Update ChangeLog and bump version for v4.11 release

Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
doc: clarify what is required for moving from runlevel S to 2
2026-10-12 10:12:32 +00:00 · 2025-03-27 10:28:39 +01:00 · 2025-03-27 10:23:11 +01:00 · 2025-03-27 10:23:10 +01:00 · 2025-03-27 07:00:54 +01:00 · 2025-03-22 19:27:41 +01:00
138 changed files with 2786 additions and 1049 deletions
@@ -24,7 +24,8 @@ the maintainer(s) and make it easier for them to include your code.
 Coding Style
 ------------

-> **Tip:** Always submit code that follows the style of surrounding code!
+> [!TIP]
+> Always submit code that follows the style of surrounding code!

 First of all, lines are allowed to be longer than 72 characters these
 days.  In fact, there exist no enforced maximum, but keeping it around
@@ -21,26 +21,25 @@ jobs:
        compiler: [gcc, clang]
      fail-fast: false
    env:
-      MAKEFLAGS: -j3
      CC: ${{ matrix.compiler }}
    steps:
      - name: Install dependencies
        run: |
          sudo apt-get -y update
          sudo apt-get -y install pkg-config tree jq libuev-dev libite-dev
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Static Finit
        run: |
          ./autogen.sh
          ./configure --prefix= --enable-static
-          make V=1
+          make -j3 V=1
      - name: Regular Finit
        run: |
          ./configure --prefix=/usr --exec-prefix= --sysconfdir=/etc --localstatedir=/var \
                      --enable-x11-common-plugin --enable-testserv-plugin --with-watchdog \
                      --with-keventd
-          make clean
-          make V=1
+          make -j3 clean
+          make -j3 V=1
      - name: Install to /tmp
        run: |
          DESTDIR=/tmp make install-strip
@@ -57,11 +56,14 @@ jobs:
        run: |
          sudo /tmp/sbin/finit -h
          sudo /tmp/sbin/initctl -h
+      - name: Enable unprivileged userns (unshare)
+        run: |
+          sudo sysctl kernel.apparmor_restrict_unprivileged_userns=0
      - name: Run Unit Tests
        run: |
          make check || (cat test/test-suite.log; false)
      - name: Upload Test Results
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: finit-test-${{ matrix.compiler }}
          path: test/*.log
@@ -4,6 +4,7 @@ on:
  push:
    branches:
      - 'dev'
+  workflow_dispatch:

 env:
  PROJECT_NAME: finit
@@ -15,22 +16,39 @@ jobs:
  coverity:
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v3
-      - uses: actions/cache@v3
-        id: coverity-toolchain-cache
-        with:
-          path: cov-analysis-linux64
-          key: ${{ runner.os }}-coverity
-      - name: Download Coverity Scan
-        if: steps.coverity-toolchain-cache.outputs.cache-hit != 'true'
+      - uses: actions/checkout@v4
+      - name: Fetch latest Coverity Scan MD5
+        id: var
        env:
          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
        run: |
-          wget -q https://scan.coverity.com/download/cxx/linux64 \
-               --post-data "token=$TOKEN&project=${COVERITY_PROJ}" \
-               -O cov-analysis-linux64.tar.gz
-          mkdir cov-analysis-linux64
-          tar xzf cov-analysis-linux64.tar.gz --strip 1 -C cov-analysis-linux64
+          wget -q https://scan.coverity.com/download/cxx/linux64         \
+               --post-data "token=$TOKEN&project=${COVERITY_PROJ}&md5=1" \
+               -O coverity-latest.tar.gz.md5
+          echo "md5=$(cat coverity-latest.tar.gz.md5)" | tee -a $GITHUB_OUTPUT
+      - uses: actions/cache@v4
+        id: cache
+        with:
+          path: coverity-latest.tar.gz
+          key: ${{ runner.os }}-coverity-${{ steps.var.outputs.md5 }}
+          restore-keys: |
+            ${{ runner.os }}-coverity-${{ steps.var.outputs.md5 }}
+            ${{ runner.os }}-coverity-
+            ${{ runner.os }}-coverity
+      - name: Download Coverity Scan
+        env:
+          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
+        run: |
+          if [ ! -f coverity-latest.tar.gz ]; then
+            wget -q https://scan.coverity.com/download/cxx/linux64   \
+                 --post-data "token=$TOKEN&project=${COVERITY_PROJ}" \
+                 -O coverity-latest.tar.gz
+          else
+            echo "Latest Coverity Scan available from cache :-)"
+            md5sum coverity-latest.tar.gz
+          fi
+          mkdir coverity
+          tar xzf coverity-latest.tar.gz --strip 1 -C coverity
      - name: Install dependencies
        run: |
          sudo apt-get -y update
@@ -42,13 +60,15 @@ jobs:
          (cd libuev-2.4.0 && ./configure --prefix=/usr && make && sudo make install-strip)
          (cd libite-2.5.2 && ./configure --prefix=/usr && make && sudo make install-strip)
          sudo ldconfig
-      - name: Build
+      - name: Configure
        run: |
          ./autogen.sh
          ./configure --prefix= --enable-x11-common-plugin --with-watchdog --with-keventd
-          export PATH=`pwd`/cov-analysis-linux64/bin:$PATH
+      - name: Build
+        run: |
+          export PATH=`pwd`/coverity/bin:$PATH
          cov-build --dir cov-int make
-      - name: Submit result to Coverity Scan
+      - name: Submit results to Coverity Scan
        env:
          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
        run: |
@@ -61,3 +81,8 @@ jobs:
            --form version=trunk \
            --form description="${PROJECT_NAME} $(git rev-parse HEAD)" \
            https://scan.coverity.com/builds?project=${COVERITY_PROJ}
+      - name: Upload build.log
+        uses: actions/upload-artifact@v4
+        with:
+          name: coverity-build.log
+          path: cov-int/build-log.txt
@@ -13,7 +13,7 @@ jobs:
    env:
      MAKEFLAGS: -j3
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Installing dependencies ...
        run: |
          sudo apt-get -y update
@@ -23,17 +23,25 @@ jobs:
        run: |
          ver=${GITHUB_REF#refs/tags/}
          echo "ver=${ver}" >> $GITHUB_OUTPUT
-          if echo $ver | grep -qE '[0-9.]+(-alpha|-beta|-rc)[0-9]*'; then
+          if echo $ver | grep -qE '^[0-9]+\.[0-9]+(\.[0-9]+)?(-alpha|-beta|-rc)[0-9]*$'; then
            echo "pre=true"  >> $GITHUB_OUTPUT
          else
            echo "pre=false" >> $GITHUB_OUTPUT
          fi
+          if echo $ver | grep -qE '^[0-9.]+\.[0-9.]+(\.[0-9]+)?$'; then
+            echo "latest=true"  >> $GITHUB_OUTPUT
+          else
+            echo "latest=false" >> $GITHUB_OUTPUT
+          fi
      - name: Creating Makefiles ...
        run: |
          ./autogen.sh
          ./configure  --prefix=/usr --exec-prefix= --sysconfdir=/etc --localstatedir=/var \
                       --enable-x11-common-plugin --enable-testserv-plugin --with-watchdog \
                       --with-keventd
+      - name: Enable unprivileged userns (unshare)
+        run: |
+          sudo sysctl kernel.apparmor_restrict_unprivileged_userns=0
      - name: Build release ...
        run: |
          make release || (cat test/test-suite.log; false)
@@ -48,6 +56,7 @@ jobs:
      - uses: ncipollo/release-action@v1
        with:
          name: Finit v${{ github.ref_name }}
-          prerelease: ${{ needs.build.outputs.pre }}
+          prerelease: ${{ steps.build.outputs.pre }}
+          makeLatest: ${{ steps.build.outputs.latest }}
          bodyFile: "release.md"
          artifacts: "artifacts/*"
@@ -13,7 +13,7 @@ jobs:
    outputs:
      run: ${{ steps.check.outputs.run }}
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Check for any commits since last week
        id: schedule
        run: |
@@ -25,14 +25,14 @@ jobs:
          fi
  distcheck:
    needs: schedule
-    if: ${{ needs.schedule.outputs.run }}
+    if: ${{ needs.schedule.outputs.run == 'true' }}
    runs-on: ubuntu-latest
    steps:
      - name: Install dependencies
        run: |
          sudo apt-get -y update
          sudo apt-get -y install pkg-config jq libuev-dev libite-dev
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Base run
        run: |
          ./autogen.sh
@@ -41,6 +41,9 @@ jobs:
      - name: Install to /tmp
        run: |
          DESTDIR=/tmp make install-strip
+      - name: Enable unprivileged userns (unshare)
+        run: |
+          sudo sysctl kernel.apparmor_restrict_unprivileged_userns=0
      - name: Check dist tarball
        run: |
          ver=$(/tmp/sbin/initctl -V | awk '/Finit.*/ {print $2;}')
@@ -14,6 +14,7 @@ GTAGS
 /autom4te.cache
 /aclocal.m4
 /ar-lib
+/backup/
 /compile
 /config.cache
 /config.h
@@ -36,6 +37,9 @@ GTAGS
 /test-driver
 /test-suite.log

+# Misc
+/.gdb_history
+
 # TroglOS build system
 /.config
 /.stamp
@@ -3,8 +3,174 @@ Change Log

 All relevant changes are documented in this file.

+[4.11][] - 2025-03-27
+---------------------

-[4.5][] - 2023-10-03
+### Changes
+ - Update documentation regarding transition from runlevel S to 2, how
+   run/tasks must "complete" before Finit can move to the next runlevel
+ - Improve argument handling in bundled getty when launching login
+
+### Fixes
+ - Fix #432: allow services in `setup` state to be stopped.  This fixes
+   a serious blocker introduced in 4.10 that prevented systems from
+   being rebooted when any service was in this state
+ - Fix fallback `SIGKILL` when stopping a service with `SIGTERM` does
+   not work.  This fixes a serious issue with services not responding to
+   the default `SIGTERM`
+ - Fix pre/post/ready/cleanup script execution if service has an
+   optional `env:file` (leading `-`)
+
+
+[4.10][] - 2025-03-03
+---------------------
+
+### Changes
+ - Add support for `cleanup:[0-3600,]script`, runs before service is
+   removed, unlike `post:script` that runs when service is stopped
+ - Improved entropy gathering in tertiary fallback of urandom plugin
+ - Reclassify `sysv` from run/task class to `service`
+
+### Fixes
+ - Fix #427: using an external getty with custom login program cause
+   Finit to use login program as the getty command
+ - Fix #428: allow `sysctl` path to be set at build time
+ - Fix #429: regression in v4.9 causing Finit to segfault at shutdown
+ - Fix possible memory leak when sourcing a service `env:file`
+ - Finit now waits until all `post:scripts` have run before returning
+   OK to `initctl <reload|runlevel>`.  This also applies to the new
+   `cleanup:scripts` introduced in this release
+ - RFC3154 conformance formatting fix for `/dev/kmsg` fallback logging
+
+
+[4.9][] - 2025-02-15
+--------------------
+
+> [!CAUTION]
+> This release changes how Finit reacts to the exit status of `pre:`
+> scripts.  Finit will now no longer start the main process if its
+> `pre:` script fails for any reason.  So, if you have pre scripts that,
+> e.g., create directories, make sure they are idempotent.
+
+### Changes
+ - Add individual timeout (optional) support for pre/post/ready scripts
+ - Add support for systems with broken RTC, i.e., those that at power-on
+   may reset the RTC to a random date instead of zero, issue #418
+ - Add support for detecting "in-container" when in `systemd-nspawn`
+ - Check exit status of `pre:` scripts, on failure drive service/sysv to
+   `crashed` state.  (The exit code of `post:` scripts remain ignored)
+ - All pre/post/ready scripts are now also searched for in `$PATH`
+ - Reset color attributes and clear screen when starting up.  This is
+   for boot loaders like GRUB, which leave background color artifacts
+
+### Fixes
+ - Fix #415: only mark reverse-dependencies "dirty" if the main service
+   does not support SIGHUP.  This helps avoid unnecessary restarts of
+   services that depend on a service that supports SIGHUP
+ - Fix #417: leaking inotify watchers in the cgroup subsystem
+ - Fix #421: add support for `nofail` mount option in `/etc/fstab`
+ - Fix #425: ordering bug in detecting .conf file changes to services
+   and `initctl reload`, or runlevel changes
+ - Fix `initctl touch` of template services, previously marking a
+   service created from a template as "dirty" did not take
+ - Fix unintended restart of template "siblings".  I.e., `initctl touch`
+   of instantiated template service A affected B from same template
+ - Fix buggy `--with-rtc-date=DATE` configure option
+ - Fix kill on timeout of pre/post/ready scripts
+
+
+[4.8][] - 2024-10-13
+--------------------
+
+### Changes
+ - Avoid remounting already mounted `/run` and `/tmp` directories.  This
+   extends the existing support for detecting mounted directories to
+   include complex mount hierarchies are in use, overlayfs and tmpfs
+   mounts.  Feature by Mathias Thore, Atlas Copco
+ - getty: trigger /etc/issue compat mode for Alpine Linux
+ - tmpfiles.d: skip `x11.conf` unless X11 common plugin is enabled
+ - tmpfiles.d: ignore x/X command, nos support for cleanup at runtime
+ - Drop debug mode `-D` from `udevd` in `hotplug.conf.in`, allow the
+   user to set this in `/etc/default/udevd` instead
+ - Certain initctl APIs at bootstrap are not supported, update warning
+   log to include command (number) for troubleshooting, issue #398
+ - Add support for hwrng to urandom plugin and check for empty seed
+ - Add `runparts -b` (batch mode) support, disables escape sequences
+ - New configure `--without-rc-local`, disables `/etc/rc.local` support
+ - New configure `--disable-cgroup` option, disables cgroup v2 detection
+ - `initctl show template@foo.conf` now shows how an enabled template
+   service has been evaluated by Finit, issue #411
+ - Extend `initctl` timeout connecting and waiting for Finit reply.  The
+   previous 2 + 2 second poll timeout has proved to be too short on more
+   complex systems.  Now a 15 + 15 second timeout is applied which should
+   be more resistant to temporary overload scenarios, issue #407
+
+### Fixes
+ - Fix #397: system shutdown/reboot can block on console input if action
+   is started remotely (ssh).  Caused by legacy TTY screen size probing,
+   removed from both bootstrap and shutdown/reboot
+ - Fix #400: both `HOOK_MOUNT_ERROR` and `sulogin()` fail to trigger on
+   either mount or `fsck` errors.  Problem caused by unresolved status
+   from pipe, calling `pclose()` without extracting exit status
+ - Fix #402: `initctl touch` does not respect `-n` (no error) flag
+ - Fix #403: `initctl touch` does not support template services
+ - Fix #404: possible undefined behavior when `--with-fstab=no` is set
+ - Fix #405: `@console` getty does not work with `tty0 ttyS0`
+ - Fix #409: prevent tmpfiles from following symlinks for `L+` and `R`,
+   otherwise symlink targets would also be removed.  Found and fixed by
+   Mathias Thore and Ming Liu, Atlas Copco
+ - Fix #414: Frr Zebra immediately restarts on `initctl stop zebra`.
+   The fix likely works for all Frr/Quagga services due to the way they
+   create and delete their pid file
+ - Cosmetic issue with `[ OK ]` messages being printed out of order at
+   shutdown/reboot.  Caused by nested calls to `service_stop()`
+ - Cosmetic issue with duplicate "Restoring RTC" message at bootstrap
+
+
+[4.7][] - 2024-01-07
+--------------------
+
+### Changes
+- Silence "not available" messages for run/task/service with `nowarn`
+- Update docs, `cgroup.root` workaround for `SCHED_RR` tasks
+- Drop runlevels 0 and 6 from `keventd`, not needed at reboot/poweroff
+- Mount `/dev/shm` with mode 1777 (sticky bit)
+- Mount `/dev/mqueue` if available, inspiration from Alpine Linux
+- Update Alpine Linux installer and configuration files, tested on
+  Alpine v3.19, some assembly still required
+
+### Fixes
+- Fix confusing warning message when tmpfiles.d fails to install symlink
+- Fix tmpfiles.d legacy `/run/lock/subsys`, ordering
+- Add missing `/var/tmp` and `/var/lock -> /run/lock` (tmpfiles.d)
+- Fix #388: log redirection broken unless Finit runs in debug mode.
+  Found and fixed by Ryan Rorison
+- Fix #389: must libc requires `libgen.h` for `basename()` function.
+  Reported and worked around with new `basenm()` function by Stargirl
+- Fix #392: `service/foo/ready` condition reasserted on pidfile removal
+
+
+[4.6][] - 2023-11-13
+--------------------
+
+### Changes
+- Add support for service `notify:pid` and `readiness none` global
+  option to change how Finit expects readiness notification, issue #386
+
+### Fixes
+- Fix #383: dbus and runparts regression in Finit v4.5.  The configure
+  script must expand `FINIT_RUNPATH_` before defining it in `config.h`
+- Fix #384: service environment variables drop everything but the first
+  argument, e.g., `VAR="foo bar qux"` drops everything but `foo`
+- Fix #385: internal conditions, e.g., `<int/bootstrap>` turn into flux
+  when leaving bootstrap, causing depending services to stop
+- Fix #387: global environment variables declared with `set VAR=NAME` do
+  not drop leading `set `, causing `'set VAR'='NAME'` in env.
+- Sanity check environment variables, for services and globally.  Ensure
+  the variable name (key) does not contain spaces, or a leading `set `
+
+
+[4.5][] - 2023-10-30
 --------------------

 ### Changes
@@ -22,7 +188,7 @@ All relevant changes are documented in this file.
 - Improved logging on failure to `execvp()` a run/task/service, now
  with `errno`, e.g., "No such file or directory" when the command
  is missing from `$PATH`
- Add support for Bash completion to `initctl`, issue #360
+- Add Bash completion support for `initctl`, configurable, issue #360
 - Handle absolute path to `initctl [enable|disable]`, not supported
 - Update `finit.conf(5)` man page with the recommended directory
  hierarchy in `/etc/finit.d/`
@@ -37,6 +203,24 @@ All relevant changes are documented in this file.
  a task only `if:<run/foo/failure>` (here the run task 'foo' failed)
 - Document new `if:`, `conflict:`, `nowarn` options for run/task/service
  first introduced in v4.4
+- Failure to open fstab should log to console, not just log to `/dev/kmsg`
+- Rename `/lib/finit/system/*.conf`, added numbered prefix to ensure
+  proper execution order, e.g., `udevd` should always run first
+- Plugins and bundled services: dbus, keventd, watchdogd, and runparts,
+  are now loaded *after* all services in `/lib/finit/system/`.  A new
+  runtime-only path (for inspection) in `/run/finit/system/` is used
+- Redirect `log*` output to console when `finit.debug` is enabled
+- Assert `<int/container>` condition if we detect running in container
+- Add support for mdev's netlink daemon mode, issue #367
+- Add support for mdevd in `10-hotplug.conf`, preferred over plain mdev
+- Disable modprobe plugin by default, udevd and mdev/mdevd loads modules
+- Update documentation for run/task shell limitations, issue #376
+- Update documentation regarding automount of `/run` and `/tmp`
+- Update plugin documentation, add section about limited tmpfiles.d(5) support
+- Skip registering service when `if:!name` matches a known service.
+  This allows conditional loading of alternative services, e.g. if udevd
+  is already loaded we do not need mdevd
+- Drop `doc/bootstrap.md`, inaccurate and confusing to users

 ### Fixes
 - Fix #227: believed to have been fixed in v4.3, the root cause was
@@ -52,9 +236,41 @@ All relevant changes are documented in this file.
 - Fix #366: document `fsck.*` kernel command line options and simplify
  the configure flags `--enable-fsckfix` and `--enable-fastboot` to
  only adjust the default values for the `fsck.*` options.
+- Fix #371: swap load order of `/lib/finit/system/*` vs `/etc/finit.d/*`
+  We must run `10-hotplug.conf` first to ensure devices and modules are
+  up and loaded before the user's run/task/services are called.  The order
+  at bootstrap is now saved in `/run/finit/conf.order` for inspection,
+  `/run/finit/exec.order` shows the start order of each process
+- Fix #372: lost `udevadm` calls due to overloading
+- Adjust final `udevadm settle` timeout: 5 -> 30 sec
+- Fixed dbus plugin, the function that located `<pidfile> ...` in the
+  `dbus/system.conf` caused spurious line breaks which led to the
+  service not being loaded properly
 - The `runparts` executor now skips backup files (`foo~`)
 - The `runparts` stanza now properly appends ` start` to scripts that
  start with `S[0-9]+`.  This has been broken for a very long time.
+- Fix #377: expand service `env:file` variables, allow constructs like:
+
+        RUNDIR=/var/run/somesvc
+        DAEMON_ARGS=--workdir $RUNDIR --other-args...
+- Fix #378: warn on console if run/task times out during bootstrap
+- Fix #378: add run/task support for `<!>` to allow transition from
+  bootstrap to multi-user runlevel even though task has not run yet.
+- Fix #382: do not clear `<service/foo/STATE>` conditions on reload.  
+  Introduced back in v4.3-rc2, 82cc10be8, the support for automatic
+  service conditions have had a weird and unintended behavior.  Any
+  change in state (see `doc/svc-machine.png`) caused Finit to clear
+  out *all* previously acquired service conditions.
+
+  However, when moving between RUNNING and PAUSED states, a service
+  should not have its conditions cleared.  The PAUSED state, seen
+  also by all conditions moving to FLUX, is only temporary while an
+  `initctl reload` is processed.  If a service has no changes to be
+  applied it will move back to RUNNING.
+
+  Also, we cannot clear the service conditions because other run/task
+  or services may depend on it and clearing them would cause Finit to
+  `SIGTERM` these processes (since they are no longer eligible to run).


 [4.4][] - 2023-05-15
@@ -149,7 +365,7 @@ All relevant changes are documented in this file.
  `/etc/finit.conf`.

  For the complete experience a new top-level configuration file directive
-  `rcsd PATH` has aslo been added.  It in turn can be used by `factory.conf`
+  `rcsd PATH` has also been added.  It in turn can be used by `factory.conf`
  as follows to override `/etc/finit.d`:

        rcsd /etc/factory.d
@@ -732,7 +948,7 @@ make sure to read the whole change log when upgrading.
  previously hard-coded in Finit, e.g., starting the bundled watchdogd,
  various distro packed udevd and other hotplugging tools
 * A proper rescue mode has been added.  It is started extremely early
-  and is protected with a bundled `suslogin`.  Exiting rescue mode now
+  and is protected with a bundled `sulogin`.  Exiting rescue mode now
  brings up the system as a normal boot, as one expects
 * Support for `sysv` start/stop scripts as well as monitoring forking
  services, stared using `sysv` or `service` stanza
@@ -1563,40 +1779,46 @@ Major bug fix release.

