so*: Watches `/dev`, using inotify, for new device nodes (TTY's)
   to start/stop getty consoles on them on demand.  Useful when plugging
-  in a usb2serial converter to login to your embedded device.  Enabled
+  in a usb2serial converter to login to your embedded device.
-  by default.
 
-* *urandom.so*: Setup random seed at startup.  Enabled by default.
+* *urandom.so*: Setup random seed at startup.
 
 * *x11-common.so*: Setup necessary files for X-Window.  _Optional plugin._
 

doc/service.md

@@ -27,17 +27,7 @@ Finit can *not* start and monitor a daemon that:
 
 ### Forks to Background w/ PID File
 
-There are two syntax variants, type 1 and type 2.  The former is the
+    service pid:!/run/serv.pid serv       -- Forking service
-traditional one used also for `sysv` start/stop scripts, and the latter
-is inspired by systemd, with a twist -- it lets Finit guess the pifdile
-to look for based on the standard path and the basename of the command.
-
-    service pid:!/run/serv.pid serv       -- Forking service, type 1
-    service type:forking       serv       -- Forking service, type 2
-
-In this example the resulting files to watch for are `/run/serv.pid` and
-`/var/run/serv.pid`, respectively.  On most modern Linux systems this is
-the same directory (`/var/run` is a symlink to `../run`).
 
 ### Runs in Foreground w/ PID File
 

man/finit.8

@@ -11,9 +11,8 @@
 .Nd Fast init for Linux systems
 .Sh SYNOPSIS
 .Nm /sbin/finit
-.Op --
+.Op finit.status_style=classic
-.Op finit.status=[on,off]
+.Op finit.show_status=[on,off]
-.Op finit.status_style=[classic,modern]
 .Op finit.debug
 .Op rescue | recover
 .Op single | S

man/finit.conf.5

@@ -194,21 +194,7 @@ services and are supported using the same syntax as forking
 .Cm sysv
 services, using the
 .Cm pid:!/path/to/pidfile.pid
-command modifier syntax.  There is an alternative syntax that may be
+command modifier syntax.
-more intuitive, where Finit can also guess the PID file based on the
-daemon's command name:
-.Bd -unfilled -offset indent
-service type:forking ntpd -- NTP daemon
-.Ed
-.Pp
-Here we let BusyBox
-.Nm ntpd
-daemonize itself.  Finit uses the basename of the binary to guess the
-PID file to watch for the PID:
-.Pa /var/run/ntpd.pid .
-If Finit guesses wrong, you have to submit the full
-.Cm pid:!/path/to/file.pid
-option to your service stanza.
 .Pp
 .Sy Example: in the case of
 .Cm ospfd

plugins/bootmisc.c

@@ -135,7 +135,7 @@ static void setup(void *arg)
 		ln("/dev/shm", "/run/shm");
 
 		/* compat only, should really be set up by OS/dist */
-		ln("/run", "/var/run");
+		ln("../run", "/var/run");
 	} else {
 		makedir("/var/lock", 1777);
 		makedir("/var/run", 0755);

plugins/netlink.c

@@ -1,4 +1,3 @@
-
 /* Netlink plugin for IFUP/IFDN and GW events
  *
  * Copyright (C) 2009-2011  Mårten Wikström <marten.wikstrom@keystream.se>
@@ -253,7 +252,7 @@ static int nl_parse(int sd)
 			return -1;
 		}
 
-		_d("recv %zd bytes", len);
+		_d("recv %lld bytes", len);
 		l = (size_t)len;
 		for (nh = (struct nlmsghdr *)nl_buf; NLMSG_OK(nh, l); nh = NLMSG_NEXT(nh, l)) {
 			struct nlmsgerr *nle;
@@ -450,7 +449,6 @@ PLUGIN_INIT(plugin_init)
 PLUGIN_EXIT(plugin_exit)
 {
 	plugin_unregister(&plugin);
-	close(plugin.io.fd);
 }
 
 /**

plugins/pidfile.c

@@ -305,8 +305,8 @@ PLUGIN_INIT(plugin_init)
 
 PLUGIN_EXIT(plugin_exit)
 {
-	plugin_unregister(&plugin);
 	iwatch_exit(&iw_pidfile);
+	plugin_unregister(&plugin);
 }
 
 /**

plugins/sys.c

@@ -160,19 +160,23 @@ static void sys_init(void *arg)
 	char sysdir[MAX_ARG_LEN];
 	char *path;
 
+	_d("Calling mkpath() on sys conds");
 	if (mkpath(pid_runpath(_PATH_CONDSYS, sysdir, sizeof(sysdir)), 0755) && errno != EEXIST) {
 		_pe("Failed creating %s condition directory, %s", COND_SYS, _PATH_CONDSYS);
 		return;
 	}
 
+	_d("Calling realpth() on condsys");
 	path = realpath(_PATH_CONDSYS, NULL);
 	if (!path) {
 		_pe("Cannot figure out real path to %s, aborting", _PATH_CONDSYS);
 		return;
 	}
 
+	_d("Calling iwatch_add()");
 	if (iwatch_add(&iw_sys, path, IN_ONLYDIR))
 		iwatch_exit(&iw_sys);
+	_d("Done.");
 }
 
 static plugin_t plugin = {
@@ -197,8 +201,8 @@ PLUGIN_INIT(plugin_init)
 
 PLUGIN_EXIT(plugin_exit)
 {
-	plugin_unregister(&plugin);
 	iwatch_exit(&iw_sys);
+	plugin_unregister(&plugin);
 }
 
 /**

plugins/tty.c

@@ -116,9 +116,10 @@ PLUGIN_INIT(plugin_init)
 
 PLUGIN_EXIT(plugin_exit)
 {
-	plugin_unregister(&plugin);
 	if (plugin.io.fd)
 		close(plugin.io.fd);
+
+	plugin_unregister(&plugin);
 }
 
 /**

plugins/usr.c

@@ -123,8 +123,8 @@ PLUGIN_INIT(plugin_init)
 
 PLUGIN_EXIT(plugin_exit)
 {
-	plugin_unregister(&plugin);
 	iwatch_exit(&iw_usr);
+	plugin_unregister(&plugin);
 }
 
 /**

src/api.c

@@ -250,10 +250,10 @@ static int do_reboot(int cmd, char *buf, size_t len)
 	case INIT_CMD_SUSPEND:
 		_d("suspend");
 		sync();
-		rc = suspend();
+		rc = reboot(RB_SW_SUSPEND);
 		if (rc) {
 			if (errno == EINVAL)
-				snprintf(buf, len, "Kernel does not support suspend to RAM.");
+				snprintf(buf, len, "Kernel does not support suspend.");
 			else
 				snprintf(buf, len, "Failed: %s", strerror(errno));
 		}

src/cgroup.c

@@ -526,7 +526,7 @@ void cgroup_init(uev_ctx_t *ctx)
 
 	/* Move ourselves to init (best effort, otherwise run in 'root' group */
 	if (fnwrite("1", FINIT_CGPATH "/init/cgroup.procs")) {
-		_pe("Failed moving PID 1 to cgroup %s", FINIT_CGPATH "/init");
+		_pe("Failed moving PID 1 to cgroup ", FINIT_CGPATH "/init");
 		uev_io_stop(&cgw);
 		iwatch_exit(&iw_cgroup);
 		close(fd);

src/conf.c

@@ -86,8 +86,8 @@ fallback:
 }
 
 /*
- * finit.debug  = [on,off]
+ * finit.debug = [on,off]
- * finit.status = [on,off]     (compat finit.show_status)
+ * finit.show_status = [on,off]
  * finit.status_style = [old,classic,modern]
  */
 static void parse_finit_opts(char *opt)
@@ -116,7 +116,7 @@ static void parse_finit_opts(char *opt)
 		return;
 	}
 
