Merge pull request #509 from anees-r3hman/umount-rc

mount: report unmount failures
doc: ChangeLog entry for the lost reload fix
2026-10-12 10:12:32 +00:00 · 2026-10-12 09:38:08 +02:00 · 2026-09-27 18:56:03 +02:00 · 2026-09-27 18:41:05 +02:00 · 2026-09-27 18:00:13 +02:00 · 2026-09-27 17:58:33 +02:00
256 changed files with 28174 additions and 2852 deletions
@@ -20,7 +20,6 @@ Please take care to ensure you follow the project coding style and the
 commit message format.  If you follow these recommendations you help
 the maintainer(s) and make it easier for them to include your code.
 Coding Style
 ------------
@@ -31,8 +30,7 @@ First of all, lines are allowed to be longer than 72 characters these
 days.  In fact, there exist no enforced maximum, but keeping it around
 100 chars is OK.
-The coding style itself is strictly Linux [KNF][].
+The coding style itself is strictly [Linux coding style][KNF].
 Commit Messages
 ---------------
@@ -41,31 +39,38 @@ Commit messages exist to track *why* a change was made.  Try to be as
 clear and concise as possible in your commit messages, and always, be
 proud of your work and set up a proper GIT identity for your commits:
-    git config --global user.name "Jane Doe"
+```bash
-    git config --global user.email jane.doe@example.com
+$ git config --global user.name "Jane Doe"
 $ git config --global user.email jane.doe@example.com
 ```
 Example commit message from the [Pro Git][gitbook] online book, notice
 how `git commit -s` is used to automatically add a `Signed-off-by`:
-    Brief, but clear and concise summary of changes
+```
-    
+Brief, but clear and concise summary of changes
    More detailed explanatory text, if necessary.  Wrap it to about 72
    characters or so.  In some contexts, the first line is treated as
    the subject of an email and the rest of the text as the body.  The
    blank line separating the ummary from the body is critical (unless
    you omit the body entirely); tools like rebase can get confused if
    you run the two together.
    Further paragraphs come after blank lines.
     - Bullet points are okay, too
     - Typically a hyphen or asterisk is used for the bullet, preceded
       by a single space, with blank lines in between, but conventions
       vary here
    Signed-off-by: Jane Doe <jane.doe@example.com>
 More detailed explanatory text, if necessary.  Remember, a future
 reader has the diff and can see what it does, the commit message in
 itself should usually talk about the *why* of a change and/or any
 technical limitations and future work.
 Wrap the text to about 72 characters or so.  In some contexts, the
 first line is treated as the subject of an email and the rest of the
 text as the body.  The blank line separating the summary from the body
 is critical (unless you omit the body entirely); tools like rebase can
 get confused if you run the two together.
 Further paragraphs come after blank lines.
 - Bullet points are okay, too
 - Typically a hyphen or asterisk is used for the bullet, preceded
   by a single space, with blank lines in between, but conventions
   vary here
 Signed-off-by: Jane Doe <jane.doe@example.com>
 ```
 Code of Conduct
 ---------------
@@ -73,7 +78,6 @@ Code of Conduct
 It is expected of everyone engaging in the project to, in the words of
 Bill & Ted; [be excellent to each other][conduct].
-
+[KNF]:      https://www.kernel.org/doc/html/v5.8/process/coding-style.html
-[KNF]:      https://en.wikipedia.org/wiki/Kernel_Normal_Form
+[gitbook]:  https://git-scm.com/book/en/v2/Distributed-Git-Contributing-to-a-Project#_commit_guidelines
 [gitbook]:  https://git-scm.com/book/ch5-2.html
 [conduct]:  CODE-OF-CONDUCT.md
@@ -0,0 +1,29 @@
 #!/bin/sh
 #
 # Extract the topmost release entry from doc/ChangeLog.md and unwrap
 # its paragraphs, so the GitHub releases page can wrap them to the
 # browser width instead of showing the hard 72-column breaks.
 #
 # Usage: .github/scripts/extract-changelog.sh < doc/ChangeLog.md > release.md
 #
 set -e
 # The entry sits between the first two underlines, minus the blank
 # line separating it from the next heading.
 awk '/^-----*$/{if (x == 1) exit; x=1;next}x' | head -n -1 |
 # Blank lines, headings, blockquotes, tables, and list items (at any
 # indent) start a new block, everything else continues the current one.
 awk '
 function flush() { if (buf) print buf; buf = "" }
 {
    if (/^$/) { flush(); print; blank = 1; next }
    if (/^ *([-*] |[0-9]+\. |[>#|])/ || blank || !buf || brk)
        { flush(); buf = $0 }
    else
        { sub(/^ +/, ""); buf = buf " " $0 }
    blank = 0
    brk = /  $/
 }
 END { flush() }
 '
@@ -18,6 +18,71 @@ concurrency:
  cancel-in-progress: true
 jobs:
  fuzz:
    name: fuzz
    runs-on: ubuntu-latest
    if: github.event_name != 'push' || github.ref == 'refs/heads/master'
    steps:
      - name: Install dependencies
        run: |
          sudo apt-get -y update
          sudo apt-get -y install pkg-config libconfuse-dev clang libblkid-dev
          # clang picks the newest gcc tree it finds and needs the
          # matching libstdc++ headers to link the fuzzer runtime
          sudo apt-get -y install libstdc++-14-dev || true
          wget https://github.com/troglobit/libuev/releases/download/v2.4.1/libuev-2.4.1.tar.xz
          wget https://github.com/troglobit/libite/releases/download/v2.6.2/libite-2.6.2.tar.gz
          tar xf libuev-2.4.1.tar.xz
          tar xf libite-2.6.2.tar.gz
          (cd libuev-2.4.1 && ./configure && make -j9 && sudo make install-strip)
          (cd libite-2.6.2 && ./configure && make -j9 && sudo make install-strip)
          sudo ldconfig
      - uses: actions/checkout@v7
      - name: Configure
        run: |
          ./autogen.sh
          ./configure --prefix=/usr --exec-prefix= --sysconfdir=/etc --localstatedir=/var
      - name: Build fuzz target
        run: |
          clang -fsanitize=fuzzer,address -DLINK_FUZZ_LIBFUZZER -D_GNU_SOURCE \
                -I libink -I . -o fuzz-msg-parse                              \
                test/src/fuzz-msg-parse.c libink/*.c
      # Restores the newest corpus and saves a fresh one, since a cache
      # entry is immutable once written.  Caches made on a branch are
      # private to it, so the corpus that accumulates on master is what
      # pull requests start from, rather than nothing.
      - name: Restore corpus
        uses: actions/cache@v6
        with:
          path: .fuzz-corpus
          key: fuzz-corpus-${{ github.run_id }}
          restore-keys: fuzz-corpus-
      - name: Fuzz
        run: |
          mkdir -p .fuzz-corpus
          ./fuzz-msg-parse .fuzz-corpus -max_total_time=120 -max_len=4096 \
                           -print_final_stats=1
      # Without this the corpus only ever grows, and most of what it
      # accumulates reaches code some earlier input already reached.
      - name: Minimise corpus
        if: always()
        run: |
          mkdir -p .fuzz-corpus-min
          ./fuzz-msg-parse -merge=1 .fuzz-corpus-min .fuzz-corpus
          rm -rf .fuzz-corpus
          mv .fuzz-corpus-min .fuzz-corpus
          echo "corpus: $(ls .fuzz-corpus | wc -l) inputs"
      - name: Upload crashers
        if: failure()
        uses: actions/upload-artifact@v7
        with:
          name: fuzz-crashers
          path: |
            crash-*
            leak-*
            timeout-*
          if-no-files-found: ignore
  build:
    # Verify we can build on latest Ubuntu with both gcc and clang
    name: ${{ matrix.compiler }}
@@ -34,8 +99,7 @@ jobs:
      - name: Install dependencies
        run: |
          sudo apt-get -y update
-          sudo apt-get -y install pkg-config tree jq libcap-dev
+          sudo apt-get -y install pkg-config tree jq libcap-dev libconfuse-dev libblkid-dev libpam0g-dev
          sudo apt-get -y install pkg-config
          wget https://github.com/troglobit/libuev/releases/download/v2.4.1/libuev-2.4.1.tar.xz
          wget https://github.com/troglobit/libite/releases/download/v2.6.2/libite-2.6.2.tar.gz
          tar xf libuev-2.4.1.tar.xz
@@ -43,7 +107,7 @@ jobs:
          (cd libuev-2.4.1 && ./configure && make -j9 && sudo make install-strip)
          (cd libite-2.6.2 && ./configure && make -j9 && sudo make install-strip)
          sudo ldconfig
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v7
      - name: Static Finit
        run: |
          ./autogen.sh
@@ -52,8 +116,7 @@ jobs:
      - name: Regular Finit
        run: |
          ./configure --prefix=/usr --exec-prefix= --sysconfdir=/etc --localstatedir=/var \
-                      --enable-x11-common-plugin --enable-testserv-plugin --with-watchdog \
+                      --enable-x11-common-plugin --enable-testserv-plugin \
                      --with-keventd --with-libsystemd \
                      CFLAGS="-fsanitize=address -ggdb"
          make -j9 clean
          make -j9 V=1
@@ -81,7 +144,46 @@ jobs:
          make -j1 check || (cat test/test-suite.log; false)
      - name: Upload Test Results
        if: always()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
        with:
          name: finit-test-${{ matrix.compiler }}
          path: test/*.log
  no-dbus:
    # The D-Bus support is default-enabled, so the HAVE_DBUS paths in
    # initctl and finit only bit-rot silently without this leg.
    name: no-dbus
    runs-on: ubuntu-latest
    if: github.event_name != 'push' || github.ref == 'refs/heads/master'
    steps:
      - name: Install dependencies
        run: |
          sudo apt-get -y update
          sudo apt-get -y install pkg-config tree jq libcap-dev libconfuse-dev libblkid-dev
          wget https://github.com/troglobit/libuev/releases/download/v2.4.1/libuev-2.4.1.tar.xz
          wget https://github.com/troglobit/libite/releases/download/v2.6.2/libite-2.6.2.tar.gz
          tar xf libuev-2.4.1.tar.xz
          tar xf libite-2.6.2.tar.gz
          (cd libuev-2.4.1 && ./configure && make -j9 && sudo make install-strip)
          (cd libite-2.6.2 && ./configure && make -j9 && sudo make install-strip)
          sudo ldconfig
      - uses: actions/checkout@v7
      - name: Build without D-Bus
        run: |
          ./autogen.sh
          ./configure --prefix=/usr --exec-prefix= --sysconfdir=/etc --localstatedir=/var \
                      --disable-dbus --enable-testserv-plugin
          make -j9 V=1
      - name: Verify no bus artifacts
        run: |
          DESTDIR=/tmp make install-strip
          ! strings /tmp/sbin/initctl | grep -q finit/bus
          ! strings /tmp/sbin/finit   | grep -q org.finit
      - name: Enable unprivileged userns (unshare)
        run: |
          sudo sysctl kernel.apparmor_restrict_unprivileged_userns=0
      - name: Smoke test
        run: |
          make -C test setup-chroot
          make -j1 -C test check TESTS='start-stop-serv.sh' \
              || (cat test/test-suite.log; false)
@@ -19,7 +19,7 @@ jobs:
  coverity:
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v7
      - name: Fetch latest Coverity Scan MD5
        id: var
        env:
@@ -29,7 +29,7 @@ jobs:
               --post-data "token=$TOKEN&project=${COVERITY_PROJ}&md5=1" \
               -O coverity-latest.tar.gz.md5
          echo "md5=$(cat coverity-latest.tar.gz.md5)" | tee -a $GITHUB_OUTPUT
-      - uses: actions/cache@v4
+      - uses: actions/cache@v6
        id: cache
        with:
          path: coverity-latest.tar.gz
@@ -55,7 +55,7 @@ jobs:
      - name: Install dependencies
        run: |
          sudo apt-get -y update
-          sudo apt-get -y install pkg-config libcap-dev
+          sudo apt-get -y install pkg-config libcap-dev libconfuse-dev libblkid-dev
          wget https://github.com/troglobit/libuev/releases/download/v2.4.1/libuev-2.4.1.tar.xz
          wget https://github.com/troglobit/libite/releases/download/v2.6.2/libite-2.6.2.tar.gz
          tar xf libuev-2.4.1.tar.xz
@@ -66,8 +66,7 @@ jobs:
      - name: Configure
        run: |
          ./autogen.sh
-          ./configure --prefix= --enable-x11-common-plugin --with-watchdog \
+          ./configure --prefix= --enable-x11-common-plugin
                      --with-keventd --with-libsystemd
      - name: Build
        run: |
          export PATH=`pwd`/coverity/bin:$PATH
@@ -86,7 +85,7 @@ jobs:
            --form description="${PROJECT_NAME} $(git rev-parse HEAD)" \
            https://scan.coverity.com/builds?project=${COVERITY_PROJ}
      - name: Upload build.log
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
        with:
          name: coverity-build.log
          path: cov-int/build-log.txt
@@ -4,10 +4,12 @@ on:
  push:
    branches:
      - master
      - 4.x
    paths:
      - 'doc/**'
      - 'README.md'
      - 'mkdocs.yml'
      - 'configure.ac'
      - '.github/workflows/docs.yml'
  pull_request:
    types: [opened, synchronize, reopened, labeled]
@@ -15,6 +17,7 @@ on:
      - 'doc/**'
      - 'README.md'
      - 'mkdocs.yml'
      - 'configure.ac'
      - '.github/workflows/docs.yml'
 permissions:
@@ -23,14 +26,23 @@ permissions:
 jobs:
  build:
    runs-on: ubuntu-latest
    outputs:
      version: ${{ steps.version.outputs.version }}
    steps:
      - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v7
        with:
          fetch-depth: 0  # Needed for git-revision-date-localized plugin
      - name: Determine docs version
        id: version
        run: |
          version=$(sed -n 's/^AC_INIT(\[Finit\], *\[\([0-9]*\)\..*/\1.x/p' configure.ac)
          test -n "$version"
          echo "version=$version" >> $GITHUB_OUTPUT
      - name: Setup Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v7
        with:
          python-version: '3.x'
@@ -46,25 +58,27 @@ jobs:
        run: mkdocs build --clean
      - name: Upload site artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
        with:
          name: site
          path: site/
  deploy:
-    if: github.ref == 'refs/heads/master' && github.event_name == 'push'
+    if: github.event_name == 'push'
    needs: build
    runs-on: ubuntu-latest
    env:
      VERSION: ${{ needs.build.outputs.version }}
    steps:
      - name: Download site artifact
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v8
        with:
          name: site
          path: site/
      - name: Checkout pages repo
-        uses: actions/checkout@v4
+        uses: actions/checkout@v7
        with:
          repository: finit-project/finit-project.github.io
          path: pages
@@ -79,7 +93,56 @@ jobs:
      - name: Sync site to pages repo
        run: |
-          rsync -a --delete --exclude .git site/ pages/
+          rsync -a --delete site/ "pages/$VERSION/"
      - name: Update version index and redirects
        run: |
          cd pages/
          # The root holds only version directories and the files
          # generated below, drop anything else (pre-versioned site)
          find . -maxdepth 1 ! -name . ! -name .git ! -name CNAME \
               ! -name '[0-9]*.x' -exec rm -rf {} +
          latest=$(ls -d [0-9]*.x | sort -rV | head -1)
          sep=
          printf '[' > versions.json
          for v in $(ls -d [0-9]*.x | sort -rV); do
              printf '%s{"version": "%s", "title": "%s", "aliases": []}' \
                     "$sep" "$v" "$v" >> versions.json
              sep=', '
          done
          printf ']\n' >> versions.json
          cat > index.html <<EOF
          <!DOCTYPE html>
          <html>
            <head>
              <meta charset="utf-8">
              <meta http-equiv="refresh" content="0; url=$latest/">
              <link rel="canonical" href="https://finit-project.github.io/$latest/">
            </head>
          </html>
          EOF
          cat > 404.html <<EOF
          <!DOCTYPE html>
          <html>
            <head>
              <meta charset="utf-8">
              <title>Finit &mdash; page not found</title>
              <script>
                var path = window.location.pathname;
                if (!/^\/[0-9]+\.x(\/|$)/.test(path))
                  window.location.replace("/$latest" + path);
              </script>
            </head>
            <body>
              <p>Page not found.  Try the <a href="/$latest/">latest User Guide</a>.</p>
            </body>
          </html>
          EOF
      - name: Commit and push
        run: |
@@ -14,11 +14,11 @@ jobs:
    if: startsWith(github.ref, 'refs/tags/')
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v7
      - name: Installing dependencies ...
        run: |
          sudo apt-get -y update
-          sudo apt-get -y install pkg-config jq libcap-dev
+          sudo apt-get -y install pkg-config jq libcap-dev libconfuse-dev libblkid-dev
          wget https://github.com/troglobit/libuev/releases/download/v2.4.1/libuev-2.4.1.tar.xz
          wget https://github.com/troglobit/libite/releases/download/v2.6.2/libite-2.6.2.tar.gz
          tar xf libuev-2.4.1.tar.xz
@@ -46,8 +46,7 @@ jobs:
          ./autogen.sh
          ./configure  --prefix=/usr --exec-prefix= --sysconfdir=/etc  \
                       --localstatedir=/var --enable-x11-common-plugin \
-                       --enable-testserv-plugin --with-watchdog        \
+                       --enable-testserv-plugin
                       --with-keventd --with-libsystemd
      - name: Enable unprivileged userns (unshare)
        run: |
          sudo sysctl kernel.apparmor_restrict_unprivileged_userns=0
@@ -61,17 +60,16 @@ jobs:
          make -j1 release || (cat $dir/test/test-suite.log; false)
          ls -lF ../
          mkdir -p artifacts/
-          mv ../*.tar.* artifacts/
+          mv ../*.tar.gz artifacts/
      - name: Upload Test Results
        if: always()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
        with:
          name: finit-release-test-logs
          path: finit-*/_build/sub/test/*.log
      - name: Extract ChangeLog entry ...