 * Initial release

-[UNRELEASED]: https://github.com/troglobit/finit/compare/4.5...HEAD
-[4.5]: https://github.com/troglobit/finit/compare/4.4...4.5
-[4.4]: https://github.com/troglobit/finit/compare/4.3...4.4
-[4.3]: https://github.com/troglobit/finit/compare/4.2...4.3
-[4.2]: https://github.com/troglobit/finit/compare/4.1...4.2
-[4.1]: https://github.com/troglobit/finit/compare/4.0...4.1
-[4.0]: https://github.com/troglobit/finit/compare/3.1...4.0
-[3.1]: https://github.com/troglobit/finit/compare/3.0...3.1
-[3.0]: https://github.com/troglobit/finit/compare/2.4...3.0
-[2.4]: https://github.com/troglobit/finit/compare/2.3...2.4
-[2.3]: https://github.com/troglobit/finit/compare/2.2...2.3
-[2.2]: https://github.com/troglobit/finit/compare/2.1...2.2
-[2.1]: https://github.com/troglobit/finit/compare/2.0...2.1
-[2.0]: https://github.com/troglobit/finit/compare/1.12...2.0
+[UNRELEASED]: https://github.com/troglobit/finit/compare/4.11...HEAD
+[4.11]: https://github.com/troglobit/finit/compare/4.10...4.11
+[4.10]: https://github.com/troglobit/finit/compare/4.9...4.10
+[4.9]:  https://github.com/troglobit/finit/compare/4.8...4.9
+[4.8]:  https://github.com/troglobit/finit/compare/4.7...4.8
+[4.7]:  https://github.com/troglobit/finit/compare/4.6...4.7
+[4.6]:  https://github.com/troglobit/finit/compare/4.5...4.6
+[4.5]:  https://github.com/troglobit/finit/compare/4.4...4.5
+[4.4]:  https://github.com/troglobit/finit/compare/4.3...4.4
+[4.3]:  https://github.com/troglobit/finit/compare/4.2...4.3
+[4.2]:  https://github.com/troglobit/finit/compare/4.1...4.2
+[4.1]:  https://github.com/troglobit/finit/compare/4.0...4.1
+[4.0]:  https://github.com/troglobit/finit/compare/3.1...4.0
+[3.1]:  https://github.com/troglobit/finit/compare/3.0...3.1
+[3.0]:  https://github.com/troglobit/finit/compare/2.4...3.0
+[2.4]:  https://github.com/troglobit/finit/compare/2.3...2.4
+[2.3]:  https://github.com/troglobit/finit/compare/2.2...2.3
+[2.2]:  https://github.com/troglobit/finit/compare/2.1...2.2
+[2.1]:  https://github.com/troglobit/finit/compare/2.0...2.1
+[2.0]:  https://github.com/troglobit/finit/compare/1.12...2.0
 [1.12]: https://github.com/troglobit/finit/compare/1.11...1.12
 [1.11]: https://github.com/troglobit/finit/compare/1.10...1.11
 [1.10]: https://github.com/troglobit/finit/compare/1.9...1.10
-[1.9]: https://github.com/troglobit/finit/compare/1.8...1.9
-[1.8]: https://github.com/troglobit/finit/compare/1.7...1.8
-[1.7]: https://github.com/troglobit/finit/compare/1.6...1.7
-[1.6]: https://github.com/troglobit/finit/compare/1.5...1.6
-[1.5]: https://github.com/troglobit/finit/compare/1.4...1.5
-[1.4]: https://github.com/troglobit/finit/compare/1.3...1.4
-[1.3]: https://github.com/troglobit/finit/compare/1.2...1.3
-[1.2]: https://github.com/troglobit/finit/compare/1.1...1.2
-[1.1]: https://github.com/troglobit/finit/compare/1.0...1.1
-[1.0]: https://github.com/troglobit/finit/compare/0.9...1.0
-[0.9]: https://github.com/troglobit/finit/compare/0.8...0.9
-[0.8]: https://github.com/troglobit/finit/compare/0.7...0.8
-[0.7]: https://github.com/troglobit/finit/compare/0.6...0.7
-[0.6]: https://github.com/troglobit/finit/compare/0.5...0.6
-[0.5]: https://github.com/troglobit/finit/compare/0.4...0.5
-[0.4]: https://github.com/troglobit/finit/compare/0.3...0.4
-[0.3]: https://github.com/troglobit/finit/compare/0.2...0.3
-[0.2]: https://github.com/troglobit/finit/compare/0.1...0.2
+[1.9]:  https://github.com/troglobit/finit/compare/1.8...1.9
+[1.8]:  https://github.com/troglobit/finit/compare/1.7...1.8
+[1.7]:  https://github.com/troglobit/finit/compare/1.6...1.7
+[1.6]:  https://github.com/troglobit/finit/compare/1.5...1.6
+[1.5]:  https://github.com/troglobit/finit/compare/1.4...1.5
+[1.4]:  https://github.com/troglobit/finit/compare/1.3...1.4
+[1.3]:  https://github.com/troglobit/finit/compare/1.2...1.3
+[1.2]:  https://github.com/troglobit/finit/compare/1.1...1.2
+[1.1]:  https://github.com/troglobit/finit/compare/1.0...1.1
+[1.0]:  https://github.com/troglobit/finit/compare/0.9...1.0
+[0.9]:  https://github.com/troglobit/finit/compare/0.8...0.9
+[0.8]:  https://github.com/troglobit/finit/compare/0.7...0.8
+[0.7]:  https://github.com/troglobit/finit/compare/0.6...0.7
+[0.6]:  https://github.com/troglobit/finit/compare/0.5...0.6
+[0.5]:  https://github.com/troglobit/finit/compare/0.4...0.5
+[0.4]:  https://github.com/troglobit/finit/compare/0.3...0.4
+[0.3]:  https://github.com/troglobit/finit/compare/0.2...0.3
+[0.2]:  https://github.com/troglobit/finit/compare/0.1...0.2
 [libuEv]: https://github.com/troglobit/libuev
 [dea3ae8]: https://github.com/troglobit/finit/commit/dea3ae8
@@ -1,5 +1,5 @@
 Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
-Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>

 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
@@ -10,6 +10,10 @@ if DOC
 SUBDIRS           += doc
 endif

+if BASH
+bashdir            = $(BASH_DIR)
+dist_bash_DATA     = initctl
+endif
 # Compat hook
 install-dev:
 	@make -C src install-pkgincludeHEADERS
@@ -30,6 +34,7 @@ release: distcheck
 		printf "$$file.sha256\t"; cat ../$$file.sha256 | cut -f1 -d' ';	\
 	done

-DISTCHECK_CONFIGURE_FLAGS = --prefix=/usr --sysconfdir=/etc --localstatedir=/var \
-			    --enable-testserv-plugin --enable-x11-common-plugin  \
-			    --with-watchdog --with-keventd --with-fstab=/etc/fstab
+DISTCHECK_CONFIGURE_FLAGS = --prefix=/usr --sysconfdir=/etc --localstatedir=/var   \
+			    --enable-testserv-plugin --enable-x11-common-plugin    \
+			    --with-watchdog --with-keventd --with-fstab=/etc/fstab \
+			    --with-bash-completion-dir=no
@@ -3,7 +3,6 @@

 * [Introduction](#introduction)
 * [Features](#features)
-* [Bootstrap](doc/bootstrap.md#bootstrap)
 * [Runlevels](#runlevels)
 * [Syntax](doc/config.md#syntax)
  * [Runparts & /etc/rc.local](#runparts--etcrclocal)
@@ -23,11 +22,10 @@ Introduction
 ------------

 Fast init for Linux systems.  Reverse engineered from the [EeePC
-fastinit][] over ten years ago by [Claudio Matsuoka][] — "gaps filled
-with frog DNA …"
+fastinit][] by [Claudio Matsuoka][] — "gaps filled with frog DNA …"

-![Alpine screenshot](img/finit4-screenshot.png)  
-*Figure 1: Screenshot showing Finit booting [Alpine Linux](https://www.alpinelinux.org/).*
+![Alpine screenshot](img/alpine-screenshot2.png)  
+*Figure 1: Screenshot of Finit booting [Alpine Linux (HowTo)](https://github.com/troglobit/finit/tree/master/contrib/alpine).*

 Features include:

@@ -63,10 +61,13 @@ distributions:
  * [Alpine Linux](contrib/alpine/), and
  * [Debian GNU/Linux](contrib/debian/), also works on Ubuntu/Linux Mint

-> **Note:** support for various Linux distributions does not mean Finit
-> installs easily on all architectures.  The bundled install scripts are
-> examples for standard installations, tested on amd64 (x86_64) systems.
-> Custom setups, for embedded systems, can be found in [myLinux][].
+> [!NOTE]
+> Support for various Linux distributions does not mean Finit installs
+> easily on all architectures.  The bundled install scripts are examples
+> for standard installations, tested on amd64 (x86_64) systems.  Custom
+> setups, e.g., for embedded systems, can be found in the following
+> [Buildroot][] based examples: [myLinux][], [Infix][], or the plain
+> [br2-finit-demo](https://github.com/troglobit/br2-finit-demo).


 Example
@@ -78,9 +79,10 @@ be placed in `/etc/finit.d/available` and enabled by an operator using
 the [initctl](#commands--status) tool.  See the above mentioned Linux
 distributions, or [myLinux][].

-> **Note:** as of Finit v4.4, .conf lines can be broken up using the
-> standard UNIX continuation character (`\`), also trailing comments are
-> now supported.  The latter means you need to escape any hashes used in
+> [!TIP]
+> As of Finit v4.4, `.conf` lines can be broken up using the standard
+> UNIX continuation character (`\`), trailing comments are now also
+> supported.  The latter means you need to escape any hashes used in
 > directives and descriptions (`\#`).  For more on this and examples,
 > see the [finit.conf(5)][] manual or [doc/config.md](doc/config.md).