-	if (string_compare(opt, "status") || string_compare(opt, "show_status")) {
+	if (string_compare(opt, "show_status")) {
 		show_progress(get_bool(arg, 1) ? PROGRESS_DEFAULT : PROGRESS_SILENT);
 		return;
 	}
@@ -205,6 +205,8 @@ void conf_parse_cmdline(int argc, char *argv[])
 
 	parse_kernel_cmdline();
 	parse_kernel_loglevel();
+
+	log_init();
 }
 
 static int kmod_exists(char *mod)

src/exec.c

@@ -97,14 +97,12 @@ static int do_redirect(void)
  */
 int run(char *cmd, char *log)
 {
-	char *args[NUM_ARGS + 1] = { 0 };
 	int status, result, i = 0;
+	char *args[NUM_ARGS + 1], *arg;
 	char *backup = NULL;
 	pid_t pid;
 
 	if (!log) {
-		char *arg;
-
 		/* We must create a copy that is possible to modify. */
 		backup = arg = strdup(cmd);
 		if (!arg)
@@ -166,7 +164,7 @@ int run(char *cmd, char *log)
 
 		_exit(rc);
 	} else if (-1 == pid) {
-		_pe("%s", !log ? args[0] : cmd);
+		_pe("%s", args[0]);
 		if (backup)
 			free(backup);
 

src/finit.c

@@ -334,7 +334,7 @@ static void fs_mount_all(void)
 	plugin_run_hooks(HOOK_MOUNT_POST);
 
 	if (whichp("swapon"))
-		run_interactive("swapon -ea", "Enabling system swap");
+		run("swapon -ea", "swapon");
 
 	_d("Finalize, ensure common file systems are available ...");
 	fs_finalize();
@@ -570,7 +570,7 @@ int main(int argc, char *argv[])
 	};
 	uev_ctx_t loop;
 
-	/* user calling telinit or init */
+	/* telinit or stand-alone process monitor */
 	if (getpid() != 1)
 		return telinit(argc, argv);
 
@@ -581,12 +581,12 @@ int main(int argc, char *argv[])
 
 	/*
 	 * Parse /proc/cmdline (debug, rescue, console=, etc.)
+	 * Also calls log_init() to set correct log level
 	 */
 	conf_parse_cmdline(argc, argv);
 
 	/*
-	 * Figure out system console(s) and call log_init() to set
+	 * Figure out system console(s)
-	 * correct log level, possibly finit.debug enabled.
 	 */
 	console_init();
 

src/helpers.c

@@ -81,7 +81,7 @@ char *console(void)
 
 void console_init(void)
 {
-	log_init();
+	ttinit();
 }
 
 ssize_t cprintf(const char *fmt, ...)
@@ -500,25 +500,20 @@ void networking(int updown)
 	if (fexist("/etc/network/interfaces")) {
 		pid_t pid;
 
+		if (!updown) {
+			run_interactive("ifdown -a", "Stopping networking");
+			goto done;
+		}
+
 		pid = fork();
 		if (pid == 0) {
 			int rc = EX_OSERR;
-			const char *cmd;
 			FILE *pp;
 
 			setsid();
 			sig_unblock();
 
-			if (updown)
+			pp = popen("ifup -a 2>&1", "r");
-				cmd = "ifup -a 2>&1";
-			else if (whichp("ifquery"))
-				/* Regular ifodwn supports --force but not -f */
-				cmd = "ifdown -a --force 2>&1";
-			else
-				/* Busybox ifdown support -f, but not --force */
-				cmd = "ifdown -a -f 2>&1";
-
-			pp = popen(cmd, "r");
 			if (pp) {
 				char buf[256];
 
@@ -531,8 +526,7 @@ void networking(int updown)
 			_exit(rc);
 		}
 		cgroup_service("network", pid, NULL);
-		print(pid > 0 ? 0 : 1, "%s network interfaces ...",
+		print(pid > 0 ? 0 : 1, "Bringing up network interfaces ...");
-		      updown ? "Bringing up" : "Taking down");
 
 		goto done;
 	}

src/helpers.h

@@ -65,7 +65,7 @@ struct fstab *getfsent  (void);
 
 char   *console         (void);
 void    console_init    (void);
-ssize_t cprintf         (const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
+ssize_t cprintf         (const char *fmt, ...);
 
 char   *strip_line      (char *line);
 
@@ -79,7 +79,7 @@ void    stty            (int fd, speed_t speed);
 
 void    print_banner    (const char *heading);
 void    printv          (const char *fmt, va_list ap);
-void    print           (int action, const char *fmt, ...) __attribute__ ((format (printf, 2, 3)));
+void    print           (int action, const char *fmt, ...);
 void    print_desc      (char *action, char *desc);
 int     print_result    (int fail);
 
@@ -97,7 +97,7 @@ int     in_container    (void);
 
 int     complete        (char *cmd, int pid);
 int     run             (char *cmd, char *log);
-int     run_interactive (char *cmd, char *fmt, ...) __attribute__ ((format (printf, 2, 3)));
+int     run_interactive (char *cmd, char *fmt, ...);
 int     exec_runtask    (char *cmd, char *args[]);
 pid_t   run_getty       (char *tty, char *cmd, char *args[], int noclear, int nowait, struct rlimit rlimit[]);
 pid_t   run_sh          (char *tty, int noclear, int nowait, struct rlimit rlimit[]);

src/initctl.h

@@ -34,7 +34,7 @@ extern int heading;			/* initctl -t */
 extern int verbose;			/* initctl -v */
 extern int plain;			/* initctl -p */
 
-extern void print_header(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
+extern void print_header(const char *fmt, ...);
 
 #endif /* FINIT_INITCTL_H_ */
 

src/iwatch.c

@@ -62,10 +62,8 @@ int iwatch_init(struct iwatch *iw)
 	 * reconf of systems with lots of services.
 	 */
 	len = sizeof(sz);
-	if (!getsockopt(iw->fd, SOL_SOCKET, SO_RCVBUF, &sz, &len)) {
+	if (!getsockopt(iw->fd, SOL_SOCKET, SO_RCVBUF, &sz, &len))
-		if (setsockopt(iw->fd, SOL_SOCKET, SO_RCVBUF, &sz, sizeof(sz)))
+		setsockopt(iw->fd, SOL_SOCKET, SO_RCVBUF, &sz, sizeof(sz));
-			_pe("Failed increasing size of inotify socket");
-	}
 
 	initialized = 1;
 

src/keventd.c

@@ -24,7 +24,6 @@
 #include <errno.h>
 #include <dirent.h>
 #include <poll.h>
-#include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <stdarg.h>
@@ -53,10 +52,6 @@
 static int num_ac_online;
 static int num_ac;
 
-static int running = 1;
-static int level;
-static int logon;
-
 int debug;			/* debug in other modules as well */
 
 void logit(int prio, const char *fmt, ...)
@@ -64,9 +59,9 @@ void logit(int prio, const char *fmt, ...)
 	va_list ap;
 
 	va_start(ap, fmt);
-	if (logon)
+	if (!debug)
 		vsyslog(prio, fmt, ap);
-	else if (prio <= level) {
+	else {
 		vfprintf(stderr, fmt, ap);
 		fprintf(stderr, "\n");
 	}
@@ -184,26 +179,6 @@ static void init(void)
 		sys_cond("pwr/ac", 1);
 }
 