        run: |
-          awk '/-----*/{if (x == 1) exit; x=1;next}x' doc/ChangeLog.md \
+          .github/scripts/extract-changelog.sh < doc/ChangeLog.md > release.md
              |head -n -1 > release.md
          cat release.md
      - uses: ncipollo/release-action@v1
        with:
@@ -16,7 +16,7 @@ jobs:
    outputs:
      run: ${{ steps.schedule.outputs.run }}
    steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v7
      - name: Check for any commits since last week
        id: schedule
        run: |
@@ -34,7 +34,7 @@ jobs:
      - name: Install dependencies
        run: |
          sudo apt-get -y update
-          sudo apt-get -y install pkg-config jq libcap-dev
+          sudo apt-get -y install pkg-config jq libcap-dev libconfuse-dev libblkid-dev
          wget https://github.com/troglobit/libuev/releases/download/v2.4.1/libuev-2.4.1.tar.xz
          wget https://github.com/troglobit/libite/releases/download/v2.6.2/libite-2.6.2.tar.gz
          tar xf libuev-2.4.1.tar.xz
@@ -42,7 +42,7 @@ jobs:
          (cd libuev-2.4.1 && ./configure && make -j9 && sudo make install-strip)
          (cd libite-2.6.2 && ./configure && make -j9 && sudo make install-strip)
          sudo ldconfig
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v7
      - name: Base run
        run: |
          ./autogen.sh
@@ -61,7 +61,7 @@ jobs:
          make -j1 distcheck || (cat $dir/test/test-suite.log; false)
      - name: Upload Test Results
        if: always()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
        with:
          name: finit-weekly-test-logs
          path: finit-*/_build/sub/test/*.log
@@ -52,3 +52,8 @@ GTAGS
 # VS Code user settings
 .vscode
 # Fuzzing: the target is built by hand with clang, see doc/build.md,
 # and the corpus it grows is a local artefact, not something to ship
 /fuzz-msg-parse
 /.fuzz-corpus/
@@ -1,5 +1,21 @@
 ACLOCAL_AMFLAGS    = -I m4
-SUBDIRS            = man plugins src system tmpfiles.d
+
 # libink must precede src in SUBDIRS because finit links against
 # libink at build time.  Automake recurses subdirs strictly in
 # declaration order, so the typical "explicit dependency" pattern
 # (foo: bar) doesn't help here — ordering is the only thing that
 # does.  libsystemd is consumed by test/serv only, so its position
 # after src is fine.
 SUBDIRS            = man plugins
 if DBUS
 SUBDIRS           += libink dbus-1
 endif
 SUBDIRS           += src system tmpfiles.d
 if KEVENTD
 SUBDIRS           += keventd
 endif
 dist_doc_DATA      = README.md LICENSE contrib/finit.conf
 if CONTRIB
@@ -24,23 +40,20 @@ endif
 install-dev:
 	@make -C src install-pkgincludeHEADERS
 # The fuzz target is built by hand with clang (doc/build.md), so it is
 # not in any _PROGRAMS and nothing else would clear it or the corpus
 # it grows.
 distclean-local:
 	-rm -f  $(top_builddir)/fuzz-msg-parse
 	-rm -rf $(top_builddir)/.fuzz-corpus
 # Target to run when building a release
 release: distcheck
 	@for file in $(DIST_ARCHIVES); do		\
 		md5sum $$file > ../$$file.md5;		\
 		sha256sum $$file > ../$$file.sha256;	\
 	done
 	@mv $(DIST_ARCHIVES) ../
 	@echo
-	@echo "Resulting release files:"
+	@echo "Resulting release tarball(s): $(DIST_ARCHIVES)"
 	@echo "================================================================="
 	@for file in $(DIST_ARCHIVES); do					\
 		printf "$$file    \tDistribution tarball\n";			\
 		printf "$$file.md5\t";    cat ../$$file.md5    | cut -f1 -d' ';	\
 		printf "$$file.sha256\t"; cat ../$$file.sha256 | cut -f1 -d' ';	\
 	done
-DISTCHECK_CONFIGURE_FLAGS = --prefix=/usr --sysconfdir=/etc --localstatedir=/var   \
+DISTCHECK_CONFIGURE_FLAGS = --prefix=/usr --sysconfdir=/etc --localstatedir=/var \
-			    --enable-testserv-plugin --enable-x11-common-plugin    \
+			    --enable-testserv-plugin --enable-x11-common-plugin  \
-			    --with-watchdog --with-keventd --with-fstab=/etc/fstab \
+			    --with-fstab=/etc/fstab --with-libsystemd            \
-			    --with-libsystemd --with-bash-completion-dir=no
+			    --with-bash-completion-dir=no
@@ -1,4 +1,4 @@
-AC_INIT([Finit], [4.16], [https://github.com/finit-project/finit/issues],
+AC_INIT([Finit], [5.0-rc1], [https://github.com/finit-project/finit/issues],
 	[finit], [https://http://finit-project.github.io/])
 AC_CONFIG_AUX_DIR(aux)
 AM_INIT_AUTOMAKE([1.11 foreign subdir-objects])
@@ -12,10 +12,13 @@ AC_CONFIG_FILES([Makefile
 	contrib/debian/Makefile contrib/debian/finit.d/Makefile contrib/debian/finit.d/available/Makefile
 	contrib/void/Makefile   contrib/void/finit.d/Makefile   contrib/void/finit.d/available/Makefile
 	doc/Makefile doc/config/Makefile
 	dbus-1/Makefile
 	libink/Makefile
 	libsystemd/Makefile libsystemd/libsystemd.pc
 	man/Makefile
 	plugins/Makefile
 	src/Makefile
 	keventd/Makefile
 	system/Makefile system/10-hotplug.conf
 	test/test.env test/Makefile
 	test/lib/Makefile test/src/Makefile
@@ -37,7 +40,7 @@ AC_PROG_MKDIR_P
 # Configuration.
 AC_CHECK_HEADERS([termios.h sys/ioctl.h mntent.h sys/sysmacros.h])
-AC_CHECK_FUNCS([strstr getopt getmntent getmntent_r])
+AC_CHECK_FUNCS([strstr getopt getmntent getmntent_r close_range])
 # Check for uint[8,16,32]_t
 AC_TYPE_UINT8_T
@@ -50,6 +53,12 @@ PKG_PROG_PKG_CONFIG
 # Check for required libraries
 PKG_CHECK_MODULES([uev],  [libuev >= 2.4.1])
 PKG_CHECK_MODULES([lite], [libite >= 2.6.1])
 # 3.3 is the floor: CFGF_KEYSTRVAL, which environment {} and the
 # free-form cgroup keys are built on, does not exist before it.  3.3
 # parses both correctly.  Two workarounds hang off this number, the
 # spurious KEYSTRVAL warning and cfg_parse_buf() losing the file name
 # of a template; grep the XXX notes in src/conf.c before raising it.
 PKG_CHECK_MODULES([confuse], [libconfuse >= 3.3])
 # Check for configured Finit features
 AC_ARG_ENABLE(auto_reload,
@@ -76,6 +85,11 @@ AC_ARG_ENABLE(libcap,
        AS_HELP_STRING([--disable-libcap], [Disable Linux capabilities support]),,[
 				enable_libcap=yes])
 AC_ARG_ENABLE(pam,
        AS_HELP_STRING([--disable-pam], [Disable PAM session support for services]),
        [pam_explicit=yes],
        [enable_pam=yes])
 AC_ARG_ENABLE(redirect,
        AS_HELP_STRING([--disable-redirect], [Disable redirection of service output to /dev/null]),,[
 	enable_redirect=yes])
@@ -88,6 +102,10 @@ AC_ARG_ENABLE(logrotate,
        AS_HELP_STRING([--disable-logrotate], [Disable built-in rotation of /var/log/wtmp]),,[
 	enable_logrotate=yes])
 AC_ARG_ENABLE(dbus,
        AS_HELP_STRING([--disable-dbus], [Disable D-Bus support (libink + Finit object tree)]),,[
 	enable_dbus=yes])
 AC_ARG_ENABLE(doc,
        AS_HELP_STRING([--disable-doc], [Disable build and install of doc/ section]),,[
 	enable_doc=yes])
@@ -105,17 +123,18 @@ AC_ARG_ENABLE(all_plugins,
    AS_HELP_STRING([--enable-all-plugins], [Enable all plugins, default: auto]),
 	enable_all_plugins=$enableval, enable_all_plugins=auto)
 AC_PLUGIN([alsa-utils],    [no],  [Save and restore ALSA sound settings using alsactl])
-AC_PLUGIN([dbus],          [no],  [Setup and start system message bus, D-Bus])
+AC_PLUGIN([dbus],          [yes], [Setup and start system message bus, D-Bus])
 AC_PLUGIN([modules-load],  [no],  [Scans /etc/modules-load.d for modules to load])
 AC_PLUGIN([modprobe],      [no],  [Coldplug modules using modalias magic])
 AC_PLUGIN([resolvconf],    [no],  [Setup necessary files for resolvconf])
 AC_PLUGIN([x11-common],    [no],  [Console setup (for X)])
 AC_PLUGIN([netlink],       [yes], [Basic netlink plugin for IFUP/IFDN and GW events. Can be replaced with externally built plugin that links with libnl or similar.])
 AC_PLUGIN([hook-scripts],  [no],  [Trigger script execution from hook points])
-AC_PLUGIN([hotplug],       [yes], [Start udevd or mdev kernel event datamon])
+AC_PLUGIN([hotplug],       [no],  [Start udevd or mdev kernel event datamon])
 AC_PLUGIN([rtc],           [yes], [Save and restore RTC using hwclock])
 AC_PLUGIN([tty],           [yes], [Automatically activate new TTYs, e.g. USB-to-serial])
 AC_PLUGIN([urandom],       [yes], [Setup and save random seed at boot/shutdown])
 AC_PLUGIN([plymouth],      [no],  [Plymouth boot splash integration])
 AC_PLUGIN([testserv],      [no],  [Test plugin to start test serv daemon])
 # Check for extra arguments or packages
@@ -148,7 +167,7 @@ AC_ARG_WITH(sysconfig,
 	[sysconfig=$withval], [sysconfig=default])
 AC_ARG_WITH(group,
-	AS_HELP_STRING([--with-group=NAME], [Group for /run/finit/socket (initctl), default: root]),
+	AS_HELP_STRING([--with-group=NAME], [Group for /run/finit/socket and /run/finit/bus, default: root]),
 	[group=$withval], [group=root])
 AC_ARG_WITH(hostname,
@@ -164,17 +183,20 @@ AC_ARG_WITH(random-seed,
 	[random_seed=$withval], [random_seed=yes])
 AC_ARG_WITH(keventd,
-        AS_HELP_STRING([--with-keventd], [Enable built-in keventd, default: no]),, [with_keventd=no])
+        AS_HELP_STRING([--with-keventd], [Enable built-in keventd device manager, default: yes]),, [with_keventd=yes])
 AC_ARG_WITH(udev-rules,
        AS_HELP_STRING([--without-udev-rules], [Skip install of curated udev rules under /lib/udev/rules.d, default: yes when keventd enabled]),, [with_udev_rules=yes])
 AC_ARG_WITH(sulogin,
-        AS_HELP_STRING([--with-sulogin@<:@=USER@:>@], [Enable built-in sulogin, optional USER to request password for (default root), default: no.]),[sulogin=$withval],[with_sulogin=no])
+        AS_HELP_STRING([--with-sulogin@<:@=USER@:>@], [Built-in sulogin, optional USER to request password for, default: yes (root)]),[sulogin=$withval],[with_sulogin=yes sulogin=yes])
 AC_ARG_WITH(watchdog,
-        AS_HELP_STRING([--with-watchdog@<:@=DEV@:>@], [Enable built-in watchdog, default: /dev/watchdog]),
+        AS_HELP_STRING([--with-watchdog@<:@=DEV@:>@], [Built-in watchdog, default: yes (/dev/watchdog)]),
-	[watchdog=$withval], [with_watchdog=no watchdog=])
+	[watchdog=$withval], [with_watchdog=yes watchdog=yes])
 AC_ARG_WITH(libsystemd,
-        AS_HELP_STRING([--with-libsystemd], [Build replacement libsystemd library, default: yes]),
+        AS_HELP_STRING([--with-libsystemd], [Build replacement libsystemd library, default: no]),
 	[with_libsystemd=$withval], [with_libsystemd=no])
 AC_ARG_WITH(hook-scripts-path,
@@ -218,6 +240,26 @@ AS_IF([test "x$enable_libcap" = "xyes"], [
 	])
 ])
 AS_IF([test "x$enable_pam" = "xyes"], [
 	AS_IF([test "x$enable_static" = "xyes"], [
 		AS_IF([test "x$pam_explicit" = "xyes"], [
 			AC_MSG_ERROR([--enable-pam does not work with --enable-static, PAM dlopen()s its modules])], [
 			AC_MSG_NOTICE([PAM disabled for static build, PAM dlopen()s its modules])
 			enable_pam=no])])
 ])
 AS_IF([test "x$enable_pam" = "xyes"], [
 	AC_CHECK_HEADER([security/pam_appl.h], [], [
 		AC_MSG_WARN([PAM headers not found, PAM support disabled])
 		enable_pam=no])
 	AS_IF([test "x$enable_pam" = "xyes"], [
 		AC_CHECK_LIB([pam], [pam_start], [
 			AC_DEFINE(HAVE_LIBPAM, 1, [Have Linux-PAM for per-service session support])
 			LIBS="$LIBS -lpam"
 		], [
 			AC_MSG_WARN([libpam not found, PAM support disabled])
 			enable_pam=no])])
 ])
 AS_IF([test "x$enable_fastboot" = "xyes"], [
 	AC_DEFINE(FAST_BOOT, 1, [Skip fsck check on filesystems listed in /etc/fstab])])
@@ -236,6 +278,12 @@ AS_IF([test "x$enable_rescue" != "xno"], [
 AM_CONDITIONAL(LOGROTATE, [test "x$enable_logrotate" = "xyes"])
 AS_IF([test "x$enable_dbus" = "xyes"], [
 	AC_DEFINE(HAVE_DBUS, 1, [Build D-Bus support via libink])])
 AM_CONDITIONAL(DBUS, [test "x$enable_dbus" = "xyes"])
 AM_CONDITIONAL(PAM, [test "x$enable_pam" = "xyes"])
 ### With features ##############################################################################
 AS_IF([test "x$bash_dir" = "xyes"], [
 	PKG_CHECK_MODULES([BASH_COMPLETION], [bash-completion >= 2.0],
@@ -281,7 +329,7 @@ AS_IF([test "x$with_heading" != "xno"], [
 AS_IF([test "x$with_group" != "xno"], [
 	AS_IF([test "x$group" = "xyes"], [
 		group=root])])
-AC_DEFINE_UNQUOTED(DEFGROUP, "$group", [For /run/finit/socket])
+AC_DEFINE_UNQUOTED(DEFGROUP, "$group", [For /run/finit/socket and /run/finit/bus])
 AS_IF([test "x$with_hostname" != "xno"], [
 	AS_IF([test "x$hostname" = "xyes"], [
@@ -311,7 +359,11 @@ AS_IF([test "x$rtc_file" != "xno"], [
 	AC_DEFINE_UNQUOTED(RTC_FILE, "$rtcfile_path", [Save and restore system time from this file if /dev/rtc is missing.])],[
 	AC_DEFINE_UNQUOTED(RTC_FILE, NULL)])
-AS_IF([test "x$with_keventd" != "xno"], [with_keventd=yes])
+AS_IF([test "x$with_keventd" != "xno"], [
 	with_keventd=yes
 	PKG_CHECK_MODULES([blkid], [blkid],, [
 		AC_MSG_ERROR([libblkid (util-linux) is required to build keventd.
 		Install the dev package (e.g. libblkid-dev) or disable keventd with --without-keventd])])])
 AS_IF([test "x$with_sulogin" != "xno"], [
 	AS_IF([test "x$sulogin" = "xyes"], [
@@ -344,6 +396,7 @@ AS_IF([test "x$with_plugin_path" != "xno"], [
 AM_CONDITIONAL(BASH,        [test "x$bash_dir"        != "xno"])
 AM_CONDITIONAL(STATIC,      [test "x$enable_static"    = "xyes"])
 AM_CONDITIONAL(KEVENTD,     [test "x$with_keventd"    != "xno"])
 AM_CONDITIONAL(UDEV_RULES,  [test "x$with_keventd"    != "xno" -a "x$with_udev_rules" != "xno"])
 AM_CONDITIONAL(SULOGIN,     [test "x$with_sulogin"    != "xno"])
 AM_CONDITIONAL(WATCHDOGD,   [test "x$with_watchdog"   != "xno"])
 AM_CONDITIONAL(LIBSYSTEMD,  [test "x$with_libsystemd" != "xno"])
@@ -427,13 +480,15 @@ Optional features:
  Install doc/..........: $enable_doc
  Install contrib/......: $enable_contrib
  Bash completion.......: $bash_completion_dir
-  Built-in keventd......: $with_keventd
+  Built-in keventd......: $with_keventd (blkid: $blkid_LIBS)