@@ -285,6 +287,7 @@ run  [S]                /path/to/ident    --
 task [2] <hw/model/foo> /path/to/foo-init -- Initializing Foo board
 ```

+> [!TIP]
 > Notice the trick with an empty description to hide the call to `ident`
 > in the Finit progress output.

@@ -367,9 +370,10 @@ The `initctl` tool has three commands to help debug and optimize the
 setup and monitoring of cgroups.  See the `ps`, `top`, and `cgroup`
 commands for details.

-> **Note:** systems that do not support cgroups, specifically version 2,
-> are automatically detected.  On such systems the above functionality
-> is disabled early at boot.
+> [!NOTE]
+> Systems that do not support cgroups, specifically version 2, are
+> automatically detected.  On such systems the above functionality is
+> disabled early at boot.


 Runparts & /etc/rc.local
@@ -391,8 +395,7 @@ Right after the runlevel change when all services have started properly,
 No configuration stanza in `/etc/finit.conf` is required for `rc.local`.
 If it exists and is an executable shell script Finit calls it at the very
 end of the boot, before calling the `HOOK_SYSTEM_UP`.  See more on hooks
-in [doc/plugins.md](doc/plugins.md#hooks), and about the system bootstrap
-in [doc/bootstrap.md](doc/bootstrap.md).
+in [doc/plugins.md](doc/plugins.md#hooks).


 ### Limitations
@@ -406,8 +409,7 @@ The event loop is the whole thing which Finit is built around, except
 for runlevel S, which remains a slow procession through a lot of set up,
 with a few hooks and blocking call outs to external scripts.

-However, not all `initctl` commands are prohibited, supported commands:
-are:
+However, not all `initctl` commands are prohibited. Supported commands:

 - `inictl cond`: only operate of files in `/run/finit/cond`
 - `initctl enable/disable`: enabled run/task/service is activated on
@@ -575,9 +577,10 @@ file must be used to tell Finit to stop and start it on `reload` and
 `runlevel` changes.  If `<>` holds more [conditions](doc/conditions.md),
 these will also affect how a service is maintained.

-> **Note:** even though it is possible to start services not belonging in
-> the current runlevel these services will not be respawned automatically
-> by Finit if they exit (crash).  Hence, if the runlevel is 2, the below
+> [!NOTE]
+> Even though it is possible to start services not belonging in the
+> current runlevel these services will not be respawned automatically by
+> Finit if they exit (crash).  Hence, if the runlevel is 2, the below
 > Dropbear SSH service will not be restarted if it is killed or exits.

 The `status` command is the default, it displays a quick overview of all
@@ -707,6 +710,8 @@ and proposed extensions.
 [EeePC fastinit]:   https://web.archive.org/web/20071208212450/http://wiki.eeeuser.com/boot_process:the_boot_process
 [Claudio Matsuoka]: https://github.com/cmatsuoka
 [Joachim Wiberg]:   https://troglobit.com
+[Buildroot]:        https://buildroot.org
+[Infix]:            https://kernelkit.github.io
 [finit.conf(5)]:    https://man.troglobit.com/man5/finit.conf.5.html
 [License]:          https://en.wikipedia.org/wiki/MIT_License
 [License Badge]:    https://img.shields.io/badge/License-MIT-teal.svg
@@ -1,4 +1,4 @@
-AC_INIT([Finit], [4.5-rc4], [https://github.com/troglobit/finit/issues],
+AC_INIT([Finit], [4.11], [https://github.com/troglobit/finit/issues],
 	[finit], [https://troglobit.com/projects/finit/])
 AC_CONFIG_AUX_DIR(aux)
 AM_INIT_AUTOMAKE([1.11 foreign dist-xz subdir-objects])
@@ -15,10 +15,10 @@ AC_CONFIG_FILES([Makefile
 	man/Makefile
 	plugins/Makefile
 	src/Makefile
-	system/Makefile
-	tmpfiles.d/Makefile
+	system/Makefile system/10-hotplug.conf
 	test/test.env test/Makefile
-	test/lib/Makefile test/src/Makefile])
+	test/lib/Makefile test/src/Makefile
+	tmpfiles.d/Makefile])

 # Older versions of autoconf (<2.58) do not have AC_CONFIG_MACRO_DIR()
 #m4_include([m4/plugin.m4])
@@ -67,10 +67,18 @@ AC_ARG_ENABLE(fsckfix,
        AS_HELP_STRING([--enable-fsckfix], [Run fsck fix mode (options: -yf) on filesystems listed in /etc/fstab]),,[
 	enable_fsckfix=no])

+AC_ARG_ENABLE(cgroup,
+        AS_HELP_STRING([--disable-cgroup], [Disable cgroup v2 support, default: autodetect from /sys/fs/cgroup]),,[
+        enable_cgroup=yes])
+
 AC_ARG_ENABLE(redirect,
        AS_HELP_STRING([--disable-redirect], [Disable redirection of service output to /dev/null]),,[
 	enable_redirect=yes])

+AC_ARG_ENABLE(kernel_logging,
+        AS_HELP_STRING([--disable-kernel-logging], [Disable kernel logging to console (use 'quiet' instead!]),,[
+	enable_kernel_logging=yes])
+
 AC_ARG_ENABLE(logrotate,
        AS_HELP_STRING([--disable-logrotate], [Disable built-in rotation of /var/log/wtmp]),,[
 	enable_logrotate=yes])
@@ -94,18 +102,22 @@ AC_ARG_ENABLE(all_plugins,
 AC_PLUGIN([alsa-utils],    [no],  [Save and restore ALSA sound settings using alsactl])
 AC_PLUGIN([dbus],          [no],  [Setup and start system message bus, D-Bus])
 AC_PLUGIN([modules-load],  [no],  [Scans /etc/modules-load.d for modules to load])
-AC_PLUGIN([modprobe],      [yes], [Coldplug modules using modalias magic])
+AC_PLUGIN([modprobe],      [no],  [Coldplug modules using modalias magic])
 AC_PLUGIN([resolvconf],    [no],  [Setup necessary files for resolvconf])
 AC_PLUGIN([x11-common],    [no],  [Console setup (for X)])
 AC_PLUGIN([netlink],       [yes], [Basic netlink plugin for IFUP/IFDN and GW events. Can be replaced with externally built plugin that links with libnl or similar.])
 AC_PLUGIN([hook-scripts],  [no],  [Trigger script execution from hook points])
-AC_PLUGIN([hotplug],       [yes], [Setup and start udev or mdev hotplug daemon])
+AC_PLUGIN([hotplug],       [yes], [Start udevd or mdev kernel event datamon])
 AC_PLUGIN([rtc],           [yes], [Save and restore RTC using hwclock])
 AC_PLUGIN([tty],           [yes], [Automatically activate new TTYs, e.g. USB-to-serial])
 AC_PLUGIN([urandom],       [yes], [Setup and save random seed at boot/shutdown])
 AC_PLUGIN([testserv],      [no],  [Test plugin to start test serv daemon])

 # Check for extra arguments or packages
+AC_ARG_WITH([bash-completion-dir],
+	AS_HELP_STRING([--with-bash-completion-dir[=PATH]], [Directory to install Bash completion, default: auto]),
+	[bash_dir=$withval], [bash_dir=yes])
+
 AC_ARG_WITH(fstab,
        AS_HELP_STRING([--with-fstab=FILE], [System default fstab, default $sysconfdir/fstab]),
 	[fstab=$withval], [fstab=yes])
@@ -165,9 +177,13 @@ AC_ARG_WITH(plugin-path,
 	[plugin_path=$withval], [plugin_path=yes])

 AC_ARG_WITH(rtc-date,
-	AS_HELP_STRING([--with-rtc-date=DATE], [If RTC date/time is too old, restore to DATE, format "YYYY-MM-DD HH:MM", default "2000-01-01 00:00"]),
+	AS_HELP_STRING([--with-rtc-date=DATE], [If RTC date/time is too old, restore to DATE, format "YYYY-MM-DD HH:MM:SS", default "2000-01-01 00:00:00"]),
 	[rtc_date=$withval], [rtc_date=no])

+AC_ARG_WITH(rtc-file,
+        AS_HELP_STRING([--with-rtc-file=FILE], [If RTC is missing, save and restore system clock from this file, default: no]),
+	[rtc_file=$withval], [rtc_file=no])
+
 ### Enable features ###########################################################################

 # Create config.h from selected features and fallback defaults
@@ -177,6 +193,12 @@ AS_IF([test "x$enable_auto_reload" = "xyes"], [
 AS_IF([test "x$enable_kernel_cmdline" = "xyes"], [
        AC_DEFINE(KERNEL_CMDLINE, 1, [Dumpster diving after init args from /proc/cmdline])])

+AS_IF([test "x$enable_kernel_logging" = "xyes"], [
+        AC_DEFINE(KERNEL_LOGGING, 1, [Keep kernel warn/err logs to console])])
+
+AS_IF([test "x$enable_cgroup" = "xyes"], [
+        AC_DEFINE(CGROUP2_ENABLED, 1, [Autodetect cgroup v2 support from /sys/fs/cgroup])])
+
 AS_IF([test "x$enable_fastboot" = "xyes"], [
 	AC_DEFINE(FAST_BOOT, 1, [Skip fsck check on filesystems listed in /etc/fstab])])

@@ -196,6 +218,12 @@ AS_IF([test "x$enable_rescue" != "xno"], [
 AM_CONDITIONAL(LOGROTATE, [test "x$enable_logrotate" = "xyes"])

 ### With features ##############################################################################
+AS_IF([test "x$bash_dir" = "xyes"], [
+	PKG_CHECK_MODULES([BASH_COMPLETION], [bash-completion >= 2.0],
+		[BASH_DIR="$(pkg-config --variable=completionsdir bash-completion)"],
+		[BASH_DIR="$datadir/bash-completion/completions"])], [
+	BASH_DIR="$bash_dir"])
+
 AS_IF([test "x$with_fstab" != "xno"], [
 	AS_IF([test "x$fstab" = "xyes"], [fstab=$sysconfdir/fstab])
 	AC_EXPAND_DIR(fstab_path, "$fstab")
@@ -217,10 +245,9 @@ AC_DEFINE_UNQUOTED(FINIT_RCSD, "$rcsd_path", [Finit rcS.d/, default /etc/finit.d
 AC_SUBST(FINIT_RCSD, "$rcsd_path")

 AS_IF([test "x$with_rc_local" != "xno"], [
-	AS_IF([test "x$rclocal" = "xyes"], [
-		rclocal=$sysconfdir/rc.local])])
-AC_EXPAND_DIR(rclocal_path, "$rclocal")
-AC_DEFINE_UNQUOTED(FINIT_RC_LOCAL, "$rclocal_path", [Compat SysV /etc/rc.local file to run last at boot.])
+	AS_IF([test "x$rclocal" = "xyes"], [rclocal=$sysconfdir/rc.local])
+	AC_EXPAND_DIR(rclocal_path, "$rclocal")
+	AC_DEFINE_UNQUOTED(FINIT_RC_LOCAL, "$rclocal_path", [Compat SysV /etc/rc.local file to run last at boot.])])

 AS_IF([test "x$with_sysconfig" != "xno"], [
 	AS_IF([test "x$sysconfig" != "xdefault"], [
@@ -255,9 +282,16 @@ AS_IF([test "x$with_random_seed" != "xno"], [
 	AC_DEFINE_UNQUOTED(RANDOMSEED, "$random_path", [Improve random at boot by seeding it with sth from before.])])

 AS_IF([test "x$rtc_date" != "xno"], [
-	AC_DEFINE(RTC_TIMESTAMP_CUSTOM, "$rtc_date", [Custom RTC restore date, default: 2000-01-01 00:00])], [
+	AC_DEFINE_UNQUOTED(RTC_TIMESTAMP_CUSTOM, "$rtc_date", [Custom RTC restore date, default: 2000-01-01 00:00])], [
 	rtc_date=""])

+AS_IF([test "x$rtc_file" != "xno"], [
+	AS_IF([test "x$rtc_file" = "xyes"], [
+		rtc_file=/var/lib/misc/rtc])
+	AC_EXPAND_DIR(rtcfile_path, "$rtc_file")
+	AC_DEFINE_UNQUOTED(RTC_FILE, "$rtcfile_path", [Save and restore system time from this file if /dev/rtc is missing.])],[
+	AC_DEFINE_UNQUOTED(RTC_FILE, NULL)])
+
 AS_IF([test "x$with_keventd" != "xno"], [with_keventd=yes])

 AS_IF([test "x$with_sulogin" != "xno"], [
@@ -285,19 +319,27 @@ AS_IF([test "x$with_plugin_path" != "xno"], [
 	AC_DEFINE_UNQUOTED(EXTERNAL_PLUGIN_PATH, "$plugin_path", [Built-in default: /usr/lib/finit/plugins:/usr/local/lib/finit/plugins])])

 # Control build with automake flags
-AM_CONDITIONAL(STATIC,    [test "x$enable_static" = "xyes"])
+AM_CONDITIONAL(BASH,      [test "x$bash_dir"      != "xno"])
+AM_CONDITIONAL(STATIC,    [test "x$enable_static"  = "xyes"])
 AM_CONDITIONAL(KEVENTD,   [test "x$with_keventd"  != "xno"])
 AM_CONDITIONAL(SULOGIN,   [test "x$with_sulogin"  != "xno"])
 AM_CONDITIONAL(WATCHDOGD, [test "x$with_watchdog" != "xno"])
-AM_CONDITIONAL(DOC,       [test "x$enable_doc" = "xyes"])
+AM_CONDITIONAL(DOC,       [test "x$enable_doc"     = "xyes"])
 AM_CONDITIONAL(CONTRIB,   [test "x$enable_contrib" = "xyes"])
 AM_CONDITIONAL(TESTSERV,  [test "x$enable_testserv_plugin" = "xyes"])

+# Workaround for as-of-yet unreleased runstatedir support, planned for
+# autoconf 2.70, which some major distros have backported.
+AS_IF([test -z "$runstatedir"], runstatedir="$localstatedir/run")
+AC_SUBST(runstatedir)
+
 # Override default libdir, used for plugins and rescue.conf
 pkglibdir=$libdir/finit
 AC_SUBST(pkglibexecdir)
 AC_EXPAND_DIR(pkglibexecdir, "$libexecdir/finit")
 AC_DEFINE_UNQUOTED(FINIT_EXECPATH_, "$pkglibexecdir", [Finit libexec path])
+AC_EXPAND_DIR(finit_runpath, "$runstatedir/finit/system")
+AC_DEFINE_UNQUOTED(FINIT_RUNPATH_, "$finit_runpath", [Finit runtime dynamic system services])

 AC_EXPAND_DIR(plugin_path, "$pkglibdir/plugins")
 AC_SUBST(plugin_path)
@@ -305,7 +347,7 @@ AC_DEFINE_UNQUOTED(PLUGIN_PATH, "$plugin_path", [Finit plugin path])

 AC_EXPAND_DIR(tmpfiles_path, "$libdir/tmpfiles.d")
 AC_SUBST(tmpfiles_path)
-AC_DEFINE_UNQUOTED(TMPFILES_PATH, "$tmpfiles_path", [Main tmpfiles.d/, override in /etc])
+AC_DEFINE_UNQUOTED(TMPFILES_PATH_, "$tmpfiles_path", [Main tmpfiles.d/, override in /etc])

 AC_EXPAND_DIR(finit_tmpfiles, "$pkglibdir/tmpfiles.d")
 AC_SUBST(finit_tmpfiles)
@@ -313,13 +355,16 @@ AC_DEFINE_UNQUOTED(FINIT_TMPFILES, "$finit_tmpfiles", [Finit tmpfiles.d/ .conf p

 AC_EXPAND_DIR(system_path, "$pkglibdir/system")
 AC_SUBST(system_path)
-AC_DEFINE_UNQUOTED(FINIT_SYSPATH, "$system_path", [Static services, previously generated at runtime by plugins])
+AC_DEFINE_UNQUOTED(FINIT_SYSPATH_, "$system_path", [Static services, previously generated at runtime by plugins])

 AC_EXPAND_DIR(rescue_conf, "$pkglibdir/rescue.conf")
 AC_DEFINE_UNQUOTED(RESCUE_CONF, "$rescue_conf", [Finit rescue mode .conf])
 AC_EXPAND_DIR(sample_conf, "$pkglibdir/sample.conf")
 AC_DEFINE_UNQUOTED(SAMPLE_CONF, "$sample_conf", [Finit sameple.conf for initctl create])

+AC_EXPAND_DIR(bash_completion_dir, "$BASH_DIR")
+AC_SUBST(BASH_DIR, "$bash_completion_dir")
+
 AS_IF([test "$heading" = ""],   [heading="<DEFAULT>"])
 AS_IF([test "$heading" = "no"], [heading="<NONE>"])

@@ -334,15 +379,16 @@ cat <<EOF

 ------------------ Summary ------------------
 $PACKAGE_NAME version $PACKAGE_VERSION
-  Prefix................: $prefix
-  Exec prefix...........: $eprefix
+  Prefix................: $(eval echo $prefix)
+  Exec prefix...........: $(eval echo $exec_prefix)
+  Libdir................: $(eval echo $libdir)
  Sysconfdir............: `eval echo $sysconfdir`
  Localstatedir.........: `eval echo $localstatedir`
  Default fstab.........: `eval echo $fstab`
  Finit config file.....: $conf_path
  Finit config.d path...: $rcsd_path
  Finit plugin path.....: $plugin_path
-  Compat rc.local path..: $rclocal_path
+  Compat rc.local path..: `eval echo $rclocal`
  System environment....: ${sysconfig_path:-${sysconfig}}
  Random seed path......: $random_path
  C Compiler............: $CC $CFLAGS $CPPFLAGS $LDFLAGS $LIBS
@@ -352,14 +398,19 @@ Behavior:
  Boot heading..........: $heading
  Plugins...............: $plugins
  RTC restore date......: $RTC_DATE
+  RTC fallback file.....: $rtc_file

 Optional features:
  Install doc/..........: $enable_doc
  Install contrib/......: $enable_contrib
+  Bash completion.......: $bash_completion_dir
  Built-in keventd......: $with_keventd
  Built-in sulogin......: $with_sulogin $sulogin
  Built-in watchdogd....: $with_watchdog $watchdog
  Built-in logrotate....: $enable_logrotate
+  Use cgroup v2.........: $enable_cgroup
+  Parse kernel cmdline..: $enable_kernel_cmdline
+  Keep kernel logging...: $enable_kernel_logging
  Skip fsck check.......: $enable_fastboot
  Run fsck fix mode.....: $enable_fsckfix
  Redirect output.......: $enable_redirect
@@ -1,5 +1,8 @@
-HowTo: Finit on Alpine Linux 3.4-3.6
-====================================
+HowTo: Finit on Alpine Linux 3.4...3.19
+=======================================
+
+> [!TIP]
+> https://troglobit.com/post/2021-02-12-alpine-linux-with-finit/

 HowTo use Finit to boot an [Alpine Linux][] system.  It is assumed that
 the user has already installed make, a compiler, C library header files,
@@ -1,8 +1,7 @@
 SUBDIRS    = available
 docsdir   := @docdir@/contrib/alpine/finit.d
 d_LINKS    = acpid.conf crond.conf dropbear.conf getty.conf	\
-	     keymap.conf modules.conf ntpd.conf			\
-	     klogd.conf syslogd.conf
+	     keymap.conf modules.conf ntpd.conf syslogd.conf

 install-exec-hook:
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/available
@@ -1,4 +1,4 @@
 docsdir   := @docdir@/contrib/alpine/finit.d/available
 docs_DATA  = acpid.conf crond.conf dropbear.conf getty.conf keymap.conf	\
-             lxdm.conf modules.conf ntpd.conf syslog.conf watchdog.conf
+             lxdm.conf modules.conf ntpd.conf syslogd.conf watchdog.conf
 EXTRA_DIST = $(docs_DATA)
@@ -4,4 +4,4 @@
 #module evdev
 #module mousedev
 #module 8139cp
-module softdog
+#module softdog
@@ -1,45 +1,53 @@
 #!/bin/sh

-if [ "x`id -u`" != "x0" ]; then
-    echo
-    echo "*** This script must run as root"
-    echo
+if [ "$(id -u)" != "0" ]; then
+    printf "\n\e[1m*** This script must run as root\e[0m\n\n"
    exit 1
 fi

+# shellcheck disable=SC3037,SC3045,SC2154
+yorn()
+{
+    printf "\e[1m> %s (y/N)?\e[0m " "$*"
+    read -rn1 yorn
+    echo
+
+    if [ "$yorn" = "y" ] || [ "$yorn" = "Y" ]; then
+	return 0
+    fi
+
+    return 1
+}
+
 # Adjust base directory
-grep -q alpine Makefile 2>/dev/null
-if [ $? -eq 0 ]; then
+if grep -q contrib/alpine Makefile 2>/dev/null; then
    cd ../..
-elif [ ! -e configure.ac ]; then
-    echo "*** Please run this script from the Finit base directory."
+fi
+
+if [ ! -e configure.ac ]; then
+    printf "\n\e[1m*** Please run this script from the Finit base directory.\e[0m\n"
    exit 1
 fi

-echo
-echo "*** Install Finit on Alpine Linux"
-echo "========================================================================"
-echo "/sbin/finit           - PID 1"
-echo "/lib/finit/plugins/*  - All enabled Finit plugins"
-echo "/etc/finit.conf       - Finit configuration file"
-echo "/etc/finit.d/         - Finit services"
-echo
-read -p "Do you want to continue (y/N)? " yorn
+printf "\n\e[1mInstall Finit on Alpine Linux\n"
+printf "========================================================================\e[0m\n"
+printf "/sbin/finit           - PID 1\n"
+printf "/lib/finit/plugins/*  - All enabled Finit plugins\n"
+printf "/etc/finit.conf       - Finit configuration file\n"
+printf "/etc/finit.d/         - Finit services\n"

-if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
-    echo
-    echo "*** Installing Finit files ..."
+if yorn "Do you want to continue"; then
+    printf "\n\e[1m*** Installing Finit files ...\e[0m\n"
    make install
-    cd /usr/share/doc/finit/contrib/alpine
+    cd /usr/share/doc/finit/contrib/alpine || exit 1
    for file in finit.conf rc.local; do
 	install -vbD $file /etc/$file
    done
    cp -va finit.d /etc/

-    read -p "*** Install Finit as the system default Init (y/N)? " yorn
-    if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
-	echo "*** Updating /sbin/init symlink --> finit ..."
-	cd /sbin
+    if yorn "Install Finit as the system default Init"; then
+	printf "\e[1m*** Updating /sbin/init symlink --> finit ...\e[0m\n"
+	cd /sbin || exit 1
 	rm init
 	ln -s finit init

@@ -48,10 +56,8 @@ if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
 	ln -s reboot shutdown
 	ln -s reboot suspend
    fi
-    echo "*** Done"
+    printf "\n\e[1m*** Done\e[0m\n"
    echo
 else
-    echo
-    echo "*** Aborting install."
-    echo
+    printf "\n\e[1m*** Aborting install.\e[0m\n\n"
 fi
@@ -20,8 +20,9 @@ tools pre-systemd work as intended.

    root@debian:~# apt install initscripts console-setup

-> **Note:** as of Debian 11 (Bullseye), libuev and libite are part of
-> the main section of Debian.  So just install the -dev packages :)
+> [!TIP]
+> As of Debian 11 (Bullseye), libuev and libite are part of the main
+> section of Debian.  So just install the -dev packages :)

 The following script can then be used to configure, build, install and
 set up your system to run Finit:
@@ -47,7 +48,8 @@ comands to `initctl`, followed by `reload` to activate your changes.
 You can also use a standard [/etc/rc.local](rc.local) for one-shot tasks
 and initialization like keyboard language etc.

-> **NOTE:** X Window system, you may need to `sudo apt install elogind`
+> [!NOTE]
+> For the X Window system, you may need to `sudo apt install elogind`
 > (Bullseye and later), followed by `initctl reload` to activate it (it
 > is enabled by default), and logout/login again.  The elogind daemon
 > ensures a regular non-root user can start and interact with an X
@@ -1,59 +0,0 @@
-Bootstrap
-=========
-
-0. Get bearings, disable kernel logs, initialize TTY and print banner,
-   unless `HOOK_BANNER` is defined, then call that instead
-1. Prepare emergency shell, if enabled
-2. Set up initial signal handlers
-3. Set up default $PATH early
-4. Mount `/proc` and `/sys`
-5. Check kernel command line for `debug` to figure out log level
-6. Load all `.so` plugins
-7. Call `fsck` on file systems listed in `/etc/fstab`
-8. Populate `/dev` using either udev or mdev, depending on system type
-9. Parse `/etc/finit.conf`
-10. Start built-in watchdog, if enabled and `WDT_DEVNODE` exists.  This
-    means any WDT that requires a kernel module need to be either
-    compiled into the kernel, or insmod'ed in `/etc/finit.conf`
-11. Load all `/etc/finit.d/*.conf` files and set hostname
-12. Remount `/` read-write if `/` is listed in `/etc/fstab` without `ro`
-13. Call 1st level hooks, `HOOK_ROOTFS_UP`
-14. Mount all file systems listed in `/etc/fstab` and swap, if available.
-    On mount error `HOOK_MOUNT_ERROR` is called.  After mount, regardless
-    of error, `HOOK_MOUNT_POST` is called
-15. Enable SysV init signals
-16. Call 2nd level hooks, `HOOK_BASEFS_UP`
-17. Cleanup stale files from `/tmp/*` et al, handled by `bootmisc` plugin
-18. Load kernel params from `/etc/sysctl.d/*.conf`, `/etc/sysctl.conf`
-    et al. (Supports all locations that SysV init does.), handled by
-    `procps` plugin
-19. Start all 'S' runlevel tasks and services
-20. Bring up loopback interface and all `/etc/network/interfaces`, if
-    the `.conf` setting `network <SCRIPT>` is set, it is called instead
-21. Call 3rd level hooks, `HOOK_NETWORK_UP`
-22. If `runparts <DIR>` is set, [run-parts(8)][] is called on `<DIR>`
-23. Switch to the configured runlevel from `/etc/finit.conf`, default 2.
-    At every runlevel change all `*.conf` files in `/etc/finit.d/` are
-    (re)loaded and new services, tasks, and blocking run commands are
-    started.  Provided they are allowed in the new runlevel and all of
-    their conditions, if any, are set.
-24. Call 4th level hooks, `HOOK_SVC_UP`
-25. Call `/etc/rc.local`, if it exists and is an executable shell script
-26. Call 5th level (last) hooks, `HOOK_SYSTEM_UP`
-27. Start all configured TTYs
-
-In (19) and (23) tasks and services defined in `/etc/finit.conf` and
-`/etc/finit.d/*.conf` are started.
-
-Notice the seven hook points that are called at various point in the
-bootstrap process.  This is where plugins can extend the boot in any
-way they please.  There are other hook points available, for more on
-this, see [plugins.md](plugins.md).
-
-For instance, at `HOOK_BASEFS_UP` a plugin could read an XML file from a
-USB stick, convert/copy its contents to the system's `/etc/` directory,
-well before all 'S' runlevel tasks are started.  This could be used with
-system images that are created read-only and all configuration is stored
-on external media.
-
-[run-parts(8)]: http://manpages.debian.org/cgi-bin/man.cgi?query=run-parts
@@ -1,5 +1,5 @@
-Building
-========
+Building Finit
+==============

 * [Introduction](#introduction)
 * [Configure](#configure)
@@ -17,14 +17,15 @@ optional plugins to enable.  It depends on two external libraries:
 - [libuEv][], the event loop
 - [libite][] (-lite), much needed frog DNA

-**NOTE:** Most free/open source software that uses `configure` default
-  to install to `/usr/local`.  However, some Linux distributions do no
-  longer search that path for installed software, e.g. Fedora and Alpine
-  Linux.  To get finit's configure script to find its dependencies you
-  have to help the `pkg-config` tool a bit if you do not change the
-  default prefix path:
-
-    PKG_CONFIG_LIBDIR=/usr/local/lib/pkgconfig ./configure
+> [!IMPORTANT]
+> Most free/open source software packages that use `configure` default
+> to install to `/usr/local`.  However, some Linux distributions do no
+> longer search that path for installed software, e.g. Fedora and Alpine
+> Linux.  To get finit's configure script to find its dependencies you
+> have to help the `pkg-config` tool a bit if you do not change the
+> default prefix path:
+>
+>     PKG_CONFIG_LIBDIR=/usr/local/lib/pkgconfig ./configure

 The configure script checks for all dependencies, including the correct
 version of the above mentioned libraries.  Currently required versions:
@@ -71,12 +72,13 @@ Below are a few of the main switches to configure:

 For more configure flags, see <kbd>./configure --help</kbd>

-> **Note:** the configure script is not available in the GIT sources.  It is
->           however included in (officially supported) released tarballs.  The
->           idea is that you should not need GNU autotools to build, only the
->           above mentioned dependencies, a POSIX shell, a C compiler and make.
->           Any contributing to Finit can generate it from `configure.ac` using
->           the `autogen.sh` script.
+> [!NOTE]
+> The configure script is not available in the GIT sources.  It is
+> however included in (officially supported) released tarballs.  The
+> idea is that you should not need GNU autotools to build, only the
+> above mentioned dependencies, a POSIX shell, a C compiler and make.
+> Any contributing to Finit can generate it from `configure.ac` using
+> the `autogen.sh` script.


 Example
@@ -115,10 +117,11 @@ Linux config to:

    CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"

-**Note:** If you run into problems starting Finit, take a look at
-  `finit.c`.  One of the most common problems is a custom Linux kernel
-  build that lack `CONFIG_DEVTMPFS`.  Another is too much cruft in the
-  system `/etc/fstab`.
+> [!TIP]
+> If you run into problems starting Finit, take a look at `finit.c`.
+> One of the most common problems is a custom Linux kernel build that
+> lack `CONFIG_DEVTMPFS`.  Another is too much cruft in the system
+> `/etc/fstab`.


 Running
@@ -157,8 +160,10 @@ enabled.  The default Finit rescue mode configuration is installed into

 By default the a root shell, without login, is started.

-> **Note:** in this mode `initctl` will not work.  Use the `-f` flag to
-> force `reboot`, `shutdown`, or `poweroff`.
+> [!IMPORTANT]
+> In rescue mode `initctl` will not work, the same goes for `reboot`,
+> `shutdown`, and `poweroff` commands, provided they are the Finit
+> versions of these commands.  Use the `-f` flag to force the action.


 Debugging
@@ -187,8 +192,9 @@ kernel usually reboots: `configure --enable-emergency-shell`.  However,
 the behavior of Finit is severely limited when this is enabled, so use
 it only for debugging start up issues when Finit crashes.

-**NOTE:** Neither of these options should be enabled on production
-         systems since they can potentially give a user root access.
+> [!CAUTION]
+> None of these options should be enabled on production systems since
+> they can potentially give a user root access.


 [1]:       ftp://troglobit.com/finit/finit-4.3.tar.gz
@@ -4,10 +4,11 @@ Tips & Tricks with the kernel cmdline
 This document summarizes the different boot parameters that can be
 passed on the Linux kernel command line.  Not limited to Finit.

-The `bool` setting is one of `on, off, true false, 1, 0`.
+> [!IMPORTANT]
+> Remember to use `--` to separate kernel parameters from parameters to
+> init.  E.g., `init=/sbin/finit -- finit.debug rescue`

-> **NOTE:** remember to use `--` to separate kernel parameters from
-> parameters to init.  E.g., `init=/sbin/finit -- finit.debug rescue`
+The `bool` setting is one of `on, off, true false, 1, 0`.

 * `debug`: Enable kernel debug.  Debug messages are printed to the
   console until Finit starts up, unless `loglevel=7` (below) is used.
@@ -30,7 +31,8 @@ The `bool` setting is one of `on, off, true false, 1, 0`.
  Very useful for selecting different boot modes, e.g. manufacturing test,
  firmware upgrade, or rescue mode.

-  > Note: `<boot/...>` conditions cannot be cleared with `initctl`!
+> [!NOTE]
+> `<boot/...>` conditions cannot be cleared with `initctl`!

 * `finit.config=/path/to/alternative/finit.conf`: override the
  compile-time bootstrap config file, default:
@@ -27,6 +27,16 @@ specified separated by comma.  Multiple conditions are logically AND'ed
 during evaluation, i.e. all conditions must be satisfied in order for a
 service to run.

+A special syntax, using a leading `!` in run/task/service conditions,
+denote if a:
+
+ - service does not support `SIGHUP`
+ - run/task should not block runlevel changes (i.e., bootstrap)
+
+Finit guarantees by default that all run/tasks run (at least) once
+per runlevel.  For most tasks this is a good default, for example
+checking SSH host keys or loading keymap.  However, for conditions
+that are unlikely to happen it is not. (See example below.)

 ### Example

@@ -37,9 +47,23 @@ both the `pid/setupd` *and* `pid/zebra` conditions are satisfied.  A
 `pid/` condition is satisfied by the corresponding service's PID file
 being created, i.e., the service's default readiness notification.

-**NOTE:** Conditions also stop services when a condition is no longer
-  asserted.  I.e., if the Zebra process above stops or restarts, netd
-  will also stop or restart.
+> [!IMPORTANT]
+> Conditions also stop services when a condition is no longer asserted.
+> I.e., if the `zebra` process above stops or restarts, `netd` will also
+> stop or restart.
+
+Another example is `dropbear`, it does not support `SIGHUP`, but we can
+also see optional sourcing of arguments from an environment file:
+
+    service [2345789] <!> env:-/etc/default/dropbear dropbear -F -R $DROPBEAR_ARGS -- Dropbear SSH daemon
+
+Finally, the weird "block runlevel changes" example.  Here we see what
+happens when Finit receives `SIGPWR`, sent from a power daemon like
+[powstatd(8)][].  A condition is asserted and a user can set up their
+own task to act on it.  We do not want this task to block Finit from
+moving to the next runlevel after bootstrap, so we set `<!>`:
+
+    task [S0123456789] <!sys/pwr/fail> name:pwrfail initctl poweroff -- Power failure, shutting down


 Triggering
@@ -83,11 +107,16 @@ on this, see [Internals](#internals).)  Thus, after a reconfiguration it
 is up to the "owner" of the condition to convey the new (or possibly
 unchanged) state of it.

-> **Note:** For `pid/` conditions it is expected that services "touch"
->           or recreate their PID file on `SIGHUP`.
-
 Static (one-shot) conditions, like `usr/`, never enter the `flux` state.

+> [!IMPORTANT]
+> For `pid/` conditions it is expected that the service reassert, i.e.,
+> "touch" or recreate, their PID file on `SIGHUP`.  This can be done by
+> calling `utimensat()` on the PID file.  Provided, of course, that the
+> service supports reloading on `SIGHUP`, otherwise it will be restarted
+> by Finit when they instead exit on the signal.  For such services, use
+> `<!>` to tell Finit the service does not support `SIGHUP`.
+

 Built-in Conditions
 -------------------
@@ -148,9 +177,10 @@ Built-in conditions:
 - `boot/arg`
 - `dev/node` and `dev/dir/node`

-**Note:** `up` means administratively up, the interface flag `IFF_UP`.
-  `running` is the `IFF_RUNNING` flag, meaning operatively up.  The
-  difference is that `running` tells if the NIC has link.
+> [!NOTE]
+> Here, `up` means administratively up, the interface flag `IFF_UP`.
+> `running` is the `IFF_RUNNING` flag, meaning operatively up.  The
+> difference is that `running` tells if the NIC has link.


 Composition
@@ -182,8 +212,9 @@ the service stanza for the daemon.  It is far from optimal since any
 synchronization of depending services may fail due to the daemon not
 having reinitialized/created their IPC sockets, or similar.

-> **Note:** in versions of Finit prior to v4, the PID conditions were
->           called 'svc' conditions, and they were far more complex.
+> [!NOTE]
+> In versions of Finit prior to v4, the PID conditions were called 'svc'
+> conditions, and they were far more complex.


 Debugging
@@ -260,3 +291,5 @@ Therefore, any plugin that supplies Finit with conditions must ensure
 that their state is updated after each reconfiguration.  This can be
 done by binding to the `HOOK_SVC_RECONF` hook.  For an example of how
 to do this, see `plugins/pidfile.c`.
+
+[powstatd(8)]: https://manpages.ubuntu.com/manpages/trusty/en/man8/powstatd.8.html
@@ -18,8 +18,8 @@ Finit Configuration
  * [Alternate rcS.d/](#alternate-rcs-d-)
  * [Resource Limits](#resource-limits)
  * [Runlevels](#runlevels)
-  * [One-shot Commands (sequence)](#one-shot-commands--sequence-)
-  * [One-shot Commands (parallel)](#one-shot-commands--parallel-)
+  * [One-shot Commands (sequence)](#one-shot-commands-sequence)
+  * [One-shot Commands (parallel)](#one-shot-commands-parallel)
  * [SysV Init Scripts](#sysv-init-scripts)
  * [Services](#services)
  * [Run-parts Scripts](#run-parts-scripts)
@@ -46,27 +46,58 @@ Plugins start at [hook points](plugins.md#hooks) and can run various set
 up, or install event handlers that later provide runtime services, e.g.,
 PID file monitoring, or [conditions](conditions.md).

-> **Tip:** see [SysV Init Compatibility](#sysv-init-compatibility) for
-> help to quickly get going with an existing SysV or BusyBox init setup.
+> [!TIP]
+> See [SysV Init Compatibility](#sysv-init-compatibility) for help to
+> quickly get going with an existing SysV or BusyBox init setup.


 ### Configuration Files

-Originally Finit was configured using a single file, `/etc/finit.conf`.
-Although still possible to use this single configuration file, today the
-following familiar layout is recommended:
+Originally Finit was configured using a single file, `/etc/finit.conf`,
+and although still possible to use a single configuration file, today
+the following layout is recommended:

-    /etc/
-      |- finit.d/
-      |   |- available/
-      |   |   `- my-service.conf
-      :   |- enabled/
-      :   |   `- my-service.conf -> ../available/my-service.conf
-      :   :
-      :   |- static-service.conf
-      :   `- another-static.conf
-      :
-      `- finit.conf
+    /
+    |- etc/
+    |  |- finit.d/
+    |  |   |- available/
+    |  |   |  `- my-service.conf
+    |  :   |- enabled/
+    |  :   |  `- my-service.conf -> ../available/my-service.conf
+    |  :   :
+    |  :   |- static-service.conf
+    |  :   `- another-static.conf
+    |  :
+    |  `- finit.conf
+    |- lib
+    |   `- finit/
+    |       `- system/
+    |           |- 10-hotplug.conf
+    |           `- ...
+    `- run/
+        `- finit/
+            `- system/
+                |- dbus.conf
+                |- keventd.conf
+                |- runparts.conf
+                |- watchdogd.conf
+                `- ...
+
+Configuration files in `/etc` are provided by the user, or projects like
+[finit-skel](https://github.com/troglobit/finit-skel) and extended by
+the user.
+
+The files in `/lib/finit/system/*.conf` are system critical services and
+setup provided by Finit, e.g. udev/mdev that must run very early at system
+bootstrap.  This system directory was introduced in Finit v4.4 to replace
+the hard-coded services provided by plugins before.  All .conf files in this
+directory be either replaced by a system administrator or overridden by a
+file with the same name in `/etc/finit.d/`.
+
+The files in `/run/finit/system/*.conf` are created by plugins and Finit
+bundled services like runparts, the [watchdog](#watchdog), and `keventd`
+if they are enabled.  Like `/lib/finit/system/*.conf`, these files can
+ be overridden by file with the same name in `/etc/finit.d/`.

 Services in the `available/` and `enabled/` sub-directories are called
 dynamic services, in contrast to static services -- the only difference
@@ -75,12 +106,31 @@ with the `enable` and `disable` commands.  An administrator can always
 create files and symlinks manually.

 At bootstrap, and `initctl reload`, all .conf files are read, starting
-with `finit.conf`, then, in alphabetical order, all `finit.d/*.conf`
-files, and finally (still in alphabetical order) all `enabled/*.conf`
-files.
+with `finit.conf`, then `/lib/finit/system/*.conf`, `finit.d/*.conf`,
+and finally all `finit.d/enabled/*.conf` files.  Each directory is a
+unique group, where files within each group are sorted alphabetically.

-> **Note:** the `finit.conf` and `finit.d/` names are only defaults.
-> They can be changed at compile-time with two `configure` options:
+**Example:**
+
+    /lib/finit/system/10-hotplug.conf
+    /lib/finit/system/90-testserv.conf
+    /run/finit/system/dbus.conf
+    /run/finit/system/runparts.conf
+    /etc/finit.d/10-abc.conf
+    /etc/finit.d/20-abc.conf
+    /etc/finit.d/enabled/1-aaa.conf
+    /etc/finit.d/enabled/1-abc.conf
+
+The resulting combined configuration is read line by line, each `run`,
+`task`, and `service` added to an ordered list that ensures they are
+started in the same order.  This is important because of the blocking
+properties of the `run` statement.  For an example on the relation of
+`service` and `run` statements, and dependency handling between them,
+see [Conditional Loading](#conditional-loading), below.
+
+> [!NOTE]
+> The names `finit.conf` and `finit.d/` are only defaults.  They can be
+> changed at compile-time with two `configure` options:
 > `--with-config=/etc/foo.conf` and `--with-rcsd=/var/foo.d`.
 >
 > They can also be overridden from the [kernel command line](cmdline.md)
@@ -126,18 +176,23 @@ layout, as specified in the [FHS][]:
         |- spool/
         `- tmp/

-Finit starts (very early) by mounting `/dev`, `/proc/`, and `/sys`,
-unless they (i.e., `/dev`) are already mounted.  When all plugins and
-other, core Finit functions, have been set up, all relevant filesystems
-(`PASS > 0`) are checked and mounted from the selected `fstab`, either
+Finit starts by mounting the critical file systems `/dev`, `/proc/`, and
+`/sys`, unless they are already mounted.  When all plugins and other,
+core Finit functions, have been set up, all relevant filesystems (where
+`PASS > 0`) are checked and mounted from the selected `fstab`, either
 the default `/etc/fstab`, or any custom one selected from the command
 line, or at build time.

-Any file system not listed `fstab` are automatically mounted by Finit,
-as listed above, provided their respective mount point exists.
+To provide a smooth ride, file system not listed in the given `fstab`,
+e.g. `/tmp` and `/run`, are automatically mounted by Finit, as listed
+above, provided their respective mount point exists.

 With all filesystems mounted, Finit calls `swapon`.

+> [!TIP]
+> To see what happens when all filesystems are mounted, have a look at
+> the [`bootmisc.so` plugin](plugins.md).
+
 At shutdown, and after having stopped all services and other lingering
 processes have been killed, filesystems are unmounted in the reverse
 order, and `swapoff` is called.
@@ -146,6 +201,18 @@ order, and `swapoff` is called.

 ### Runlevels

+Finit supports runlevels, but unlike other init systems runlevels are
+declared per service/run/task/sysv command.  When booting up a system
+Finit pass through three phases:
+
+ 1. Setting up the console, parsing any command line options, and other
+    housekeeping tasks like mounting all filesystems, and calling `fsck`
+ 2. Starting all run/task/services in runlevel S, then waiting for all
+    services to have started, and all run/tasks to have completed
+ 3. Go to runlevel 2, or whatever the user has set in the configuration
+
+Available runlevels:
+
 - `  S`: bootStrap
 - `  1`: Single user mode
 - `2-5`: traditional multi-user mode
@@ -153,36 +220,40 @@ order, and `swapoff` is called.
 - `7-9`: multi-user mode (extra)
 - `  0`: shutdown

-Runlevels are declared per service/run/task/sysv command.  Starting in
-runlevel S ([bootStrap](bootstrap.md)), usually only for tasks supposed
-to run once at boot, and services like `syslogd`, which you need to
-start and run throughout the whole time your system is up.  Before `S`
-is started, however, Finit performs a lot of housekeeping tasks like
-mounting all filesystems, calling `fsck` if needed, and making sure the
-everything is OK.
+Runlevel S (bootStrap), is for tasks supposed to run once at boot, and
+services like `syslogd`, which need to start early and run throughout
+the lifetime of your system.
+
+Example:

    task [S] /lib/console-setup/console-setup.sh
    service [S12345] env:-/etc/default/rsyslog rsyslogd -n $RSYSLOGD_ARGS

-After runlevel S, Finit proceeds to runlevel 2.  This can be changed in
-`/etc/finit.conf` using the `runlevel N` directive, or by a script
-running in runlevel S that calls, e.g., `initctl runlevel 9`.  The
-latter is useful if startup scripts detect problems outside of Finit's
-control, e.g., critical services/devices missing or hardware problems.
+When bootstrap has completed, Finit moves to runlevel 2.  This can be
+changed in `/etc/finit.conf` using the `runlevel N` directive, or by a
+script running in runlevel S that calls, e.g., `initctl runlevel 9`.
+The latter is useful if startup scripts detect problems outside of
+Finit's control, e.g., critical services/devices missing or hardware
+problems.

-Before starting the services in runlevel 2, Finit first stops everything
-that is not allowed to run in 2, and then brings up networking.
-Networking is expected to be available in all runlevels except: S, 1
-(single user level), 6, and 0.  Networking is enabled either by the
-`network script` directive, or if you have an `/etc/network/interfaces`
-file, Finit calls `ifup -a` -- at the very least the loopback interface
-is brought up.
+Each runlevel must be allowed to "complete".  Meaning, all services in
+runlevel S must have started and all run/tasks have been started and
+collected (exited).  Finit waits 120 seconds for all run/tasks in S to
+complete before proceeding to 2.

-> **Note:** when moving from runlevel S to 2, all run/task/services that
-> were constrained to runlevel S only are dropped from bookkeeping.  So
-> when reaching the prompt, `initctl` will not show these run/tasks.
-> This is a safety mechanism to prevent bootstrap-only tasks from
-> accidentally being run again.  E.g., `console-setup.sh` above.
+Finit first stops everything that is not allowed to run in 2, and then
+brings up networking.  Networking is expected to be available in all
+runlevels except: S, 1 (single user level), 6, and 0.  Networking is
+enabled either by the `network script` directive, or if you have an
+`/etc/network/interfaces` file, Finit calls `ifup -a` -- at the very
+least the loopback interface is brought up.
+
+> [!NOTE]
+> When moving from runlevel S to 2, all run/task/services that were
+> constrained to runlevel S only are dropped from bookkeeping.  So when
+> reaching the prompt, `initctl` will not show these run/tasks.  This is
+> a safety mechanism to prevent bootstrap-only tasks from accidentally
+> being run again.  E.g., `console-setup.sh` above.


 ### Managing Services
@@ -269,7 +340,8 @@ the `ps` command we can see that the process is started with:

    foo -n --extra-arg=bar -s -x

-> **Note:** the leading `-` determines if Finit should treat a missing
+> [!NOTE]
+> The leading `-` in `env:` determines if Finit should treat a missing
 > environment file as blocking the start of the service or not.  When
 > `-` is used, a missing environment file does *not* block the start.

@@ -303,26 +375,41 @@ most notably systemd and s6, other methods for signaling "readiness"
 arrived and daemons were adapted to these new schemes to a larger
 extent.

-As of Finit v4.4 partial support for systemd and s6 is available.  The
-native PID file mode of operation is still default, the other's can be
-defined per service, like this:
+As of Finit v4.4 partial support for systemd and s6 style readiness
+notification is available, and the native PID file mode of operation is,
+as of Finit v4.6 optional, by default it is still enabled, but this can
+be changed in `finit.conf`:

+    readiness none
+
+This will be made the default in Finit 5.0.  In this mode of operation,
+every service needs to explicitly declare their readiness notification,
+like this:
+
+    service notify:pid     watchdogd
    service notify:systemd foo
    service notify:s6      bar
+    service notify:none    qux
+
+The `notify:none` syntax is for completeness in systems which run in
+`readiness pid` mode (default).  Services declared with `notify:none`
+will assert ready condition as soon as Finit has started them, e.g.,
+`service/qux/ready`.

 To synchronize two services the following condition can be used:

-    service notify:systemd    A
-    service <service/A/ready> B
+    service notify:pid                 watchdogd
+    service <service/watchdogd/ready>  stress-ng --cpu 8

 For details on the syntax and options, see below.

-> **Note:** on `initctl reload` conditions are normally set in "flux",
-> while figuring out which to stop, start or restart.  Services that
-> need to be restarted have their `ready` condition removed prior to
-> Finit sending them SIGHUP (if they support that), or stop-starting
-> them.  A daemon is expected to reassert its readiness, e.g. systemd
-> style daemons to write `READY=1\n`.
+> [!NOTE]
+> On `initctl reload` conditions are set in "flux", while figuring out
+> which to stop, start or restart.  Services that need to be restarted
+> have their `ready` condition removed prior to Finit sending them
+> SIGHUP (if they support that), or stop-starting them.  A daemon is
+> expected to reassert its readiness, e.g. systemd style daemons to
+> write `READY=1\n`.
 >
 > However, the s6 notify mode does not support this because in s6 you
 > are expected to close your notify descriptor after having written
@@ -362,9 +449,10 @@ example employs a wrapper script in `/etc/start.d`.
        # Execute the program
        exec /usr/bin/program $OPTIONS

-> **Note:** the example sets `<!>` to denote that it doesn't support
->           `SIGHUP`.  That way Finit will stop/start the service
->           instead of sending SIGHUP at restart/reload events.
+> [!NOTE]
+> The example sets `<!>` to denote that it doesn't support `SIGHUP`.
+> That way Finit will stop/start the service instead of sending SIGHUP
+> at restart/reload events.


 Templating
@@ -392,7 +480,7 @@ Cgroups

 There are three major cgroup configuration directives:

- 1. Global top-level group: init, system, user, or a custom group
+ 1. Global top-level group: `init`, `system`, `user`, or a custom group
 2. Selecting a top-level group for a set of run/task/services
 3. Per run/task/service limits

@@ -443,6 +531,11 @@ except for expanding the shorthand `mem.` to `memory.`, if the file is
 not available, either the cgroup controller is not available in your
 Linux kernel, or the name is misspelled.

+A daemon using `SCHED_RR` currently need to run outside the default cgroups.
+
+    service [...] <...> cgroup.root /path/to/daemon arg -- Real-Time process
+
+> [!NOTE]
 > Linux cgroups and details surrounding values are not explained in the
 > Finit documentation.  The Linux admin-guide cover this well:
 > <https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html>
@@ -468,12 +561,9 @@ service name:sysklogd [S123456789]   \
 ```