-static void set_logging(int prio)
-{
-	setlogmask(LOG_UPTO(prio));
-	level = prio;
-}
-
-static void toggle_debug(int signo)
-{
-	(void)signo;
-
-	debug ^= 1;
-	set_logging(debug ? LOG_DEBUG : LOG_NOTICE);
-}
-
-static void shut_down(int signo)
-{
-	(void)signo;
-	running = 0;
-}
-
 /*
  * Started by Finit as soon as possible when base filesystem is up,
  * modules have been probed, or insmodded from /etc/finit.conf, so by
@@ -223,13 +198,10 @@ int main(int argc, char *argv[])
 	}
 
 	if (!debug) {
-		openlog("keventd", LOG_PID, LOG_DAEMON);
+		openlog("keventd", LOG_CONS | LOG_PID, LOG_DAEMON);
-		set_logging(LOG_NOTICE);
+		setlogmask(LOG_UPTO(LOG_NOTICE));
-		logon = 1;
 	}
 
-	signal(SIGUSR1, toggle_debug);
-	signal(SIGTERM, shut_down);
 	init();
 
 	pfd.events = POLLIN;
@@ -244,18 +216,11 @@ int main(int argc, char *argv[])
 		panic("bind failed");
 
 	logit(LOG_DEBUG, "Waiting for events ...");
-	while (running) {
+	while (-1 != poll(&pfd, 1, -1)) {
 		char *path = NULL;
 		int ac = 0;
 		int i, len;
 
-		if (-1 == poll(&pfd, 1, -1)) {
-			if (errno == EINTR)
-				continue;
-
-			break;
-		}
-
 		len = recv(pfd.fd, buf, sizeof(buf), MSG_DONTWAIT);
 		if (len == -1) {
 			switch (errno) {
@@ -270,7 +235,6 @@ int main(int argc, char *argv[])
 			}
 		}
 		buf[len] = 0;
-		logit(LOG_DEBUG, "%s", buf);
 
 		/* skip libusb events, focus on kernel events/changes */
 		if (strncmp(buf, "change@", 7))

src/log.c

@@ -40,8 +40,6 @@ static int loglevel = LOG_INFO;
 
 void log_init(void)
 {
-	ttinit();
-
 	if (debug)
 		loglevel = LOG_DEBUG;
 	else
@@ -74,25 +72,24 @@ static int log_open(void)
 	if (debug)
 		opts |= LOG_PERROR;
 
+	closelog();
 	openlog("finit", opts, LOG_DAEMON);
 	setlogmask(LOG_UPTO(loglevel));
 
 	return up = 1;
 }
 
-static void log_close(void)
-{
-	closelog();
-	up = 0;
-}
-
 /* Toggle debug mode */
 void log_debug(void)
 {
 	debug = !debug;
 
-	log_close();
+	if (debug) {
-	log_init();
+		loglevel = LOG_DEBUG;
+	} else {
+		loglevel = LOG_NOTICE;
+		ttinit();
+	}
 	log_open();
 
 	logit(LOG_NOTICE, "Debug mode %s", debug ? "enabled" : "disabled");

src/log.h

@@ -43,14 +43,14 @@
 #define  _d(fmt, args...) logit(LOG_DEBUG,   "%s():" fmt, __func__, ##args)
 #define  _w(fmt, args...) logit(LOG_WARNING, "%s():" fmt, __func__, ##args)
 #define  _e(fmt, args...) logit(LOG_ERR,     "%s():" fmt, __func__, ##args)
-#define _pe(fmt, args...) logit(LOG_ERR,     "%s():" fmt ": %s", __func__, ##args, strerror(errno))
+#define _pe(fmt, args...) logit(LOG_ERR,     "%s():" fmt ": %n", __func__, ##args, strerror(errno))
 
 void    log_init        (void);
 void    log_exit        (void);
 
 void    log_debug       (void);
 
-void    logit           (int prio, const char *fmt, ...)   __attribute__ ((format (printf, 2, 3)));
+void    logit           (int prio, const char *fmt, ...);
-void    flog            (char *file, const char *fmt, ...) __attribute__ ((format (printf, 2, 3)));
+void    flog            (char *file, const char *fmt, ...);
 
 #endif /* FINIT_LOG_H_ */

src/mount.c

@@ -21,13 +21,10 @@
  * THE SOFTWARE.
  */
 
-#include <errno.h>
 #include <string.h>
 #include <mntent.h>
 #include <sys/mount.h>
 
-#include "helpers.h"
-
 /*
  * SysV init on Debian/Ubuntu skips these protected mount points
  *
@@ -89,27 +86,13 @@ static struct mntent *iterator(char *fstab, FILE **fp)
 	return NULL;
 }
 
-static int unmount(const char *target)
-{
-	int rc;
-
-	rc = umount(target);
-	if (rc && errno != EBUSY) {
-		print(2, "Failed unmounting %s, error %d: %s", target, errno, strerror(errno));
-		return rc;
-	}
-	print(0, "Unmounting %s", target);
-
-	return 0;
-}
-
 void unmount_tmpfs(void)
 {
 	struct mntent *mnt;
 	FILE *fp = NULL;
 
 	while ((mnt = iterator("/proc/mounts", &fp))) {
-		if (!strcmp("tmpfs", mnt->mnt_fsname) && !unmount(mnt->mnt_dir))
+		if (!strcmp("tmpfs", mnt->mnt_fsname) && !umount(mnt->mnt_dir))
 			iterator_end(&fp);  /* Restart iteration */
 	}
 }
@@ -120,7 +103,7 @@ void unmount_regular(void)
 	FILE *fp = NULL;
 
 	while ((mnt = iterator("/proc/mounts", &fp))) {
-		if (!unmount(mnt->mnt_dir))
+		if (!umount(mnt->mnt_dir))
 			iterator_end(&fp);  /* Restart iteration */
 	}
 }

src/pid.c

@@ -69,11 +69,10 @@ int pid_alive(pid_t pid)
  */
 char *pid_get_name(pid_t pid, char *name, size_t len)
 {
-	static char line[64];
-	char *pname = NULL;
-	char path[32];
 	int ret = 1;
 	FILE *fp;
+	char *pname, path[32];
+	static char line[64];
 
 	snprintf(path, sizeof(path), "/proc/%d/status", pid);
 	fp = fopen(path, "r");
@@ -114,8 +113,8 @@ char *pid_file(svc_t *svc)
 pid_t pid_file_read(const char *fn)
 {
 	pid_t pid = 0;
-	char buf[42];
 	FILE *fp;
+	char buf[42];
 
 	fp = fopen(fn, "r");
 	if (!fp)
@@ -158,11 +157,6 @@ int pid_file_set(svc_t *svc, char *file, int not)
 		file++;
 	}
 
-	if (svc_is_forking(svc) && !not) {
-		logit(LOG_WARNING, "Service %s is forking, adjusting to pid:!%s", svc->name, file);
-		not = 1;
-	}
-
 	pid_runpath(file, &svc->pidfile[not], sizeof(svc->pidfile) - not);
 	if (not)
 		svc->pidfile[0] = '!';
@@ -205,8 +199,8 @@ int pid_file_parse(svc_t *svc, char *arg)
 