  Built-in sulogin......: $with_sulogin $sulogin
  Built-in watchdogd....: $with_watchdog $watchdog
  Built-in logrotate....: $enable_logrotate
  D-Bus support (libink): $enable_dbus
  Replacement libsystemd: $with_libsystemd
  Use cgroup v2.........: $enable_cgroup
  Use libcap............: $enable_libcap
  Use PAM...............: $enable_pam
  Parse kernel cmdline..: $enable_kernel_cmdline
  Keep kernel logging...: $enable_kernel_logging
  Skip fsck check.......: $enable_fastboot
@@ -3,24 +3,34 @@
 ## Runlevel to start after bootstrap, runlevel 'S'
 # Default is 2
-#runlevel 2
+#runlevel = 2
 # Top-level cgroups and their default settings.  All groups mandatory
 # but more can be added, max 8 groups in total currently.  The cgroup
 # 'root' is also available, reserved for RT processes.  Settings are
 # as-is, only one shorthand 'mem.' exists, other than that it's the
 # cgroup v2 controller default names.
-#cgroup init   cpu.weight:100
+#cgroup init   { cpu.weight = 100  }
-#cgroup user   cpu.weight:100
+#cgroup user   { cpu.weight = 100  }
-#cgroup system cpu.weight:9700
+#cgroup system { cpu.weight = 9700 }
 # Task to run if ctrl-alt-del is pressed.  This condition is asserted by
 # Finit upon receiving SIGINT (from the kernel).
-#task <sys/key/ctrlaltdel> [12345789] initctl reboot -- Rebooting system
+#task reboot {
 #	description = "Rebooting system"
 #	runlevel    = "12345789"
 #	conditions  = { "sys/key/ctrlaltdel" }
 #	command     = "initctl reboot"
 #}
 # Task to run if the kernel gets a power fail condition is pressed.
 # Asserted by Finit upon receiving SIGPWR (from the kernel).
-#task <sys/pwr/fail> [12345789] initctl poweroff -- Shutting down system
+#task poweroff {
 #	description = "Shutting down system"
 #	runlevel    = "12345789"
 #	conditions  = { "sys/pwr/fail" }
 #	command     = "initctl poweroff"
 #}
 ## Bootstrap services and tasks
 # Can be listed here or in /etc/finit.d/*.conf
@@ -1,3 +1,9 @@
 # Handle PWR button to shutdown/reboot -- useful in Qemu (virt-manager)
 # Depends on syslogd having started. Redirect any output to log.
-service [2345] <pid/syslogd> log acpid -f -- ACPI daemon
+service acpid {
 	description = "ACPI daemon"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	log { }
 	command     = "acpid -f"
 }
@@ -1 +1,7 @@
-service [2345] <pid/syslogd> env:-/etc/conf.d/crond crond -f -S $CRON_OPTS -- Cron daemon
+service crond {
 	description = "Cron daemon"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	envfile     = "-/etc/conf.d/crond"
 	command     = "crond -f -S $CRON_OPTS"
 }
@@ -1,2 +1,7 @@
 # Start SSH daemon as soon as basic networking comes up
-service [2345] env:-/etc/conf.d/dropbear dropbear -R -F $DROPBEAR_OPTS -- Dropbear SSH daemon
+service dropbear {
 	description = "Dropbear SSH daemon"
 	runlevel    = "2345"
 	envfile     = "-/etc/conf.d/dropbear"
 	command     = "dropbear -R -F $DROPBEAR_OPTS"
 }
@@ -1,5 +1,24 @@
 # Consoles to start getty on when system is up
-tty [12345] /dev/ttyS0 noclear
+tty ttyS0 {
-tty [12345] /dev/tty1  noclear nowait
+	runlevel = "12345"
-tty [2345]  /dev/tty2  noclear nowait
+	device   = "/dev/ttyS0"
-tty [2345]  /dev/tty3  noclear nowait
+	noclear  = true
 }
 tty tty1 {
 	runlevel = "12345"
 	device   = "/dev/tty1"
 	noclear  = true
 	nowait   = true
 }
 tty tty2 {
 	runlevel = "2345"
 	device   = "/dev/tty2"
 	noclear  = true
 	nowait   = true
 }
 tty tty3 {
 	runlevel = "2345"
 	device   = "/dev/tty3"
 	noclear  = true
 	nowait   = true
 }
@@ -1,2 +1,7 @@
 # Oneshot task to run once at bootstrap
-task [S] env:/etc/conf.d/loadkmap zcat $KEYMAP | loadkmap -- Loading keymap
+task keymap {
 	description = "Loading keymap"
 	runlevel    = "S"
 	envfile     = "/etc/conf.d/loadkmap"
 	command     = "zcat $KEYMAP | loadkmap"
 }
@@ -1 +1,5 @@
-service [2345] lxdm -- Lightweight Login Manager
+service lxdm {
 	description = "Lightweight Login Manager"
 	runlevel    = "2345"
 	command     = "lxdm"
 }
@@ -1,7 +1,2 @@
 ## Linux kernel modules to load
-#module fbcon
+#modules = { "fbcon", "button", "evdev", "mousedev", "8139cp", "softdog" }
 #module button
 #module evdev
 #module mousedev
 #module 8139cp
 #module softdog
@@ -1,2 +1,9 @@
 # Busybox ntpd has no option to use syslog when running in foreground
-service [2345] <pid/syslogd> env:-/etc/conf.d/ntpd log ntpd -n $NTPD_OPTS -- NTP daemon
+service ntpd {
 	description = "NTP daemon"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	envfile     = "-/etc/conf.d/ntpd"
 	log { }
 	command     = "ntpd -n $NTPD_OPTS"
 }
@@ -1,4 +1,15 @@
 # Start syslogd as soon as possible, should always run
 # Start klogd as soon as possible, but after syslogd
-service [S12345] env:-/etc/conf.d/syslog syslogd -n $SYSLOGD_OPTS          -- Syslog daemon
+service syslogd {
-service [S12345] <pid/syslogd> env:-/etc/conf.d/klogd klogd -n $KLOGD_OPTS -- Kernel log daemon
+	description = "Syslog daemon"
 	runlevel    = "S12345"
 	envfile     = "-/etc/conf.d/syslog"
 	command     = "syslogd -n $SYSLOGD_OPTS"
 }
 service klogd {
 	description = "Kernel log daemon"
 	runlevel    = "S12345"
 	conditions  = { "pid/syslogd" }
 	envfile     = "-/etc/conf.d/klogd"
 	command     = "klogd -n $KLOGD_OPTS"
 }
@@ -1 +1,6 @@
-service [S123456789] env:-/etc/conf.d/watchdog watchdog $WATCHDOG_OPTS $WATCHDOG_DEV -- System watchdog
+service watchdog {
 	description = "System watchdog"
 	runlevel    = "S123456789"
 	envfile     = "-/etc/conf.d/watchdog"
 	command     = "watchdog $WATCHDOG_OPTS $WATCHDOG_DEV"
 }
@@ -3,24 +3,34 @@
 ## Runlevel to start after bootstrap, runlevel 'S'
 # Default is 2
-#runlevel 2
+#runlevel = 2
 # Top-level cgroups and their default settings.  All groups mandatory
 # but more can be added, max 8 groups in total currently.  The cgroup
 # 'root' is also available, reserved for RT processes.  Settings are
 # as-is, only one shorthand 'mem.' exists, other than that it's the
 # cgroup v2 controller default names.
-#cgroup init   cpu.weight:100
+#cgroup init   { cpu.weight = 100  }
-#cgroup user   cpu.weight:100
+#cgroup user   { cpu.weight = 100  }
-#cgroup system cpu.weight:9700
+#cgroup system { cpu.weight = 9700 }
 # Task to run if ctrl-alt-del is pressed.  This condition is asserted by
 # Finit upon receiving SIGINT (from the kernel).
-#task <sys/key/ctrlaltdel> [12345789] initctl reboot -- Rebooting system
+#task reboot {
 #	description = "Rebooting system"
 #	runlevel    = "12345789"
 #	conditions  = { "sys/key/ctrlaltdel" }
 #	command     = "initctl reboot"
 #}
 # Task to run if the kernel gets a power fail condition is pressed.
 # Asserted by Finit upon receiving SIGPWR (from the kernel).
-#task <sys/pwr/fail> [12345789] initctl poweroff -- Shutting down system
+#task poweroff {
 #	description = "Shutting down system"
 #	runlevel    = "12345789"
 #	conditions  = { "sys/pwr/fail" }
 #	command     = "initctl poweroff"
 #}
 ## Bootstrap services and tasks
 # Can be listed here or in /etc/finit.d/*.conf
@@ -1,3 +1,10 @@
 # Handle PWR button to shutdown/reboot -- useful in Qemu (virt-manager)
 # Depends on a syslog daemon having started. Redirect any output to log.
-service [2345] <pid/syslogd> env:-/etc/default/acpid log acpid -f $OPTIONS -- ACPI daemon
+service acpid {
 	description = "ACPI daemon"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	envfile     = "-/etc/default/acpid"
 	log { }
 	command     = "acpid -f $OPTIONS"
 }
@@ -1 +1,8 @@
-task [2345] <sys/pwr/ac,pid/syslogd> halt:usr1 env:-/etc/default/anacron anacron -d -q $ANACRON_ARGS -- Anacron jobs
+task anacron {
 	description = "Anacron jobs"
 	runlevel    = "2345"
 	conditions  = { "sys/pwr/ac", "pid/syslogd" }
 	envfile     = "-/etc/default/anacron"
 	stop-signal = "usr1"
 	command     = "anacron -d -q $ANACRON_ARGS"
 }
@@ -1,2 +1,6 @@
-sysv [S] /etc/init.d/apparmor -- AppArmor initialization
+sysv apparmor {
 	description = "AppArmor initialization"
 	runlevel    = "S"
 	command     = "/etc/init.d/apparmor"
 }
@@ -1 +1,6 @@
-service [2345] env:-/etc/default/avahi-daemon avahi-daemon -s $AVAHI_DAEMON_OPTS -- Avahi mDNS/DNS-SD Stack
+service avahi-daemon {
 	description = "Avahi mDNS/DNS-SD Stack"
 	runlevel    = "2345"
 	envfile     = "-/etc/default/avahi-daemon"
 	command     = "avahi-daemon -s $AVAHI_DAEMON_OPTS"
 }
@@ -1,3 +1,9 @@
 # To ignore errors like "org.freedesktop.hostname1", update the env file with
 # "--noplugin=hostname", i.e. append to BLUETOOTHD_OPTS
-service [2345] log:null env:-/etc/default/bluetooth /usr/libexec/bluetooth/bluetoothd -n $BLUETOOTHD_OPTS -- Bluetooth service
+service bluetoothd {
 	description = "Bluetooth service"
 	runlevel    = "2345"
 	envfile     = "-/etc/default/bluetooth"
 	log { file = "/dev/null" }
 	command     = "/usr/libexec/bluetooth/bluetoothd -n $BLUETOOTHD_OPTS"
 }
@@ -1,2 +1,6 @@
 # Oneshot task to run once at bootstrap
-task [S] /lib/console-setup/console-setup.sh -- Setting up console font and keymap
+task console-setup {
 	description = "Setting up console font and keymap"
 	runlevel    = "S"
 	command     = "/lib/console-setup/console-setup.sh"
 }
@@ -1 +1,7 @@
-service [2345] <sys/pwr/ac,pid/syslogd> env:-/etc/default/cron cron -f $EXTRA_OPTS -- Background job processing daemon
+service cron {
 	description = "Background job processing daemon"
 	runlevel    = "2345"
 	conditions  = { "sys/pwr/ac", "pid/syslogd" }
 	envfile     = "-/etc/default/cron"
 	command     = "cron -f $EXTRA_OPTS"
 }
@@ -1,4 +1,9 @@
 # On some systems, bootstrap can be really quick and cause elogind
 # to not start before a user has managed to log in.  To prevent
 # this, add <pid/elogind> as condition to your TTYs in getty.conf
-service [2345] <pid/syslogd> /usr/libexec/elogind -- Login manager
+service elogind {
 	description = "Login manager"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	command     = "/usr/libexec/elogind"
 }
@@ -1,7 +1,38 @@
 # Consoles to start getty on when system is up
-tty [12345] /dev/tty1 linux noclear nowait
+tty tty1 {
-tty [2345]  /dev/tty2 linux nowait
+	runlevel = "12345"
-tty [2345]  /dev/tty3 linux nowait
+	device   = "/dev/tty1"
-tty [2345]  /dev/tty4 linux nowait
+	term     = "linux"
-tty [2345]  /dev/tty5 linux nowait
+	noclear  = true
-tty [2345]  /dev/tty6 linux nowait
+	nowait   = true
 }
 tty tty2 {
 	runlevel = "2345"
 	device   = "/dev/tty2"
 	term     = "linux"
 	nowait   = true
 }
 tty tty3 {
 	runlevel = "2345"
 	device   = "/dev/tty3"
 	term     = "linux"
 	nowait   = true
 }
 tty tty4 {
 	runlevel = "2345"
 	device   = "/dev/tty4"
 	term     = "linux"
 	nowait   = true
 }
 tty tty5 {
 	runlevel = "2345"
 	device   = "/dev/tty5"
 	term     = "linux"
 	nowait   = true
 }
 tty tty6 {
 	runlevel = "2345"
 	device   = "/dev/tty6"
 	term     = "linux"
 	nowait   = true
 }
@@ -1,2 +1,6 @@
 # Oneshot task to run once at bootstrap
-task [S] /lib/console-setup/keyboard-setup.sh -- Setting up console keyboard layout
+task keyboard-setup {
 	description = "Setting up console keyboard layout"
 	runlevel    = "S"
 	command     = "/lib/console-setup/keyboard-setup.sh"
 }
@@ -1 +1,5 @@
-service [3] lightdm -- Light Display Manager
+service lightdm {
 	description = "Light Display Manager"
 	runlevel    = "3"
 	command     = "lightdm"
 }
@@ -1,8 +1,2 @@
 ## Linux kernel modules to load
-#module fbcon
+#modules = { "fbcon", "button", "evdev", "loop", "psmouse", "mousedev", "8139cp" }
 #module button
 #module evdev
 #module loop
 #module psmouse
 #module mousedev
 #module 8139cp
@@ -1,2 +1,6 @@
 # Need to stop plymouth, or it'll block stdin on tty1
-task [S] /usr/bin/plymouth quit -- Stopping Plymouth Boot Screen
+task plymouth {
 	description = "Stopping Plymouth Boot Screen"
 	runlevel    = "S"
 	command     = "/usr/bin/plymouth quit"
 }
@@ -1,3 +1,8 @@
 # Start rsyslogd as soon as possible, should always run
 # Provides pid/syslogd condition
-service [S12345] name:syslogd env:-/etc/default/rsyslog rsyslogd -n $RSYSLOGD_OPTIONS -- Reliable syslog daemon
+service syslogd {
 	description = "Reliable syslog daemon"
 	runlevel    = "S12345"
 	envfile     = "-/etc/default/rsyslog"
 	command     = "rsyslogd -n $RSYSLOGD_OPTIONS"
 }
@@ -1,2 +1,8 @@
 # Simple NTP client (SNTP)
-service [2345] <net/route/default> env:-/etc/default/sntpd sntpd -n $SNTPD_OPTIONS -- SNTP client
+service sntpd {
 	description = "SNTP client"
 	runlevel    = "2345"
 	conditions  = { "net/route/default" }
 	envfile     = "-/etc/default/sntpd"
 	command     = "sntpd -n $SNTPD_OPTIONS"
 }
@@ -1,2 +1,8 @@
 # Start SSH daemon as soon as basic networking comes up
-service [2345] <net/lo/up> env:-/etc/default/ssh /usr/sbin/sshd -D $SSHD_OPTS -- OpenSSH daemon
+service sshd {
 	description = "OpenSSH daemon"
 	runlevel    = "2345"
 	conditions  = { "net/lo/up" }
 	envfile     = "-/etc/default/ssh"
 	command     = "/usr/sbin/sshd -D $SSHD_OPTS"
 }
@@ -1,2 +1,7 @@
 # Start sysklogd as soon as possible, should always run if enabled
-service [S123456789] env:-/etc/default/syslogd syslogd -F $SYSLOGD_OPTIONS -- System logging daemon
+service syslogd {
 	description = "System logging daemon"
 	runlevel    = "S123456789"
 	envfile     = "-/etc/default/syslogd"
 	command     = "syslogd -F $SYSLOGD_OPTIONS"
 }
@@ -1,4 +1,8 @@
 # Here we use XDM since it has few dependencies (relatively speaking).
 # It is also an example of a service without a -- description.
 # service [3] lxdm -- Lightweight Login Manager
-service [3] xdm -nodaemon -- X Display Manager
+service xdm {
 	description = "X Display Manager"
 	runlevel    = "3"
 	command     = "xdm -nodaemon"
 }
@@ -1,85 +1,149 @@
 # Sample finit.conf to demonstrate the syntax
 #
-host testbed
+hostname = "testbed"
 # Linux kernel modules to load
-module button
+modules = { "button", "evdev", "loop", "psmouse" }
 module evdev
 module loop
 module psmouse
 # Top-level cgroups and their default settings.  All groups mandatory
 # but more can be added, max 8 groups in total currently.  The cgroup
 # 'root' is also available, reserved for RT processes.  Settings are
 # as-is, only one shorthand 'mem.' exists, other than that it's the
 # cgroup v2 controller default names.
-cgroup init   cpu.weight:100
+cgroup init   { cpu.weight = 100 }
-cgroup user   cpu.weight:100
+cgroup user   { cpu.weight = 100 }
-cgroup system cpu.weight:9700 cpu.max:50000
+cgroup system { cpu.weight = 9700  cpu.max = 50000 }
 # Example extra cgroup
-cgroup maint  cpu.weight:100
+cgroup maint  { cpu.weight = 100 }
 # Runlevel to start after bootstrap, runlevel 'S'
-runlevel 2
+runlevel = 2
 # Network bringup script
-network service networking start
+network = "service networking start"
 # Max file size for each log file: 100 kiB, rotate max 4 copies:
 # log => log.1 => log.2.gz => log.3.gz => log.4.gz
-log size:100k count:4
+log {
 	size  = 100k
 	count = 4
 }
 # Virtual consoles to start getty on
-tty /dev/tty1
+tty tty1 { device = "/dev/tty1" }
-tty /dev/tty2
+tty tty2 { device = "/dev/tty2" }
-tty /dev/tty3
+tty tty3 { device = "/dev/tty3" }
 # Task to run if ctrl-alt-del is pressed.  This condition is asserted by
 # Finit upon receiving SIGINT (from the kernel).
-task <sys/key/ctrlaltdel> [12345789] initctl reboot -- Rebooting system
+task reboot {
 	description = "Rebooting system"
 	runlevel    = "12345789"
 	conditions  = { "sys/key/ctrlaltdel" }
 	command     = "initctl reboot"
 }
 # Task to run if the kernel gets a power fail condition is pressed.
 # Asserted by Finit upon receiving SIGPWR (from the kernel).
-task <sys/pwr/fail> [12345789] initctl poweroff -- Shutting down system
+task poweroff {
 	description = "Shutting down system"
 	runlevel    = "12345789"
 	conditions  = { "sys/pwr/fail" }
 	command     = "initctl poweroff"
 }
 # Alternative method instead of runparts
-#task [S] /etc/init.d/keyboard-setup start -- Setting up preliminary keymap
+#task keyboard-setup {
-#task [S] /etc/init.d/acpid start          -- Starting ACPI Daemon
+#	description = "Setting up preliminary keymap"
-#task [S] /etc/init.d/kbd start            -- Preparing console
+#	runlevel    = "S"
-#run [2] /etc/init.d/networking start      -- Start networking
+#	command     = "/etc/init.d/keyboard-setup start"
 #}
 #task acpid {
 #	description = "Starting ACPI Daemon"
 #	runlevel    = "S"
 #	command     = "/etc/init.d/acpid start"
 #}
 #task kbd {
 #	description = "Preparing console"
 #	runlevel    = "S"
 #	command     = "/etc/init.d/kbd start"
 #}
 #run networking {
 #	description = "Start networking"
 #	runlevel    = "2"
 #	command     = "/etc/init.d/networking start"
 #}
 # Services to be monitored and respawned as needed
-# klgod and syslogd are placed in the maint cgroup
+# klogd and syslogd are placed in the maint cgroup.  There is no
-cgroup.maint
+# "current cgroup" to switch in this format, every block names its own.
-service [2345] <pid/syslogd> klogd -n     -- Kernel logging server
+service klogd {
-service [2345] syslogd -n                 -- Syslog server
+	description = "Kernel logging server"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	cgroup maint {}
 	command     = "klogd -n"
 }
 service syslogd {
 	description = "Syslog server"
 	runlevel    = "2345"
 	cgroup maint {}
 	command     = "syslogd -n"
 }
-# gdm in the system cgroup (default when read from it's own .conf file)
+# gdm gets its own limits inside the system group, which is where
-cgroup.system
+# services end up when no cgroup block is given.
-service [3] cgroup:cpu.weight:250,mem.max:10M gdm -- GNOME Display Manager
+service gdm {
 	description = "GNOME Display Manager"
 	runlevel    = "3"
 	cgroup system {
 		cpu.weight = 250
 		memory.max = 10M
 	}
 	command     = "gdm"
 }
 # Start SSH daemon with opts from /etc/default/ssh (if available), move
-# to user cgroup with cpu.weight:250.  Default for services is system
+# to user cgroup with cpu.weight 250.  Default weight in the user group
-# group.  Default weight in user group is 100 (above).  Max length of
+# is 100 (above).