 The .conf files `/etc/finit.conf` and `/etc/finit.d/*` support the
-following directives:
-
-
-> **Note:** not all directives are available in `/etc/finit.d/*.conf`
-> and some directives are only available at [bootstrap][], runlevel `S`,
-> see [Limitations](#limitations) below for details.
+following directives.  Some directives have restrictions, e.g., only
+available at bootstrap, runlevel `S`, see [Limitations](#limitations)
+below for details.


 ### Hostname
@@ -485,7 +575,8 @@ the contents of that file is used.

 Deprecated.  We recommend using `/etc/hostname` instead.

-> **Note:** only read and executed in runlevel S ([bootstrap][]).
+> [!NOTE]
+> Only read and executed in runlevel S (bootstrap).


 ### Kernel Modules
@@ -503,7 +594,8 @@ BusyBox mdev tool, add to `/etc/mdev.conf`:

    $MODALIAS=.*  root:root       0660    @modprobe -b "$MODALIAS"

-> **Note:** only read and executed in runlevel S ([bootstrap][]).
+> [!NOTE]
+> Only read and executed in runlevel S (bootstrap).


 ### Networking
@@ -516,7 +608,8 @@ Deprecated.  We recommend using dedicated task/run stanzas per runlevel,
 or `/etc/network/interfaces` if you have a system with `ifupdown`, like
 Debian, Ubuntu, Linux Mint, or an embedded BusyBox system.

-> **Note:** only read and executed in runlevel S ([bootstrap][]).
+> [!NOTE]
+> Only read and executed in runlevel S (bootstrap).


 ### Alternate finit.d/
@@ -537,8 +630,9 @@ another set of .conf files, e.g.:

    rcsd /etc/factory.d

-> **Note:** this directive is only available from the top-level
-> bootstrap .conf file.
+> [!NOTE]
+> This directive is only available from the top-level bootstrap .conf
+> file, usually `/etc/finit.conf`.

 ### Resource Limits

@@ -571,16 +665,18 @@ stanzas can share the same rlimits if they are in the same .conf.

 **Syntax:** `runlevel <N>`

-The system runlevel to go to after [bootstrap][] (S) has completed.  `N`
-is the runlevel number 0-9, where 6 is reserved for reboot and 0 for
-halt.
+The system runlevel to go to after bootstrap (S) has completed.  `N` is
+the runlevel number 0-9, where 6 is reserved for reboot and 0 for halt.
+Completed in this context means all services have been started and all
+run/tasks have been started and collected.

 It is recommended to keep runlevel 1 as single-user mode, because
 Finit disables networking in this mode.

 *Default:* 2

-> **Note:** only read and executed in runlevel S ([bootstrap][]).
+> [!NOTE]
+> Only read and executed in runlevel S (bootstrap).


 ### One-shot Commands (sequence)
@@ -594,10 +690,11 @@ optional arguments and description.  `run` commands are guaranteed to be
 completed before running the next command.  Useful when serialization is
 required.

-> **Warning:** try to avoid the `run` command.  It blocks much of the
-> functionality in Finit, like (re)starting other (perhaps crashing)
-> services while a `run` task is executing.  Use other synchronization
-> mechanisms instead, like conditions.
+> [!WARNING]
+> Try to avoid the `run` command.  It blocks much of the functionality
+> in Finit, like (re)starting other (perhaps crashing) services while a
+> `run` task is executing.  Use other synchronization mechanisms
+> instead, like conditions.

 Incomplete list of unsupported `initctl` commands in `run` tasks:

@@ -620,11 +717,14 @@ also the `--quiet` and `--batch` options.

 One-shot like 'run', but starts in parallel with the next command.
  
-Both `run` and `task` commands are run in a shell, so pipes and
-redirects can be freely used:
+Both `run` and `task` commands are run in a shell, so basic pipes and
+redirects can be used:

    task [s] echo "foo" | cat >/tmp/bar

+Please note, `;`, `&&`, `||`, and similar are *not supported*.  Any
+non-trivial constructs are better placed in a separate shell script.
+

 ### SysV Init Scripts

@@ -634,7 +734,7 @@ redirects can be freely used:

 Similar to `task` is the `sysv` stanza, which can be used to call SysV
 style scripts.  The primary intention for this command is to be able to
-re-use much of existing setup and init scripts in Linux distributions.
+reuse much of existing setup and init scripts in Linux distributions.
  
 When entering an allowed runlevel, Finit calls `init-script start`, when
 entering a disallowed runlevel, Finit calls `init-script stop`, and if
@@ -649,7 +749,8 @@ file, but rather watch that file for the resulting forked-off PID.  This
 syntax also works for forking daemons that do not have a command line
 option to run it in the foreground, more on this below in `service`.

-> **Tip:** see also [SysV Init Compatibility](#sysv-init-compatibility).
+> [!TIP]
+> See also [SysV Init Compatibility](#sysv-init-compatibility).


 ### Services
@@ -657,13 +758,13 @@ option to run it in the foreground, more on this below in `service`.
 **Syntax:** `service [LVLS] <COND> /path/to/daemon ARGS -- Optional description`

 Service, or daemon, to be monitored and automatically restarted if it
-exits prematurely.  Finit tries to restart services that die, by
-default 10 times before giving up and marking them as *crashed*.
-After which they have to be manually restarted with `initctl restart
-NAME`.  The limits controling this are configurable, see the options
-below.
+exits prematurely.  Finit tries to restart services that die, by default
+10 times before giving up and marking them as *crashed*.  After which
+they have to be manually restarted with `initctl restart NAME`.  The
+limits controlling this are configurable, see the options below.

-> **Tip:** to allow endless restarts, see below option `respawn`
+> [!TIP]
+> To allow endless restarts, see below option `respawn`
  
 For daemons that support it, we recommend appending `--foreground`,
 `--no-background`, `-n`, `-F`, or similar command line argument to
@@ -816,33 +917,52 @@ configurable with the following options:
  * `oncrash:script` -- similarly, but instead of rebooting, call the
    `post:script` action if set, see below.

-When stopping a service (run/task/sysv/service), either manually or
-when moving to another runlevel, Finit starts by sending `SIGTERM`, to
-allow the process to shut down gracefully.  If the process has not
-been collected within 3 seconds, Finit sends `SIGKILL`.  To halt the
-process using a different signal, use the option `halt:SIGNAL`, e.g.,
-`halt:SIGPWR`.  To change the delay between your halt signal and KILL,
-use the option `kill:SEC`, e.g., `kill:10` to wait 10 seconds before
-sending `SIGKILL`.
+When stopping a service (run/task/sysv/service), either manually or when
+moving to another runlevel, Finit starts by sending `SIGTERM`, to allow
+the process to shut down gracefully.  However, if the process has not
+been collected within 3 seconds, Finit will send `SIGKILL`.  To stop the
+process using a different signal than `SIGTERM`, use `halt:SIGNAL`,
+e.g., `halt:SIGPWR`.  To change the delay between the stop signal and
+KILL, use the option `kill:<1-60>`, e.g., `kill:10` to wait 10 seconds
+before sending `SIGKILL`.

-Services support `pre:script` and `post:script` actions as well.  These
-run as the same `@USER:GROUP` as the service itself, with any `env:file`
-sourced.  The scripts must use an absolute path, but are executed from
-the `$HOME` of the given user.  The scripts are not called with any
-argument (currently), but both get the `SERVICE_IDENT=foo` environment
-variable set.  Here `foo` denotes the identity of the service, which if
-there are multiple services named `foo`, may be `foo:1`, or any unique
-identifier specified in the .conf file.  The `post:script` is called
-with an additional set of environment variables:
+Services, including the `sysv` variant, support pre/post/ready and
+cleanup scripts:

- - `EXIT_CODE=[exited,signal]`: set to one of `exited` or `signal`
+  * `pre:[0-3600,]script` -- called before the sysv/service is stated
+  * `post:[0-3600,]script` -- called after the sysv/service has stopped
+  * `ready:[0-3600,]script` -- called when the sysv/service is ready
+  * `cleanup:[0-3600,]script` -- called when run/task/sysv/service is removed
+
+The optional number (0-3600) is the timeout before Finit kills the
+script, it defaults to the kill delay value and can be disabled by
+setting it to zero.  These scripts run as the same `@USER:GROUP` as the
+service itself, with any `env:file` sourced.  The scripts are executed
+from the `$HOME` of the given user.  The scripts are not called with any
+argument, but get a set of environment variables:
+
+  * `SERVICE_IDENT=foo:1`
+  * `SERVICE_NAME=foo`
+  * `SERVICE_ID=1`
+
+The `post:script` is called with an additional set of environment
+variables.  Yes, the text is correct, the naming was an accident:
+
+ - `EXIT_CODE=[exited,signal,crashed]`: normal exit, signaled, or
+   crashed
 - `EXIT_STATUS=[num,SIGNAME]`: set to one of exit status code from
   the program, if it exited normally, or the signal name (`HUP`,
   `TERM`, etc.) if it exited due to signal

-These script actions *must terminate*, so they have a default execution
-time of 3 seconds before they are SIGKILLed, this can be adjusted using
-the above `kill:SEC` syntax.
+When a run/task/sys/service is removed (disable + reload) it is first
+stopped and then removed from the runlevel.  The `post:script` always
+runs when the process has stopped, and the `cleanup:script` runs when
+the the stanza has been removed from the runlevel.
+
+> [!IMPORTANT]
+> These script actions are intended for setup, cleanup, and readiness
+> notification.  It is up to the user to ensure the scripts terminate.
+

 #### Conditional Loading

@@ -860,7 +980,7 @@ if that is not found Finit automatically logs a warning.  The `nowarn`
 option disables this warning so that the second line can be evaluated,
 which also provides a service named `udevd`.

-    run nowarn if:udevd <pid/udevd> udevadm settle -t 0
+    run nowarn if:udevd <pid/udevd> :1 udevadm settle -t 0

 This line is only loaded if we know of a service named `udevd`.  Again,
 we do not warn if `udevadm` is not found, Execution will also stop here
@@ -915,9 +1035,8 @@ previous stanza can also be written as:
 **Syntax:** `runparts [progress] [sysv] <DIR>`

 Call [run-parts(8)][] on `DIR` to run start scripts.  All executable
-files, or scripts, in the directory are called, in alphabetic order.
-The scripts in this directory are executed at the very end of runlevel
-`S`, [bootstrap][].
+files in the directory are called, in alphabetic order.  The scripts in
+this directory are executed at the very end of runlevel `S`.

 A common use-case for runparts scripts is to create and enable/disable
 services, which Finit will then apply when changing runlevel from S to
@@ -942,10 +1061,10 @@ before continuing.  None of them can issue commands to start, stop, or
 restart other services.  Also, ensure all your services and programs
 either terminate or start in the background or you will block Finit.

-> **Note:** `runparts` scrips are only read and executed in runlevel S
-> ([bootstrap][]).  See [hook scripts](plugins.md#hooks) for other ways
-> to run scripts at certain points during the complete lifetime of the
-> system.
+> [!NOTE]
+> `runparts` scripts are only read and executed in runlevel S.  See
+> [hook scripts](plugins.md#hooks) for other ways to run scripts at
+> certain points during the complete lifetime of the system.

 **Recommendations:**

@@ -1058,8 +1177,8 @@ can be omitted to keep the kernel default.
    tty [12345] @console noclear vt220

 On really bare bones systems, or for board bringup, Finit can give you a
-shell prompt as soon as [bootstrap][] is done, without opening any
-device node:
+shell prompt as soon as bootstrap is done, without opening any device
+node:

    tty [12345789] notty

@@ -1217,8 +1336,9 @@ This rescue mode can be disabled at configure time using:

 The rescue mode comes in two flavors; *traditional* and *fallback*.

-> **Note:** in this mode `initctl` will not work.  Use the `-f` flag to
-> force `reboot`, `shutdown`, or `poweroff`.
+> [!NOTE]
+> In this mode `initctl` will not work.  Use the `-f` flag to force
+> `reboot`, `shutdown`, or `poweroff`.


 ### Traditional
@@ -1230,11 +1350,12 @@ program is used instead.  If a successful login is made, or if the user
 exits (Ctrl-D), the rescue mode is ended and the system boots up
 normally.

-> **Note:** the bundled sulogin in Finit can at configure time be given
-> another user than the default (root).  If the sulogin user does not
-> have a password, or __the account is locked__, the user is presented
-> with a password-less `"Press enter to enter maintenance mode."`,
-> prompt which opens up a root shell.
+> [!WARNING]
+> The bundled sulogin in Finit can at configure time be given another
+> user than the default (root).  If the sulogin user does not have a
+> password, or __the account is locked__, the user is presented with a
+> prompt: `"Press enter to enter maintenance mode."`, which will open
+> up a root shell *without prompting for password*!


 ### Fallback
@@ -1282,10 +1403,11 @@ These can now also be set in any `.conf` file in `/etc/finit.d`.
 There is, however, nothing preventing you from having all configuration
 settings in `/etc/finit.conf`.

-> **Note:** The `/etc/finit.d` directory was previously the default
->          Finit [runparts](#run-parts-scripts) directory.  Finit >=v4.0
->          no longer has a default `runparts` directory, make sure to
->          update your setup, or the finit configuration, accordingly.
+> [!IMPORTANT]
+> The default `rcsd`, i.e., `/etc/finit.d`, was previously the Finit
+> [runparts](#run-parts-scripts) directory.  Finit >=v4.0 no longer has
+> a default `runparts` directory, make sure to update your setup, or the
+> finit configuration, accordingly.


 Watchdog
@@ -1294,12 +1416,11 @@ Watchdog
 When built `--with-watchdog` a separate service is built and installed
 in `/libexec/finit/watchdogd`.  If this exists at runtime, and the WDT
 device node exists, Finit will start it and treat it as the elected
-watchdog service to delegate its reboot to.  See [bootstrap][] for
-details.  This delegation is to ensure that the system is rebooted by a
-hardware watchdog timer -- on many embedded systems this is crucial to
-ensure all circuits on the board are properly reset for the next boot,
-in effect ensuring the system works the same after both a power-on and
-reboot event.
+watchdog service to delegate its reboot to.  This delegation is to
+ensure that the system is rebooted by a hardware watchdog timer -- on
+many embedded systems this is crucial to ensure all circuits on the
+board are properly reset for the next boot, in effect ensuring the
+system works the same after both a power-on and reboot event.

 The delegation is performed at the very last steps of system shutdown,
 if reboot has been selected and an elected watchdog is known, first a
@@ -1321,8 +1442,6 @@ device descriptor.  If the kernel driver has been built without this,
 the only option is to remove `/libexec/finit/watchdogd` or build without
 it at configure time.