 	/* 'pid:' implies argument following*/
 	if (!strncmp(arg, "pid:", 4)) {
-		char path[MAX_ARG_LEN];
 		int len, not = 0;
+		char path[MAX_ARG_LEN];
 
 		arg += 4;
 		if ((arg[0] == '!' && arg[1] == '/') || arg[0] == '/')

src/reboot.c

@@ -160,8 +160,6 @@ int reboot_main(int argc, char *argv[])
 	transform(NULL);
 
 	if (force) {
-		sync();
-
 		switch (cmd) {
 		case CMD_REBOOT:
 			c = reboot(RB_AUTOBOOT);
@@ -176,9 +174,9 @@ int reboot_main(int argc, char *argv[])
 			break;
 
 		case CMD_SUSPEND:
-			c = suspend();
+			c = reboot(RB_SW_SUSPEND);
 			if (c && errno == EINVAL)
-				errx(1, "Kernel does not support suspend to RAM.");
+				errx(1, "Kernel does not support suspend.");
 			break;
 
 		case CMD_UNKNOWN:

src/serv.c

@@ -34,24 +34,9 @@
 # include <lite/lite.h>
 #endif
 
-#include "client.h"
 #include "initctl.h"
 
 
-static int is_builtin(char *arg)
-{
-	svc_t *svc;
-
-	svc = client_svc_find(arg);
-	if (!svc)
-		return 0;
-
-	if (svc->file[0])
-		return 0;
-
-	return 1;
-}
-
 static int calc_width(char *arr[], size_t len)
 {
 	int width = 0;
@@ -307,8 +292,6 @@ int serv_touch(char *arg)
 	if (!fexist(fn)) {
 		if (!strstr(arg, "finit.conf"))
 			errx(1, "%s not available.", arg);
-		if (is_builtin(arg))
-			errx(1, "%s is a built-in service.", arg);
 
 		strlcpy(path, FINIT_CONF, sizeof(path));
 		fn = path;
@@ -328,9 +311,6 @@ int serv_show(char *arg)
 
 	fn = conf(path, sizeof(path), arg, 0);
 	if (!fexist(fn)) {
-		if (is_builtin(arg))
-			errx(1, "%s is a built-in service.", arg);
-
 		warnx("Cannot find %s", arg);
 		return 1;
 	}
@@ -365,9 +345,6 @@ static int do_edit(char *arg, int creat)
 
 	fn = conf(path, sizeof(path), arg, creat);
 	if (!fexist(fn)) {
-		if (is_builtin(arg))
-			errx(1, "%s is a built-in service.", arg);
-
 		if (!creat) {
 			warnx("Cannot find %s, use -c flag, create command, or select one of:", arg);
 			return serv_list(NULL);
@@ -394,7 +371,6 @@ int serv_edit(char *arg)
 	if (!arg || !arg[0]) {
 		if (!yorn("Do you want to edit %s (y/N)? ", FINIT_CONF))
 			return 0;
-		arg = "";
 	}
 
 	return do_edit(arg, icreate);
@@ -409,9 +385,6 @@ int serv_creat(char *arg)
 	if (!arg || !arg[0])
 		errx(1, "missing argument to create");
 
-	if (is_builtin(arg))
-		errx(1, "%s is a built-in service.", arg);
-
 	/* Input from a pipe or a proper TTY? */
 	if (isatty(STDIN_FILENO))
 		return do_edit(arg, 1);
@@ -447,11 +420,8 @@ int serv_delete(char *arg)
 	}
 
 	fn = conf(buf, sizeof(buf), arg, 0);
-	if (!fn) {
+	if (!fn)
-		if (is_builtin(arg))
-			errx(1, "%s is a built-in service.", arg);
 		errx(1, FINIT_RCSD " missing on system.");
-	}
 
 	if (!fexist(fn))
 		warnx("cannot find %s", fn);

src/service.c

@@ -558,7 +558,7 @@ static int service_start(svc_t *svc)
 
 			for (i = 0; i < we.we_wordc; i++) {
 				if (strlen(we.we_wordv[i]) >= sizeof(svc->args[i])) {
-					logit(LOG_ERR, "%s: expanded arg. '%s' too long", svc->cmd, we.we_wordv[i]);
+					logit(LOG_ERR, "%s: expanded arg. '%s' too long", we.we_wordv[i]);
 					rc = WRDE_NOSPACE;
 					goto nomem;
 				}
@@ -747,14 +747,6 @@ static int service_stop(svc_t *svc)
 	 */
 	svc_started(svc);
 
-	/*
-	 * Verify there's still something there before we send the reaper.
-	 */
-	if (svc->pid > 1 && !pid_alive(svc->pid)) {
-		svc->pid = 0;
-		return 0;
-	}
-
 	if (!svc->desc[0])
 		do_progress = 0;
 
@@ -931,7 +923,7 @@ static void parse_env(svc_t *svc, char *env)
 		return;
 
 	if (strlen(env) >= sizeof(svc->env)) {
-		_e("%s: env file is too long (>%zu chars)", svc->cmd, sizeof(svc->env));
+		_e("%s: env file is too long (>%d chars)", svc->cmd, sizeof(svc->env));
 		return;
 	}
 
@@ -955,7 +947,7 @@ static void parse_cgroup(svc_t *svc, char *cgroup)
 	}
 
 	if (strlen(ptr) >= sizeof(svc->cgroup)) {
-		_e("%s: cgroup settings too long (>%zu chars)", svc->cmd, sizeof(svc->cgroup));
+		_e("%s: cgroup settings too long (>%d chars)", svc->cmd, sizeof(svc->cgroup));
 		return;
 	}
 
@@ -991,7 +983,7 @@ static void parse_killdelay(svc_t *svc, char *delay)
 static void parse_script(char *type, char *script, char *buf, size_t len)
 {
 	if (access(script, X_OK))
-		logit(LOG_WARNING, "%s:%s is missing or not executable, skipping.", type, script);
+		logit(LOG_WARNING, "%s: %s:%s is missing or not executable, skipping.", type, script);
 	else
 		strlcpy(buf, script, len);
 }
@@ -1162,7 +1154,7 @@ int service_register(int type, char *cfg, struct rlimit rlimit[], char *file)
 	char *dev = NULL;
 	int respawn = 0;
 	int levels = 0;
-	int forking = 0, manual = 0;
+	int manual = 0;
 	int restart_max = SVC_RESPAWN_MAX;
 	int restart_tmo = 0;
 	unsigned oncrash_action = SVC_ONCRASH_IGNORE;
@@ -1221,8 +1213,6 @@ int service_register(int type, char *cfg, struct rlimit rlimit[], char *file)
 			pid = cmd;
 		else if (!strncasecmp(cmd, "name:", 5))
 			name = cmd;
-		else if (!strncasecmp(cmd, "type:forking", 10))
-			forking = 1;
 		else if (!strncasecmp(cmd, "manual:yes", 10))
 			manual = 1;
 		else if (!strncasecmp(cmd, "restart:", 8))
@@ -1334,6 +1324,10 @@ int service_register(int type, char *cfg, struct rlimit rlimit[], char *file)
 			svc_unblock(svc);
 	}
 
+	/* Decode any optional pid:/optional/path/to/file.pid */
+	if (pid && (svc_is_daemon(svc) || svc_is_sysv(svc)) && pid_file_parse(svc, pid))
+		_e("Invalid 'pid' argument to service: %s", pid);
+
 	if (username) {
 		char *ptr = strchr(username, ':');
 