-# cgroup argument is (currently) 63 chars.
+service sshd {
-#
+	description = "OpenSSH daemon"
-# Notice alternative syntax where current cgroup is only set for this
+	runlevel    = "2345"
-# particular service.
+	envfile     = "-/etc/default/ssh"
-service [2345] cgroup.user:cpu.weight:250,mem.max:10M env:-/etc/default/ssh /usr/sbin/sshd -D $SSHD_OPTS -- OpenSSH daemon
+	cgroup user {
 		cpu.weight = 250
 		memory.max = 10M
 	}
 	command     = "/usr/sbin/sshd -D $SSHD_OPTS"
 }
 # The BusyBox ntpd does not use syslog when running in the foreground
 # So we use this trick to redirect stdout/stderr to a log file.  The
 # log file is rotated with the above settings.  The condition declares
-# a dependency on a system default route (gateway) to be set.  A single
+# a dependency on a system default route (gateway) to be set.  ntpd
-# <!> at the beginning means ntpd does not respect SIGHUP for restart.
+# does not respect SIGHUP, so Finit restarts it on reload instead.
-service [2345] <!net/route/default> log:/var/log/ntpd.log ntpd -n -l -I eth0 -- NTP daemon
+service ntpd {
 	description   = "NTP daemon"
 	runlevel      = "2345"
 	conditions    = { "net/route/default" }
 	reload-signal = "none"
 	log { file = "/var/log/ntpd.log" }
 	command       = "ntpd -n -l -I eth0"
 }
 # Run start scripts from this directory
-# runparts /etc/start.d
+#runparts = "/etc/start.d"
-# For multiple instances of the same service, add :ID somewhere between
+# For multiple instances of the same service, add :ID to the block title.
-# the service/run/task keyword and the command.
+service httpd:80 {
-service :80   [2345] /sbin/httpd -f -h /http -p 80   -- Web server
+	description = "Web server"
-service :8080 [2345] /sbin/httpd -f -h /http -p 8080 -- Old web server
+	runlevel    = "2345"
 	command     = "/sbin/httpd -f -h /http -p 80"
 }
 service httpd:8080 {
 	description = "Old web server"
 	runlevel    = "2345"
 	command     = "/sbin/httpd -f -h /http -p 8080"
 }
@@ -3,24 +3,34 @@
 ## Runlevel to start after bootstrap, runlevel 'S'
 # Default is 2
-#runlevel 2
+#runlevel = 2
 # Top-level cgroups and their default settings.  All groups mandatory
 # but more can be added, max 8 groups in total currently.  The cgroup
 # 'root' is also available, reserved for RT processes.  Settings are
 # as-is, only one shorthand 'mem.' exists, other than that it's the
 # cgroup v2 controller default names.
-#cgroup init   cpu.weight:100
+#cgroup init   { cpu.weight = 100  }
-#cgroup user   cpu.weight:100
+#cgroup user   { cpu.weight = 100  }
-#cgroup system cpu.weight:9700
+#cgroup system { cpu.weight = 9700 }
 # Task to run if ctrl-alt-del is pressed.  This condition is asserted by
 # Finit upon receiving SIGINT (from the kernel).
-#task <sys/key/ctrlaltdel> [12345789] initctl reboot -- Rebooting system
+#task reboot {
 #	description = "Rebooting system"
 #	runlevel    = "12345789"
 #	conditions  = { "sys/key/ctrlaltdel" }
 #	command     = "initctl reboot"
 #}
 # Task to run if the kernel gets a power fail condition is pressed.
 # Asserted by Finit upon receiving SIGPWR (from the kernel).
-#task <sys/pwr/fail> [12345789] initctl poweroff -- Shutting down system
+#task poweroff {
 #	description = "Shutting down system"
 #	runlevel    = "12345789"
 #	conditions  = { "sys/pwr/fail" }
 #	command     = "initctl poweroff"
 #}
 ## Bootstrap services and tasks
 # Can be listed here or in /etc/finit.d/*.conf
@@ -1,3 +1,7 @@
 # Handle PWR button to shutdown/reboot -- useful in Qemu (virt-manager)
 # Depends on syslogd having started. Redirect any output to log.
-service [2345] acpid -f -- ACPI daemon
+service acpid {
 	description = "ACPI daemon"
 	runlevel    = "2345"
 	command     = "acpid -f"
 }
@@ -1 +1,6 @@
-service [2345] <pid/syslogd> crond -f -S -c /etc/crontabs -- Cron daemon
+service crond {
 	description = "Cron daemon"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	command     = "crond -f -S -c /etc/crontabs"
 }
@@ -1 +1,5 @@
-service [2345] dhcpcd -B -M -- DHCP client
+service dhcpcd {
 	description = "DHCP client"
 	runlevel    = "2345"
 	command     = "dhcpcd -B -M"
 }
@@ -1 +1,5 @@
-service [S12345] dmeventd -f -- Device mapper event daemon
+service dmeventd {
 	description = "Device mapper event daemon"
 	runlevel    = "S12345"
 	command     = "dmeventd -f"
 }
@@ -1,4 +1,19 @@
 # Consoles to start Finit built-in getty on when system is up
-tty [12345] /dev/tty1 noclear nowait
+tty tty1 {
-tty [2345]  /dev/tty2 noclear nowait
+	runlevel = "12345"
-tty [2345]  /dev/tty3 noclear nowait
+	device   = "/dev/tty1"
 	noclear  = true
 	nowait   = true
 }
 tty tty2 {
 	runlevel = "2345"
 	device   = "/dev/tty2"
 	noclear  = true
 	nowait   = true
 }
 tty tty3 {
 	runlevel = "2345"
 	device   = "/dev/tty3"
 	noclear  = true
 	nowait   = true
 }
@@ -1,2 +1,6 @@
 # Oneshot task to run once at bootstrap
-task [S] zcat /etc/keymap/se.bmap.gz | loadkmap -- Loading keymap
+task keymap {
 	description = "Loading keymap"
 	runlevel    = "S"
 	command     = "zcat /etc/keymap/se.bmap.gz | loadkmap"
 }
@@ -1 +1,5 @@
-service [2345] lxdm -- Lightweight Login Manager
+service lxdm {
 	description = "Lightweight Login Manager"
 	runlevel    = "2345"
 	command     = "lxdm"
 }
@@ -1,7 +1,3 @@
 ## Linux kernel modules to load
-#module fbcon
+# Other candidates: fbcon, button, evdev, mousedev, 8139cp
-#module button
+modules = { "softdog" }
 #module evdev
 #module mousedev
 #module 8139cp
 module softdog
@@ -1,2 +1,8 @@
 # Silly Busybox ntpd has no option to use syslog when running in foreground
-service [2345] <pid/syslogd> log ntpd -n -N -p pool.ntp.org -- NTP daemon
+service ntpd {
 	description = "NTP daemon"
 	runlevel    = "2345"
 	conditions  = { "pid/syslogd" }
 	log { }
 	command     = "ntpd -n -N -p pool.ntp.org"
 }
@@ -1,2 +1,6 @@
 # Start SSH daemon as soon as basic networking comes up
-service [2345] /usr/sbin/sshd -D -- OpenSSH daemon
+service sshd {
 	description = "OpenSSH daemon"
 	runlevel    = "2345"
 	command     = "/usr/sbin/sshd -D"
 }
@@ -1,4 +1,13 @@
 # Start syslogd as soon as possible, should always run
 # Start klogd as soon as possible, but after syslogd
-service [S12345] syslogd -n             -- Syslog daemon
+service syslogd {
-service [S12345] <pid/syslogd> klogd -n -- Kernel log daemon
+	description = "Syslog daemon"
 	runlevel    = "S12345"
 	command     = "syslogd -n"
 }
 service klogd {
 	description = "Kernel log daemon"
 	runlevel    = "S12345"
 	conditions  = { "pid/syslogd" }
 	command     = "klogd -n"
 }
@@ -1 +1,7 @@
-service @uuidd:uuidd [2345] uuidd -F -- UUID generation daemon
+service uuidd {
 	description = "UUID generation daemon"
 	runlevel    = "2345"
 	user        = "uuidd"
 	group       = "uuidd"
 	command     = "uuidd -F"
 }
@@ -0,0 +1,2 @@
 /Makefile
 /Makefile.in
@@ -0,0 +1,6 @@
 EXTRA_DIST          = org.finit.conf
 if DBUS
 dbuspolicydir       = $(datadir)/dbus-1/system.d
 dist_dbuspolicy_DATA = org.finit.conf
 endif
@@ -0,0 +1,63 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE busconfig PUBLIC
 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
 <!--
  System-bus policy for finit.
  finit (PID 1, root) owns the `org.finit` well-known name.  The
  policy below lets unprivileged callers introspect, read
  properties, and query service / condition state, but disallows
  every state-changing method at the broker.  finit *also* enforces
  per-method authorisation itself (LINK_METHOD_PRIVILEGED), so
  defense-in-depth: even if a permissive policy is installed by
  mistake, finit rejects unprivileged state changes.  It reads the
  caller from SO_PEERCRED on the local bus, and on the system bus it
  asks the broker who sent each privileged call, via
  GetConnectionUnixUser.
 -->
 <busconfig>
  <!-- Only finit (root) may own the org.finit bus name. -->
  <policy user="root">
    <allow own="org.finit"/>
    <allow send_destination="org.finit"/>
    <allow receive_sender="org.finit"/>
  </policy>
  <!-- Everyone may introspect, read properties, and call the
       read-only Manager1 / Cond1 methods.  Signals fan out
       unconditionally. -->
  <policy context="default">
    <allow send_destination="org.finit"
           send_interface="org.freedesktop.DBus.Introspectable"/>
    <allow send_destination="org.finit"
           send_interface="org.freedesktop.DBus.Peer"/>
    <allow send_destination="org.finit"
           send_interface="org.freedesktop.DBus.Properties"
           send_member="Get"/>
    <allow send_destination="org.finit"
           send_interface="org.freedesktop.DBus.Properties"
           send_member="GetAll"/>
    <allow send_destination="org.finit"
           send_interface="org.finit.Manager1"
           send_member="ListServices"/>
    <allow send_destination="org.finit"
           send_interface="org.finit.Manager1"
           send_member="GetService"/>
    <allow send_destination="org.finit"
           send_interface="org.finit.Cond1"
           send_member="Get"/>
    <allow send_destination="org.finit"
           send_interface="org.finit.Cond1"
           send_member="List"/>
    <allow send_destination="org.finit"
           send_interface="org.finit.Cond1"
           send_member="Dump"/>
    <allow receive_sender="org.finit"/>
  </policy>
 </busconfig>
@@ -3,6 +3,221 @@ Change Log
 All relevant changes are documented in this file.
 [5.0][UNRELEASED]
 --------------------
 ### Changes
 - keventd is now a full device manager, promoted from the power supply
  monitor it was in v4, and the device management defaults have swapped:
  keventd is enabled by default (`--without-keventd` opts out, libblkid is
  required to build it), while the hotplug plugin, which runs an external
  `udevd`, `mdevd`, or `mdev`, is now opt-in.  With the plugin enabled,
  keventd steps back to passive mode and monitors only power supply
  events, as before.  As the system device manager it replaces mdev,
  mdevd, and udevd, and handles:
    * udev rules: an engine covering most of the udev(7) grammar --
      parent-chain matching, `PROGRAM`/`RESULT`, `IMPORT`, `RUN`,
      `GOTO`/`LABEL`, and the standard substitutions -- reading the usual
      `udev/rules.d` directories under `/lib`, `/run`, and `/etc` with
      udev's precedence and masking.  A curated ruleset derived from eudev
      3.2.14 is installed by default, `--without-udev-rules` skips it.
      See [Device Manager](keventd.md) for the supported subset and the
      few deliberate divergences
    * builtins used by the ruleset: `blkid`, `hwdb`, `input_id`, `kmod`,
      `net_id`, `path_id`, and `usb_id`
    * device nodes with per-subsystem default permissions, persistent
      symlinks (`/dev/disk/by-uuid`, `by-label`, `by-id`, `by-path`, plus
      `by-id`/`by-path` for input, serial, sound, v4l, and tape), kernel
      firmware load requests, and module loading from `MODALIAS`
    * predictable network interface names via the eudev ruleset,
      `net.ifnames=0` on the kernel command line keeps classic names.
      **Note:** switching a system over to keventd can rename its NICs
    * coldplug: as device manager keventd starts with `-c`, replaying add
      events for hardware present at boot.  The `pid/keventd` condition
      is deferred until the coldplug queue has drained, so services
      gating on it can assume `/dev` is populated and symlinks are live
    * `keventd -S`, the `udevadm settle` equivalent, asks the running
      daemon over D-Bus and falls back to polling the kernel's uevent
      sequence number
    * libudev compatibility: per-device properties in `/run/udev/data`
      and processed uevents rebroadcast to netlink group 0x4, so
      libudev-zero consumers, e.g. compositors and libinput, see hotplug
      events
    * new conditions for the service engine: `dev/<node>` for device
      nodes, `class/<subsystem>/<name>` for sysfs class devices without a
      node (LEDs, IIO, DSA ports), and `driver/<name>`, asserted while a
      driver is bound to at least one device
 - Generated `/run/finit/system/*.conf` files for bundled services (keventd,
  watchdogd, runparts) are now read before `/lib/finit/system/*.conf` instead
  of after.  Built-ins can now be referenced in `if:` statements from system
  .conf files and overridden by name from both `/lib/finit/system` and
  `/etc/finit.d`, the latter is still always read last
 - The `dbus.so` plugin, which starts an external `dbus-daemon`, is now enabled
  by default.  It does nothing on systems without a `dbus-daemon` installed,
  and `--disable-dbus-plugin` opts out.  The daemon it used to register from C
  now lives in `20-dbus.conf`, and the directories it needs in
  `tmpfiles.d/dbus.conf`, so both can be overridden from `/etc` like any other
  system file.  Those directories are no longer chowned to `messagebus`,
  matching how Finit ships directories for other daemons
 - The bundled `sulogin` and `watchdogd` are now built and installed by
  default, like keventd and the D-Bus support.  `--without-sulogin` and
  `--without-watchdog` opt out.  Note, Finit starts `watchdogd` by itself
  when the WDT device node exists
 - The `tty` block takes `passenv`, which the line-based format has had since
  v4.4 (issue #286) and the block format was missing
 - New `provides` setting for run/task/service/sysv blocks, naming conditions
  the service asserts in addition to its own `pid/<ident>`.  Lets variants of
  one service, qualified with `if`, share the barrier condition downstream
  services wait for, which a block title alone could not express.  Any
  namespace is allowed, and a second claim on the same condition is refused
  with a warning naming the owner
 - The `command` setting in a block takes a list of candidates for the same
  service, `command = { "/lib/systemd/systemd-udevd", "-udevd" }`, and Finit
  starts the first one it finds.  The line-based format could only express
  this by repeating the whole stanza per candidate
 - New `pam = "NAME"` setting for run/task/service/sysv blocks, runs the
  service inside a PAM session set up from `/etc/pam.d/NAME`, so the `session`
  stack applies to the process that becomes the daemon, e.g. limits from
  `pam_limits`, which override a per-service `rlimit`.  Issue #420
 - Finit now ships with a built-in brokerless D-Bus implementation, **libink**,
  exposing the running init system as a peer on its own private bus at
  `/run/finit/bus`, and -- opportunistically -- registering `org.finit` on the
  standard system bus when a `dbus-daemon` is reachable.  No external
  `libdbus`/`sd-bus`/`GIO` dependency.  The bus implements the stock
  `org.freedesktop.DBus`, `Peer`, `Introspectable`, and `Properties`
  interfaces.  See [D-Bus Integration](dbus.md) for the full surface, build
  flag, and `dbus-send`/`dbus-monitor` examples
 - New `org.finit.Manager1` interface at `/org/finit/manager`: `ListServices`,
  `GetService`, `Start`/`Stop`/`Restart`/`Reload`, `SetRunlevel`, `SetDebug`,
  `Signal`, `Suspend`, and the `Reboot`/`Halt`/`Poweroff` triplet, which take
  a timeout argument arming the emergency shutdown bypass like `initctl -t`.
  Read-only properties `Runlevel`, `PrevRunlevel`, `Version`; signals
  `ServiceStateChanged (sss)` and `RunlevelChanged (ss)`
 - New `org.finit.Service1` interface at `/org/finit/service/<encoded>`, one
  object per loaded service, with `Start`/`Stop`/`Restart`/`Reload` for
  working off an object handle rather than passing the identity string around
 - New `org.finit.Cond1` interface at `/org/finit/cond`: `Get`, `Set`, `Clear`,
  `List`, `Dump` for [user-defined conditions](conditions.md), with a
  `ConditionChanged (ss)` signal
 - keventd serves `org.finit.Device1` on its own bus at `/run/keventd/bus`:
  `Settle`, `Trigger`, `Info`, `RulesReload`, queue-state properties, and a
  `DeviceProcessed (ss)` signal.  The `udevadm` settle/trigger/info
  equivalents are thereby bus methods and `keventd -S` asks the running daemon
  first.  Finit also gained a `Manager1.ConfigReloaded` signal, fired when
  `initctl reload` completes, for external condition providers and monitoring
 - Privileged D-Bus methods accept root and members of the `--with-group`
  group; everyone else is refused.  On the local bus the caller's uid and
  groups come straight from the kernel (`SO_PEERCRED` + `SO_PEERGROUPS`), so
  the check never blocks PID 1 on an NSS lookup.  Over the system bus the uid
  is resolved from the broker (`GetConnectionUnixUser`) and privileged methods
  are root-only.  Read-only methods are open
 - `initctl` now transparently routes through D-Bus when the bus is reachable,
  with the legacy `INIT_SOCKET` transport as a fallback: `start`, `stop`,
  `restart`, `reload`, `reload <svc>`, `reboot`, `halt`, `poweroff`,
  `suspend`, `debug`, `signal`, `runlevel`, and `cond {get,set,clr}` all use
  the new path.  Two new subcommands show up that have no legacy equivalent:
    * `initctl monitor` -- streams every signal on the bus to the terminal,
      one line per delivery (`HH:MM:SS iface.member(args)`), until
      interrupted.  Same idea as `dbus-monitor`, but scoped to Finit and with
      no address plumbing required.
    * Issuing `initctl cond set/clr` over D-Bus also fires the
      `Cond1.ConditionChanged` signal, so observers see user-driven state
      changes the same way they see service-driven ones.