-[bootstrap]: bootstrap.md
-

 keventd
 -------
@@ -34,8 +34,9 @@ build time:
 ./configure --with-rcsd=/etc/init.d --with-config=/etc/init.d/init.conf
 ```

-> **Note:** remember `--prefix` et al as well, the default is likely
->           *not* what you want.  See the [build docs][1] for details.
+> [!IMPORTANT]
+> Remember `--prefix` et al as well, the default is likely *not* what
+> you want.  See the [build docs][1] for details.

 The resulting directory structure is depicted below.  Please notice how
 `/etc/finit.conf` now resides in the same sub-directory as a non-symlink
@@ -28,9 +28,17 @@ For your convenience a set of *optional* plugins are available:
  system and runs at `HOOK_BASEFS_UP`.  The `/var`, `/run`, and `/dev`
  file systems must be writable for this plugin to work.

-  Note: On an embedded system both `/var` and `/run` can be `tmpfs` RAM
-  disks and `/dev` is usually a `devtmpfs`.  This must be defined in the
-  `/etc/fstab` file and in the Linux kernel config.
+  This plugin is a wrapper for the [tmpfiles.d(5)][] implementation that
+  Finit has.  Capable but limited: no aging, attributes, or subvolumes.
+
+  By default, `/lib/finit/tmpfiles.d` carries all the default .conf
+  files distributed with Finit.  It is read first but can be overridden
+  by any of the standard tmpfiles.d directories, e.g. `/etc/tmpfiles.d`.
+
+> [!NOTE]
+> On an embedded system both `/var` and `/run` can be `tmpfs` RAM
+> disks and `/dev` is usually a `devtmpfs`.  This must be defined in
+> the `/etc/fstab` file and in the Linux kernel config.

 * *dbus.so*: Setup and start system message bus, D-Bus, at boot.
  _Optional plugin._
@@ -50,11 +58,15 @@ For your convenience a set of *optional* plugins are available:
  customized at build-time using the `--with-hook-scripts-path=PATH`
  argument to `configure`.

-* *hotplug.so*: Setup and start either udev or mdev hotplug daemon, if
-  available.  Enabled by default.
+* *hotplug.so*: Replaced with `/lib/finit/system/10-hotplug.conf`, which
+  checks for `udevd` and `mdev` at boot.  This file can be overridden by a
+  file in `/etc/finit.d/10-hotplug.conf`.
+
+  Enabled by default.
  
-  > See the [Services](config.md#services) section in the configuration
-  > guide for an example how to run `mdevd`, alternative to plain mdev.
+> [!TIP]
+> See the [Services](config.md#services) section in the configuration
+> guide for an example how to run `mdevd`, alternative to plain mdev.

 * *rtc.so*: Restore and save system clock from/to RTC on boot/halt.
  Enabled by default.
@@ -79,16 +91,17 @@ For your convenience a set of *optional* plugins are available:

        set index 1234

-  **Note:** unlike the traditional .conf `module` directive, which load
-  any listed module immediately, this plugin creates a background `task`
-  which load the module(s) in the background.  The program is modprobe,
-  `/sbin/modprobe`, which you can override per .conf file:
+  Since these tasks run in the background, they return `[ OK ]` at boot,
+  unless the modprobe tool does not exist.  Check syslog for warnings
+  and the actual status of the operation using `initctl`.

-        set modprobe /path/to/maybe-a-modprobe-wrapper
-
-  Since these tasks run in the background, they usually return `[ OK ]`
-  at boot, unless the modprobe tool does not exist.  Check syslog for
-  warnings and the actual status of the operation using `initctl`.
+> [!IMPORTANT]
+> Unlike the traditional .conf `module` directive, which load any listed
+> module immediately, this plugin creates a background `task` which load
+> the module(s) in the background.  The program is modprobe,
+> `/sbin/modprobe`, which you can override per .conf file:
+> 
+>     set modprobe /path/to/maybe-a-modprobe-wrapper

 * *netlink.so*: Listens to Linux kernel Netlink events for gateway and
  interfaces.  These events are then sent to the Finit service monitor
@@ -148,8 +161,10 @@ hook points:
    EOF
    $ chmod +x /libexec/finit/hook/sys/down/foo.sh

-> **Note:** to use hook scripts, even for pre-bootstrap and pre-shutdown
-> tasks, you must build with `configure --enable-hook-scripts-plugin`.
+> [!IMPORTANT]
+> To use hook scripts, even for pre-bootstrap and pre-shutdown tasks,
+> you must build with `configure --enable-hook-scripts-plugin`.
+

 ### Bootstrap Hooks

@@ -217,3 +232,5 @@ Plugins like `tty.so` extend finit by acting on events, they are called
 I/O plugins and are called from the finit main loop when `poll()`
 detects an event.  See the source code for `plugins/*.c` for more help
 and ideas.
+
+[tmpfiles.d(5)]: https://www.freedesktop.org/software/systemd/man/tmpfiles.d.html
@@ -22,8 +22,9 @@ Finit can *not* start and monitor a daemon that:
 | ✔ | No      | No               | Yes, optionally        |
 | ✘ | Yes     | No               | No                     |

-> **Note:** PID files is one mechanism used to assert conditions to
-> synchronize the start and stop of other, dependent, services.
+> [!NOTE]
+> PID files is one mechanism used to assert conditions to synchronize
+> the start and stop of other, dependent, services.

 ### Forks to Background w/ PID File

@@ -175,13 +175,13 @@ task [s] echo "foo" | cat >/tmp/bar
 .Ed
 .It Cm sysv Oo LVLS Oc Ao COND Ac Ar /path/to/script ARGS Op -- Optional description
 Similar to
-.Cm task
+.Cm service
 is the
 .Cm sysv
 stanza, which can be used to call SysV style start/stop scripts.  The
-primary intention for this command is to be able to re-use much of
-existing setup and init scripts in Linux distributions.
-.Pp  
+primary intention for this command is to be able to re-use traditional
+SysV init scripts in Linux distributions.
+.Pp
 When entering an allowed runlevel, Finit calls
 .Cm init-script start ,
 when entering a disallowed runlevel, Finit calls
@@ -434,30 +434,42 @@ e.g.,
 .Cm kill:10
 to wait 10 seconds before sending SIGKILL.
 .Pp
-Services support the
-.Cm pre:script
-and
-.Cm post:script
-command actions as well.  These run as the same
+Services, including the
+.Cm sysv
+variant, support pre/post/ready and cleanup scripts:
+.Bl -tag -width 1n
+.It Cm pre:[0-3600,]script
+called before the sysv/service is stated
+.It Cm post:[0-3600,]script
+called after the sysv/service has stopped
+.It Cm ready:[0-3600,]script
+called when the sysv/service is ready
+.It Cm cleanup:[0-3600,]script
+called when run/task/sysv/service is removed
+.El
+.Pp
+The optional number (0-3600) is the timeout before Finit kills the
+script, it defaults to the kill delay value and can be disabled by
+setting it to zero.  These scripts run as the same
 .Cm @USER:GROUP
 as the service itself, with any
 .Cm env:file
 sourced.  The scripts must use an absolute path, but are executed from
 the
 .Cm $HOME
-of the given user.  The scripts are not called with any argument
-(currently), but both get the
-.Cm SERVICE_IDENT=foo
-environment variable set.  Here
-.Cm foo
-denotes the identity of the service, which if there are multiple
-services named
-.Cm foo ,
-may be
-.Cm foo:1 ,
-or any unique identifier specified in the .conf file.  The
+of the given user.  The scripts are not called with any argument, but
+both get a set of environment variables:
+.Pp
+.Bl -tag -width 1n -compact
+.It Cm SERVICE_IDENT=foo:1
+.It Cm SERVICE_NAME=foo
+.It Cm SERVICE_ID=1
+.El
+.Pp
+The
 .Cm post:script
-is called with an additional set of environment variables:
+is called with an additional set of environment variables, and yes the
+naming looks like it should be swapped:
 .Bl -tag -offset indent -width 1n
 .It Cm EXIT_CODE=[exited,signal,crashed]
 set to one of
@@ -471,10 +483,12 @@ set to one of exit status code from the program, if it exited normally,
 or the signal name (HUP, TERM, etc.) if it exited due to signal
 .El
 .Pp
-The scripts have a default execution time of 3 seconds before they are
-SIGKILLed, this can be adjusted using the
-.Cm kill:SEC
-modifier syntax.
+When a run/task/sys/service is removed (disable + reload) it is first
+stopped and then removed from the runlevel.  The
+.Cm post:script
+always runs when the process has stopped, and the
+.Cm cleanup:script
+runs when the the stanza has been removed from the runlevel.
 .It Cm runparts Aq DIR
 Call
 .Xr run-parts 8
@@ -1,6 +1,6 @@
 /* Save and restore ALSA sound settings using alsactl
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Setup necessary system files for, e.g. UTMP (tracking logins)
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Setup and start system message bus, D-Bus
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -83,6 +83,7 @@ static char *dbus_pidfn(void)
 				break;
 			}
 			*pos = 0;
+			break;
 		}

 		fclose(fp);
@@ -142,23 +143,21 @@ static void setup(void *arg)

 	/* Generate machine id for dbus */
 	if (whichp("dbus-uuidgen"))
-		run_interactive("dbus-uuidgen --ensure", "Creating machine UUID for D-Bus");
+		run_interactive("dbus-uuidgen --ensure", "Verifying D-Bus machine UUID");

 	/*
 	 * Register service with Finit
 	 * Note: dbus drops privs after starting up.
 	 */
 	if (pidfn) {
-		snprintf(line, sizeof(line), "[S123456789] cgroup.system name:dbus pid:!%s %s %s -- %s",
+		snprintf(line, sizeof(line), "[S123456789] cgroup.system notify:none name:dbus pid:!%s %s %s -- %s",
 			 pidfn, cmd, DBUS_ARGS, DBUS_DESC);
 		free(pidfn);
 	} else
-		snprintf(line, sizeof(line), "[S123456789] cgroup.system name:dbus %s %s -- %s",
+		snprintf(line, sizeof(line), "[S123456789] cgroup.system notify:none name:dbus %s %s -- %s",
 			 cmd, DBUS_ARGS, DBUS_DESC);

-	if (service_register(SVC_TYPE_SERVICE, line, global_rlimit, NULL))
-		err(1, "Failed registering %s", DBUS_DAEMON);
-
+	conf_save_service(SVC_TYPE_SERVICE, line, "dbus.conf");
 	free(cmd);
 }

@@ -1,6 +1,6 @@
 /* Coldplug modules using modalias magic
 *
- * Copyright (c) 2021-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2021-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -132,11 +132,10 @@ static FILE *maybe_fopen_alias(const char *file, const char *path)
 {
 	const char *basename;

-	basename = rindex(path, '/');
-	if (!basename)
+	basename = basenm(path);
+	if (!strcmp(basename, path))
 		return NULL;

-	basename++;
 	if (strcmp(file, basename))
 		return NULL;

@@ -41,7 +41,7 @@
 *
 * Please note, the :ID is there for your benefit, it ensures that tasks
 * in Finit are unique.  If you have two tasks with the same name and ID
- * (or no ID), the last one read replaces any preceeding one!
+ * (or no ID), the last one read replaces any preceding one!
 */

 #include <unistd.h>
@@ -2,7 +2,7 @@
 /* Netlink plugin for IFUP/IFDN and GW events
 *
 * Copyright (C) 2009-2011  Mårten Wikström <marten.wikstrom@keystream.se>
- * Copyright (C) 2009-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (C) 2009-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@@ -1,7 +1,7 @@
 /* Simple pidfile event monitor for the Finit condition engine
 *
 * Copyright (c) 2015-2016  Tobias Waldekranz <tobias@waldekranz.com>
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -52,7 +52,7 @@ static int pidfile_add_path(struct iwatch *iw, char *path)
 			ptr = slash++;
 			slash = strchr(ptr, '/');
 			if (slash) {
-				dbg("Path too deep, skipping.");
+				dbg("Path too deep, skipping %s", path);
 				return -1;
 			}
 		}
@@ -66,6 +66,7 @@ static void pidfile_update_conds(char *dir, char *name, uint32_t mask)
 	char cond[MAX_COND_LEN];
 	char fn[PATH_MAX];
 	svc_t *svc;
+	char *nm;

 	paste(fn, sizeof(fn), dir, name);
 	if (fnmatch("*\\.pid", fn, 0) && fnmatch("*/pid", fn, 0))
@@ -79,16 +80,23 @@ static void pidfile_update_conds(char *dir, char *name, uint32_t mask)
 		return;
 	}

-	dbg("Found svc %s for %s with pid %d", svc->name, fn, svc->pid);
+	/* Service condistion to set/clear */
 	mkcond(svc, cond, sizeof(cond));

+	nm = svc_ident(svc, NULL, 0);
+	dbg("Found svc %s for %s with pid %d", nm, fn, svc->pid);
+	if (svc_is_stopping(svc)) {
+		dbg("Ignoring pidfile death rattles while service %s is %s", nm, svc_status(svc));
+		goto sneaky_zebra;
+	}
+
 	if (mask & (IN_CLOSE_WRITE | IN_ATTRIB | IN_MODIFY | IN_MOVED_TO)) {
 		/*
 		 * only mark native services as started, the s6 and
 		 * systemd style services rely on their respective
 		 * readiness notification.  Issue #343
 		 */
-		if (!svc->notify)
+		if (svc->notify == SVC_NOTIFY_PID)
 			svc_started(svc);

 		if (!svc_has_pidfile(svc)) {
@@ -120,13 +128,15 @@ static void pidfile_update_conds(char *dir, char *name, uint32_t mask)
 			}
 		}

-		cond_set(cond);
-		if (!svc->notify)
-			service_ready(svc);
+		if (svc->notify == SVC_NOTIFY_PID)
+			cond_set(cond);
+		if (svc->notify == SVC_NOTIFY_PID || svc->notify == SVC_NOTIFY_NONE)
+			service_ready(svc, 1);
 	} else if (mask & IN_DELETE) {
+	sneaky_zebra:
 		cond_clear(cond);
-		if (!svc->notify)
-			service_ready(svc);
+		if (svc->notify == SVC_NOTIFY_PID)
+			service_ready(svc, 0);
 	}
 }

@@ -240,8 +250,8 @@ static void pidfile_reconf(void *arg)
 		if (svc_is_changed(svc) || svc_is_starting(svc))
 			continue;

-		if (!svc->notify)
-			service_ready(svc);
+		if (svc->notify == SVC_NOTIFY_PID)
+			service_ready(svc, 1);

 		mkcond(svc, cond, sizeof(cond));
 		if (cond_get(cond) == COND_ON)
@@ -1,6 +1,6 @@
 /* Set kernel variables from /etc/sysctl.conf et al
 *
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -32,6 +32,10 @@
 #include "helpers.h"
 #include "plugin.h"

+#ifndef SYSCTL_PATH
+#define SYSCTL_PATH "/sbin/sysctl"
+#endif
+
 static void setup(void *arg)
 {
 	glob_t gl;
@@ -54,7 +58,7 @@ static void setup(void *arg)
 		for (i = 0; i < gl.gl_pathc; i++) {
 			char cmd[160];

-			snprintf(cmd, sizeof(cmd), "/sbin/sysctl -e -p %s >/dev/null", gl.gl_pathv[i]);
+			snprintf(cmd, sizeof(cmd), "%s -e -p %s >/dev/null", SYSCTL_PATH, gl.gl_pathv[i]);
 			run(cmd, "sysctl");
 		}
 		globfree(&gl);
@@ -1,6 +1,6 @@
 /* Setup necessary files for resolvconf
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Save and restore RTC using hwclock
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -36,8 +36,15 @@
 #include "helpers.h"
 #include "plugin.h"

-/* Kernel RTC driver validates against this date for sanity check */
+/*
+ * Kernel RTC driver validates against this date for sanity check.  The
+ * on NTP sync the driver can also update the RTC every 11 mins.  We use
+ * the same update interval to handle manual time set and file save.
+ */
 #define RTC_TIMESTAMP_BEGIN_2000 "2000-01-01 00:00:00"
+#define RTC_FMT                  "%Y-%m-%d %H:%M:%S"
+#define RTC_PERIOD               (11 * 60 * 1000)
+
 #ifdef  RTC_TIMESTAMP_CUSTOM
 static char  *rtc_timestamp     = RTC_TIMESTAMP_CUSTOM;
 #else
@@ -45,6 +52,10 @@ static char  *rtc_timestamp     = RTC_TIMESTAMP_BEGIN_2000;
 #endif
 static time_t rtc_date_fallback = 946684800LL;

+static char  *rtc_file          = RTC_FILE;
+static uev_t  rtc_timer;
+
+
 static void tz_set(char *tz, size_t len)
 {
 	char *ptr;
@@ -68,6 +79,125 @@ static void tz_restore(char *tz)
 	tzset();
 }

+static int time_set(struct tm *tm)
+{
+	struct tm fallback = { 0 };
+	struct timeval tv = { 0 };
+	char tz[128];
+	int rc = 0;
+
+	tz_set(tz, sizeof(tz));
+
+	if (!tm) {
+		logit(LOG_NOTICE, "Resetting system clock to kernel default, %s.", rtc_timestamp);
+		tm = &fallback;
+
+		/* Attempt to set RTC to a sane value ... */
+		tv.tv_sec = rtc_date_fallback;
+		if (!gmtime_r(&tv.tv_sec, tm)) {
+			rc = 1;
+			goto out;
+		}
+	}
+
+	tm->tm_isdst = -1; /* Use tzdata to figure it out, please. */
+	tv.tv_sec = mktime(tm);
+	if (tv.tv_sec == (time_t)-1 || tv.tv_sec < rtc_date_fallback) {
+		errno = EINVAL;
+		rc = 2;
+	} else {
+		if (settimeofday(&tv, NULL) == -1)
+			rc = 1;
+	}
+out:
+	tz_restore(tz);
+	return rc;
+}
+
+static int time_get(struct tm *tm)
+{
+	struct timeval tv = { 0 };
+	char tz[128];
+	int rc = 0;
+
+	tz_set(tz, sizeof(tz));
+
+	rc = gettimeofday(&tv, NULL);
+	if (rc < 0 || tv.tv_sec < rtc_date_fallback)
+		rc = 2;
+	else
+		gmtime_r(&tv.tv_sec, tm);
+
+	tz_restore(tz);
+
+	return rc;
+}
+
+static void file_save(void *arg)
+{
+	struct tm tm = { 0 };
+	int rc = 0;
+	FILE *fp;
+
+	if (!rtc_file)
+		return;
+
+	fp = fopen(rtc_file, "w");
+	if (!fp) {
+		logit(LOG_WARNING, "Failed saving system clock to %s, code %d: %s",
+		      rtc_file, errno, strerror(errno));
+		return;
+	}
+
+	if ((rc = time_get(&tm))) {
+		logit(LOG_WARNING, "System clock invalid, before %s, not saving", rtc_timestamp);
+		print_desc(NULL, "System clock invalid, skipping");
+	} else {
+		char buf[32] = { 0 };
+
+		print_desc(NULL, "Saving system clock to file");
+		strftime(buf, sizeof(buf), RTC_FMT, &tm);
+		fprintf(fp, "%s\n", buf);
+	}
+
+	print(rc, NULL);
+	fclose(fp);
+}
+
+static void file_restore(void *arg)
+{
+	struct tm tm = { 0 };
+	int rc = 1;
+	FILE *fp;
+
+	if (!rtc_file) {
+		logit(LOG_NOTICE, "System has no RTC (missing driver?), skipping restore.");
+		return;
+	}
+
+	print_desc(NULL, "Restoring system clock from backup");
+
+	fp = fopen(rtc_file, "r");
+	if (fp) {
+		char buf[32];
+
+		if (fgets(buf, sizeof(buf), fp)) {
+			chomp(buf);
+			strptime(buf, RTC_FMT, &tm);
+			rc = time_set(&tm);
+		}
+		fclose(fp);
+	} else
+		logit(LOG_WARNING, "Missing %s", rtc_file);
+
+	if (rc) {
+		time_set(NULL);
+		rc = 2;
+	}
+
+	print(rc, NULL);
+}
+
 static int rtc_open(void)
 {
 	char *alt[] = {
@@ -91,10 +221,8 @@ static int rtc_open(void)

 static void rtc_save(void *arg)
 {
-	struct timeval tv = { 0 };
 	struct tm tm = { 0 };
 	int fd, rc = 0;
-	char tz[128];

 	if (rescue) {
 		dbg("Skipping %s plugin in rescue mode.", __FILE__);
@@ -105,38 +233,26 @@ static void rtc_save(void *arg)
 	if (fd < 0)
 		return;

-	tz_set(tz, sizeof(tz));
-	rc = gettimeofday(&tv, NULL);
-	if (rc < 0 || tv.tv_sec < rtc_date_fallback) {
+	if ((rc = time_get(&tm))) {
 		print_desc(NULL, "System clock invalid, not saving to RTC");
-	invalid:
-		logit(LOG_ERR, "System clock invalid, before %s, not saving to RTC", rtc_timestamp);
+	} else {
+		print_desc(NULL, "Saving system clock (UTC) to RTC");
+		rc = ioctl(fd, RTC_SET_TIME, &tm);
+	}
+
+	if (rc && errno == EINVAL) {
+		logit(LOG_WARNING, "System clock invalid, before %s, not saving to RTC", rtc_timestamp);
 		rc = 2;
-		goto out;
 	}

-	print_desc(NULL, "Saving system time (UTC) to RTC");
-
-	gmtime_r(&tv.tv_sec, &tm);
-	if (ioctl(fd, RTC_SET_TIME, &tm) < 0) {
-		if (EINVAL == errno)
-			goto invalid;
-		rc = 1;
-		goto out;
-	}
-
-out:
-	tz_restore(tz);
 	print(rc, NULL);
 	close(fd);
 }

 static void rtc_restore(void *arg)
 {
-	struct timeval tv = { 0 };
 	struct tm tm = { 0 };
 	int fd, rc = 0;
-	char tz[128];

 	if (rescue) {
 		dbg("Skipping %s plugin in rescue mode.", __FILE__);
@@ -145,65 +261,62 @@ static void rtc_restore(void *arg)

 	fd = rtc_open();
 	if (fd < 0) {
-		logit(LOG_NOTICE, "System has no RTC (missing driver?), skipping restore.");
+		file_restore(arg);
 		return;
 	}

-	tz_set(tz, sizeof(tz));
-	if (ioctl(fd, RTC_RD_TIME, &tm) < 0) {
+	if ((rc = ioctl(fd, RTC_RD_TIME, &tm)) < 0) {
 		char msg[120];

 		snprintf(msg, sizeof(msg), "Failed restoring system clock, %s",
 			 EINVAL == errno ? "RTC time is too old"   :
 			 ENOENT == errno ? "RTC has no saved time" : "see log for details");
 		print_desc(NULL, msg);
+	} else {
+		print_desc(NULL, "Restoring system clock (UTC) from RTC");
+		rc = time_set(&tm);
+	}

-	invalid:
-		logit(LOG_ERR, "Failed restoring system clock from RTC.");
+	if (rc) {
+		logit(LOG_WARNING, "Failed restoring system clock from RTC.");
 		if (EINVAL == errno)
-			logit(LOG_ERR, "RTC time is too old (before %s)", rtc_timestamp);
+			logit(LOG_WARNING, "RTC time is too old (before %s)", rtc_timestamp);
 		else if (ENOENT == errno)
-			logit(LOG_ERR, "RTC has no previously saved (valid) time.");
+			logit(LOG_WARNING, "RTC has no previously saved (valid) time.");
 		else
-			logit(LOG_ERR, "RTC error code %d: %s", errno, strerror(errno));
+			logit(LOG_WARNING, "RTC error code %d: %s", errno, strerror(errno));

-		/* Been here already? */
-		if (rc)
-			goto out;
+		print(2, NULL);

-		/* Attempt to set RTC to a sane value ... */
-		tv.tv_sec = rtc_date_fallback;
-		if (!gmtime_r(&tv.tv_sec, &tm))
-			goto out;
+		/* Try restoring from last save game */
+		if (rtc_file)
+			file_restore(arg);
+	} else
+		print(0, NULL);

-		logit(LOG_NOTICE, "Resetting RTC to kernel default, %s.", rtc_timestamp);
-		rc = 2;
-	}
-
-	print_desc(NULL, "Restoring system clock (UTC) from RTC");
-	tm.tm_isdst = -1; /* Use tzdata to figure it out, please. */
-	tv.tv_sec = mktime(&tm);
-	if (tv.tv_sec == (time_t)-1 || tv.tv_sec < rtc_date_fallback) {
-		errno = EINVAL;
-		goto invalid;
-	}
-
-	if (settimeofday(&tv, NULL) == -1)
-		rc = 1;
-
-out:
-	tz_restore(tz);
-	print(rc, NULL);
 	close(fd);
 }

+
+static void save(void *arg)
+{
+	rtc_save(arg);
+	file_save(arg);
+}
+
+static void update(uev_t *w, void *arg, int events)
+{
+	save(arg);
+}
+
+
 static plugin_t plugin = {
 	.name = __FILE__,
 	.hook[HOOK_BASEFS_UP] = {
 		.cb  = rtc_restore
 	},
 	.hook[HOOK_SHUTDOWN] = {
-		.cb  = rtc_save
+		.cb  = save
 	}
 };

@@ -211,16 +324,21 @@ PLUGIN_INIT(plugin_init)
 {
 	struct tm tm = { 0 };

-	if (!strptime(rtc_timestamp, "%Y-%m-%d %H:%M", &tm))
-		rtc_date_fallback = mktime(&tm);
-	else
+	if (!strptime(rtc_timestamp, RTC_FMT, &tm)) {
+		logit(LOG_WARNING, "Invalid restore date '%s', reverting to '%s'",