@@ -1411,26 +1405,8 @@ int service_register(int type, char *cfg, struct rlimit rlimit[], char *file)
 		parse_env(svc, env);
 	if (file)
 		strlcpy(svc->file, file, sizeof(svc->file));
-	svc->respawn = respawn;
+	if (respawn)
-	svc->forking = forking;
+		svc->respawn = 1;
-
-	/* Decode any (optional) pid:/optional/path/to/file.pid */
-	if (svc_is_daemon(svc) || svc_is_sysv(svc)) {
-		char tmp[sizeof(svc->name) + 6]; /* pid:! + svc->name */
-
-		/* no pid: set, figure out a default to track this svc */
-		if (!pid && forking) {
-			snprintf(tmp, sizeof(tmp), "pid:!%s", svc->name);
-			pid = tmp;
-			logit(LOG_INFO, "%s: forking but no pid:!file set, guessing -> %s", svc->name, tmp);
-		}
-
-		if (pid && pid_file_parse(svc, pid))
-			logit(LOG_WARNING, "%s: service has invalid 'pid:' config: %s", svc->name, pid);
-
-		if (svc->pidfile[0] == '!')
-			svc->forking = 1;
-	}
 
 	/* Set configured limits */
 	memcpy(svc->rlimit, rlimit, sizeof(svc->rlimit));
@@ -1509,10 +1485,8 @@ void service_monitor(pid_t lost, int status)
 	}
 
 	/* Forking sysv/services declare themselves with pid:!/path/to/pid.file  */
-	if (svc_is_starting(svc) && svc_is_forking(svc)) {
+	if (svc_is_starting(svc) && svc_is_forking(svc))
-		svc->pid = 0;	/* Expect no more activity from this one */
 		return;
-	}
 
 	/* Terminate any children in the same proess group, e.g. logit */
 	kill(-svc->pid, SIGKILL);
@@ -1599,6 +1573,7 @@ static void set_pre_post_envs(svc_t *svc, const char *type)
 		if (!access(fn, R_OK))
 			exist = "1";
 	}
+	setenv("SERVICE_ENV_FILE", fn, 1);
 	setenv("SERVICE_ENV_FILE_EXIST", exist, 1);
 
 #ifdef FINIT_SYSCONFIG
@@ -1871,9 +1846,6 @@ restart:
 
 		if (!svc->pid) {
 			if (svc_is_daemon(svc) || svc_is_tty(svc)) {
-				if (svc_is_forking(svc))
-					break;
-
 				svc_restarting(svc);
 				svc_set_state(svc, SVC_HALTED_STATE);
 

src/sig.c

@@ -207,8 +207,7 @@ void do_iterate_proc(int (*cb)(int, void *), void *data)
 					_d("Skipping %s ...", &file[1]);
 				else
 					if (cb(pid, data)) {
-						_d("PID %d is still alive (%s)", pid, file);
+						print(0, "PID %d is still alive (%s)", pid, file);
-						fclose(fp);
 						break;
 					}
 			}
@@ -324,21 +323,13 @@ void do_shutdown(shutop_t op)
 	/* Unmount any tmpfs before unmounting swap ... */
 	unmount_tmpfs();
 	if (whichp("swapoff"))
-		run_interactive("swapoff -a", "Disabling system swap");
+		run("swapoff -e -a", "swapoff");
 
 	/* ... unmount remaining regular file systems. */
 	unmount_regular();
 
-	/*
+	/* We sit on / so we must remount it read-only */
-	 * We sit on / so we must remount it ro, try all the things!
+	run("mount -n -o remount,ro -t none rootfs /", "mount");
-	 * See the following links for details:
-	 *  - https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=339023
-	 *  - https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/29187
-	 */
-	sync();
-	run("mount -n -o remount,ro -t dummytype dummydev /", NULL);
-	run("mount -n -o remount,ro dummydev /", NULL);
-	run("mount -n -o remount,ro /", "mount");
 
 	/* Call mdadm to mark any RAID array(s) as clean before halting. */
 	mdadm_wait();

src/svc.h

@@ -127,7 +127,6 @@ typedef struct svc {
 	int            starting;       /* ... waiting for pidfile to be re-asserted */
 	int	       runlevels;
 	int            sighup;	       /* This service supports SIGHUP :) */
-	int	       forking;	       /* This is a service/sysv daemon that forks, wait for it ... */
 	svc_block_t    block;	       /* Reason that this service is currently stopped */
 	char           cond[MAX_COND_LEN];
 
@@ -229,7 +228,7 @@ static inline int svc_is_daemon    (svc_t *svc) { return svc && SVC_TYPE_SERVICE
 static inline int svc_is_sysv      (svc_t *svc) { return svc && SVC_TYPE_SYSV    == svc->type; }
 static inline int svc_is_tty       (svc_t *svc) { return svc && SVC_TYPE_TTY     == svc->type; }
 static inline int svc_is_runtask   (svc_t *svc) { return svc && (SVC_TYPE_RUNTASK & svc->type);}
-static inline int svc_is_forking   (svc_t *svc) { return svc && svc->forking; }
+static inline int svc_is_forking   (svc_t *svc) { return (svc_is_daemon(svc) || svc_is_sysv(svc)) && svc->pidfile[0] == '!'; }
 
 static inline int svc_in_runlevel  (svc_t *svc, int runlevel) { return svc && ISSET(svc->runlevels, runlevel); }
 static inline int svc_nohup        (svc_t *svc) { return svc &&  (0 == svc->sighup || 0 != svc->args_dirty); }

src/util.c

@@ -224,7 +224,7 @@ int fngetint(char *path, int *val)
 {
 	char buf[64];
 
-	if (fnread(buf, sizeof(buf), "%s", path) <= 0)
+	if (fnread(buf, sizeof(buf), path) <= 0)
 		return -1;
 
 	errno = 0;
@@ -235,40 +235,6 @@ int fngetint(char *path, int *val)
 	return 0;
 }
 
-/*
- * This is a replacement for the non-working reboot(RB_SW_SUSPEND).  It
- * checks for suspend to RAM support, assuming `mem_sleep` has a sane
- * default, e.g. 'deep' or 's2idle'.  The latter should be possible to
- * select from finit.conf, but for now we go with the kernel default.
- * For more information on kernel sleep states, see:
- * https://www.kernel.org/doc/html/latest/admin-guide/pm/sleep-states.html
- */
-int suspend(void)
-{
-	char buf[80];
-	char *ptr;
-
-	if (fnread(buf, sizeof(buf), "/sys/power/state") <= 0) {
-	opnotsup:
-		errno = EINVAL;
-		return 1;
-	}
-
-	chomp(buf);
-
-	ptr = strtok(buf, " ");
-	while (ptr) {
-		if (!strcmp(ptr, "mem"))
-			break;
-
-		ptr = strtok(NULL, " ");
-	}
-	if (!ptr)
-		goto opnotsup;
-
-	return fnwrite("mem", "/sys/power/state");
-}
-
 int strtobytes(char *arg)
 {
 	int mod = 0, bytes;

src/util.h

@@ -54,13 +54,11 @@ extern char *prognm;
 
 char *progname     (char *arg0);
 
-char *str          (char *fmt, ...)                        __attribute__ ((format (printf, 1, 2)));
+char *str          (char *fmt, ...);
-int   fnread       (char *buf, size_t len, char *fmt, ...) __attribute__ ((format (printf, 3, 4)));
+int   fnread       (char *buf, size_t len, char *fmt, ...);
-int   fnwrite      (char *value, char *fmt, ...)           __attribute__ ((format (printf, 2, 3)));
+int   fnwrite      (char *value, char *fmt, ...);
 int   fngetint     (char *path, int *val);
 
-int   suspend      (void);
-
 int   strtobytes   (char *arg);
 char *sig2str      (int sig);
 int   str2sig      (char *sig);
@@ -87,7 +85,7 @@ int     ttcooked   (void);
 #define ttcooked() 0
 #endif
 