 - Restart log now spells out the signal name and flags core dumps,
  e.g. `killed by SIGKILL` or `killed by SIGSEGV, core dumped`, in place of
  the bare numeric `by signal: N`.  Gives operators a much stronger breadcrumb
  when a daemon dies unexpectedly
 - Service `user:` and `group:` names, including supplementary groups, can
  now be up to 63 characters, up from 15.  Longer names were silently
  truncated before the lookup, so the service never started.  By Anees Rehman
 - `stop:` and `reload:` scripts take a timeout of their own, `stop:5,/path`,
  defaulting to the kill delay as before.  Such a line used to crash Finit at
  config load
 - Shutdown now stops after the first successful remount of `/` read only.
  The plain `mount -n -o remount,ro /`, which reads `/etc/fstab`, is only
  used when both device-agnostic forms fail, the same order as Debian's
  `umountroot`.  By Anees Rehman
 ### Fixes
 - Reject a .conf file that declares the same block title twice.  The title is
  the service identity and libConfuse merges two sections sharing one, so the
  file loaded as a single service holding a mix of both declarations,
  silently.  This hit `system/10-hotplug.conf`, where the two `udevd` blocks
  left only the second command, dropping the service on systems that only have
  `systemd-udevd`.  The same title in another file is still how a system .conf
  is overridden
 - Remove stale daemon-owned (`pid:!`) pidfiles after unclean exits.  When a
  daemon dies via SIGKILL/OOM/segfault, or exits early during startup, its
  pidfile lingers and can prevent the next instance from starting --
  `dbus-daemon` for example refuses to start when its pidfile already exists,
  so Finit's restart loop gives up.  Finit now drops the file when it still
  names the just-reaped PID and that PID is no longer alive (the liveness
  check guards against PID reuse).  This is a controlled exception to the
  long-standing rule that Finit does not touch service-owned pidfiles
 - Fix misspelled `SIGUNKOWN` returned by `sig_name()` for unknown signal
  numbers, now spelled correctly as `SIGUNKNOWN`.  Surfaced by the new restart
  log above
 - Fix mode of existing `d`/`D` directories in tmpfiles, the chmod branch
  never ran because the directory creation swallowed `EEXIST`.  Mode and owner
  of `d`/`D`, `e`, and `f`/`F` entries, and of the service directories
  `mksubsysd()` creates, are now set through an open fd and only when they
  differ, so an immutable directory like `/var/empty` no longer warns on every
  boot.  By Sam Brkopac
 - Fix a lost reload for a service paused mid-reload by a condition in
  flux.  A second reload arriving meanwhile re-parsed the unchanged .conf
  and cleared the pending mark, so the service resumed without ever being
  reloaded.  Seen on Infix, where sshd kept its old listen addresses after
  a change that landed as two reloads in a row
 [4.17][] - 2026-04-28
 ---------------------
 ### Changes
 - Add Plymouth boot splash plugin to manage the `plymouthd` lifecycle across boot,
  `switch_root`, and shutdown.  Activated by the `splash` kernel command line
  argument.  By Aaron Andersen
 - Add `tty:` option for run/task/service stanzas to acquire a controlling
  terminal.  The device is opened as stdin, set as the session's controlling TTY
  via `TIOCSCTTY`, and `TERM` is set automatically — `linux` for virtual terminals
  and `vt102` for serial lines.  By Ollie Gutierrez
 - Improve console output atomicity at boot and shutdown: description and status
  (`[ OK ]` / `[FAIL]`) are emitted in a single write so kernel messages cannot
  split them.  If output has been scrolled away, the description is re-printed
  before the final status line.  Console buffer is drained with `tcdrain(2)` and
  ANSI attributes are reset before handing control back to the kernel at
  shutdown/reboot
 ### Fixes
 - Fix reverse-dependency condition handling on reload: when a service without
  SIGHUP support is reloaded, its condition is now cleared immediately so
  dependents transition to `STOPPING` before `SIGTERM` is sent to the parent,
  preventing them from crashing with an incremented restart counter
 - Fix `/var/tmp` mode in `tmpfiles.d/var.conf` from `0777` to `1777` (sticky bit)
  to match `/tmp`, by Aaron Andersen
 - Fix potential memory corruption in config parser: stale pointer captures of
  `PATH` and `SHELL` at startup could dangle after environment modification;
  `conf_reset_env()` now reads from the live environment instead, by Vasily Zubko
 - Fix plugin name registration: replace `__FILE__` macro with explicit string
  literals in all plugin structs and debug messages, preventing subtle build-
  system–dependent macro expansion issues, by Vasily Zubko
 [4.16][] - 2026-02-27
 ---------------------
@@ -1968,7 +2183,8 @@ Major bug fix release.
 * Initial release
-[UNRELEASED]: https://github.com/finit-project/finit/compare/4.15...HEAD
+[UNRELEASED]: https://github.com/finit-project/finit/compare/4.17...HEAD
 [4.17]: https://github.com/finit-project/finit/compare/4.16...4.17
 [4.16]: https://github.com/finit-project/finit/compare/4.15...4.16
 [4.15]: https://github.com/finit-project/finit/compare/4.14...4.15
 [4.14]: https://github.com/finit-project/finit/compare/4.13...4.14
@@ -3,6 +3,7 @@ EXTRA_DIST      = AUTHORS ChangeLog.md
 docsdir        := @docdir@/doc
 dist_docs_DATA  = build.md cmdline.md commands.md conditions.md 	\
 		  dbus.md						\
 		  distro.md example.md features.md index.md initctl.md	\
 		  keventd.md plugins.md requirements.md runlevels.md	\
 		  runparts.md service.md signals.md state-machine.md	\
@@ -2,10 +2,23 @@ Building Finit
 ==============
 Finit comes with a traditional configure script to control features and
-optional plugins to enable.  It depends on two external libraries:
+optional plugins to enable.  It depends on three external libraries:
 - [libuEv][], the event loop
 - [libite][] (-lite), much needed frog DNA
 - [libConfuse][], the parser behind the .conf format
 The bundled device manager, keventd, needs a fourth: libblkid from
 [util-linux][].  It reads the filesystem UUID and label off block
 devices, which is what the curated rules name the `/dev/disk/by-uuid/`
 and `/dev/disk/by-label/` symlinks after.  keventd is enabled by
 default, so this is a hard requirement unless you build with
 `--without-keventd`.
 PAM session support for services is built by default.  It needs
 [Linux-PAM][] (-lpam); the build falls back to no PAM support when that
 library is missing.  A static build, `--enable-static`, disables PAM
 too, since libpam loads its modules with `dlopen()`.
 > [!IMPORTANT]
 > Most free/open source software packages that use `configure` default
@@ -22,6 +35,8 @@ version of the above mentioned libraries.  Currently required versions:
 - libite v2.2.0, or later
 - libuEv v2.2.0, or later
 - libConfuse v3.3, or later
 - libblkid, any version, when keventd is enabled
 Configure
@@ -44,21 +59,56 @@ Below are a few of the main switches to configure:
  built-ins (.o files) and all external libraries, except the C library
  will be linked statically.
 * `--disable-pam`: Opt out of Finit's built-in PAM session support,
  enabled by default, which lets a service declare `pam = "name"` and
  run inside a session set up from `/etc/pam.d/name`.  Needs libpam,
  falls back to disabled when it is missing, and is also disabled for
  `--enable-static` builds.  Asking for `--enable-pam` and
  `--enable-static` together is an error rather than a fallback.  See
  [PAM Sessions](config/pam.md)
 * `--enable-kernel-cmdline`: Enable Finit pre-4.1 parsing of init args from
  `/proc/cmdline`, this is *not recommended* since Finit may be running as the
  init for container apps that can see the host's `/proc` filesystem
 * `--disable-dbus`: Opt out of Finit's built-in D-Bus support, enabled by
  default.  See [D-Bus Integration](dbus.md) for what it provides.  Not to
  be confused with `--disable-dbus-plugin` below, which only governs
  starting an external `dbus-daemon`
 * `--enable-alsa-utils-plugin`: Enable the optional `alsa-utils.so` sound plugin.
-* `--enable-dbus-plugin`: Enable the optional D-Bus `dbus.so` plugin.
+* `--disable-dbus-plugin`: Drop the `dbus.so` plugin, which launches
  `dbus-daemon` at boot.  Enabled by default; the plugin does nothing on
  a system that has no `dbus-daemon` installed, so opting out is only
  needed to keep init from starting a bus on a system that has one.
  Unrelated to the built-in bus, see `--disable-dbus` above.
 * `--enable-resolvconf-plugin`: Enable the `resolvconf.so` optional plugin.
 * `--enable-x11-common-plugin`: Enable the optional X Window `x11-common.so` plugin.
-* `--with-sulogin`: Enable bundled `sulogin` program.  Default is to use the
+* `--without-keventd`: Drop the bundled device manager, for systems that
-  system `sulogin(8)`.  The sulogin shipped with Finit *allows password-less*
+  run mdev, mdevd, or udevd instead.  Enabled by default, and the only
-  login if the `root` user is disabled or has no password at all.
+  thing that pulls in libblkid.  See [Bundled Device Manager](keventd.md).
 * `--without-sulogin`: Drop the bundled `sulogin`, enabled by default,
  and use the system `sulogin(8)` instead.  The one shipped with Finit
  *allows password-less* login if the `root` user is disabled or has no
  password at all.  `--with-sulogin=USER` prompts for another user's
  password than `root`'s.
 * `--without-watchdog`: Drop the bundled `watchdogd`, enabled by default
  on `/dev/watchdog`, `--with-watchdog=DEV` selects another device.
  Finit starts it when the device node exists, see [Watchdog](watchdog.md).
 * `--with-libsystemd`: Build the replacement `libsystemd`, which lets
  programs that use `sd_notify()` talk to Finit without systemd.  Off by
  default because it installs `libsystemd.so.0` in `$libdir`: on a host
  that has the real one, ours shadows it in the loader cache and every
  program linking it, `dbus-daemon` and `udevd` included, loses the
  symbols it needs.  Safe on a systemd-free system, which is the point
  of it.
 For more configure flags, see <kbd>./configure --help</kbd>
@@ -85,8 +135,7 @@ Then configure, build and install:
 ```shell
 $ ./configure --prefix=/usr                 --exec-prefix=         \
-              --sysconfdir=/etc             --localstatedir=/var   \
+              --sysconfdir=/etc             --localstatedir=/var
              --with-keventd                --with-watchdog
 $ make
 .
 .
@@ -114,6 +163,60 @@ Linux config to:
 > `/etc/fstab`.
 Testing
 -------
 `make check` runs the test suite in a private namespace, so it is safe
 on a running system.  It needs `unshare` and, on Ubuntu, unprivileged
 user namespaces enabled:
 ```shell
 sudo sysctl kernel.apparmor_restrict_unprivileged_userns=0
 make check
 ```
 The D-Bus message parser is the only place in Finit where bytes off a
 socket become pointers, so it also has a fuzz target.  `make check`
 runs it as a fixed sweep, which takes milliseconds and needs nothing
 beyond the normal build.  To fuzz it properly, build it with clang and
 libFuzzer:
 ```shell
 clang -fsanitize=fuzzer,address -DLINK_FUZZ_LIBFUZZER -D_GNU_SOURCE \
      -I libink -I . -o fuzz-msg-parse                              \
      test/src/fuzz-msg-parse.c libink/*.c
 mkdir -p .fuzz-corpus
 ./fuzz-msg-parse .fuzz-corpus -max_total_time=300
 ```
 Give it a corpus directory as above and it saves what it learns there,
 so the next run picks up where this one left off instead of starting
 cold.  Nothing writes to it unless you name it: without the argument
 libFuzzer keeps everything in memory and the run leaves only crashes
 behind.  `make distclean` clears the corpus and the target.
 Once a corpus has grown, most of it reaches code some earlier input
 already reached.  Minimise it:
 ```shell
 ./fuzz-msg-parse -merge=1 .fuzz-corpus-min .fuzz-corpus
 rm -rf .fuzz-corpus && mv .fuzz-corpus-min .fuzz-corpus
 ```
 Run `./configure` first, the target needs the generated `config.h`.
 If the link fails with `cannot find -lstdc++`, install the `libstdc++`
 headers matching the newest GCC on the system, not the default one:
 clang picks the newest tree it finds, and that is the one that needs
 them.  CI runs this target on every pull request, carrying its
 corpus between runs so it reaches deeper over time.
 Feed a file back to the target to reproduce a find:
 ```shell
 ./fuzz-msg-parse crash-3f2a...
 ```
 Running
 -------
@@ -171,7 +274,11 @@ Notice the `--` separator.
 To debug startup issues, in particular issues with getty/login, add
 the following to your Finit .conf file:
-    tty [12345789] notty noclear
+    tty board {
        runlevel = "12345789"
        notty    = true
        noclear  = true
    }
 The `notty` option ensures reusing the stdin/stdout set up by the
 kernel.  Remember, this is only for debugging and would leave your
@@ -189,3 +296,6 @@ it only for debugging start up issues when Finit crashes.
 [1]:       https://github.com/finit-project/finit/releases/download/4.3/finit-4.3.tar.gz
 [libuEv]:  https://github.com/troglobit/libuev
 [libite]:  https://github.com/troglobit/libite
 [libConfuse]: https://github.com/libconfuse/libconfuse
 [util-linux]: https://github.com/util-linux/util-linux
 [Linux-PAM]:  https://github.com/linux-pam/linux-pam
@@ -41,7 +41,7 @@ The `bool` setting is one of `on, off, true false, 1, 0`.
   Useful when starting up in various [rescue mode][rescue], factory, or
   production test setups.  Use the top-level configuration file
-   directive `rcsd /path/to/finit.d` to override the default rcS.d
+   setting `rcsd = "/path/to/finit.d"` to override the default rcS.d
   directory.
 * `finit.debug[=bool]`: Enable finit debug.  This is operated
@@ -104,8 +104,9 @@ The `bool` setting is one of `on, off, true false, 1, 0`.
 * `single`, or `S`: Overrides the configured runlevel (default: 2) to go
    to after bootstrap by forcing it to runlevel 1, this is also known
    as single user mode.  Useful to debug startup problems.  All services
-    and TTYs in `[1]` will be started, so a `tty [1] @console nologin`
+    and TTYs in runlevel 1 will be started, so a `tty` block with
-    configuration presents you with a root console without login.
+    `runlevel = "1"`, `device = "@console"`, and `nologin = true`
    presents you with a root console without login.
 * `1-9`, except `6`: override the configured `runlevel`.  Like the `S`
   and `rescue`, giving a single number on the kernel command line tells
@@ -7,19 +7,27 @@ mechanism for common synchronization problems.  For example:
 - *"wait for service A to start before starting service B"*, or
 - *"wait for basic network access to be available"*
-Conditions are similar in syntax to declaring runlevels per service.
+A condition is named in the `conditions` list of a `service`, `task`, or
-They are specified within angle brackets `<>` and can be applied to any
+`run` block.  The list may hold several, and they are logically AND'ed
 of the `service`, `task`, or `run` stanza.  Multiple conditions may be
 specified separated by comma.  Multiple conditions are logically AND'ed
 during evaluation, i.e. all conditions must be satisfied in order for a
-service to run.
+service to run.  In running text, and in `initctl` output, a condition
 is written inside angle brackets, `<pid/syslogd>`.
-Two special prefixes can be used inside the angle brackets:
+One prefix can be used on a condition:
 - `!` -- service does not support `SIGHUP` (noreload), or run/task
   should not block runlevel changes (i.e., bootstrap)
 - `~` -- propagate reload from this dependency, see below
 The line-based format also accepts a leading `!` on the list, which is
 not a condition and not a negation.  It is a flag on the block, and it
 means two unrelated things depending on where it sits: a service does
 not support `SIGHUP` (noreload), or a run/task should not block
 runlevel changes, i.e. bootstrap.  Each of those is its own key here:
 | Line-based | Block format |
 |---|---|
 | `<!...>` on a service or sysv | `reload-signal = "none"` |
 | `<!...>` on a run or task | `required = false` |
 Finit guarantees by default that all run/tasks run (at least) once
 per runlevel.  For most tasks this is a good default, for example
 checking SSH host keys or loading keymap.  However, for conditions
@@ -27,7 +35,12 @@ that are unlikely to happen it is not. (See example below.)
 ### Example
-    service [2345] <pid/setupd,pid/zebra> /sbin/netd -- Network monitor
+    service netd {
        description = "Network monitor"
        runlevel    = "2345"
        conditions  = { "pid/setupd", "pid/zebra" }
        command     = "/sbin/netd"
    }
 In this example the Network monitor daemon `netd` is not started until
 both the `pid/setupd` *and* `pid/zebra` conditions are satisfied.  A
@@ -42,15 +55,28 @@ being created, i.e., the service's default readiness notification.
 Another example is `dropbear`, it does not support `SIGHUP`, but we can
 also see optional sourcing of arguments from an environment file:
-    service [2345789] <!> env:-/etc/default/dropbear dropbear -F -R $DROPBEAR_ARGS -- Dropbear SSH daemon
+    service dropbear {
        description   = "Dropbear SSH daemon"
        runlevel      = "2345789"
        reload-signal = "none"
        envfile       = "-/etc/default/dropbear"
        command       = "dropbear -F -R $DROPBEAR_ARGS"
    }
 Finally, the weird "block runlevel changes" example.  Here we see what
 happens when Finit receives `SIGPWR`, sent from a power daemon like
 [powstatd(8)][].  A condition is asserted and a user can set up their
 own task to act on it.  We do not want this task to block Finit from
-moving to the next runlevel after bootstrap, so we set `<!>`:
+moving to the next runlevel after bootstrap, so we set
 `required = false`:
-    task [S0123456789] <!sys/pwr/fail> name:pwrfail initctl poweroff -- Power failure, shutting down
+    task pwrfail {
        description = "Power failure, shutting down"
        runlevel    = "S0123456789"
        conditions  = { "sys/pwr/fail" }
        required    = false
        command     = "initctl poweroff"
    }
 Propagating Reload in Dependencies
@@ -65,13 +91,23 @@ not care if it reloads its config.
 For services that need to react when their upstream reloads, the `~`
 prefix propagates the reload from the dependency:
-    service <pid/svc_a>   name:svc_b /sbin/svc_b -- Needs A (barrier)
+    service svc_b {
-    service <!~pid/svc_b> name:svc_c /sbin/svc_c -- Propagate reload from B
+        description = "Needs A (barrier)"
        conditions  = { "pid/svc_a" }
        command     = "/sbin/svc_b"
    }
    service svc_c {
        description   = "Propagate reload from B"
        conditions    = { "~pid/svc_b" }
        reload-signal = "none"
        command       = "/sbin/svc_c"
    }
 Here, `<~pid/svc_b>` means: propagate a reload of `svc_b` to `svc_c`.
-When `svc_b` reloads, `svc_c` will be restarted (because of `!`,
+When `svc_b` reloads, `svc_c` will be restarted, because of
-noreload) instead of merely resumed.  If `svc_c` supported `SIGHUP`
+`reload-signal = "none"`, instead of merely resumed.  If `svc_c`
-(no `!` prefix), it would be sent `SIGHUP` instead.
+supported `SIGHUP`, it would be sent `SIGHUP` instead.