+		      rtc_timestamp, RTC_TIMESTAMP_BEGIN_2000);
 		rtc_timestamp = RTC_TIMESTAMP_BEGIN_2000;
+	} else
+		rtc_date_fallback = mktime(&tm);
+
+	uev_timer_init(ctx, &rtc_timer, update, NULL, RTC_PERIOD, RTC_PERIOD);

 	plugin_register(&plugin);
 }

 PLUGIN_EXIT(plugin_exit)
 {
+	uev_timer_stop(&rtc_timer);
 	plugin_unregister(&plugin);
 }

@@ -1,6 +1,6 @@
 /* System condition event monitor for the Finit condition engine
 *
- * Copyright (c) 2021-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2021-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,7 +1,7 @@
 /* Optional TTY Watcher, used to catch new TTYs that are discovered, e.g., USB
 *
 * Copyright (c) 2013  Mattias Walström <lazzer@gmail.com>
- * Copyright (c) 2013-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2013-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Setup and save random seed at boot/shutdown
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -26,6 +26,7 @@
 #include <sys/stat.h>
 #include <sys/time.h>		/* gettimeofday() */
 #include <sys/types.h>
+#include <sys/resource.h>	/* getrusage() */
 #ifdef _LIBITE_LITE
 # include <libite/lite.h>
 #else
@@ -42,11 +43,43 @@
 #define RANDOM_BYTES (32*1024)
 #endif

+#ifdef RANDOMSEED
+/*
+ * This is the fallback seed function, please make sure you have drivers
+ * enabling /dev/hwrng instead.
+ */
+static void fallback(FILE *fp)
+{
+	unsigned long seed;
+	struct timeval tv;
+	struct rusage ru;
+	int iter = 128;
+
+	gettimeofday(&tv, NULL);
+	getrusage(RUSAGE_SELF, &ru);
+
+	/* Mix multiple sources of "randomness" */
+	seed = tv.tv_sec ^ (tv.tv_usec << 16);
+	seed ^= ru.ru_utime.tv_sec ^ (ru.ru_utime.tv_usec << 16);
+	seed ^= ru.ru_stime.tv_sec ^ (ru.ru_stime.tv_usec << 16);
+	seed ^= getpid() << 8;
+
+	srandom(seed);
+	while (iter--) {
+		uint32_t i, prng = random();
+
+		for (i = 0; i < sizeof(prng); i++)
+			fputc((prng >> (i * CHAR_BIT)) & UCHAR_MAX, fp);
+	}
+}
+#endif
+
 static void setup(void *arg)
 {
 #ifdef RANDOMSEED
 	struct rand_pool_info *rpi;
 	ssize_t len = 0;
+	struct stat st;
 	int rc = -1;
 	int fd, err;

@@ -55,7 +88,7 @@ static void setup(void *arg)
 		return;
 	}

-	if (!fexist(RANDOMSEED)) {
+	if (stat(RANDOMSEED, &st) || st.st_size < 512) {
 		int ret = 1;
 		mode_t prev;
 		FILE *fp;
@@ -64,16 +97,22 @@ static void setup(void *arg)
 		prev = umask(077);
 		fp = fopen(RANDOMSEED, "w");
 		if (fp) {
-			int iter = 128;
-			struct timeval tv;
+			const char *hwrng = "/dev/hwrng";
+			FILE *hw;

-			gettimeofday(&tv, NULL);
-			srandom(tv.tv_sec % 3600);
-			while (iter--) {
-				uint32_t i, prng = random();
+			hw = fopen(hwrng, "r");
+			if (hw) {
+				char buf[512];
+				size_t len;

-				for (i = 0; i < sizeof(prng); i++)
-					fputc((prng >> (i * CHAR_BIT)) & UCHAR_MAX, fp);
+				len = fread(buf, sizeof(buf[0]), sizeof(buf), hw);
+				if (len == 0)
+					fallback(fp);
+				else
+					len = fwrite(buf, sizeof(buf[0]), len, fp);
+				fclose(hw);
+			} else {
+				fallback(fp);
 			}
 			ret = fclose(fp);
 		}
@@ -130,7 +169,7 @@ static void setup(void *arg)
 	close(fd);
 	free(rpi);
 	if (rc < 0)
-		logit(LOG_ERR, "Failed adding entropy to kernel random pool: %s", strerror(err));
+		logit(LOG_WARNING, "Failed adding entropy to kernel random pool: %s", strerror(err));
 	print_result(rc < 0);
 	return;
 fallback:
@@ -1,6 +1,6 @@
 /* User-defined condition event monitor for the Finit condition engine
 *
- * Copyright (c) 2021-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2021-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Console setup (for X)
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -19,6 +19,8 @@ if WATCHDOGD
 pkglibexec_PROGRAMS += watchdogd
 endif

+dist_pkglibexec_SCRIPTS = coldplug
+
 finit_pkglibdir      = $(pkglibdir)
 finit_pkglib_SCRIPTS = rescue.conf sample.conf

@@ -1,6 +1,6 @@
 /* External client API, using UNIX domain socket.
 *
- * Copyright (c) 2015-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2015-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -332,6 +332,11 @@ static void api_cb(uev_t *w, void *arg, int events)
 	int sd, lvl;
 	svc_t *svc;

+	if (UEV_ERROR == events) {
+		dbg("%s(): api socket %d invalid.", __func__, w->fd);
+		goto error;
+	}
+
 	sd = accept(w->fd, NULL, NULL);
 	if (sd < 0) {
 		err(1, "Failed serving API request");
@@ -377,7 +382,9 @@ static void api_cb(uev_t *w, void *arg, int events)
 		case INIT_CMD_POWEROFF:
 		case INIT_CMD_SUSPEND:
 			if (IS_RESERVED_RUNLEVEL(runlevel)) {
-				warnx("Unsupported command in runlevel S and 6/0.");
+				strterm(rq.data, sizeof(rq.data));
+				warnx("Unsupported command (cmd: %d, data: %s) in runlevel S and 6/0.",
+				      rq.cmd, rq.data);
 				goto leave;
 			}
 		default:
@@ -555,7 +562,7 @@ static void api_cb(uev_t *w, void *arg, int events)
 			}

 			if (uev_io_init(ctx, &svc->notify_watcher, service_notify_cb, svc, sd, UEV_READ)) {
-				err(1, "Falied initializing %s readiness notifier", svc_ident(svc, NULL, 0));
+				err(1, "Failed initializing %s readiness notifier", svc_ident(svc, NULL, 0));
 				break;
 			}
 			return;	/* Don't close sd, used for notify */
@@ -576,8 +583,6 @@ static void api_cb(uev_t *w, void *arg, int events)

 leave:
 	close(sd);
-	if (UEV_ERROR == events)
-		goto error;
 	return;
 error:
 	api_exit();
@@ -1,6 +1,6 @@
 /* Finit control group support functions
 *
- * Copyright (c) 2019-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2019-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -259,6 +259,11 @@ static void cgroup_events_cb(uev_t *w, void *arg, int events)
 	ssize_t sz;
 	size_t off;

+	if (UEV_ERROR == events) {
+		dbg("%s(): inotify socket %d invalid.", __func__, w->fd);
+		return;
+	}
+
 	sz = read(w->fd, ev_buf, sizeof(ev_buf) - 1);
 	if (sz <= 0) {
 		err(1, "invalid inotify event");
@@ -463,10 +468,15 @@ void cgroup_init(uev_ctx_t *ctx)
 	FILE *fp;
 	int fd;

+#ifndef CGROUP2_ENABLED
+	avail = 0;
+	return;
+#endif
+
 	if (mount("none", FINIT_CGPATH, "cgroup2", opts, NULL)) {
 		if (errno == ENOENT)
 			logit(LOG_INFO, "Kernel does not support cgroups v2, disabling.");
-		else if (errno == EPERM) /* Probably inside an unpriviliged container */
+		else if (errno == EPERM) /* Probably inside an unprivileged container */
 			logit(LOG_INFO, "Not allowed to mount cgroups v2, disabling.");
 		else
 			err(1, "Failed mounting cgroup v2");
@@ -1,6 +1,6 @@
 /* Finit control group support functions
 *
- * Copyright (c) 2019-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2019-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* New client tool, replaces old /dev/initctl API and telinit tool
 *
- * Copyright (c) 2019-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2019-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Cgroup utility functions for initctl
 *
- * Copyright (c) 2019-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2019-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* External client API, using UNIX domain socket.
 *
- * Copyright (c) 2015-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2015-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -29,6 +29,8 @@
 #include "client.h"
 #include "log.h"

+#define REQUEST_TIMEOUT 15000
+
 static int sd = -1;

 int client_connect(void)
@@ -85,7 +87,7 @@ int client_request(struct init_request *rq, ssize_t len)

 	pfd.fd     = sd;
 	pfd.events = POLLOUT;
-	if (poll(&pfd, 1, 2000) <= 0) {
+	if (poll(&pfd, 1, REQUEST_TIMEOUT) <= 0) {
 		warn("Timed out waiting for Finit, errno %d", errno);
 		return -1;
 	}
@@ -107,7 +109,7 @@ int client_request(struct init_request *rq, ssize_t len)

 	pfd.fd = sd;
 	pfd.events = POLLIN | POLLERR | POLLHUP;
-	if ((rc = poll(&pfd, 1, 2000)) <= 0) {
+	if ((rc = poll(&pfd, 1, REQUEST_TIMEOUT)) <= 0) {
 		if (rc) {
 			if (errno == EINTR) /* shutdown/reboot */
 				return -1;
@@ -1,6 +1,6 @@
 /* External client API, using UNIX domain socket.
 *
- * Copyright (c) 2015-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2015-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# With the daemon mode ('mdev -df') we no longer need the hotplug helper
+echo "" > /proc/sys/kernel/hotplug
+
+# Wait for 'mdev -df' to set up its event queue.
+sleep 1
+
+# Trigger 'add' event for all devices and subsystems to load all modules
+# and any firmware needed by the hardware.
+find /sys/devices -name uevent -print | while IFS='' read X; do echo add > $X; done
@@ -35,6 +35,7 @@
 #include "cond.h"
 #include "pid.h"
 #include "service.h"
+#include "sm.h"

 struct cond_boot {
 	TAILQ_ENTRY(cond_boot) link;
@@ -112,7 +113,7 @@ static void cond_boot_strap(void)
 *
 *    => 'pid/' + 'teamd' + '' = condition <pid/teamd>
 *
- * When you add a second aggrate you need to tell Finit it's a different
+ * When you add a second aggregate you need to tell Finit it's a different
 * instance usugin the :ID syntax:
 *
 *    service :lag2 teamd -f /etc/teamd/lag2.conf -- Aggregate lag2
@@ -214,7 +215,10 @@ static int do_delete(const char *fpath, const struct stat *sb, int tflag, struct
 		err(1, "Failed removing condition %s", fpath);

 	cond = ptr + strlen(COND_BASE) + 1;
-	cond_update(cond);
+	if (sm_is_in_teardown(&sm))
+		cond_clear_noupdate(cond);
+	else
+		cond_update(cond);

 	return 0;
 }
@@ -222,8 +226,16 @@ static int do_delete(const char *fpath, const struct stat *sb, int tflag, struct
 static void cond_delpath(const char *path)
 {
 	nftw(path, do_delete, 20, FTW_DEPTH);
-	if (remove(path) && errno != ENOENT)
-		err(1, "Failed removing condition path %s", path);
+	if (remove(path)) {
+		switch (errno) {
+		case ENOENT:	/* Ignore */
+		case ENOTEMPTY:	/* Only at shutdown and for directories */
+			break;
+		default:
+			err(1, "Failed removing condition path %s", path);
+			break;
+		}
+	}
 }

 int cond_set_path(const char *path, enum cond_state next)
@@ -276,7 +288,7 @@ int cond_update(const char *name)
 	svc_t *svc, *iter = NULL;
 	int affects = 0;

-	dbg("%s", name);
+//	dbg("%s", name);
 	for (svc = svc_iterator(&iter, 1); svc; svc = svc_iterator(&iter, 0)) {
 		if (!svc_has_cond(svc) || !cond_affects(name, svc->cond))
 			continue;
@@ -309,7 +321,7 @@ int cond_set_noupdate(const char *name)

 void cond_set(const char *name)
 {
-	dbg("%s", name);
+//	dbg("%s", name);
 	if (cond_set_noupdate(name))
 		return;

@@ -360,7 +372,7 @@ int cond_clear_noupdate(const char *name)

 void cond_clear(const char *name)
 {
-	dbg("%s", name);
+//	dbg("%s", name);
 	if (cond_clear_noupdate(name))
 		return;

@@ -1,6 +1,6 @@
 /* Parser for /etc/finit.conf and /etc/finit.d/<SVC>.conf
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -348,8 +348,11 @@ static void parse_kernel_loglevel(void)
 */
 void conf_parse_cmdline(int argc, char *argv[])
 {
+	const char *ptr;
+
 	/* Set up defaults */
-	fstab      = strdup(FINIT_FSTAB);
+	if ((ptr = FINIT_FSTAB))
+		fstab = strdup(ptr);
 	finit_conf = strdup(FINIT_CONF);
 	finit_rcsd = strdup(FINIT_RCSD);
 	path       = getenv("PATH");
@@ -414,6 +417,79 @@ void conf_saverc(void)
 	fclose(fp);
 }

+/*
+ * Called at bootstrap to log execution order (for debug)
+ */
+void conf_save_exec_order(svc_t *svc, char *cmdline, int result)
+{
+	const char *fn = _PATH_VARRUN "finit/exec.order";
+	const char *ststr = !result ? "[ OK ]" : "[FAIL]";
+	static char *prepared = NULL;
+	int first = !fexist(fn);
+	FILE *fp;
+
+	fp = fopen(fn, "a+");
+	if (!fp) {
+		err(1, "failed writing to %s", fn);
+		return;
+	}
+
+	if (first) {
+		fprintf(fp, "# Execution order of run/task/services at bootstrap\n");
+		fprintf(fp, "# ST    TYPE     COMMAND LINE (DESC)\n");
+	}
+
+	if (result == -1) {
+		int len;
+
+		len = snprintf(NULL, 0, "        %-7s  %-64s (%s)", svc_typestr(svc), cmdline, svc->desc);
+		if (len > 0) {
+			if (prepared)
+				free(prepared);
+			prepared = malloc(++len);
+			if (!prepared)
+				goto done;
+			snprintf(prepared, len, "        %-7s  %-64s (%s)", svc_typestr(svc), cmdline, svc->desc);
+		}
+	} else {
+		if (prepared) {
+			memcpy(prepared, ststr, strlen(ststr));
+			fprintf(fp, "%s\n", prepared);
+			free(prepared);
+			prepared = NULL;
+		} else {
+			fprintf(fp, "%s  %-7s  %-64s (%s)\n", ststr, svc_typestr(svc), cmdline, svc->desc);
+		}
+	}
+done:
+	fclose(fp);
+}
+
+/*
+ * Called by plugins and similar that dynamically generate system services
+ */
+void conf_save_service(int type, char *cfg, char *file)
+{
+	char fn[256];
+	svc_t foo;
+	FILE *fp;
+
+	mkpath(FINIT_RUNPATH_, 0755);
+	snprintf(fn, sizeof(fn), "%s/%s", FINIT_RUNPATH_, file);
+	if (fexist(fn))
+		warnx("File %s already exists, overwriting.", fn);
+	fp = fopen(fn, "w");
+	if (!fp) {
+		err(1, "Failed creating %s", fn);
+		return;
+	}
+
+	foo.type = type;
+	fprintf(fp, "# Generated by finit:%s()\n", __func__);
+	fprintf(fp, "%s %s\n", svc_typestr(&foo), cfg);
+	fclose(fp);
+}
+
 /*
 * Sets, and makes a note of, all KEY=VALUE lines in a given .conf line
 * from finit.conf, or other .conf file.  Note, PATH is always reset in
@@ -472,6 +548,23 @@ static void parse_env(char *line)
 			*end-- = 0;
 	}

+	/* strip any leading 'set ' */
+	end = key;
+	if (!strncmp(key, "set", 3))
+		end += 3;
+
+	/* check key, no spaces allowed */
+	while (*end && isspace(*end))
+		end++;
+	key = end;
+	while (*end && !isspace(*end))
+		end++;
+	if (*end != 0) {
+		warnx("'%s=%s': not a valid identifier", key, val);
+		return;	/* invalid key */
+	}
+
+	dbg("Global env '%s'='%s'", key, val);
 	setenv(key, val, 1);

 	node = malloc(sizeof(*node));
@@ -583,11 +676,22 @@ void conf_parse_cond(svc_t *svc, char *cond)
 		return;
 	}

-	/* First character must be '!' if SIGHUP is not supported. */
+	/*
+	 * First character must be '!' if:
+	 *   - service:  SIGHUP is not supported
+	 *   - run/task: Do not block bootstrap
+	 */
 	ptr = cond;
 	if (ptr[i] == '!') {
-		svc->sighup = 0;
 		ptr++;
+
+		if (svc_is_runtask(svc)) {
+			/* see service_runtask_clean() */
+			svc->sighup = 1;
+			svc->once = 1;
+		} else {
+			svc->sighup = 0;
+		}
 	}

 	while (ptr[i] != '>' && ptr[i] != 0)
@@ -874,6 +978,18 @@ static int parse_static(char *line, int is_rcsd)
 		return 0;
 	}

+	/*
+	 * Before Finit 5 the default readiness notification is PID.
+	 * This default can be changed by setting 'readiness none' in
+	 * the file /etc/finit.conf, only read once at bootstrap.
+	 */
+	if (BOOTSTRAP && MATCH_CMD(line, "readiness ", x)) {
+		char *token = strip_line(x);
+
+		if (!strcmp(token, "none"))
+			readiness = SVC_NOTIFY_NONE;
+	}
+
 	if (MATCH_CMD(line, "reboot-delay ", x)) {
 		syncsec = strtonum(strip_line(x), 0, 60, NULL);
 		return 0;
@@ -1152,22 +1268,53 @@ int conf_reload(void)
 	 * but are now regular files that can be overridden by files in
 	 * /etc/finit.d -- similar to how tmfiles.d(5) work.  E.g., add
 	 * an override .conf, or an ignore by symlinking to /dev/null
+	 *
+	 * The .conf files (and run/task/service stanzas) are parsed and
+	 * started in order.  Each directory is sorted alphanumerically
+	 * and then the result is appended to the overall order:
+	 *
+	 *     /lib/finit/system/10-hotplug.conf
+	 *     /lib/finit/system/90-testserv.conf
+	 *     /run/finit/system/dbus.conf
+	 *     /run/finit/system/tty.conf
+	 *     /etc/finit.d/10-abc.conf
+	 *     /etc/finit.d/20-abc.conf
+	 *     /etc/finit.d/enabled/1-aaa.conf
+	 *     /etc/finit.d/enabled/1-abc.conf
+	 *     /etc/finit.d/enabled/2-aaa.conf
 	 */
-	glob_append(&gl, 0, "%s/*.conf", finit_rcsd);
-	glob_append(&gl, 1, "%s/*.conf", FINIT_SYSPATH);
+	glob_append(&gl, 0, "%s/*.conf", FINIT_SYSPATH_);
+	glob_append(&gl, 1, "%s/*.conf", FINIT_RUNPATH_);
+	glob_append(&gl, 1, "%s/*.conf", finit_rcsd);
 	glob_append(&gl, 1, "%s/enabled/*.conf", finit_rcsd);

+	if (bootstrap) {
+		const char *fn = _PATH_VARRUN "finit/conf.order";
+		FILE *fp;
+
+		fp = fopen(fn, "w");
+		if (!fp) {
+			err(1, "failed creating %s", fn);
+		} else {
+			fprintf(fp, "# Evaluation & execution order of .conf files\n");
+			for (i = 0; i < gl.gl_pathc; i++)
+				fprintf(fp, "%s\n", gl.gl_pathv[i]);
+			fclose(fp);
+		}
+	}
+
 	for (i = 0; i < gl.gl_pathc; i++) {
 		char *path = gl.gl_pathv[i];
 		char *rp = NULL;
 		struct stat st;
 		size_t j, len;

-		/* check for FINIT_SYSPATH overrides */
+		/* check for FINIT_SYSPATH_ or FINIT_RUNPATH_ overrides */
 		for (j = i + 1; j < gl.gl_pathc; j++) {
-			if (strncmp(path, FINIT_SYSPATH, strlen(FINIT_SYSPATH)))
+			if (strncmp(path, FINIT_SYSPATH_, strlen(FINIT_SYSPATH_)) &&
+			    strncmp(path, FINIT_RUNPATH_, strlen(FINIT_RUNPATH_)))
 				continue;
-			if (strcmp(basename(path), basename(gl.gl_pathv[j])))
+			if (strcmp(basenm(path), basenm(gl.gl_pathv[j])))
 				continue;
 			path = NULL; /* replacement later in list, skip this */
 			break;
@@ -1225,6 +1372,9 @@ done:
 	/* Drop record of all .conf changes */
 	drop_changes();

+	if (bootstrap)
+		wdog = svc_find("watchdog", "finit");
+
 	/* Override configured runlevel, user said 'S' on /proc/cmdline */
 	if (BOOTSTRAP && single)
 		cfglevel = 1;
@@ -1275,22 +1425,29 @@ static int conf_change_act(char *dir, char *name, uint32_t mask)
 	struct conf_change *node;
 	char *rp = NULL;

-	if (name[0])
+	/* Check for actual printable characters, sometimes STX */
+	if (name[0] && name[0] >= ' ')
 		paste(fn, sizeof(fn), dir, name);
 	else
 		strlcpy(fn, dir, sizeof(fn));
 	dbg("path: %s mask: %08x", fn, mask);

-	/* Handle disabling/removal of service */
-	rp = realpath(fn, NULL);
-	if (!rp) {
-		if (errno != ENOENT)
-			goto fail;
+	if (strchr(name, '@')) {
+		/* Skip realpath for templates */
 		rp = strdup(fn);
-		if (!rp)
-			goto fail;
+	} else {
+		/* Handle disabling/removal of service */
+		rp = realpath(fn, NULL);
+		if (!rp) {
+			if (errno != ENOENT)
+				goto fail;
+			rp = strdup(fn);
+		}
 	}

+	if (!rp)
+		goto fail;
+
 	node = conf_find(rp);
 	if (node) {
 		dbg("event already registered for %s ...", name);
@@ -1329,7 +1486,11 @@ int conf_changed(char *file)
 	if (!file)
 		return 0;

-	rp = realpath(file, NULL);
+	if (strchr(file, '@'))
+		rp = strdup(file);
+	else
+		rp = realpath(file, NULL);
+
 	if (!rp)
 		return 0;

@@ -1381,6 +1542,11 @@ static int conf_iwatch_read(int fd)

 static void conf_cb(uev_t *w, void *arg, int events)
 {
+	if (UEV_ERROR == events) {
+		dbg("%s(): iwatch socket %d invalid.", __func__, w->fd);
+		return;
+	}
+
 	if (conf_iwatch_read(w->fd)) {
 		err(1, "invalid inotify event");
 		return;
@@ -1413,25 +1579,26 @@ int conf_monitor(void)
 	 * have or not have symlinks in place.  We need to monitor for
 	 * changes to either symlink or target.
 	 */
-	rc += iwatch_add(&iw_conf, finit_rcsd, IN_ONLYDIR);
+	rc |= iwatch_add(&iw_conf, finit_rcsd, IN_ONLYDIR);
 	snprintf(path, sizeof(path), "%s/available/", finit_rcsd);
-	rc += iwatch_add(&iw_conf, path, IN_ONLYDIR | IN_DONT_FOLLOW);
+	rc |= iwatch_add(&iw_conf, path, IN_ONLYDIR | IN_DONT_FOLLOW);
 	snprintf(path, sizeof(path), "%s/enabled/", finit_rcsd);
-	rc += iwatch_add(&iw_conf, path, IN_ONLYDIR | IN_DONT_FOLLOW);
-	rc += iwatch_add(&iw_conf, finit_conf, 0);
+	rc |= iwatch_add(&iw_conf, path, IN_ONLYDIR | IN_DONT_FOLLOW);
+	rc |= iwatch_add(&iw_conf, finit_conf, 0);

 	/*
 	 * Systems with /etc/default, /etc/conf.d, or similar, can also
 	 * monitor changes in env files sourced by .conf files (above)
 	 * define your own with --with-sysconfig=/path/to/envfiles
 	 */
-	rc += iwatch_add(&iw_conf, "/etc/default/", IN_ONLYDIR);
-	rc += iwatch_add(&iw_conf, "/etc/conf.d/", IN_ONLYDIR);
+	rc |= iwatch_add(&iw_conf, "/etc/default/", IN_ONLYDIR);
+	rc |= iwatch_add(&iw_conf, "/etc/conf.d/", IN_ONLYDIR);
 #ifdef FINIT_SYSCONFIG
-	rc += iwatch_add(&iw_conf, FINIT_SYSCONFIG, IN_ONLYDIR);
+	rc |= iwatch_add(&iw_conf, FINIT_SYSCONFIG, IN_ONLYDIR);
 #endif
+	rc |= conf_reload();

-	return rc + conf_reload();
+	return rc;
 }

 /*
@@ -1461,15 +1628,16 @@ int conf_init(uev_ctx_t *ctx)
 	 */
 #ifdef WDT_DEVNODE
 	if (whichp(FINIT_EXECPATH_ "/watchdogd") && fexist(WDT_DEVNODE)) {
-		service_register(SVC_TYPE_SERVICE, "[S0123456789] cgroup.init name:watchdog :finit " FINIT_EXECPATH_ "/watchdogd -- Finit watchdog daemon", global_rlimit, NULL);
-		wdog = svc_find("watchdog", "finit");
+		conf_save_service(SVC_TYPE_SERVICE, "[S0123456789] cgroup.init notify:none name:watchdog :finit "
+				  FINIT_EXECPATH_ "/watchdogd -- Finit watchdog daemon", "watchdogd.conf");
 	}
 #endif
 	/*
 	 * Start kernel event daemon as soon as possible, if enabled
 	 */
 	if (whichp(FINIT_EXECPATH_ "/keventd"))
-		service_register(SVC_TYPE_SERVICE, "[S0123456789] cgroup.init " FINIT_EXECPATH_ "/keventd -- Finit kernel event daemon", global_rlimit, NULL);
+		conf_save_service(SVC_TYPE_SERVICE, "[S12345789] cgroup.init notify:none "
+				  FINIT_EXECPATH_ "/keventd -- Finit kernel event daemon", "keventd.conf");

 	dbg("Allow plugins to register early runlevel 1 run/task/services ...");
 	plugin_run_hooks(HOOK_SVC_PLUGIN);
@@ -1502,10 +1670,10 @@ int conf_init(uev_ctx_t *ctx)
 		if (runparts_sysv)
 			strlcat(args, "-s ", sizeof(args));

-		snprintf(conf, sizeof(conf), "[S] <int/bootstrap> log:console %s %s %s"
+		snprintf(conf, sizeof(conf), "[S] <int/bootstrap> notify:none log:console %s %s %s"
 			 " -- Calling runparts %s in the background",
 			 _PATH_RUNPARTS, args, runparts, runparts);
-		service_register(SVC_TYPE_TASK, conf, global_rlimit, NULL);