-static __attribute__ ((format (printf, 1, 2))) inline void dbg(char *fmt, ...)
+static inline void dbg(char *fmt, ...)
 {
 	va_list ap;
 

test/Makefile.am

@@ -1,21 +1,6 @@
 SUBDIRS                  = common tenv
 
-EXTRA_DIST		 = skel/bin/busybox-x86_64.md5 skel/sbin/service.sh skel/bin/slay \
+EXTRA_DIST		 = setup-root.sh
-			   skel/cdrom/.empty skel/dev/shm/.empty skel/dev/pts/.empty	  \
-			   skel/etc/inittab skel/etc/hostname skel/etc/fstab 		  \
-			   skel/etc/init.d/rcS skel/etc/init.d/rcK skel/tmp/.empty	  \
-			   skel/etc/init.d/S01-service.sh skel/home/.empty		  \
-			   skel/proc/.empty skel/root/.empty skel/run/.empty		  \
-			   skel/sbin/chrootsetup.sh skel/srv/.empty skel/sys/.empty	  \
-			   skel/usr/bin/.empty skel/usr/lib/.empty skel/usr/sbin/.empty	  \
-			   skel/usr/games/.empty skel/usr/src/.empty			  \
-			   skel/usr/share/.empty skel/usr/include/.empty		  \
-			   skel/usr/local/games/.empty skel/usr/local/sbin/.empty	  \
-			   skel/usr/local/share/.empty skel/usr/local/src/.empty	  \
-			   skel/usr/local/lib/.empty skel/usr/local/bin/.empty		  \
-			   skel/usr/local/etc/.empty skel/var/.empty
-
-EXTRA_DIST		+= setup-root.sh
 EXTRA_DIST		+= add-remove-dynamic-service.sh
 EXTRA_DIST		+= add-remove-dynamic-service-sub-config.sh
 EXTRA_DIST		+= start-stop-service.sh

test/add-remove-dynamic-service-sub-config.sh

@@ -13,12 +13,15 @@ test_teardown()
 	say "Running test teardown."
 
 	texec rm -f "$FINIT_RCSD/service.conf"
+	texec rm -f /test_assets/service.sh
 }
 
 say "Test start $(date)"
 
+cp "$TEST_DIR"/common/service.sh "$TENV_ROOT"/test_assets/
+
 say "Add a dynamic service in $FINIT_RCSD/service.conf"
-texec sh -c "echo 'service [2345] kill:20 log service.sh -- Dyn serv' > $FINIT_RCSD/service.conf"
+texec sh -c "echo 'service [2345] kill:20 log /test_assets/service.sh -- Dyn serv' > $FINIT_RCSD/service.conf"
 
 say 'Reload Finit'
 texec sh -c "initctl reload"

test/add-remove-dynamic-service.sh

@@ -3,6 +3,7 @@
 set -eu
 
 TEST_DIR=$(dirname "$0")
+export DEBUG=1
 
 # shellcheck source=/dev/null
 . "$TEST_DIR/tenv/lib.sh"
@@ -13,12 +14,20 @@ test_teardown()
 	say "Running test teardown."
 
 	texec rm -f "$FINIT_CONF"
+	texec rm -f /test_assets/service.sh
 }
 
+say "Hi, this is /run et al"
+texec sh -c "echo 'ROOT:/bin'; ls -l /bin/; echo 'ROOT:/sbin'; ls -l /sbin/; echo 'ROOT:/run'; ls -l /run/; echo 'ROOT:/run/finit/'; ls -l /run/finit/; echo 'ROOT:/dev'; ls -l /dev/; ps; ls -l /proc/1/fd/"
+say "HUPing PID 1 ..."
+texec sh -c "kill -HUP 1"
+
 say "Test start $(date)"
 
+cp "$TEST_DIR"/common/service.sh "$TENV_ROOT"/test_assets/
+
 say "Add a dynamic service in $FINIT_CONF"
-texec sh -c "echo 'service [2345] kill:20 log service.sh -- Dyn service' > $FINIT_CONF"
+texec sh -c "echo 'service [2345] kill:20 log /test_assets/service.sh -- Dyn service' > $FINIT_CONF"
 
 say 'Reload Finit'
 texec sh -c "initctl reload"

test/common/Makefile.am

@@ -1,2 +1,4 @@
+EXTRA_DIST	= service.conf service.sh S01-service.sh slay.sh
+
 noinst_PROGRAMS = serv
 serv_SOURCES    = serv.c

test/common/S01-service.sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # SysV style start script for service.sh
 
-DAEMON="/sbin/service.sh"
+DAEMON="/test_assets/service.sh"
 PIDFILE="/var/run/service.pid"
 
 start()

test/common/service.conf

@@ -0,0 +1 @@
+service [2345] kill:20 log /test_assets/service.sh

test/setup-root.sh

@@ -5,9 +5,6 @@ set -eu
 # shellcheck disable=SC2154
 make -C "$top_builddir" DESTDIR="$TENV_ROOT" install
 
-mkdir -p "$TENV_ROOT/sbin/"
-cp "$top_builddir/test/common/serv" "$TENV_ROOT/sbin/"
-
 # shellcheck disable=SC2154
 FINITBIN="$(pwd)/$top_builddir/src/finit" DEST="$TENV_ROOT" make -f "$srcdir/tenv/root.mk"
 
@@ -15,3 +12,13 @@ FINITBIN="$(pwd)/$top_builddir/src/finit" DEST="$TENV_ROOT" make -f "$srcdir/ten
 for plugin in tty.so urandom.so rtc.so modprobe.so hotplug.so; do
 	find "$TENV_ROOT" -name $plugin -delete
 done
+
+echo "$TENV_ROOT:"
+ls -l "$TENV_ROOT"
+echo "$TENV_ROOT:/bin"
+ls -l "$TENV_ROOT"/bin
+echo "$TENV_ROOT:/sbin"
+ls -l "$TENV_ROOT"/sbin
+echo "$TENV_ROOT:/var"
+ls -l "$TENV_ROOT"/var/
+

test/signal-service.sh

@@ -14,15 +14,18 @@ test_teardown()
 	say "Running test teardown."
 
 	texec rm -f "$FINIT_CONF"
+	texec rm -f /test_assets/service.sh
 }
 
 say "Test start $(date)"
 
+cp "$TEST_DIR"/common/service.sh "$TENV_ROOT"/test_assets/
+
 say 'Ensure file system is cleared'
 texec rm -f /tmp/usr1.log
 
 say "Add service stanza in $FINIT_CONF"
-texec sh -c "echo 'service [2345] kill:20 log service.sh -- Test service' > $FINIT_CONF"
+texec sh -c "echo 'service [2345] kill:20 log /test_assets/service.sh -- Test service' > $FINIT_CONF"
 
 say 'Reload Finit'
 texec sh -c "initctl reload"

test/skel/etc/hostname

@@ -1 +0,0 @@
-test

test/skel/etc/init.d/rcK

@@ -1,4 +0,0 @@
-#!/bin/sh
-
-echo "Shutting down ..."
-exit 0

test/skel/etc/init.d/rcS

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-echo "Starting up ..."
-poweroff -d 2
-