 This is similar to systemd's `PropagatesReloadTo=` directive, but
 declared on the consumer side rather than the provider side.
@@ -103,7 +139,12 @@ services, or run/task jobs, on external site-dependent stimuli.
 **Example:**
-    service [2345] <usr/foo> alarm --arg foo -- Foo alarm
+    service alarm {
        description = "Foo alarm"
        runlevel    = "2345"
        conditions  = { "usr/foo" }
        command     = "alarm --arg foo"
    }
 For convenience, prefixing with `usr/` is allowed, but any other slashes
 or period characters are disallowed.  E.g., to trigger the `Foo alarm`,
@@ -126,8 +167,9 @@ Static (one-shot) conditions, like `usr/`, never enter the `flux` state.
 > "touch" or recreate, their PID file on `SIGHUP`.  This can be done by
 > calling `utimensat()` on the PID file.  Provided, of course, that the
 > service supports reloading on `SIGHUP`, otherwise it will be restarted
-> by Finit when they instead exit on the signal.  For such services, use
+> by Finit when they instead exit on the signal.  For such services,
-> `<!>` to tell Finit the service does not support `SIGHUP`.
+> set `reload-signal = "none"` to tell Finit the service does not
 > support `SIGHUP`.
 Built-in Conditions
@@ -135,25 +177,35 @@ Built-in Conditions
 Finit comes with a set of plugins for conditions:
- - `devmon` (built-in)
+ - `keventd`: provides `<dev/...>`, `<class/...>`, `<driver/...>`, and
- - `netlink`
+   `<sys/pwr/...>`
- - `pidfile`
+ - `devmon` (built-in fallback for `<dev/...>` without keventd)
 - `netlink`: provides `<net/...>`
 - `pidfile`: provides `<pid/...>`
 - `sys`
 - `usr`
-The `devmon` (built-in) plugin monitors `/dev` and `/dev/dir` for device
+The `dev/` conditions are provided by `keventd`, the built-in device
-nodes being created and removed.  It is active only when a run, task, or
+manager.  When keventd creates a device node in `/dev`, it also asserts
-service has declared a `<dev/foo>` or `<dev/dir/bar>` condition.
+the corresponding `dev/` condition.  When a device is removed, the
 condition is cleared.  If keventd is not in use (an external device
 manager like udevd is used instead), the `devmon` built-in provides the
 same conditions by monitoring `/dev` and `/dev/dir` with inotify.
-The `pidfile` plugin (recursively) watches `/run/` (recursively) for PID
+keventd also asserts `class/<subsystem>/<name>` for devices that have
-files created by the monitored services, and sets a corresponding
+no `/dev` node, e.g. LEDs and DSA switch ports, and `driver/<name>`
-condition in the `pid/` namespace.
+while a driver is bound to at least one device.  See
 [keventd](keventd.md) for details.
 The `pidfile` plugin recursively watches `/run/` for PID files created
 by the monitored services, and sets a corresponding condition in the
 `pid/` namespace.
 Similarly, the `netlink` plugin provides basic conditions for when an
 interface is brought up/down and when a default route (gateway) is set,
 in the `net/` namespace.
-The `sys` and `usr` plugins monitor are passive condition monitors where
+The `sys` and `usr` plugins are passive condition monitors where
 the action is provided by `keventd`, signal handlers, and in the case of
 `usr`, the end-user via the `initctl` tool.
@@ -188,6 +240,8 @@ Built-in conditions:
 - `usr/foo`
 - `boot/arg`
 - `dev/node` and `dev/dir/node`
 - `class/<subsystem>/<name>`
 - `driver/<name>`
 > [!NOTE]
 > Here, `up` means administratively up, the interface flag `IFF_UP`.
@@ -199,16 +253,16 @@ Composition
 -----------
 The `pid/` conditions are generated by the Finit `pidfile.so` plugin and
-composed from a service's `name:` and `:id`.  By default the basename of
+composed from a service's block title and its `:id`.  By default the
-the daemon and the empty string.
+basename of the daemon and the empty string.
-| **service**                                        | **condition**    |
+| **service**                                                       | **condition**    |
-|----------------------------------------------------|------------------|
+|-------------------------------------------------------------------|------------------|
-| /sbin/foo                                          | pid/foo          |
+| `service { command = "/sbin/foo" }`                                | pid/foo          |
-| /sbin/bar -p /run/baz.pid                          | pid/bar          |
+| `service { command = "/sbin/bar -p /run/baz.pid" }`               | pid/bar          |
-| name:lxc :foo lxc-start -n foo -p /run/lxc/foo.pid | pid/lxc:foo      |
+| `service lxc:foo { command = "lxc-start -n foo -p /run/lxc/foo.pid" }` | pid/lxc:foo  |
-| /usr/bin/dbus-daemon                               | pid/dbus-daemon  |
+| `service { command = "/usr/bin/dbus-daemon" }`                     | pid/dbus-daemon  |
-| :222 dropbear -p 222                               | pid/dropbear:222 |
+| `service dropbear:222 { command = "dropbear -p 222" }`             | pid/dropbear:222 |
 The condition is asserted when `pidfile.so` receives an inotify event
 for a file matching `/run/*.pid`, `/run/**/*.pid`, or `/run/**/pid`,
@@ -223,8 +277,8 @@ its conditions are cleared and reasserted, ensuring dependent services
 are properly updated.
 Daemons that don't create PID files, or fail to touch them on reload,
-can be worked around by using the `pid:/path/to/file.pid` syntax in
+can be worked around by setting `pidfile` and `pidfile-create` in the
-the service stanza for the daemon.  It is far from optimal since any
+service block for the daemon.  It is far from optimal since any
 synchronization of depending services may fail due to the daemon not
 having reinitialized/created their IPC sockets, or similar.
@@ -307,8 +361,8 @@ restarts that would otherwise occur because a depending service was sent
 Services with the `~` prefix are an exception to this rule: when their
 conditions return to `on` after being in `flux`, the reload is propagated
-- the service is reloaded (SIGHUP) or restarted (noreload `!`) instead
+-- the service is reloaded (SIGHUP), or restarted if it has
-of simply being resumed.
+`reload-signal = "none"`, instead of simply being resumed.
 Therefore, any plugin that supplies Finit with conditions must ensure
 that their state is updated after each reconfiguration.  This can be
@@ -16,14 +16,17 @@ which is the same approach used by other modern service managers like dinit.
 ## Basic Usage
-Capabilities are specified using the `caps:` directive in service configuration:
+Capabilities are specified with the `capabilities` key, alias `caps`:
 ```conf
-service [2345] name:nginx \
+service nginx {
-        @www-data:www-data \
+    description  = "Web server"
-        caps:^cap_net_bind_service \
+    runlevel     = "2345"
-        /usr/sbin/nginx -g 'daemon off;' \
+    user         = "www-data"
-        -- Web server
+    group        = "www-data"
    capabilities = { "^cap_net_bind_service" }
    command      = "/usr/sbin/nginx -g 'daemon off;'"
 }
 ```
 This example allows nginx to bind to privileged ports (like 80 and 443) while
@@ -52,7 +55,7 @@ with the following prefixes:
 Multiple capabilities can be specified as a comma-separated list:
 ```conf
-caps:^cap_net_raw,^cap_net_admin,^cap_net_bind_service
+capabilities = { "^cap_net_raw", "^cap_net_admin", "^cap_net_bind_service" }
 ```
 ## Common Use Cases
@@ -62,10 +65,13 @@ caps:^cap_net_raw,^cap_net_admin,^cap_net_bind_service
 Allow a web server to bind to ports 80 and 443 without running as root:
 ```conf
-service [2345] name:webserver \
+service webserver {
-        @www-data:www-data \
+    runlevel     = "2345"
-        caps:^cap_net_bind_service \
+    user         = "www-data"
-        /usr/sbin/nginx -g 'daemon off;'
+    group        = "www-data"
    capabilities = { "^cap_net_bind_service" }
    command      = "/usr/sbin/nginx -g 'daemon off;'"
 }
 ```
 ### Network Monitoring (Raw Sockets)
@@ -73,10 +79,12 @@ service [2345] name:webserver \
 Allow packet capture without root privileges:
 ```conf
-service [2345] name:tcpdump \
+service tcpdump {
-        @tcpdump \
+    runlevel     = "2345"
-        caps:^cap_net_raw,^cap_net_admin \
+    user         = "tcpdump"
-        /usr/sbin/tcpdump -i eth0 -w /var/log/capture.pcap
+    capabilities = { "^cap_net_raw", "^cap_net_admin" }
    command      = "/usr/sbin/tcpdump -i eth0 -w /var/log/capture.pcap"
 }
 ```
 ### NTP Daemon (System Time)
@@ -84,10 +92,12 @@ service [2345] name:tcpdump \
 Allow time synchronization without full root:
 ```conf
-service [2345] name:ntpd \
+service ntpd {
-        @ntp \
+    runlevel     = "2345"
-        caps:^cap_sys_time,^cap_sys_nice \
+    user         = "ntp"
-        /usr/sbin/ntpd -n
+    capabilities = { "^cap_sys_time", "^cap_sys_nice" }
    command      = "/usr/sbin/ntpd -n"
 }
 ```
 ## Available Capabilities
@@ -116,9 +126,9 @@ Common capabilities include (see `man 7 capabilities` for the complete list):
   - Don't grant `cap_sys_admin` unless absolutely necessary
 2. **Specify a user (preferably non-root)**
-   - The `@user` directive is **required** for `caps:` to take effect
+   - The `user` setting is **required** for `capabilities` to take effect
-   - For ambient capabilities (`^`), use a non-root user (not `@root`)
+   - For ambient capabilities (`^`), use a non-root user (not `"root"`)
-   - Example: `@www-data`, `@nginx`, `@tcpdump`
+   - Example: `user = "www-data"`, `user = "nginx"`, `user = "tcpdump"`
 3. **Use ambient capabilities (`^`)**
   - The `^` prefix ensures capabilities survive exec()
@@ -159,21 +169,29 @@ ps -o user,pid,cmd -p $(pidof nginx)
 - Linux kernel 4.3+ (for ambient capabilities support)
 - libcap library installed
- Finit built with `--enable-libcap`
+- Finit built with `--enable-libcap`, otherwise a `capabilities` list is
  ignored, with a warning
 ## Limitations
- The `caps:` directive requires `@user` to be specified for it to take effect
+- `capabilities` requires `user` to be set for it to take effect
-  - Without `@user`, the service runs as root with full capabilities and
+  - Without `user`, the service runs as root with full capabilities and
-    the `caps:` configuration is silently ignored
+    the `capabilities` list is silently ignored
-  - You can use `@root` with `caps:`, but see below about ambient capabilities
+  - You can use `user = "root"`, but see below about ambient capabilities
 - For ambient capabilities (`^`, recommended), the user **must be non-root**
-  - Using `@root` with `caps:^...` will not work effectively, as ambient
+  - Using `user = "root"` with `^` capabilities will not work effectively, as ambient
    capabilities are only added to the effective set when euid ≠ 0
-  - Use inheritable (`%`) or bounding (`!`) capabilities with `@root` if needed
+  - Use inheritable (`%`) or bounding (`!`) capabilities with `user = "root"` if needed
- Services without `caps:` use standard privilege dropping:
+  - Finit warns about this when reading the .conf file:
-  - Services with `@user` (non-root) have no special capabilities
+
-  - Services without `@user` run as root with full capabilities
+        nginx: ambient capabilities ('^') have no effect as root, use a
        non-root user, or '%' and '!' entries
 - Services without `capabilities` use standard privilege dropping:
  - Services with a non-root `user` have no special capabilities
  - Services without `user` run as root with full capabilities
 - A capability granted by `pam_cap.so` in a [PAM session](pam.md) is
  merged into this set, but only when `capabilities` is also set.
  Without it the grant is lost when privileges drop
 - Some very old binaries may not work correctly with ambient capabilities
 - File system capabilities are not managed by Finit (use `setcap` for that)
@@ -1,19 +1,17 @@
-Finit provides three different cgroup directives for controlling resource allocation:
+Finit has two `cgroup` blocks for controlling resource allocation:
- 1. **Top-level cgroup definition**: `cgroup NAME settings`
+ 1. **Top-level definition**, at file scope: declares a group such as
-    - Defines a top-level cgroup (e.g., `init`, `system`, `user`) with default settings
+    `init`, `system`, or `user`, and its default settings.
    - Space-separated syntax
    - Example: `cgroup system cpu.weight:9700`
- 2. **Global cgroup selector**: `cgroup.NAME[,options]` (standalone directive)
+        cgroup system { cpu.weight = 9700 }
    - Sets the default cgroup for subsequent services in a `.conf` file
    - Dot-separated with optional comma-separated options
    - Example: `cgroup.maint` or `cgroup.system,delegate`
- 3. **Per-service cgroup option**: `cgroup.NAME[,options]` or `cgroup:options`
+ 2. **Joining a group**, inside a service block: names the group this
-    - Overrides the cgroup for a specific service
+    service runs in, and may override settings for itself alone.
-    - Part of the service directive line
+
-    - Example: `service [...] cgroup.maint,mem.max:1G /path/to/cmd`
+        service foo {
            cgroup maint { memory.max = 1G }
            command = "/path/to/cmd"
        }
 > [!NOTE]
 > Linux cgroups and details surrounding values are not explained in the
@@ -23,83 +21,74 @@ Finit provides three different cgroup directives for controlling resource alloca
 Top-level Cgroup Definition
 ----------------------------
-**Syntax:** `cgroup NAME settings`
+**Syntax:** `cgroup NAME { settings }`
    # Top-level cgroups and their default settings.  All groups mandatory
    # but more can be added, max 8 groups in total currently.  The cgroup
    # 'root' is also available, reserved for RT processes.  Settings are
    # as-is, only one shorthand 'mem.' exists, other than that it's the
    # cgroup v2 controller default names.
-    cgroup init   cpu.weight:100
+    cgroup init   { cpu.weight = 100  }
-    cgroup user   cpu.weight:100
+    cgroup user   { cpu.weight = 100  }
-    cgroup system cpu.weight:9800
+    cgroup system { cpu.weight = 9800 }
 Adding an extra cgroup `maint/` will require you to adjust the weight of
 the above three.  We leave `init/` and `user/` as-is reducing weight of
 `system/` to 9700.
-    cgroup system cpu.weight:9700
+    cgroup system { cpu.weight = 9700 }
    # Example extra cgroup 'maint'
-    cgroup maint  cpu.weight:100
+    cgroup maint  { cpu.weight = 100  }
 By default, the `system/` cgroup is selected for almost everything.  The
-`init/` cgroup is reserved for PID 1 itself and its closest relatives.
+`init/` cgroup is reserved for the early boot helpers Finit drives
 itself, like udev and mdev.  PID 1 runs in the root cgroup, since a
 cgroup holding processes cannot delegate controllers to its children.
 The `user/` cgroup is for local TTY logins spawned by getty.
-Global Cgroup Selector
+Joining a Cgroup
----------------------
+----------------
-**Syntax:** `cgroup.NAME[,options]` (standalone directive)
+**Syntax:** `cgroup NAME { settings }` (inside a service block)
-To select a different top-level cgroup, e.g. `maint/`, for a group of
+Every block says which group it joins, by name.  An empty block joins
-run/task/service directives in a `.conf` file, use the `cgroup.NAME`
+without changing anything:
 directive as a standalone line:
-    cgroup.maint
+    service foo {
-    service [...] <...> /path/to/foo args -- description
+        cgroup maint {}
-    service [...] <...> /path/to/bar args -- description
+        command = "/path/to/foo args"
    }
-Both services will run in the `maint/` cgroup.
+    service bar {
        cgroup maint {}
        command = "/path/to/bar args"
    }
-You can also include options with the global selector:
+Both services run in the `maint/` cgroup.  Settings inside the block
 apply to that service alone:
-    cgroup.system,delegate
+    service foo {
-    service [...] <...> /path/to/foo args -- description
+        cgroup maint {
            cpu.max    = 10000
            memory.max = 655360
        }
        command = "/path/to/foo args"
    }
-Per-Service Cgroup Option
+> [!NOTE]
--------------------------
+> The legacy format has a standalone `cgroup.NAME` line that selects a
 > group for every stanza following it in the file, and a `cgroup:options`
 > form that applies settings to whichever group is current without
 > naming it.  Neither has an equivalent here, by design: a block that
 > joins a group says so itself, so the group cannot depend on what came
 > earlier in the file.
-**Syntax:** `cgroup.NAME[,options]` or `cgroup:options` (service option)
+Every cgroup setting maps directly to cgroup v2 syntax, so `cpu.max`
-
+maps to the file `/sys/fs/cgroup/maint/foo/cpu.max`.  There is no
-To override the cgroup for a specific service, use the `cgroup.NAME`
+filtering, the one exception being the shorthand `mem.`, which expands
-option within the service directive:
+to `memory.`.  If the file is not available, either the controller is
-
+missing from your Linux kernel, or the name is misspelled.
    service [...] <...> cgroup.maint /path/to/foo args -- description
 This form also allows per-service limits. Two syntaxes are supported:
 **New comma-separated syntax (recommended):**
    service [...] <...> cgroup.maint,cpu.max:10000,mem.max:655360 /path/to/foo args -- description
 **Old colon-separated syntax (legacy):**
    service [...] <...> cgroup.maint:cpu.max:10000,mem.max:655360 /path/to/foo args -- description
 You can also apply options to the current default cgroup (without changing it)
 using the `cgroup:options` syntax:
    service [...] <...> cgroup:cpu.max:10000,mem.max:655360 /path/to/foo args -- description
 Both syntaxes work identically. The new comma-separated syntax is recommended
 as it's more consistent with other option parsing in Finit.
 Note the `mem.` exception to the rule: every cgroup setting maps directly to
 cgroup v2 syntax. I.e., `cpu.max` maps to the file `/sys/fs/cgroup/maint/foo/cpu.max`.
 There is no filtering, except for expanding the shorthand `mem.` to `memory.`.
 If the file is not available, either the cgroup controller is not available
 in your Linux kernel, or the name is misspelled.
 ### Overriding Cgroup Leaf Names
@@ -108,40 +97,66 @@ configuration filename (without the `.conf` extension). For example, a
 service defined in `system/10-hotplug.conf` would create a cgroup at
 `/sys/fs/cgroup/system/10-hotplug/` by default.
-To use a more descriptive name (recommended for clarity), you can specify
+To use a more descriptive name (recommended for clarity), set `name`
-`name:` in the cgroup directive:
+inside the cgroup block:
-    service [...] <...> cgroup.system,name:udevd /lib/systemd/systemd-udevd -- Device event daemon
+    service udevd {
        description = "Device event daemon"
        cgroup system { name = "udevd" }
        command     = "/lib/systemd/systemd-udevd"
    }
 This creates the cgroup at `/sys/fs/cgroup/system/udevd/` instead.