+		conf_save_service(SVC_TYPE_TASK, conf, "runparts.conf");
 	}

 	return 0;
@@ -1,6 +1,6 @@
 /* Parser for /etc/finit.conf and /etc/finit.d/<SVC>.conf
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -44,6 +44,8 @@ int  conf_monitor         (void);

 void conf_reset_env       (void);
 void conf_saverc          (void);
+void conf_save_exec_order (svc_t *svc, char *cmdline, int result);
+void conf_save_service    (int type, char *cfg, char *file);
 void conf_parse_cmdline   (int argc, char *argv[]);
 int  conf_parse_runlevels (char *runlevels);
 void conf_parse_cond      (svc_t *svc, char *cond);
@@ -1,6 +1,6 @@
 /* Device node monitor for the Finit condition engine
 *
- * Copyright (c) 2022-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2022-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Device node monitor for the Finit condition engine
 *
- * Copyright (c) 2022-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2022-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,7 +1,7 @@
 /* Functions for exec'ing processes
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -138,31 +138,32 @@ int run(char *cmd, char *log)

 	pid = fork();
 	if (0 == pid) {
-		int rc = EX_OSERR;
+		char *pfx, buf[256];
+		FILE *pp;
+		int rc;

 		setsid();
 		sig_unblock();
 		if (!log) {
 			do_redirect();
 			execvp(args[0], args);
-		} else {
-			char *pfx = *log ? ": " : "";
-			FILE *pp;
-
-			pp = popen(cmd, "r");
-			if (pp) {
-				char buf[256];
-
-				while (fgets(buf, sizeof(buf), pp)) {
-					chomp(buf);
-					logit(LOG_NOTICE, "%s%s%s", log, pfx, buf);
-				}
-
-				rc = pclose(pp);
-			}
+			_exit(EX_OSERR);
 		}

-		_exit(rc);
+		pp = popen(cmd, "r");
+		if (!pp)
+			_exit(EX_OSERR);
+
+		pfx = *log ? ": " : "";
+		while (fgets(buf, sizeof(buf), pp)) {
+			chomp(buf);
+			logit(LOG_NOTICE, "%s%s%s", log, pfx, buf);
+		}
+
+		rc = pclose(pp);
+		if (rc == -1)
+			_exit(EX_OSERR);
+		_exit(WEXITSTATUS(rc));
 	} else if (-1 == pid) {
 		err(1, "%s", !log ? args[0] : cmd);
 		if (backup)
@@ -198,7 +199,6 @@ int run(char *cmd, char *log)
 int run_interactive(char *cmd, char *fmt, ...)
 {
 	int status, oldout = 1, olderr = 2;
-	char line[LINE_SIZE];
 	FILE *fp;

 	if (!cmd) {
@@ -243,6 +243,7 @@ int run_interactive(char *cmd, char *fmt, ...)

 	/* Dump any results of cmd on stderr after we've printed [ OK ] or [FAIL]  */
 	if (fp && !debug) {
+		char line[LINE_SIZE];
 		size_t len, written;

 		rewind(fp);
@@ -280,7 +281,7 @@ int exec_runtask(char *cmd, char *args[])
 	return execvp(_PATH_BSHELL, argv);
 }

-static void prepare_tty(char *tty, speed_t speed, char *procname, struct rlimit rlimit[])
+static void prepare_tty(char *tty, speed_t speed, const char *procname, struct rlimit rlimit[])
 {
 	char name[80];
 	int fd, dummy;
@@ -350,7 +351,7 @@ static int activate_console(int noclear, int nowait)
 	dprint(STDERR_FILENO, clr, strlen(clr));
 	dprint(STDERR_FILENO, msg, strlen(msg));
 	while ((rc = read(STDIN_FILENO, &ch, 1)) > 0 && ch != '\r' && ch != '\n')
-		continue;
+		;

 	/* On any error (likely EINTR), we avoid starting getty */
 	if (rc == -1)
@@ -1,7 +1,7 @@
 /* Finit - Fast /sbin/init replacement w/ I/O, hook & service plugins
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -66,9 +66,10 @@ int   prevlevel = -1;
 int   debug     = 0;		/* debug mode from kernel cmdline */
 int   rescue    = 0;		/* rescue mode from kernel cmdline */
 int   single    = 0;		/* single user mode from kernel cmdline */
-int   bootstrap = 1;		/* set while bootrapping (for TTYs) */
+int   bootstrap = 1;		/* set while bootstrapping (for TTYs) */
 int   kerndebug = 0;		/* set if /proc/sys/kernel/printk > 7 */
 int   syncsec   = 0;		/* reboot delay */
+int   readiness = SVC_NOTIFY_PID;
 char *finit_conf= NULL;
 char *finit_rcsd= NULL;
 char *fstab     = NULL;
@@ -86,14 +87,22 @@ svc_t *wdog     = NULL;		/* No watchdog by default */
 */
 static void banner(void)
 {
+#ifndef KERNEL_LOGGING
 	/*
 	 * Silence kernel logs, assuming users have sysklogd or
-	 * similar enabled to start emptying /dev/kmsg, but for
-	 * our progress we want to own the console.
+	 * similar enabled to start emptying /dev/kmsg.
+	 *
+	 * Instead of using `configure --disable-kernel-logging`, we
+	 * recommend adjusting the kernel log level in the kernel's
+	 * menuconfig, or using sysctl kernel.printk, or setting the
+	 * desired log level, on the kernel cmdline, e.g. 'quiet'.
+	 *
+	 * By default KERNEL_LOGGING is enabled so you can see any
+	 * warnings/errors or higher on your system console.
 	 */
 	if (!debug && !kerndebug)
 		klogctl(6, NULL, 0);
-
+#endif
 	/*
 	 * First level hooks, if you want to run here, you're
 	 * pretty much on your own.  Nothing's up yet ...
@@ -204,7 +213,7 @@ static int fsck(int pass)

 	fp = setmntent(fstab, "r");
 	if (!fp) {
-		err(1, "Failed opening fstab: %s", fstab);
+		logit(LOG_CONSOLE | LOG_ALERT, "Failed opening fstab: %s", fstab);
 		sulogin(1);
 	}
 	dbg("Opened %s, pass %d", fstab, pass);
@@ -263,10 +272,15 @@ static int fsck(int pass)
 		 * errors were corrected but that the boot may proceed.
 		 */
 		if (fsck_rc > 1) {
-			logit(LOG_CONSOLE | LOG_ALERT, "Failed fsck %s, attempting sulogin ...", dev);
-			sulogin(1);
+			if (hasmntopt(mnt,"nofail")) {
+                        	logit(LOG_CONSOLE | LOG_WARNING, "Ignoring failed fsck %s because of nofail option", dev);
+                        	fsck_rc = 0;
+			} else {
+				logit(LOG_CONSOLE | LOG_ALERT, "Failed fsck %s, attempting sulogin ...", dev);
+				sulogin(1);
+			}
 		}
-		rc += fsck_rc;
+		rc |= fsck_rc;
 	}

 	endmntent(fp);
@@ -354,6 +368,8 @@ static void fs_remount_root(int fsckerr)
 */
 static void fs_finalize(void)
 {
+	int flags = MS_NOEXEC | MS_NOSUID;
+
 	/*
 	 * Some systems rely on us to both create /dev/shm and, to mount
 	 * a tmpfs there.  Any system with dbus needs shared memory, so
@@ -361,8 +377,8 @@ static void fs_finalize(void)
 	 * the /etc/fstab file already.
 	 */
 	if (!fismnt("/dev/shm")) {
-		makedir("/dev/shm", 0777);
-		fs_mount("shm", "/dev/shm", "tmpfs", 0, "mode=0777");
+		makedir("/dev/shm", 1777);
+		fs_mount("shm", "/dev/shm", "tmpfs", flags | MS_NODEV, "mode=1777");
 	}

 	/* Modern systems use /dev/pts */
@@ -380,7 +396,13 @@ static void fs_finalize(void)
 		snprintf(opts, sizeof(opts), "gid=%d,mode=%d,ptmxmode=0666", gid, mode);

 		makedir("/dev/pts", 0755);
-		fs_mount("devpts", "/dev/pts", "devpts", MS_NOSUID | MS_NOEXEC, opts);
+		fs_mount("devpts", "/dev/pts", "devpts", flags, opts);
+	}
+
+	/* Needed on systems like Alpine Linux */
+	if (!fismnt("/dev/mqueue")) {
+		makedir("/dev/mqueue", 1777);
+		fs_mount("mqueue", "/dev/mqueue", "tmpfs", flags | MS_NODEV, NULL);
 	}

 	/*
@@ -392,7 +414,7 @@ static void fs_finalize(void)
 	 * To override any of this behavior, add entries to /etc/fstab
 	 * for /run (and optionally /run/lock).
 	 */
-	if (fisdir("/run") && !fismnt("/run")) {
+	if (fisdir("/run") && !fismnt("/run") && !fistmpfs("/run")) {
 		fs_mount("tmpfs", "/run", "tmpfs", MS_NOSUID | MS_NODEV | MS_NOEXEC | MS_RELATIME, "mode=0755,size=10%");

 		/* This prevents user DoS of /run by filling /run/lock at the expense of another tmpfs, max 5MiB */
@@ -401,7 +423,7 @@ static void fs_finalize(void)
 	}

 	/* Modern systems use tmpfs for /tmp */
-	if (!fismnt("/tmp"))
+	if (!fismnt("/tmp") && !fistmpfs("/tmp"))
 		fs_mount("tmpfs", "/tmp", "tmpfs", MS_NOSUID | MS_NODEV, "mode=1777");
 }

@@ -695,6 +717,10 @@ int main(int argc, char *argv[])
 	cond_set_oneshot(plugin_hook_str(HOOK_BANNER));
 	cond_set_oneshot(plugin_hook_str(HOOK_ROOTFS_UP));

+	/* Some bootstrap tasks may need to know if we're in a container. */
+	if (in_container())
+		cond_set_oneshot("int/container");
+
 	/*
 	 * Initialize .conf system and load static /etc/finit.conf then
 	 * tell the world what we used.
@@ -1,7 +1,7 @@
 /* Finit - Fast /sbin/init replacement w/ I/O, hook & service plugins
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -121,6 +121,7 @@ extern int    single;
 extern int    bootstrap;
 extern int    kerndebug;
 extern int    syncsec;
+extern int    readiness;
 extern char  *fstab;
 extern char  *sdown;
 extern char  *network;
@@ -1,6 +1,6 @@
 /* Initialize and serve a login terminal
 *
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -121,6 +121,9 @@ static int osrel(struct osrel *rel)
 			snprintf(rel->version, sizeof(rel->version), "(%s)", codename);
 	}

+	if (rel->id[0] && !strcmp(rel->id, "alpine"))
+		return 1;	/* compat mode for \r et al. */
+
 	return 0;
 }

@@ -309,9 +312,9 @@ static int exec_login(char *name)
 	struct stat st;

 	if (passenv)
-		execl(_PATH_LOGIN, _PATH_LOGIN, "-p", name, NULL);
+		execl(_PATH_LOGIN, _PATH_LOGIN, "-p", "--", name, NULL);
 	else
-		execl(_PATH_LOGIN, _PATH_LOGIN, name, NULL);
+		execl(_PATH_LOGIN, _PATH_LOGIN, "--", name, NULL);

 	/*
 	 * Failed to exec login, should not happen on normal systems.
@@ -1,7 +1,7 @@
 /* Misc. utility functions for finit and its plugins
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -87,6 +87,9 @@ void console_init(void)
 	/* Enable line wrap, if disabled previously, e.g., qemu */
 	dprint(STDOUT_FILENO, "\033[?7h", 5);

+	/* Reset attributes, background and foreground color  */
+	dprint(STDOUT_FILENO, "\033[49m\033[39m\e[2J", 14);
+
 	log_init();
 }

@@ -522,9 +525,10 @@ void networking(int updown)

 		pid = fork();
 		if (pid == 0) {
-			int rc = EX_OSERR;
 			const char *cmd;
+			char buf[256];
 			FILE *pp;
+			int rc;

 			setsid();
 			sig_unblock();
@@ -539,16 +543,16 @@ void networking(int updown)
 				cmd = "ifdown -a -f 2>&1";

 			pp = popen(cmd, "r");
-			if (pp) {
-				char buf[256];
+			if (!pp)
+				_exit(EX_OSERR);

-				while (fgets(buf, sizeof(buf), pp))
-					logit(LOG_NOTICE, "network: %s", chomp(buf));
+			while (fgets(buf, sizeof(buf), pp))
+				logit(LOG_NOTICE, "network: %s", chomp(buf));

-				rc = pclose(pp);
-			}
-
-			_exit(rc);
+			rc = pclose(pp);
+			if (rc == -1)
+				_exit(EX_OSERR);
+			_exit(WEXITSTATUS(rc));
 		}
 		cgroup_service("network", pid, NULL);
 		print(pid > 0 ? 0 : 1, "%s network interfaces ...",
@@ -581,7 +585,8 @@ int in_container(void)
 		"lxc",
 		"docker",
 		"kubepod",
-		"unshare"
+		"unshare",
+		"systemd-nspawn"
 	};
 	const char *files[] = {
 		"/run/.containerenv",
@@ -1,7 +1,7 @@
 /* Misc. utility functions and C-library extensions for finit and its plugins
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -141,6 +141,7 @@ static inline int ln(const char *target, const char *linkpath)

 	return 0;
 }
+
 static inline int dprint(int fd, const char *s, size_t len)
 {
 	size_t loop = 3;
@@ -159,7 +160,7 @@ static inline int dprint(int fd, const char *s, size_t len)
 	return rc;
 }

-static inline char *fgetval(char *line, const char *key, char *sep)
+static inline char *fgetval(const char *line, const char *key, char *sep)
 {
 	char *ptr, *str, *copy;
 	size_t len;
@@ -1,6 +1,6 @@
 /* New client tool, replaces old /dev/initctl API and telinit tool
 *
- * Copyright (c) 2015-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2015-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -872,7 +872,7 @@ static char *svc_environ(svc_t *svc, char *buf, size_t len, int ansi)
 {
 	int bold = missing(svc);

-	if (!ansi || svc_checkenv(svc) || svc->env[0] == '-')
+	if (!ansi || svc_checkenv(svc))
 		bold = 0;

 	strlcpy(buf, bold ? "\e[1m" : "", len);
@@ -1,6 +1,6 @@
 /* New client tool, replaces old /dev/initctl API and telinit tool
 *
- * Copyright (c) 2015-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2015-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,7 +1,7 @@
 /* inotify watcher for files or directories
 *
 * Copyright (c) 2015-2016  Tobias Waldekranz <tobias@waldekranz.com>
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -96,6 +96,12 @@ int iwatch_add1(struct iwatch *iw, char *file, uint32_t mask)
 	if (!initialized)
 		return -1;

+	iwp = iwatch_find_by_path(iw, file);
+	if (iwp) {
+		dbg("skipping, %s already registered", file);
+		return 0;
+	}
+
 	if (!fexist(file)) {
 		dbg("skipping %s: no such file or directory", file);
 		return 0;
@@ -1,7 +1,7 @@
 /* inotify watcher for files or directories
 *
 * Copyright (c) 2015-2016  Tobias Waldekranz <tobias@waldekranz.com>
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Listens to kernel events like AC power status and manages sys/ conditions
 *
- * Copyright (c) 2021-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2021-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Finit daemon log functions
 *
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -42,8 +42,6 @@ static int loglevel = LOG_INFO;

 void log_init(void)
 {
-	ttinit();
-
 	if (debug)
 		loglevel = LOG_DEBUG;
 	else
@@ -53,13 +51,6 @@ void log_init(void)
 /* If we enabled terse mode at boot, restore to previous setting at shutdown */
 void log_exit(void)
 {
-	/*
-	 * Unless in debug mode at shutdown, Reinitialize screen,
-	 * terminal may have been resized at runtime
-	 */
-	if (!debug)
-		ttinit();
-
 	enable_progress(1);
 }

@@ -148,7 +139,7 @@ void logit(int prio, const char *fmt, ...)
 		goto done;
 	}

-	fprintf(fp, "<%d>finit[1]:", LOG_DAEMON | prio);
+	fprintf(fp, "<%d>finit[1]: ", LOG_DAEMON | prio);
 	vfprintf(fp, fmt, ap);
 	fclose(fp);

@@ -1,6 +1,6 @@
 /* Finit daemon log functions
 *
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2018-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2018-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Handle MD arrays
 *
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -28,6 +28,7 @@
 #include <string.h>

 #include "helpers.h"
+#include "util.h"


 static glob_t *get_arrays(void)
@@ -48,17 +49,18 @@ static glob_t *get_arrays(void)
 */
 void mdadm_wait(void)
 {
-	size_t i;
 	glob_t *gl;
-	char cmd[160];

 	/* Setup kernel specific settings, e.g. allow broadcast ping, etc. */
 	gl = get_arrays();
 	if (gl) {
-		for (i = 0; i < gl->gl_pathc; i++) {
-			char *array;
+		size_t i;

-			array = basename(gl->gl_pathv[i]);
+		for (i = 0; i < gl->gl_pathc; i++) {
+			const char *array;
+			char cmd[160];
+
+			array = basenm(gl->gl_pathv[i]);
 			snprintf(cmd, sizeof(cmd), "mdadm --wait-clean /dev/%s >/dev/null", array);
 			run_interactive(cmd, "Marking MD array %s as clean", array);
 		}
@@ -1,6 +1,6 @@
 /* Mount and unmount helpers
 *
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,7 +1,7 @@
 /* PID and PID file helpers
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -192,7 +192,7 @@ int pid_file_set(svc_t *svc, char *file, int not)
 * pid:foo.tla  --> /run/foo.tla.pid
 * pid:/tmp/foo --> /tmp/foo.pid        (Not handled by pidfile plugin!)
 *
- * An exclamation mark, or logial NOT, in the first character position
+ * An exclamation mark, or logical NOT, in the first character position
 * indicates that Finit should *not* manage the PID file, and that the
 * process uses a "non-standard" location.  Eg. if service is 'bar'
 * Finit would assume the PID file is /run/bar.pid and the below simply
@@ -1,7 +1,7 @@
 /* PID and PID file helpers
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* Plugin based services architecture for finit
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -43,6 +43,7 @@
 #include "private.h"
 #include "service.h"
 #include "sig.h"
+#include "util.h"

 #define is_io_plugin(p) ((p)->io.cb && (p)->io.fd > 0)
 #define SEARCH_PLUGIN(str)						\
@@ -77,23 +78,26 @@ static char *trim_ext(char *name)

 int plugin_register(plugin_t *plugin)
 {
+	const char *nm;
+
 	if (!plugin) {
 		errno = EINVAL;
 		return 1;
 	}

 	/* Setup default name if none is provided */
-	if (!plugin->name) {
+	nm = plugin->name;
+	if (!nm) {
 #ifndef ENABLE_STATIC
 		Dl_info info;

 		if (dladdr(plugin, &info) && info.dli_fname)
-			plugin->name = basename(info.dli_fname);
+			nm = basenm(info.dli_fname);
 #endif
-		if (!plugin->name)
-			plugin->name = "unknown";
+		if (!nm)
+			nm = "unknown";
 	}
-	plugin->name = trim_ext(strdup(plugin->name));
+	plugin->name = trim_ext(strdup(nm));

 	/* Already registered? */
 	if (plugin_find(plugin->name)) {
@@ -253,7 +257,7 @@ void plugin_run_hook(hook_point_t no, void *arg)

 	PLUGIN_ITERATOR(p, tmp) {
 		if (p->hook[no].cb) {
-			dbg("Calling %s hook n:o %d (arg: %p) ...", basename(p->name), no, arg ?: "NIL");
+			dbg("Calling %s hook n:o %d (arg: %p) ...", basenm(p->name), no, arg ?: "NIL");
 			p->hook[no].cb(arg ? arg : p->hook[no].arg);
 		}
 	}
@@ -301,9 +305,9 @@ int plugin_io_init(plugin_t *p)
 	if (!is_io_plugin(p))
 		return 0;

-	dbg("Initializing plugin %s for I/O", basename(p->name));
+	dbg("Initializing plugin %s for I/O", basenm(p->name));
 	if (uev_io_init(ctx, &p->watcher, generic_io_cb, p, p->io.fd, p->io.flags)) {
-		warn("Failed setting up I/O plugin %s", basename(p->name));
+		warn("Failed setting up I/O plugin %s", basenm(p->name));
 		return 1;
 	}

@@ -1,6 +1,6 @@
 /* Plugin based services architecture for finit
 *
- * Copyright (c) 2012-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2012-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,7 +1,7 @@
 /* Private header file for main finit daemon, not for plugins
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* reboot, halt, poweroff, shutdown, suspend for finit
 *
- * Copyright (c) 2009-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2009-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -26,18 +26,27 @@
 #else
 #include <sys/prctl.h>

+const char *active_msg = NULL;
+int interactive = 1;
 int debug;

 static void print_desc(const char *prefix, const char *msg)
 {
-	fprintf(stderr, "\e[1m[\e[0m\e[1;33m ⋯  \e[0m\e[1m]\e[0m %s %s", prefix, msg);
+	if (interactive)
+		fprintf(stderr, "\e[1m[\e[0m\e[1;33m ⋯  \e[0m\e[1m]\e[0m %s %s", prefix, msg);
+	else
+		fprintf(stderr, "%s %s ...\n", prefix, msg);
+	active_msg = msg;
 }
 static void print_result(int rc)
 {
-	if (rc)
-		fputs("\r\e[1m[\e[0m\e[1;31mFAIL\e[0m\e[1m]\e[0m\n", stderr);
-	else
-		fputs("\r\e[1m[\e[0m\e[1;32m OK \e[0m\e[1m]\e[0m\n", stderr);
+	if (interactive) {
+		if (rc)
+			fputs("\r\e[1m[\e[0m\e[1;31mFAIL\e[0m\e[1m]\e[0m\n", stderr);
+		else
+			fputs("\r\e[1m[\e[0m\e[1;32m OK \e[0m\e[1m]\e[0m\n", stderr);
+	} else
+		fprintf(stderr, "[%s]  %s\n", rc ? "FAIL" : " OK ", active_msg ?: "");
 }

 void sig_unblock(void)
@@ -193,8 +202,11 @@ int main(int argc, char *argv[])
 	int rc, c, progress = 0, sysv = 0;
 	char *dir;

-	while ((c = getopt(argc, argv, "dh?ps")) != EOF) {
+	while ((c = getopt(argc, argv, "bdh?ps")) != EOF) {
 		switch(c) {
+		case 'b':	/* batch mode */
+			interactive = 0;
+			break;
 		case 'd':
 			debug = 1;
 			break;
@@ -1,6 +1,6 @@
 /* Work queue helper functions
 *
- * Copyright (c) 2018-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2018-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -23,6 +23,7 @@

 #include "config.h"
 #include "finit.h"
+#include "log.h"
 #include "schedule.h"

 #define SC_INIT 0x494E4954	/* "INIT", see ascii(7) */
@@ -35,6 +36,7 @@ static void cb(uev_t *w, void *arg, int events)
 	struct wq *work = (struct wq *)arg;

 	if (UEV_ERROR == events) {
+		dbg("%s(): spurious problem with schedule work timer, restarting.", __func__);
 		uev_timer_start(w);
 		return;
 	}
@@ -1,6 +1,6 @@
 /* Work queue helper functions
 *
- * Copyright (c) 2018-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2018-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* List and enable/disable service configurations
 *
- * Copyright (c) 2017-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2017-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -222,20 +222,13 @@ int serv_list(char *arg)
 * If the resulting file doesn't exist, and creat is not set, *or*
 * the base directory doesn't exist, we return NULL.
 .*/
-static char *conf(char *path, size_t len, char *name, int creat)
+static char *conf(char *path, size_t len, char *name, int creat, int template)
 {
-	char corr[40];
-
 	if (!name || !name[0] || !strcmp(name, "finit") || !strcmp(name, "finit.conf")) {
 		strlcpy(path, finit_conf, len);
 		return path;
 	}

-	if (!strstr(name, ".conf")) {
-		snprintf(corr, sizeof(corr), "%s.conf", name);
-		name = corr;
-	}
-
 	if (!fisdir(finit_rcsd))
 		return NULL;

@@ -243,14 +236,25 @@ static char *conf(char *path, size_t len, char *name, int creat)
 	if (!fisdir(path)) {
 		if (creat && mkdir(path, 0755) && errno != EEXIST)
 			return NULL;
-		else
-			paste(path, len, finit_rcsd, name);
+		paste(path, len, finit_rcsd, name);
 	} else
 		strlcat(path, name, len);

+	if (suffix(path, len, ".conf"))
+		return NULL;
+
 	/* fall back to static service unless edit/create */
-	if (!creat && !fexist(path))
-		paste(path, len, finit_rcsd, name);
+	if (!creat && !fexist(path)) {
+		char *at = strchr(path, '@');
+
+		if (template && at)
+			*++at = 0;
+		else
+			paste(path, len, finit_rcsd, name);
+
+		if (suffix(path, len, ".conf"))
+			return NULL;
+	}

 	return path;
 }
@@ -336,14 +340,14 @@ int do_disable(char *arg, int check)
 		return serv_list("available");
 	}

-	len = strlen(arg);
-	serv = alloca(len + 6);
+	len = strlen(arg) + 7;
+	serv = alloca(len);
 	if (!serv)
 		ERR(71, "failed allocating stack");

-	strlcpy(serv, arg, len + 6);
-	if (len < 6 || strcmp(&serv[len - 5], ".conf"))