test/skel/etc/inittab

@@ -1,40 +0,0 @@
-# /etc/inittab
-#
-# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
-#
-# Note: BusyBox init doesn't support runlevels.  The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use
-# sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id        == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action    == one of sysinit, respawn, askfirst, wait, and once
-# process   == program to run
-
-# Startup the system
-#::sysinit:/bin/mount -t proc proc /proc
-#::sysinit:/bin/mount -o remount,rw /
-#::sysinit:/bin/mkdir -p /dev/pts /dev/shm
-#::sysinit:/bin/mount -a
-#::sysinit:/bin/mkdir -p /run/lock/subsys
-#::sysinit:/sbin/swapon -a
-null::sysinit:/bin/ln -sf /proc/self/fd /dev/fd
-null::sysinit:/bin/ln -sf /proc/self/fd/0 /dev/stdin
-null::sysinit:/bin/ln -sf /proc/self/fd/1 /dev/stdout
-null::sysinit:/bin/ln -sf /proc/self/fd/2 /dev/stderr
-::sysinit:/bin/hostname -F /etc/hostname
-# now run any rc scripts
-::sysinit:/etc/init.d/rcS
-
-# Put a getty on the serial port
-#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 # GENERIC_SERIAL
-
-# Stuff to do for the 3-finger salute
-#::ctrlaltdel:/sbin/reboot
-
-# Stuff to do before rebooting
-::shutdown:/etc/init.d/rcK
-#::shutdown:/sbin/swapoff -a
-#::shutdown:/bin/umount -a -r

test/start-kill-service.sh

@@ -15,13 +15,17 @@ test_teardown()
 	say "Running test teardown."
 
 	texec rm -f "$FINIT_CONF"
+	texec rm -f /test_assets/service.sh
 }
 
 say "Test start $(date)"
+
+cp "$TEST_DIR"/common/slay.sh    "$TENV_ROOT"/test_assets/
+cp "$TEST_DIR"/common/service.sh "$TENV_ROOT"/test_assets/
 rm -f "$TENV_ROOT"/oldpid
 
 say "Add service stanza in $FINIT_CONF"
-texec sh -c "echo 'service [2345] respawn log service.sh -- Test service' > $FINIT_CONF"
+texec sh -c "echo 'service [2345] respawn log /test_assets/service.sh -- Test service' > $FINIT_CONF"
 
 say 'Reload Finit'
 texec sh -c "initctl reload"
@@ -36,7 +40,7 @@ laps=1000
 while [ $i -lt $laps ]; do
 	i=$((i + 1))
 	say "Lap $i/$laps, killing service ..." # we have this, no sleep needed
-	texec sh -c "slay service.sh"
+	texec sh -c "/test_assets/slay.sh service.sh"
 done
 
 retry 'assert_new_pid service.sh /run/service.pid'

test/start-stop-serv.sh

@@ -6,6 +6,7 @@ TEST_DIR=$(dirname "$0")
 test_setup()
 {
 	say "Test start $(date)"
+	cp "$TENV_ROOT"/../common/serv "$TENV_ROOT"/test_assets/
 }
 
 test_teardown()
@@ -14,6 +15,7 @@ test_teardown()
 	say "Running test teardown."
 
 	texec rm -f "$FINIT_CONF"
+	texec rm -f /test_assets/serv
 }
 
 test_one()
@@ -55,12 +57,11 @@ test_one()
 # shellcheck source=/dev/null
 . "$TEST_DIR/tenv/lib.sh"
 
-test_one "/run/serv.pid"  "service pid:!/run/serv.pid serv -- Forking service, type 1"
+test_one "/run/serv.pid"  "service pid:!/run/serv.pid /test_assets/serv -- Forking service"
-test_one "/run/serv.pid"  "service type:forking       serv -- Forking service, type 2"
 # This one could never be started by and monitored by Finit: it forks to
 # background and does not create a PID file.  Essentially it's lost to
 # Finit, and any other sane process monitor.
-#test_one "/run/serv.pid"  "service pid:/run/serv.pid  serv -p -- Forking service w/o PID file"
+#test_one "/run/serv.pid"  "service pid:/run/serv.pid  /test_assets/serv -p -- Forking service w/o PID file"
-test_one "/run/serv.pid"  "service pid:/run/serv.pid  serv -n -- Foreground service w/o PID file"
+test_one "/run/serv.pid"  "service pid:/run/serv.pid  /test_assets/serv -n -- Foreground service w/o PID file"
-test_one "/run/serv.pid"  "service                    serv -n -p -- Foreground service w/ PID file"
+test_one "/run/serv.pid"  "service                    /test_assets/serv -n -p -- Foreground service w/ PID file"
-test_one "/run/servy.pid" "service pid:/run/servy.pid serv -n -p -P /run/servy.pid -- Foreground service w/ custom PID file"
+test_one "/run/servy.pid" "service pid:/run/servy.pid /test_assets/serv -n -p -P /run/servy.pid -- Foreground service w/ custom PID file"

test/start-stop-service-sub-config.sh

@@ -13,19 +13,19 @@ test_teardown()
 	say "Running test teardown."
 
 	texec rm -f "$FINIT_RCSD/service.conf"
+	texec rm -f /test_assets/service.sh
 }
 
 say "Test start $(date)"
 
+cp "$TEST_DIR"/common/service.sh "$TENV_ROOT"/test_assets/
+
 say "Add service stanza in $FINIT_RCSD/service.conf"
-texec sh -c "echo 'service [2345] kill:20 log service.sh -- Subserv' > $FINIT_RCSD/service.conf"
+texec sh -c "echo 'service [2345] kill:20 log /test_assets/service.sh -- Subserv' > $FINIT_RCSD/service.conf"
 
 say 'Reload Finit'
 texec sh -c "initctl reload"
 
-sleep 2
-texec sh -c "ps"
-
 retry 'assert_num_children 1 service.sh'
 
 say 'Stop the service'

test/start-stop-service.sh

@@ -13,12 +13,15 @@ test_teardown()
 	say "Running test teardown."
 
 	texec rm -f "$FINIT_CONF"
+	texec rm -f /test_assets/service.sh
 }
 
 say "Test start $(date)"
 
+cp "$TEST_DIR"/common/service.sh "$TENV_ROOT"/test_assets/
+
 say "Add service stanza in $FINIT_CONF"
-texec sh -c "echo 'service [2345] kill:20 log service.sh -- Test service' > $FINIT_CONF"
+texec sh -c "echo 'service [2345] kill:20 log /test_assets/service.sh -- Test service' > $FINIT_CONF"
 
 say 'Reload Finit'
 texec sh -c "initctl reload"

test/start-stop-sysv.sh

@@ -12,12 +12,17 @@ test_teardown() {
     say "Running test teardown."
 
     texec rm -f "$FINIT_CONF"
+    texec rm -f /test_assets/service.sh
 }
 
 say "Test start $(date)"
 
+cp "$TEST_DIR"/common/service.sh     "$TENV_ROOT"/test_assets/
+cp "$TEST_DIR"/common/S01-service.sh "$TENV_ROOT"/test_assets/
+chmod +x "$TENV_ROOT"/test_assets/*.sh
+
 say "Add sysv stanza in $FINIT_CONF"
-texec sh -c "echo 'sysv [2345] pid:!/run/service.pid name:service.sh /etc/init.d/S01-service.sh -- SysV test service' > $FINIT_CONF"
+texec sh -c "echo 'sysv [2345] pid:!/run/service.pid name:service.sh /test_assets/S01-service.sh -- SysV test service' > $FINIT_CONF"
 
 say 'Reload Finit'
 texec sh -c "initctl reload"

test/tenv/Makefile.am

@@ -1 +1,2 @@
-EXTRA_DIST	 = lib.sh exec.sh start.sh root.mk
+EXTRA_DIST	 = lib.sh exec.sh start.sh root.mk busybox-x86_64.md5
+EXTRA_DIST	+= chrootsetup.sh

test/tenv/chrootsetup.sh

@@ -12,7 +12,7 @@
 # furnished to do so, subject to the following conditions:
 #
 # The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
+#     all copies or substantial portions of the Software.
 #
 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
@@ -23,14 +23,11 @@
 # THE SOFTWARE.
 