-The syntax supports combining the name override with other options:
+`name` combines with any other setting:
-    service [...] <...> cgroup.system,name:udevd,cpu.max:10000 /lib/systemd/systemd-udevd -- Device event daemon
+    service udevd {
        description = "Device event daemon"
        cgroup system {
            name    = "udevd"
            cpu.max = 10000
        }
        command = "/lib/systemd/systemd-udevd"
    }
 Or with delegation:
-    service [2345] @podman:podman \
+    service podman {
-        cgroup.containers,name:podman,delegate,mem.max:4G \
+        description = "Podman API"
-        /usr/bin/podman system service -- Podman API
+        runlevel    = "2345"
        user        = "podman"
        group       = "podman"
        cgroup containers {
            name       = "podman"
            delegate   = true
            memory.max = 4G
        }
        command = "/usr/bin/podman system service"
    }
-A daemon using `SCHED_RR` currently needs to run outside the default cgroups.
+A daemon using `SCHED_RR` currently needs to run outside the default
 cgroups.
-    service [...] <...> cgroup.root /path/to/daemon arg -- Real-Time process
+    service rt {
        description = "Real-Time process"
        cgroup root {}
        command     = "/path/to/daemon arg"
    }
 Cgroup Delegation
 -----------------
 For services that need to create their own child cgroups (container runtimes
-like Docker, Podman, systemd-nspawn, LXC), use the `delegate` option:
+like Docker, Podman, systemd-nspawn, LXC), set `delegate`:
-    service [2345] @dockerd:dockerd \
+    service dockerd {
-        cgroup.system,delegate /usr/bin/dockerd -- Docker daemon
+        description = "Docker daemon"
-
+        runlevel    = "2345"
-Or with the old colon syntax:
+        user        = "dockerd"
-
+        group       = "dockerd"
-    service [2345] @dockerd:dockerd \
+        cgroup system { delegate = true }
-        cgroup.system:delegate /usr/bin/dockerd -- Docker daemon
+        command     = "/usr/bin/dockerd"
    }
 This allows the container runtime to:
@@ -159,32 +174,46 @@ When delegation is enabled, Finit:
 **Requirements:**
- The service should specify `@user:group` for proper ownership
+- The service should specify `user` and `group` for proper ownership
 - Controllers are delegated from the parent cgroup
-**Example with additional config (new syntax):**
+**Example with additional config:**
-    service [2345] @podman:podman \
+    service podman {
-        cgroup.containers,delegate,mem.max:4G \
+        description = "Podman API"
-        /usr/bin/podman system service -- Podman API
+        runlevel    = "2345"
        user        = "podman"
        group       = "podman"
        cgroup containers {
            delegate   = true
            memory.max = 4G
        }
        command = "/usr/bin/podman system service"
    }
-**Or with old syntax:**
+This delegates the cgroup while also setting a 4GB memory limit.
    service [2345] @podman:podman \
        cgroup.containers:delegate,mem.max:4G \
        /usr/bin/podman system service -- Podman API
 Both examples delegate the cgroup while also setting a 4GB memory limit.
 **Container template example:**
 Here's a real-world example from [Infix OS](https://github.com/kernelkit/infix)
 for running rootful podman container instances using delegation:
-    sysv log:prio:local1,tag:%i kill:30 pid:!/run/container:%i.pid \
+    sysv container:%i {
-        pre:0,/usr/sbin/container cleanup:0,/usr/sbin/container \
+        description   = "container %i"
-        cgroup.system,delegate                                   \
+        runlevel      = "2345"
-        [2345] <!> :%i container -n %i -- container %i
+        reload-signal = "none"
        pidfile       = "/run/container:%i.pid"
        stop-timeout  = 30
        log { priority = "local1"  identity = "%i" }
        exec-start-pre         = "/usr/sbin/container"
        exec-start-pre-timeout = 0
        exec-cleanup           = "/usr/sbin/container"
        exec-cleanup-timeout   = 0
        cgroup system { delegate = true }
        command = "container -n %i"
    }
 This template uses `sysv` type with delegation, demonstrating that cgroup
 delegation works with different service types, not just `service`.
@@ -200,7 +229,7 @@ Initially, the service process runs directly in the cgroup root:
 Once the container runtime creates child cgroups (e.g., `libpod-*/`), cgroups v2
 enforces the "no internal processes" rule. When Finit detects this (`EBUSY` error),
-it automatically creates an `supervisor/` subdirectory and moves service-related
+it automatically creates a `supervisor/` subdirectory and moves service-related
 processes there:
    /sys/fs/cgroup/system/container@web/
@@ -6,15 +6,16 @@ and any `*.conf`, was added.  It is worth noting that these are global
 and *shared with all* services -- the only way to have a service-local
 environment is detailed in [Services Environment](service-env.md).
-The syntax for global environment variables is straight forward.  In
+Global environment variables go in an `environment` block, `env` for
-Finit v4.4 the `set` keyword was added for completeness, but the old
+short:
 syntax (without the `set ` prefix) is still honored:
-    set foo=bar
+    environment {
-    set baz="qux"
+        foo = "bar"
        baz = "qux"
    }
 On reload of .conf files, all tracked environment variables are cleared
-so if `foo=bar` is removed from `finit.conf`, or any `finit.d/*.conf`
+so if `foo` is removed from `finit.conf`, or any `finit.d/*.conf`
 file, it will no longer be used by Finit or any new (!) started
 run/tasks or services.  The environment of already started processes can
 not be changed.
@@ -24,8 +24,8 @@ the following layout is recommended:
    |           `- ...
    `- run/
        `- finit/
            |- bus         # Finit's own D-Bus socket, see doc/dbus.md
            `- system/
                |- dbus.conf
                |- keventd.conf
                |- runparts.conf
                |- watchdogd.conf
@@ -35,18 +35,21 @@ Configuration files in `/etc` are provided by the user, or projects like
 [finit-skel](https://github.com/finit-project/finit-skel) and extended by
 the user.
 The files in `/run/finit/system/*.conf` are generated by Finit for its
 built-in services: runparts, [watchdog](../watchdog.md), and
 [`keventd`](../keventd.md), if they are enabled.  They are read before
 the other .conf directories, so any later file can reference them in
 `if:` statements and override them by name.
 The files in `/lib/finit/system/*.conf` are system critical services and
 setup provided by Finit, e.g. udev/mdev that must run very early at system
 bootstrap.  This system directory was introduced in Finit v4.4 to replace
-the hard-coded services provided by plugins before.  All .conf files in this
+the hard-coded services provided by plugins before.
 directory be either replaced by a system administrator or overridden by a
 file with the same name in `/etc/finit.d/`.
-The files in `/run/finit/system/*.conf` are created by plugins and Finit
+All .conf files in both directories can be either replaced by a system
-bundled services like runparts, [watchdog](../watchdog.md), and
+administrator or overridden by a file with the same name in
-[`keventd`](../keventd.md) if they are enabled.  Like
+`/etc/finit.d/`, which is always read last -- copy a .conf there and
-`/lib/finit/system/*.conf`, these files can be overridden by file with
+modify it, or symlink it to `/dev/null` to disable it outright.
 the same name in `/etc/finit.d/`.
 Services in the `available/` and `enabled/` sub-directories are called
 dynamic services, in contrast to static services -- the only difference
@@ -55,27 +58,28 @@ with the `enable` and `disable` commands.  An administrator can always
 create files and symlinks manually.
 At bootstrap, and `initctl reload`, all .conf files are read, starting
-with `finit.conf`, then `/lib/finit/system/*.conf`, `finit.d/*.conf`,
+with `finit.conf`, then `/run/finit/system/*.conf`,
-and finally all `finit.d/enabled/*.conf` files.  Each directory is a
+`/lib/finit/system/*.conf`, `finit.d/*.conf`, and finally all
-unique group, where files within each group are sorted alphabetically.
+`finit.d/enabled/*.conf` files.  Each directory is a unique group,
 where files within each group are sorted alphabetically.
 **Example:**
    /run/finit/system/keventd.conf
    /run/finit/system/runparts.conf
    /lib/finit/system/10-hotplug.conf
    /lib/finit/system/90-testserv.conf
    /run/finit/system/dbus.conf
    /run/finit/system/runparts.conf
    /etc/finit.d/10-abc.conf
    /etc/finit.d/20-abc.conf
    /etc/finit.d/enabled/1-aaa.conf
    /etc/finit.d/enabled/1-abc.conf
-The resulting combined configuration is read line by line, each `run`,
+The resulting combined configuration is read in order, each `run`,
 `task`, and `service` added to an ordered list that ensures they are
 started in the same order.  This is important because of the blocking
-properties of the `run` statement.  For an example on the relation of
+properties of `run`.  For an example on the relation of `service` and
-`service` and `run` statements, and dependency handling between them,
+`run`, and dependency handling between them, see
-see [Conditional Loading](services.md#conditional-loading), below.
+[Conditional Loading](services.md#conditional-loading), below.
 > [!NOTE]
 > The names `finit.conf` and `finit.d/` are only defaults.  They can be
@@ -84,7 +88,7 @@ see [Conditional Loading](services.md#conditional-loading), below.
 >
 > They can also be overridden from the [kernel command line](../cmdline.md)
 > using: `-- finit.config=/etc/bar.conf` and in that file use the
-> top-level configuration directive `rcsd /path/to/finit.d`.
+> top-level setting `rcsd = "/path/to/finit.d"`.
 Filesystem Layout
 -----------------
@@ -180,7 +184,7 @@ document [Finit Services](../service.md).
 Alternate finit.d/
 ------------------
-**Syntax:** `rcsd /path/to/finit.d`
+**Syntax:** `rcsd = "/path/to/finit.d"`
 The Finit rcS.d directory is set at compile time with:
@@ -194,7 +198,7 @@ configurations, starting with the kernel command line option:
 This file in turn can use the `rcsd` directive to tell Finit to use
 another set of .conf files, e.g.:
-    rcsd /etc/factory.d
+    rcsd = "/etc/factory.d"
 > [!NOTE]
 > This directive is only available from the top-level bootstrap .conf
@@ -203,6 +207,6 @@ another set of .conf files, e.g.:
 Including Finit Configs
 ------------------------
-**Syntax:** `include <CONF>`
+**Syntax:** `include("CONF")`
 Include another configuration file.  Absolute path required.
@@ -6,24 +6,110 @@ the navigation menu.
 Configuration File Syntax
 --------------------------
-The file format is line based, empty lines and comments, lines starting
+A `.conf` file is a series of blocks.  Every setting is a key inside
-with `#`, are ignored.  A configuration directive starts with a keyword
+one, so nothing has to be remembered by position:
 followed by a space and the rest of the line is treated as the value.
 As of Finit v4.4, configuration directives can be broken up in multiple
 lines using the continuation character `\`, and trailing comments are
 also allowed.  Example:
 ```aconf
-# Escape \# chars if you want them literal in, e.g., descriptions
+service sysklogd {
-service name:sysklogd [S123456789]   \
+    description = "System log daemon"
-    env:-/etc/default/sysklogd       \
+    runlevel    = "S123456789"
-    syslogd -F $SYSLOGD_ARGS         \
+    envfile     = "-/etc/default/sysklogd"
-    -- System log daemon \# 1   # Comments allowed
+    command     = "syslogd -F $SYSLOGD_ARGS"
 }
 ```
 Values are quoted strings, bare words, or integers.  Lists use braces,
 and a block may carry a title, which becomes the service identity:
 ```aconf
 # shell comment
 // C++ comment
 /* C comment */
 key      = "value"                 # string
 number   = 20                      # integer
 flag     = true                    # boolean
 list     = { "one", "two" }        # string list
 block title { key = "value" }      # titled section
 path = "${HOME}/thing"             # environment expansion
 include("/etc/finit.d/extra.conf") # include another file
 ```
 Bare words work wherever a string is expected, so `memory.max = 65M`
 and `restart = always` need no quotes.
 ### Two conventions
 Keys are kebab-case, never `snake_case` or `CamelCase`: `restart-sec`,
 `stop-timeout`, `reboot-watchdog`.
 Keys that take a list are plural: `conditions`, `conflicts`,
 `capabilities`, `modules`, `extra-groups`.  Two imperatives keep their
 singular form because they are verbs rather than nouns: `mknod` and
 `include`.
 ### Short forms
 Nine keys have an alias.  An alias may abbreviate the canonical name,
 or preserve the spelling the line-based format used; it never renames.
 | Canonical | Alias | Canonical | Alias |
 |---|---|---|---|
 | `description` | `desc` | `manual-start` | `manual` |
 | `conditions` | `cond` | `remain-after-exit` | `remain` |
 | `capabilities` | `caps` | `stop-signal` | `halt` |
 | `modules` | `mod` | `stop-timeout` | `kill` |
 | `envfile` | `env` | | |
 ### Optional paths
 A leading `-` on a path means carry on if it is not there:
 ```aconf
 service foo {
    envfile = "-/etc/default/foo"   # skip the file if missing
    command = "-/usr/sbin/foo"      # skip the whole block if missing
 }
 ```
 That is the only mark meaning "optional".  Two others mean something
 else: `!` on `runlevel` inverts the set, e.g. `runlevel = "!12345"`,
 and `~` on a condition propagates a reload from the service it names.
 Both are covered where they apply.
 Both Formats Are Read
 ---------------------
 Finit also reads the line-based format it has always used, where a
 stanza is a keyword followed by values whose meaning comes from their
 position:
 ```aconf
 service [S123456789] env:-/etc/default/sysklogd syslogd -F $SYSLOGD_ARGS -- System log daemon
 ```
 That format still works and is not going away.  It is frozen at the
 Finit 4.x feature set, so new settings appear only in the block format,
 and the documentation is written in blocks throughout.  To convert a
 file, see the [Syntax Migration Guide](migration.md).
 There is no new file extension and no marker line.  Every file is still
 `*.conf`, and Finit decides which format a file is in by reading it: if
 it parses as blocks it is a block file, otherwise it goes to the
 line-based parser.  A file is one format or the other, never a mix.
 Because the two are told apart before either parser commits, a typo
 reports its own file and line instead of being mistaken for the other
 format:
 ```
 parse error: /etc/finit.d/foo.conf:3: no such option 'commnad'
 ```
 The .conf files `/etc/finit.conf` and `/etc/finit.d/*` support many
-directives.  Some are restricted, e.g., only available at bootstrap,
+settings.  Some are restricted, e.g., only available at bootstrap,
 runlevel `S`.  Read on in [Files & Layout](files.md) for more on how
 to structure your .conf files.
@@ -1,13 +1,13 @@
 General Logging
 ===============
-**Syntax:** `log size:200k count:5`
+**Syntax:** `log { size = 200k  count = 5 }`
-Log rotation for run/task/services using the `log` sub-option with
+Log rotation for run/task/services that redirect output to a log file
-redirection to a log file.  Global setting, applies to all services.
+with their own `log` block.  Global setting, applies to all services.
 The size can be given as bytes, without a specifier, or in `k`, `M`,
-or `G`, e.g. `size:10M`, or `size:3G`.  A value of `size:0` disables
+or `G`, e.g. `size = 10M`, or `size = 3G`.  A value of `size = 0` disables
 log rotation.  The default is `200k`.
 The count value is recommended to be between 1-5, with a default 5.
@@ -17,33 +17,48 @@ size limit is reached.
 Redirecting Output
 ------------------
-The `run`, `task`, and `service` stanzas also allow the keyword `log` to
+The `run`, `task`, and `service` blocks take a `log` block of their own,
-redirect `stderr` and `stdout` of the application to a file or syslog
+redirecting `stderr` and `stdout` of the application to a file or syslog
 using the native `logit` tool.  This is useful for programs that do not
 support syslog on their own, which is sometimes the case when running
 in the foreground.
-The full syntax is:
+An empty block means syslog with the defaults, and three keys adjust it:
-    log:/path/to/file
+| Setting | Description |
-    log:prio:facility.level,tag:ident
+|---|---|
-    log:console
+| `file` | Write to this path instead of syslog |
-    log:null
+| `priority` | Syslog `facility.level`, default `daemon.info` |
-    log
+| `identity` | Syslog tag, default the basename of the command |
-Default `prio` is `daemon.info` and default `tag` is the basename of the
+`/dev/console` and `/dev/null` are spelled as the paths they are:
-service or run/task command.
+
    service foo { log { }                       command = "foo" }  # syslog
    service foo { log { file = "/var/log/foo" } command = "foo" }  # a file
    service foo { log { file = "/dev/console" } command = "foo" }  # console
    service foo { log { file = "/dev/null" }    command = "foo" }  # discard
 > [!NOTE]
 > A `log` block at file scope is a different setting -- that one is the
 > global rotation above, and it takes only `size` and `count`.
 Log rotation is controlled using the global `log` setting.
 **Example:**
-    service log:prio:user.warn,tag:ntpd /sbin/ntpd pool.ntp.org -- NTP daemon
+    service ntpd {
        description = "NTP daemon"
        log {
            priority = "user.warn"
            identity = "ntpd"
        }
        command = "/sbin/ntpd pool.ntp.org"
    }
 Output Buffering
 ----------------
-When using the `log` directive, Finit redirects the service's stdout and
+When using the `log` block, Finit redirects the service's stdout and
 stderr to a pipe connected to a logger process.  Programs detect this as
 non-interactive output (i.e., `isatty()` returns false) and typically
 switch from line-buffered to fully-buffered mode.
@@ -53,7 +68,11 @@ directly, so this is rarely an issue.  However, if a service's log
 messages appear delayed or batched, you can force line-buffered output
 by wrapping the command with `stdbuf`:
-    service log /usr/bin/stdbuf -oL /path/to/command -- My service
+    service myservice {
        description = "My service"
        log { }
        command = "/usr/bin/stdbuf -oL /path/to/command"
    }
 The `-oL` option forces line-buffered output, and `-o0` forces unbuffered
 output.  See `stdbuf(1)` for details.
@@ -0,0 +1,267 @@
 Syntax Migration Guide
 ======================
 Finit reads both configuration formats.  Every file is still `*.conf`,
 and the format is detected per file, so a system can be migrated one
 file at a time -- a file is one format or the other, never a mix.
 This guide maps each part of a line-based stanza to its block key.
 The shape of the change:
    service [S12345] <pid/syslogd> env:-/etc/default/klogd name:klogd klogd -n $KLOGD_OPTS -- Kernel log daemon
 becomes
    service klogd {
        description = "Kernel log daemon"
        runlevel    = "S12345"
        conditions  = { "pid/syslogd" }
        envfile     = "-/etc/default/klogd"
        command     = "klogd -n $KLOGD_OPTS"
    }
 The block title is the service identity, shown by `initctl`.  Multiple
 instances spell the ID in the title: `service sshd:1 { ... }`.  The
 legacy bare-ID form, `service :80 ...`, has no equivalent -- the title
 carries both name and ID.