-		strlcat(serv, ".conf", len + 6);
+	strlcpy(serv, arg, len);
+	if (suffix(serv, len, ".conf"))
+		ERR(71, "failed composing service name (%s)", serv);

 	if (chdir(finit_rcsd))
 		ERR(72, "failed cd %s", finit_rcsd);
@@ -374,20 +378,30 @@ int serv_touch(char *arg)
 		return serv_list("enabled");
 	}

-	fn = conf(path, sizeof(path), arg, 0);
+	/* 1. Try /etc/finit.d/enabled/$arg.conf to handle template@.conf */
+	paste(path, sizeof(path), finit_rcsd, "enabled/");
+	strlcat(path, arg, sizeof(path));
+	if (!suffix(path, sizeof(path), ".conf") && fexist(path)) {
+		fn = path;
+		goto touchit;
+	}
+
+	/* 2. Try /etc/finit.d/available/$arg.conf and other combos (legacy) */
+	fn = conf(path, sizeof(path), arg, 0, 0);
 	if (!fexist(fn)) {
 		if (!strstr(arg, "finit.conf"))
-			ERRX(72, "%s not available.", arg);
+			ERRX(noerr ? 0 : 72, "%s not available.", arg);
 		if (is_builtin(arg))
-			ERRX(4, "%s is a built-in service.", arg);
+			ERRX(noerr ? 0 : 4, "%s is a built-in service.", arg);

 		strlcpy(path, finit_conf, sizeof(path));
 		fn = path;
 	}

+touchit:
 	/* libite:touch() follows symlinks */
 	if (utimensat(AT_FDCWD, fn, NULL, AT_SYMLINK_NOFOLLOW))
-		ERR(71, "failed marking %s for reload", fn);
+		ERR(noerr ? 0 : 71, "failed marking %s for reload", fn);

 	return 0;
 }
@@ -397,13 +411,18 @@ int serv_show(char *arg)
 	char path[256];
 	char *fn;

-	fn = conf(path, sizeof(path), arg, 0);
+	fn = conf(path, sizeof(path), arg, 0, 0);
 	if (!fexist(fn)) {
 		if (is_builtin(arg))
 			ERRX(4, "%s is a built-in service.", arg);

-		WARNX("Cannot find %s", arg);
-		return 1;
+		fn = conf(path, sizeof(path), arg, 0, 1);
+		if (!fn || !fexist(fn)) {
+			WARNX("Cannot find %s", arg);
+			return 1;
+		}
+
+		return systemf("cat %s | sed 's/%%i/system/g'", fn);
 	}

 	return systemf("cat %s", fn);
@@ -434,7 +453,7 @@ static int do_edit(char *arg, int creat)
 	char path[256];
 	char *fn;

-	fn = conf(path, sizeof(path), arg, creat);
+	fn = conf(path, sizeof(path), arg, creat, 0);
 	if (!fexist(fn)) {
 		if (is_builtin(arg))
 			ERRX(4, "%s is a built-in service.", arg);
@@ -488,7 +507,7 @@ int serv_creat(char *arg)
 		return do_edit(arg, 1);

 	/* Open fn for writing from pipe */
-	fn = conf(buf, sizeof(buf), arg, 1);
+	fn = conf(buf, sizeof(buf), arg, 1, 0);
 	if (!fn)
 		ERR(73, "failed creating conf %s", arg);

@@ -517,7 +536,7 @@ int serv_delete(char *arg)
 		return serv_list("available");
 	}

-	fn = conf(buf, sizeof(buf), arg, 0);
+	fn = conf(buf, sizeof(buf), arg, 0, 0);
 	if (!fn) {
 		if (is_builtin(arg))
 			ERRX(4, "%s is a built-in service.", arg);
@@ -1,6 +1,6 @@
 /* List and enable/disable service configurations
 *
- * Copyright (c) 2017-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2017-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,7 +1,7 @@
 /* Finit service monitor, task starter and generic API for managing svc_t
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -42,14 +42,14 @@ int       service_timeout_after  (svc_t *svc, int timeout, void (*cb)(svc_t *svc
 int       service_timeout_cancel (svc_t *svc);

 void      service_forked         (svc_t *svc);
-void      service_ready          (svc_t *svc);
+void      service_ready          (svc_t *svc, int ready);

 int       service_stop           (svc_t *svc);
 int       service_step           (svc_t *svc);
 void      service_step_all       (int types);
 void      service_worker         (void *unused);

-int       service_completed      (void);
+int       service_completed      (svc_t **svc);
 void      service_notify_reconf  (void);

 void      service_init           (uev_ctx_t *ctx);
@@ -1,7 +1,7 @@
 /* Signal management - Be conservative with what finit responds to!
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -232,6 +232,8 @@ void do_iterate_proc(int (*cb)(int, void *), void *data)
 					dbg("Skipping %s ...", file);
 				else if (file[0] == '@')
 					dbg("Skipping %s ...", &file[1]);
+				else if (strstr(file, "initctl"))
+					dbg("Skipping %s ...", file);
 				else
 					if (cb(pid, data)) {
 						dbg("PID %d is still alive (%s)", pid, file);
@@ -1,7 +1,7 @@
 /* Signal management - Be conservative with what finit responds to!
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -52,22 +52,30 @@ sm_t sm;
 */
 static void sm_check_bootstrap(void *work)
 {
-	static int cnt = 120 * 10;	/* We run with 100ms period */
-        int level = cfglevel;
+	static int timeout = 120;
+	int bootstrap_done;
+	int level = cfglevel;
+	svc_t *svc = NULL;

 	dbg("Step all services ...");
 	service_step_all(SVC_TYPE_ANY);

-	if (cnt-- > 0 && !service_completed()) {
-		dbg("Not all bootstrap run/tasks have completed yet ... %d", cnt);
+	bootstrap_done = service_completed(&svc);
+	if (timeout-- > 0 && !bootstrap_done) {
+		dbg("Not all bootstrap run/tasks have completed yet ... %d", timeout);
 		schedule_work(work);
 		return;
 	}

-	if (cnt > 0)
+	if (timeout > 0) {
 		dbg("All run/task have completed, resuming bootstrap.");
-	else
+	} else {
 		dbg("Timeout, resuming bootstrap.");
+		if (svc)
+			print(2, "Timeout waiting for %s to run, resuming bootstrap", svc_ident(svc, NULL, 0));
+		else
+			print(2, "Timeout waiting for unknown run/task, resuming bootstrap");
+	}

 	dbg("Flushing pending .conf file events ...");
 	conf_flush_events();
@@ -99,6 +107,9 @@ static char *sm_status(sm_state_t state)
 	case SM_BOOTSTRAP_STATE:
 		return "bootstrap";

+	case SM_BOOTSTRAP_WAIT_STATE:
+		return "bootstrap/wait";
+
 	case SM_RUNNING_STATE:
 		return "running";

@@ -108,15 +119,20 @@ static char *sm_status(sm_state_t state)
 	case SM_RUNLEVEL_WAIT_STATE:
 		return "runlevel/wait";

+	case SM_RUNLEVEL_CLEAN_STATE:
+		return "runlevel/clean";
+
 	case SM_RELOAD_CHANGE_STATE:
 		return "reload/change";

 	case SM_RELOAD_WAIT_STATE:
 		return "reload/wait";

-	default:
-		return "unknown";
+	case SM_RELOAD_CLEAN_STATE:
+		return "reload/clean";
 	}
+
+	return "unknown";
 }

 static char sm_runlevel(int lvl)
@@ -161,11 +177,17 @@ void sm_init(sm_t *sm)
 void sm_set_runlevel(sm_t *sm, int newlevel)
 {
 	sm->newlevel = newlevel;
+
+	dbg("Flushing pending .conf file events ...");
+	conf_flush_events();
 }

 void sm_set_reload(sm_t *sm)
 {
 	sm->reload = 1;
+
+	dbg("Flushing pending .conf file events ...");
+	conf_flush_events();
 }

 int sm_is_in_teardown(sm_t *sm)
@@ -187,7 +209,7 @@ restart:
 	switch (sm->state) {
 	case SM_BOOTSTRAP_STATE:
 		dbg("Bootstrapping all services in runlevel S from %s", finit_conf);
-		service_step_all(SVC_TYPE_RUNTASK | SVC_TYPE_SERVICE);
+		service_step_all(SVC_TYPE_RUNTASK | SVC_TYPE_SERVICE | SVC_TYPE_SYSV);

 		sm->state = SM_BOOTSTRAP_WAIT_STATE;
 		break;
@@ -208,7 +230,7 @@ restart:
 		service_step_all(SVC_TYPE_ANY);

 		/* Allow runparts to start */
-		cond_set("int/bootstrap");
+		cond_set_oneshot("int/bootstrap");

 		if (sm->newlevel == -1)
 			break;
@@ -221,7 +243,7 @@ restart:
 		/* Disable progress output at normal runtime */
 		enable_progress(0);

-		/* System bootrapped, launch TTYs et al */
+		/* System bootstrapped, launch TTYs et al */
 		bootstrap = 0;
 		service_step_all(SVC_TYPE_RESPAWN);
 		sm->state = SM_RUNNING_STATE;
@@ -305,12 +327,30 @@ restart:
 		sm->in_teardown = 0;
 		service_step_all(SVC_TYPE_ANY);

+		sm->state = SM_RUNLEVEL_CLEAN_STATE;
+		break;
+
+	case SM_RUNLEVEL_CLEAN_STATE:
+		/*
+		 * Wait for post:script or cleanup:script to be collected,
+		 * which moves the svc to HALTED or DEAD state.  We will
+		 * be called by the service_monitor() on collect.
+		 */
+		svc = svc_clean_completed();
+		if (svc) {
+			dbg("Waiting to collect post/cleanup script for %s, cmd %s(%d) ...",
+			    svc_ident(svc, NULL, 0), svc->cmd, svc->pid);
+			break;
+		}
+
 		/* Cleanup stale services */
 		svc_clean_dynamic(service_unregister);

+#ifdef FINIT_RC_LOCAL
 		/* Compat SysV init */
 		if (prevlevel == INIT_LEVEL && !rescue)
 			run_bg(FINIT_RC_LOCAL, NULL);
+#endif

 		/*
 		 * "I've seen things you people wouldn't believe.  Attack ships on fire off
@@ -356,6 +396,22 @@ restart:
 		dbg("Starting services after reconf ...");
 		service_step_all(SVC_TYPE_ANY);

+		sm->state = SM_RELOAD_CLEAN_STATE;
+		break;
+
+	case SM_RELOAD_CLEAN_STATE:
+		/*
+		 * Wait for post:script or cleanup:script to be collected,
+		 * which moves the svc to HALTED or DEAD state.  We will
+		 * be called by the service_monitor() on collect.
+		 */
+		svc = svc_clean_completed();
+		if (svc) {
+			dbg("Waiting to collect post/cleanup script for %s, cmd %s(%d) ...",
+			    svc_ident(svc, NULL, 0), svc->cmd, svc->pid);
+			break;
+		}
+
 		/* Cleanup stale services */
 		svc_clean_dynamic(service_unregister);

@@ -29,9 +29,11 @@ typedef enum {
 	SM_BOOTSTRAP_WAIT_STATE,  /* Waiting for bootstrap to complete */
 	SM_RUNNING_STATE,         /* Normal state, services running */
 	SM_RUNLEVEL_CHANGE_STATE, /* A runlevel change has occurred */
-	SM_RUNLEVEL_WAIT_STATE,   /* Waiting for all stopped runlevel processes to be halted */
+	SM_RUNLEVEL_WAIT_STATE,   /* Waiting for all stopped processes to halt */
+	SM_RUNLEVEL_CLEAN_STATE,  /* Wait for post:scripts and cleanup:scripts */
 	SM_RELOAD_CHANGE_STATE,   /* A reload event has occurred */
-	SM_RELOAD_WAIT_STATE,     /* Waiting for all stopped reload processes to be halted */
+	SM_RELOAD_WAIT_STATE,     /* Waiting for all stopped processes to halt */
+	SM_RELOAD_CLEAN_STATE,    /* Wait for post:scripts and cleanup:scripts */
 } sm_state_t;

 typedef struct sm {
@@ -1,6 +1,6 @@
 /* Reset terminal line settings (stty sane)
 *
- * Copyright (c) 2016-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2016-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,6 +1,6 @@
 /* poor man's sulogin, may be statically linked
 *
- * Copyright (c) 2021-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2021-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -1,7 +1,7 @@
 /* Low-level service primitives and generic API for managing svc_t structures
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -348,6 +348,43 @@ svc_t *svc_stop_completed(void)
 	return NULL;
 }

+
+/**
+ * svc_clean_completed - Have post: and cleanup: scripts finished?
+ *
+ * Called late in runlevel and reload transitions to check if all post: and
+ * cleanup:scripts have completed.  A removed service should end up in the
+ * DEAD state, while a service with a post:script ends up in HALTED.
+ *
+ * Returns:
+ * %NULL if post: and cleanup: scripts have run, otherwise a pointer to
+ * the first found svc_t waiting for post: or cleanup:script.
+ */
+svc_t *svc_clean_completed(void)
+{
+	svc_t *svc, *iter = NULL;
+
+	for (svc = svc_iterator(&iter, 1); svc; svc = svc_iterator(&iter, 0)) {
+		if (svc_enabled(svc))
+			continue;
+
+		if (svc_is_runtask(svc) && svc->state == SVC_DONE_STATE)
+			continue;
+
+		if (svc_is_removed(svc)) {
+			if (svc->state == SVC_DEAD_STATE)
+				continue; /* any cleanup:script done */
+		} else {
+			if (svc->state == SVC_HALTED_STATE)
+				continue; /* any post:script done */
+		}
+
+		return svc;
+	}
+
+	return NULL;
+}
+
 /**
 * svc_find - Find a service object by its full path name
 * @name: Full path name, e.g., /sbin/syslogd
@@ -580,7 +617,7 @@ void svc_clean_dynamic(void (*cb)(svc_t *))
 	svc_t *svc, *iter = NULL;

 	for (svc = svc_iterator(&iter, 1); svc; svc = svc_iterator(&iter, 0)) {
-		if (svc->removed && cb)
+		if (svc_is_removed(svc) && cb)
 			cb(svc);
 	}
 }
@@ -649,7 +686,7 @@ int svc_enabled(svc_t *svc)
 		return 0;
 	}

-	if (!svc_ifthen(0, NULL, svc->ifstmt)) {
+	if (!svc_ifthen(0, NULL, svc->ifstmt, svc->nowarn)) {
 //		dbg("ifthen:%s>", svc->ifstmt[0] ? svc->ifstmt : "<");
 		return 0;
 	}
@@ -704,12 +741,14 @@ int svc_conflicts(svc_t *svc)
 * @is_conf: Set when called by service_mark_unavail()
 * @ident:   svc_t identififcation (name:id)
 * @stmt:    if: statement from .conf file
+ * @quiet:   If non-zero, do not warn in syslog
 *
 * Returns:
 * %TRUE(1) yes, use this svc_t, %FALSE(0) prune
 */
-int svc_ifthen(int is_conf, const char *ident, char *stmt)
+int svc_ifthen(int is_conf, const char *ident, char *stmt, int quiet)
 {
+	char stmts[MAX_IDENT_LEN];
 	int not = 0;
 	svc_t *svc;

@@ -724,39 +763,48 @@ int svc_ifthen(int is_conf, const char *ident, char *stmt)
 		if (is_conf)
 			return 1;

-		if (stmt[0] == '!') {
-			stmt++;
-			not++;
-		}
-
 		while (ptr[i] != '>' && ptr[i] != 0)
 			i++;
 		ptr[i] = 0;

-		cond = cond_get(stmt);
-		if (not && cond == COND_ON)
-			return 0;
-		if (!not && cond == COND_OFF)
-			return 0;
+		strlcpy(stmts, stmt, sizeof(stmts));
+		for (stmt = strtok(stmts, ","); stmt; stmt = strtok(NULL, ","), not = 0) {
+			if (stmt[0] == '!') {
+				stmt++;
+				not++;
+			}
+
+			cond = cond_get(stmt);
+			if (not && cond == COND_ON)
+				return 0;
+			if (!not && cond == COND_OFF)
+				return 0;
+		}
+
 		return 1;
 	}

 	if (!is_conf)
 		return 1;

-	if (stmt[0] == '!') {
-		stmt++;
-		not++;
-	}
+	strlcpy(stmts, stmt, sizeof(stmts));
+	for (stmt = strtok(stmts, ","); stmt; stmt = strtok(NULL, ","), not = 0) {
+		if (stmt[0] == '!') {
+			stmt++;
+			not++;
+		}

-	svc = svc_find_by_str(stmt);
-	if (not && svc) {
-		logit(LOG_NOTICE, "skipping %s, %s already loaded.", ident, svc_ident(svc, NULL, 0));
-		return 0;
-	}
-	if (!not && !svc) {
-		logit(LOG_NOTICE, "skipping %s, %s not available.", ident, stmt);
-		return 0;
+		svc = svc_find_by_str(stmt);
+		if (not && svc) {
+			if (!quiet)
+				logit(LOG_NOTICE, "skipping %s, %s already loaded.", ident, svc_ident(svc, NULL, 0));
+			return 0;
+		}
+		if (!not && !svc) {
+			if (!quiet)
+				logit(LOG_NOTICE, "skipping %s, %s not available.", ident, stmt);
+			return 0;
+		}
 	}

 	return 1;
@@ -1,7 +1,7 @@
 /* Low-level service primitives and generic API for managing svc_t structures
 *
 * Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
- * Copyright (c) 2008-2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2008-2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -52,14 +52,16 @@ typedef enum {
 } svc_type_t;

 #define SVC_TYPE_ANY          (-1)
-#define SVC_TYPE_RESPAWN      (SVC_TYPE_SERVICE | SVC_TYPE_TTY)
-#define SVC_TYPE_RUNTASK      (SVC_TYPE_RUN | SVC_TYPE_TASK | SVC_TYPE_SYSV)
+#define SVC_TYPE_RESPAWN      (SVC_TYPE_SERVICE | SVC_TYPE_SYSV | SVC_TYPE_TTY)
+#define SVC_TYPE_RUNTASK      (SVC_TYPE_RUN | SVC_TYPE_TASK)

 typedef enum {
 	SVC_HALTED_STATE = 0,	/* Not allowed in runlevel, or not enabled. */
 	SVC_DONE_STATE,		/* Task/Run job has been run */
+	SVC_DEAD_STATE,		/* Process is dead and scheduled for removal */
+	SVC_CLEANUP_STATE,	/* Running cleanup: script */
+	SVC_TEARDOWN_STATE,	/* Running post: script */
 	SVC_STOPPING_STATE,	/* Waiting to collect the child process */
-	SVC_CLEANUP_STATE,	/* Running post: script */
 	SVC_SETUP_STATE,	/* Running pre: script */
 	SVC_PAUSED_STATE,	/* Condition is in flux, process SIGSTOPed */
 	SVC_WAITING_STATE,	/* Enabled but condition not satisfied */
@@ -83,6 +85,14 @@ typedef enum {
 	SVC_ONCRASH_SCRIPT,
 } svc_oncrash_action_t;

+/* 0: none, 1: systemd, 2: s6 */
+typedef enum {
+	SVC_NOTIFY_NONE = 0,
+	SVC_NOTIFY_PID,
+	SVC_NOTIFY_SYSTEMD,
+	SVC_NOTIFY_S6,
+} svc_notify_t;
+
 #define MAX_ID_LEN       16
 #define MAX_ARG_LEN      64
 #define MAX_CMD_LEN      256
@@ -138,7 +148,7 @@ typedef struct svc {
 	char           cond[MAX_COND_LEN];

 	/* Instance specifics */
-	int            job;	       /* For intenal use only, canonical ref is NAME:ID */
+	int            job;	       /* For internal use only, canonical ref is NAME:ID */
 	char           name[MAX_ARG_LEN];
 	char           id[MAX_ID_LEN]; /* :ID */
 	char           ifstmt[MAX_IDENT_LEN];
@@ -188,9 +198,18 @@ typedef struct svc {
 	char           conflict[MAX_ARG_LEN];
 	char	       desc[MAX_STR_LEN];
 	char	       env[MAX_CMD_LEN];
+
 	char	       pre_script[MAX_CMD_LEN];
+	int	       pre_tmo;
+
 	char	       post_script[MAX_CMD_LEN];
+	int	       post_tmo;
+
 	char	       ready_script[MAX_CMD_LEN];
+	int	       ready_tmo;
+
+	char	       cleanup_script[MAX_CMD_LEN];
+	int	       cleanup_tmo;

 	/*
 	 * Used to forcefully kill services that won't shutdown on
@@ -202,7 +221,7 @@ typedef struct svc {
 	/*
 	 * Readiness notification socket: systemd, s6
 	 */
-	int	       notify;	       /* 0: none, 1: systemd, 2: s6 */
+	svc_notify_t   notify;
 	uev_t	       notify_watcher; /* i/o watcher */

 	/* time at svc_del(), used by gc timer */
@@ -229,6 +248,7 @@ void	    svc_foreach	           (int (*cb)(svc_t *));
 void        svc_foreach_type       (int types, int (*cb)(svc_t *));

 svc_t	   *svc_stop_completed	   (void);
+svc_t      *svc_clean_completed    (void);

 void	    svc_mark		   (svc_t *svc);
 void	    svc_mark_dynamic       (void);
@@ -241,7 +261,7 @@ void	    svc_prune_bootstrap	   (void);
 void        svc_enable             (svc_t *svc);
 int         svc_enabled            (svc_t *svc);
 int         svc_conflicts          (svc_t *svc);
-int         svc_ifthen             (int is_conf, const char *ident, char *stmt);
+int         svc_ifthen             (int is_conf, const char *ident, char *stmt, int quiet);

 int         svc_parse_jobstr       (char *str, size_t len, void *user_data, int (*found)(svc_t *, void *), int (not_found)(char *, char *, void *));

@@ -251,6 +271,7 @@ static inline int svc_is_tty       (svc_t *svc) { return svc && SVC_TYPE_TTY
 static inline int svc_is_runtask   (svc_t *svc) { return svc && (SVC_TYPE_RUNTASK & svc->type);}
 static inline int svc_is_forking   (svc_t *svc) { return svc && svc->forking; }
 static inline int svc_is_manual    (svc_t *svc) { return svc && svc->manual; }
+static inline int svc_is_nohup     (svc_t *svc) { return svc && (0 == svc->sighup); }

 static inline int svc_in_runlevel  (svc_t *svc, int runlevel) { return svc && ISSET(svc->runlevels, runlevel); }
 static inline int svc_nohup        (svc_t *svc) { return svc &&  (0 == svc->sighup || 0 != svc->args_dirty); }
@@ -258,11 +279,14 @@ static inline int svc_has_pidfile  (svc_t *svc) { return svc_is_daemon(svc) && s
 static inline int svc_has_pre      (svc_t *svc) { return svc->pre_script[0];  }
 static inline int svc_has_post     (svc_t *svc) { return svc->post_script[0]; }
 static inline int svc_has_ready    (svc_t *svc) { return svc->ready_script[0];}
+static inline int svc_has_cleanup  (svc_t *svc) { return svc->cleanup_script[0]; }

 static inline void svc_starting    (svc_t *svc) { if (svc) svc->starting = 1;       }
 static inline void svc_started     (svc_t *svc) { if (svc) svc->starting = 0;       }
 static inline int  svc_is_starting (svc_t *svc) { return svc && 0 != svc->starting; }
 static inline int  svc_is_running  (svc_t *svc) { return svc && svc->state == SVC_RUNNING_STATE; }
+static inline int  svc_is_stopping (svc_t *svc) { return svc && svc->state == SVC_STOPPING_STATE; }
+static inline int  svc_is_stopped  (svc_t *svc) { return svc && svc->block == SVC_BLOCK_USER; }

 static inline int  svc_is_removed  (svc_t *svc) { return svc && svc->removed; }
 static inline int  svc_is_changed  (svc_t *svc) { return svc &&  0 != svc->dirty; }
@@ -377,12 +401,15 @@ static inline char *svc_status(svc_t *svc)
 			return "stopping";
 		}

-	case SVC_CLEANUP_STATE:
-		return "cleanup";
+	case SVC_TEARDOWN_STATE:
+		return "teardown";

 	case SVC_SETUP_STATE:
 		return "setup";

+	case SVC_CLEANUP_STATE:
+		return "cleanup";
+
 	case SVC_PAUSED_STATE:
 		return "paused";

@@ -395,6 +422,9 @@ static inline char *svc_status(svc_t *svc)
 	case SVC_RUNNING_STATE:
 		return "running";

+	case SVC_DEAD_STATE:
+		return "dead";
+
 	default:
 		return "UNKNOWN";
 	}
@@ -1,6 +1,6 @@
 /* Limited tmpfiles.d implementation
 *
- * Copyright (c) 2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@@ -78,8 +78,8 @@ static int do_delete(const char *fpath, const struct stat *sb, int tflag, struct
 	if (ftw->level == 0)
 		return 1;

-	if (remove(fpath))
-		warn("Failed removing condition %s", fpath);
+	if (remove(fpath) && errno != EBUSY)
+		warn("Failed removing %s", fpath);

 	return 0;

@@ -90,7 +90,7 @@ static int rmrf(const char *path)
 	if (!fisdir(path))
 		return 0;

-	nftw(path, do_delete, 20, FTW_DEPTH);
+	nftw(path, do_delete, 20, FTW_DEPTH | FTW_PHYS);
 	if (remove(path) && errno != ENOENT)
 		warn("Failed removing path %s", path);

@@ -434,6 +434,10 @@ static void tmpfiles(char *line)
 			}
 		}
 		break;
+	case 'X':
+	case 'x':
+		dbg("Unsupported x/X command, ignoring %s, no support for clean at runtime.", path);
+		break;
 	case 'Z':
 		opts = "-R";
 		/* fallthrough */
@@ -471,7 +475,7 @@ void tmpfilesd(void)
 	/* in priority order */
 	char *dir[] = {
 		FINIT_TMPFILES "/*.conf",
-		TMPFILES_PATH "/*.conf",
+		TMPFILES_PATH_ "/*.conf",
 		"/usr/lib/tmpfiles.d/*.conf",
 		"/run/tmpfiles.d/*.conf",
 		"/etc/tmpfiles.d/*.conf", /* local admin overrides */
@@ -492,7 +496,7 @@ void tmpfilesd(void)

 		/* check for overrides */
 		for (j = i + 1; j < gl.gl_pathc; j++) {
-			if (strcmp(basename(fn), basename(gl.gl_pathv[j])))
+			if (strcmp(basenm(fn), basenm(gl.gl_pathv[j])))
 				continue;
 			fn = NULL;
 			break;
@@ -1,6 +1,6 @@
 /* Limited tmpfiles.d implementation
 *
- * Copyright (c) 2023  Joachim Wiberg <troglobit@gmail.com>
+ * Copyright (c) 2024  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
--- a/Show More
+++ b/Show More