 set -eu
-export PATH=$PATH:/usr/bin:/usr/sbin
 
 # It would have been nice to mount /dev as devtmpfs, but unfortunately
 # that's not possible if you're not privileged. For now tmpfs will
 # have to do.
 mount -n -t tmpfs none /dev
-# Silence BusyBox init
-touch /dev/null
 
 mount -t proc none /proc
 mount -t sysfs none /sys

test/tenv/lib.sh

@@ -154,12 +154,13 @@ if [ -n "${DEBUG:-}" ]; then
 	FINIT_ARGS="${FINIT_ARGS:-} finit.debug=on"
 fi
 # shellcheck disable=2086
-"$TEST_DIR/tenv/start.sh" finit ${FINIT_ARGS:-} &
+"$TEST_DIR/tenv/start.sh" finit ${FINIT_ARGS:-} finit.debug=on &
 finit_ppid=$!
 echo "$finit_ppid" > "$TENV_ROOT"/running_test.pid
 
+>&2 echo "Finit runs as PID $finit_ppid outside of container."
 >&2 echo "Hint: Execute 'TENV_ROOT=$TENV_ROOT $TEST_DIR/tenv/enter.sh' to enter the test namespace"
-log "$color_reset" 'Setup of test environment done, waiting for Finit to start up ...' ''
+log "$color_reset" 'Setup of test environment done' ''
 
 finit_pid=$(retry "pgrep -P $finit_ppid")
 
@@ -169,4 +170,5 @@ fi
 
 #tty=/dev/$(texec cat /sys/class/tty/console/active)
 #texec cat "$tty" &
-#sleep 1
+sleep 5
+

test/tenv/root.mk

@@ -20,9 +20,8 @@
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 # THE SOFTWARE.
 
-srcdir         ?= ../
-SKEL           ?= $(srcdir)/skel
 DEST           ?= ../tenv-root
+srcdir         ?= ../
 
 CACHE          ?= ~/.cache
 ARCH           ?= x86_64
@@ -31,27 +30,60 @@ FINITBIN       ?= ./sbin/finit
 
 BBVER          ?= 1.31.0
 BBBIN           = busybox-$(ARCH)
-BBHOME         ?= https://www.busybox.net/downloads/binaries
+BBURL          ?= https://www.busybox.net/downloads/binaries/$(BBVER)-defconfig-multiarch-musl/$(BBBIN)
-BBURL          ?= $(BBHOME)/$(BBVER)-defconfig-multiarch-musl/$(BBBIN)
+
+binaries        = $(DEST)/bin/awk		\
+		$(DEST)/bin/cat			\
+		$(DEST)/bin/cp			\
+		$(DEST)/bin/date		\
+		$(DEST)/bin/echo		\
+		$(DEST)/bin/env			\
+		$(DEST)/bin/find		\
+		$(DEST)/bin/grep		\
+		$(DEST)/bin/kill		\
+		$(DEST)/bin/ls			\
+		$(DEST)/bin/mkdir		\
+		$(DEST)/bin/mkfifo		\
+		$(DEST)/bin/mknod		\
+		$(DEST)/bin/mount		\
+		$(DEST)/bin/printf		\
+		$(DEST)/bin/pgrep		\
+		$(DEST)/bin/ps			\
+		$(DEST)/bin/rm			\
+		$(DEST)/bin/sh			\
+		$(DEST)/bin/sleep		\
+		$(DEST)/bin/tail		\
+		$(DEST)/bin/top			\
+		$(DEST)/bin/touch		\
+		$(DEST)/bin/start-stop-daemon
+
+dirs            = $(DEST)/bin			\
+		$(DEST)/dev			\
+		$(DEST)/etc			\
+		$(DEST)/proc			\
+		$(DEST)/sbin			\
+		$(DEST)/var			\
+		$(DEST)/run			\
+		$(DEST)/sys			\
+		$(DEST)/test_assets		\
+		$(DEST)/tmp
 
 _libs_src       = $(shell ldd $(FINITBIN) | grep -Eo '/[^ ]+')
 libs            = $(foreach path,$(_libs_src),$(abspath $(DEST))$(path))
 
-all: $(libs) $(DEST)/bin/$(BBBIN)
+all: $(dirs) $(binaries) $(libs) $(DEST)/bin/chrootsetup.sh
-	@(cd $(DEST);					\
+	touch $(DEST)/etc/fstab
-	for prg in `./bin/$(BBBIN) --list-full`; do 	\
+
-		ln -sf /bin/$(BBBIN) $$prg;		\
+$(dirs):
-	done)
+	mkdir -p $@
 
 $(DEST)/bin/$(BBBIN).md5:
-	@mkdir -p $(DEST)
+	cp $(srcdir)/tenv/$(notdir $@) $@
-	@cp -a $(SKEL)/* $(DEST)/
-	@chmod -R u+w $(DEST)/
-	@find $(DEST) -name .empty -delete
 
+.PHONY: $(DEST)/bin/$(BBBIN)
 $(DEST)/bin/$(BBBIN): $(DEST)/bin/$(BBBIN).md5
-	@(cd $(dir $@);								\
+	@cd $(dir $@)
-	if ! md5sum --status -c $(BBBIN).md5 2>/dev/null; then			\
+	@if ! md5sum --status -c $(BBBIN).md5 2>/dev/null; then			\
 		if [ -d $(CACHE) ]; then					\
 			echo "Cannot find $(BBBIN), checking $(CACHE) ...";	\
 			cd $(CACHE);						\
@@ -69,9 +101,17 @@ $(DEST)/bin/$(BBBIN): $(DEST)/bin/$(BBBIN).md5
 		fi;								\
 		cd $(dir $@);							\
 		md5sum -c $(BBBIN).md5;						\
-	fi)
+	fi
 	@chmod +x $@
 
-$(libs): $(DEST)/bin/$(BBBIN).md5
+$(DEST)/bin/chrootsetup.sh:
+	cp $(srcdir)/tenv/$(notdir $@) $@
+
+$(binaries): $(DEST)/bin/$(BBBIN)
+	cd $(DEST)/bin; \
+	  rm -f $(notdir $@); \
+	  ln -s $(BBBIN) $(notdir $@)
+
+$(libs):
 	mkdir -p $(dir $@)
 	cp $(patsubst $(abspath $(DEST))%,%,$@) $@

test/tenv/start.sh

@@ -46,4 +46,4 @@ exec "$unshare"						\
      --mount						\
      --mount-proc					\
      --uts --ipc --net					\
-     "$chroot" "$TENV_ROOT" /sbin/chrootsetup.sh "$@"
+     "$chroot" "$TENV_ROOT" /bin/chrootsetup.sh "$@"

test/test.env.in

@@ -1,6 +1,6 @@
 prefix=@prefix@
 exec_prefix=@exec_prefix@
 
-export TESTENV_PATH=/bin:/sbin:/usr/bin:/usr/sbin:"@bindir@":"@sbindir@"
+export TESTENV_PATH=/bin:/sbin:"@bindir@":"@sbindir@"
 export FINIT_CONF="@FINIT_CONF@"
 export FINIT_RCSD="@FINIT_RCSD@"