 Positional parts
 ----------------
 | Line-based                       | Block key                                             |
 |----------------------------------|-------------------------------------------------------|
 | `service`, `task`, `run`, `sysv` | same, as block type                                   |
 | `[S12345]`                       | `runlevel = "S12345"`                                 |
 | `<pid/a,net/b>`                  | `conditions = { "pid/a", "net/b" }`                   |
 | `<!pid/a>` on service/sysv       | `conditions = { "pid/a" }` + `reload-signal = "none"` |
 | `<!pid/a>` on run/task           | `conditions = { "pid/a" }` + `required = false`       |
 | `@user:group,extra`              | `user`, `group`, `extra-groups = { "extra" }`         |
 | `name:foo :1`                    | block title `foo:1`                                   |
 | the command and arguments        | `command = "..."`                                     |
 | `-- Description text`            | `description = "..."`                                 |
 The `!` was a flag on the stanza, not a negation, and meant different
 things for daemons and one-shots; each meaning is now its own key.  A
 `~` prefix on a condition is unchanged: `conditions = { "~pid/a" }`.
 Service options
 ---------------
 | Line-based                       | Block key                                        |
 |----------------------------------|--------------------------------------------------|
 | `env:[-]/path`                   | `envfile = "[-]/path"`                           |
 | `pid:/path`                      | `pidfile = "/path"` + `pidfile-create = true`    |
 | `pid:!/path`                     | `pidfile = "/path"`                              |
 | `pid`                            | `pidfile = true` + `pidfile-create = true`       |
 | `log`                            | `log { }`                                        |
 | `log:/path`                      | `log { file = "/path" }`                         |
 | `log:null`, `log:console`        | `log { file = "/dev/null" }`, `"/dev/console"`   |
 | `log:prio:p,tag:t`               | `log { priority = "p"  identity = "t" }`         |
 | `notify:systemd`                 | `notify = "systemd"`                             |
 | `type:forking`                   | `type = "forking"`                               |
 | `manual:yes`                     | `manual-start = true`                            |
 | `remain:yes`                     | `remain-after-exit = true`                       |
 | `restart:always` / `restart:NUM` | `restart = "always"` / `restart-max = NUM`       |
 | `restart_sec:SEC`                | `restart-sec = SEC`                              |
 | `norestart`                      | `restart = "never"`                              |
 | `respawn`                        | `respawn = true`                                 |
 | `oncrash:reboot`                 | `oncrash = "reboot"`                             |
 | `halt:SIG`                       | `stop-signal = "SIG"`                            |
 | `kill:SEC`                       | `stop-timeout = SEC`                             |
 | `pre:[TMO,]/script`              | `exec-start-pre`, `exec-start-pre-timeout`       |
 | `ready:[TMO,]/script`            | `exec-start-ready`, and its `-timeout`           |
 | `stop:[TMO,]/script`             | `exec-stop`, and its `-timeout`                  |
 | `post:[TMO,]/script`             | `exec-stop-post`, and its `-timeout`             |
 | `reload:[TMO,]/script`           | `exec-reload`, and its `-timeout`                |
 | `cleanup:[TMO,]/script`          | `exec-cleanup`, and its `-timeout`               |
 | `caps:^cap_a,%cap_b`             | `capabilities = { "^cap_a", "%cap_b" }`          |
 | `conflict:a,b`                   | `conflicts = { "a", "b" }`                       |
 | `if:svc` / `if:<cond>`           | `if = "svc"` / `if = "cond"`, no angle brackets  |
 | `tty:/dev/x`                     | `tty = "/dev/x"`                                 |
 | `nowarn`                         | leading `-` on `command` or `envfile`            |
 | `restarttmo:`                    | dropped, was already an alias for `restart_sec:` |
 Repeated stanzas
 ----------------
 The line-based format has no titles, so the same service could be
 declared more than once and Finit would sort out which line applied.
 A block title *is* the identity, and two blocks sharing one in the
 same file are rejected.  The two shapes that relied on the repetition
 convert differently.
 **Several candidate binaries for one service.**  The daemon is known
 under more than one name and the stanzas were repeated once per name,
 each with `nowarn` so the ones that were not installed were skipped:
    service nowarn pid:!/run/udevd.pid [S12345789] /lib/systemd/systemd-udevd -- Device event daemon
    service nowarn pid:!/run/udevd.pid [S12345789] udevd -- Device event daemon
 The candidates now go in one block, and Finit starts the first one it
 finds:
    service udevd {
        description = "Device event daemon"
        runlevel    = "S12345789"
        pidfile     = "/run/udevd.pid"
        command     = { "/lib/systemd/systemd-udevd", "-udevd" }
    }
 **One service gated differently per platform.**  The command is the
 same every time, only `if:` and the conditions differ, e.g. a syslog
 daemon that has to wait for whichever hotplug daemon the system has:
    service if:udevd nowarn env:-/etc/default/sysklogd <run/udevadm:5/success> \
           [S0123456789] syslogd -F $SYSLOGD_ARGS -- System log daemon
    service if:mdev  nowarn env:-/etc/default/sysklogd <run/coldplug/success> \
           [S0123456789] syslogd -F $SYSLOGD_ARGS -- System log daemon
 All of these are one service, `syslogd`, and everything downstream
 waits for the one `pid/syslogd` barrier it provides.  That barrier is
 the reason the repetition existed: the title alone spells it, so
 separate titles would rename it.
 Give each variant its own title and name the shared barrier with
 `provides`:
    service syslogd:udev {
        description = "System log daemon"
        runlevel    = "S0123456789"
        if          = "udevd"
        conditions  = { "run/udevadm:5/success" }
        provides    = "pid/syslogd"
        envfile     = "-/etc/default/sysklogd"
        command     = "-syslogd -F $SYSLOGD_ARGS"
    }
    service syslogd:mdev {
        description = "System log daemon"
        runlevel    = "S0123456789"
        if          = "mdev"
        conditions  = { "run/coldplug/success" }
        provides    = "pid/syslogd"
        envfile     = "-/etc/default/sysklogd"
        command     = "-syslogd -F $SYSLOGD_ARGS"
    }
 Whichever variant `if` qualifies asserts `pid/syslogd` on top of its
 own `pid/syslogd:udev`, so downstream blocks need no change.  The `if`
 statements are meant to be mutually exclusive; if two of them do
 qualify, the second claim is refused with a warning and only the first
 variant supplies the barrier.  See [Provided
 Conditions](service-opts.md#provided-conditions).
 `initctl` now knows the variants apart, `initctl status syslogd:udev`,
 and a bare `initctl status syslogd` still lists them all.
 Splitting the variants across files also works, since the ban on
 duplicate titles is per file, as does leaving that one file in the
 line-based format.  Neither is needed for this shape any more.
 Cgroups
 -------
 The standalone `cgroup.NAME` line selected a group for every stanza
 after it in the file, and `cgroup:opts` applied settings to whichever
 group was current.  Neither survives: every block names its own group,
 so nothing depends on what came earlier in the file.
    cgroup.maint
    service [2345] cgroup:cpu.weight:250 foo -- Foo daemon
 becomes
    service foo {
        description = "Foo daemon"
        runlevel    = "2345"
        cgroup maint { cpu.weight = 250 }
        command     = "foo"
    }
 Top-level group declarations keep their name and settings:
    cgroup system cpu.weight:9700 mem.max:10M
 becomes
    cgroup system {
        cpu.weight = 9700
        memory.max = 10M
    }
 TTYs
 ----
 The three positional variants become three key choices:
    tty [12345] /dev/ttyS0 115200 noclear vt220
    tty [12345] /sbin/getty -L ttyS0 115200 vt100
    tty [12345] notty
 become
    tty ttyS0 {
        runlevel = "12345"
        device   = "/dev/ttyS0"
        baud     = 115200
        term     = "vt220"
        noclear  = true
    }
    tty getty {
        runlevel = "12345"
        command  = "/sbin/getty -L ttyS0 115200 vt100"
    }
    tty shell {
        runlevel = "12345"
        notty    = true
    }
 The bare flags keep their names as booleans: `noclear`, `nowait`,
 `nologin`, `passenv`, `rescue`, e.g. `passenv` becomes
 `passenv = true`.
 A `tty` block is named by the device, not the title, so all three above
 show up as `tty:ttyS0` and the like in `initctl`.  The title still has
 to be unique within the file.
 Top-level directives
 --------------------
 | Line-based                       | Block key                                                |
 |----------------------------------|----------------------------------------------------------|
 | `host NAME`, `hostname NAME`     | `hostname = "NAME"`                                      |
 | `module foo args` (repeated)     | `modules = { "foo args", ... }`                          |
 | `network script args`            | `network = "script args"`                                |
 | `runlevel N`                     | `runlevel = N`                                           |
 | `rcsd /path`                     | `rcsd = "/path"`                                         |
 | `runparts [progress] [sysv] DIR` | `runparts = "DIR"`, `runparts-progress`, `runparts-sysv` |
 | `set KEY=VAL` (repeated)         | `environment { KEY = "VAL" }`                            |
 | `log size:100k count:4`          | `log { size = 100k  count = 4 }`                         |
 | `rlimit [hard\|soft] RES LIM`    | `rlimit { hard.res = LIM }`                              |
 | `readiness none`                 | `readiness = "none"`                                     |
 | `reboot-delay N`                 | `reboot-delay = N`                                       |
 | `reboot-watchdog on`             | `reboot-watchdog = true`                                 |
 | `service-interval SEC`           | `service-interval = SEC`                                 |
 | `shutdown script`                | `shutdown = "script"`                                    |
 | `mknod /dev/x c 1 2`             | `mknod = { "/dev/x c 1 2" }`                             |
 | `include /path`                  | `include("/path")`                                       |
 Worth knowing
 -------------
  * Templates work unchanged: `%i` is replaced before the file is
    parsed, so `service serv:%i { ... }` in a `serv@.conf` behaves
    exactly like its legacy counterpart.
  * A list cannot hold comments; the lexer reads entries after a `#`
    regardless.  Put commented-out candidates above the list.
  * `${VAR}` in a value is expanded when the file is read, against
    Finit's environment, and `${VAR:-default}` works too.  An unset
    variable expands to nothing.  A plain `$VAR` is left alone and
    reaches the service, which is what keeps `command = "syslogd -F
    $SYSLOGD_ARGS"` working with an `envfile`.
  * New settings only appear in the block format.  The first are the
    [per-service directories](service-opts.md#service-directories),
    `runtime-dir` and friends, and [`pam`](pam.md).
 For the full description of every key, see the rest of the
 [Configuration](index.md) section.
@@ -0,0 +1,151 @@
 PAM Sessions
 ============
 `pam = "NAME"` runs a service inside a PAM session set up from
 `/etc/pam.d/NAME`.  The `session` stack in that file runs for the
 process that goes on to become the daemon, so modules like `pam_limits`,
 `pam_env`, or `pam_keyinit` see the service the way they see a login.
 ## Basic Usage
 A display server that needs the session a login would have arranged for
 it:
 ```conf
 service weston {
    user    = "weston"
    pam     = "weston-autologin"
    command = "/usr/bin/weston --continue-without-input"
 }
 ```
 With `/etc/pam.d/weston-autologin`:
 ```
 auth     required  pam_permit.so
 account  required  pam_unix.so
 session  required  pam_unix.so
 session  required  pam_limits.so
 ```
 The `auth` line is needed even though nothing is ever authenticated.
 Opening the session goes through `pam_setcred()`, which consults the
 `auth` stack, and an empty stack comes back as a permission denial, so a
 pam.d file with only `account` and `session` lines keeps the service
 from starting.
 The value names a file in `/etc/pam.d`, it is not a path.  A value
 holding `/` or `..`, or one too long to fit, is refused, with an error
 in the log when the .conf file is read.  The service does not start
 either, `initctl status` reports it as missing.  Like the per-service
 directory keys, `pam` exists in the block format only.
 ## No Authentication
 Finit runs the account and session stacks, `pam_acct_mgmt()`,
 `pam_setcred()`, and `pam_open_session()`, and never
 `pam_authenticate()`.  A module that asks a question gets a
 conversation error back and its entry in the stack fails.
 A service whose account is denied, an expired account say, does not
 start, and neither does one naming a pam.d file that is not installed.
 The child exits 71 (`EX_OSERR`), `initctl status` shows the service as
 crashed, and PAM's own reason is in the log.
 ## Requirements
 PAM support is built by default, see [Building Finit](../build.md).
 Without it, e.g. after `--disable-pam`, a service declaring `pam` is
 refused rather than started with the stacks skipped:
    weston: pam weston-autologin requires Finit built with --enable-pam
 ## Which Blocks Take It
 `service`, `task`, `run`, and `sysv`.  Not `tty`: `login` opens a
 session of its own there.
 Every fork gets its own session, so the `pre:`, `post:`, `ready:`, and
 `cleanup:` scripts each open and close one too, as do the stop and
 reload scripts and the `stop` call on a `sysv` script.
 A refused value stops those too.  A `pre:` script forks before the
 start-time check runs, so it exits 71 without running instead of the
 service being reported missing.
 ## The User
 `user` decides who the session is for.  Without it the session is for
 root.
 systemd documents the opposite for its equivalent.  `systemd.exec(5)`
 says `PAMName=` is "only useful in conjunction with the `User=`
 setting, and is otherwise ignored".  That was true of systemd up to and
 including v256, v257 changed it to open a session for the manager's own
 user, and the man page was never updated.  Finit does what v257 does.
 A service with a [controlling tty](tty.md#controlling-tty-for-services)
 has it passed to PAM as `PAM_TTY`, for the modules that care which
 terminal a session is on.
 ## Precedence
 Three places where PAM and a Finit setting cover the same ground:
 - `pam_limits` overrides a per-service `rlimit`.  A block asking for
  `nofile = 4096` under a `limits.conf` that says 512 gets 512.
 - `pam_env` overrides Finit's own environment defaults, `PATH`, `USER`,
  `LOGNAME`, and `HOME`, and `envfile` in turn overrides `pam_env`.  A
  `HOME` from the session stack also moves the working directory, which
  otherwise is the home directory from `/etc/passwd`.
 - The groups from `/etc/group` and `extra-groups` override `pam_group`.
 ## The Session Keeper
 A helper is forked next to the service to close the session when the
 service exits, `(finit-pam)`:
 ```
     CGroup : /system/weston cpu 0 [100, max] mem [--.--, max]
              |- 312 /usr/bin/weston --continue-without-input
              `- 313 (finit-pam)
 ```
 There is one per fork.  It runs as the service's user, in the service's
 cgroup, and stopping the service takes it along.
 A daemon that reaps children in its own `wait()` loop will see a child
 it never forked.  systemd has the same property, with `(sd-pam)`.
 ## Limitations
 - `type = "forking"` closes the session early.  The initial process
  exits by design, the keeper's parent-death signal fires with it, and
  the session is closed while the real daemon runs on.  Finit warns
  about the combination when it reads the .conf file, and starts the
  service anyway:
        /etc/finit.d/foo.conf: foo: pam with type = forking closes the
        session when the initial process exits
 - A daemon whose initial thread exits while the process lives closes the
  session the same way.  The parent-death signal follows the thread that
  forked the keeper, not the process.
 - A capability granted by `pam_cap.so` is only kept when the service
  also sets [`capabilities`](capabilities.md).
 - The keeper shares the service's cgroup, so an empty cgroup directory
  can outlive a stop until the next start reuses it.  Cosmetic.
 - A module that blocks has no time bound.  `pam_open_session()` waits
  for as long as the module does, `pam_ldap` against an unreachable
  server, say, or `pam_mount` on a hung network mount.  The fork has already succeeded by then, so the service
  reaches the running state and stays there with no daemon behind it.
  Nothing crashes and nothing restarts.
 ## See Also
 - [Service Options](service-opts.md) - the other run/task/service keys
 - [Linux Capabilities](capabilities.md) - the key `pam_cap.so` needs
 - [Building Finit](../build.md) - `--disable-pam` and its dependency
 - [pam(8)](https://man7.org/linux/man-pages/man8/pam.8.html) - the PAM library
 - [pam.d(5)](https://man7.org/linux/man-pages/man5/pam.d.5.html) - the file format
 - [pam_limits(8)](https://man7.org/linux/man-pages/man8/pam_limits.8.html) - limits from `limits.conf`
@@ -47,16 +47,23 @@ system administrator.
 The bundled default `rescue.conf` contains nothing more than:
-    runlevel 1
+    runlevel = 1
-    tty [12345] rescue
+    tty rescue {
        runlevel = "12345"
        rescue   = true
    }
-The `tty` has the `rescue` option set, which works similar to the board
+The `tty` block has `rescue` set, which works similar to the board
-bring-up tty option `notty`.  The major difference being that `sulogin`
+bring-up setting `notty`.  The major difference being that `sulogin`
 is started to query for root/admin password.  If `sulogin` is not found,
 `rescue` behaves like `notty` and gives a plain root shell prompt.
-If Finit cannot find `/lib/finit/rescue.conf` it defaults to:
+If Finit cannot find `/lib/finit/rescue.conf` it falls back to a
 built-in equivalent, which runs in every runlevel it can:
-    tty [12345] rescue
+    tty rescue {
        runlevel = "12345789"
        rescue   = true
    }
 There is no way to exit the *fallback* rescue mode.
@@ -26,12 +26,20 @@ the lifetime of your system.
 Example:
-    task [S] /lib/console-setup/console-setup.sh
+    task console-setup {
-    service [S12345] env:-/etc/default/rsyslog rsyslogd -n $RSYSLOGD_ARGS
+        runlevel = "S"
        command  = "/lib/console-setup/console-setup.sh"
    }
    service rsyslogd {
        runlevel = "S12345"
        envfile  = "-/etc/default/rsyslog"
        command  = "rsyslogd -n $RSYSLOGD_ARGS"
    }
 When bootstrap has completed, Finit moves to runlevel 2.  This can be
-changed in `/etc/finit.conf` using the `runlevel N` directive, or by a
+changed in `/etc/finit.conf` with `runlevel = N`, or by a script running
-script running in runlevel S that calls, e.g., `initctl runlevel 9`.
+in runlevel S that calls, e.g., `initctl runlevel 9`.
 The latter is useful if startup scripts detect problems outside of
 Finit's control, e.g., critical services/devices missing or hardware
 problems.
@@ -44,7 +52,7 @@ complete before proceeding to 2.
 Finit first stops everything that is not allowed to run in 2, and then
 brings up networking.  Networking is expected to be available in all
 runlevels except: S, 1 (single user level), 6, and 0.  Networking is
-enabled either by the `network script` directive, or if you have an
+enabled either by `network = "script"`, or if you have an
 `/etc/network/interfaces` file, Finit calls `ifup -a` -- at the very
 least the loopback interface is brought up.
@@ -58,7 +66,7 @@ least the loopback interface is brought up.
 Runlevel Configuration
 ----------------------
-**Syntax:** `runlevel <N>`
+**Syntax:** `runlevel = N`
 The system runlevel to go to after bootstrap (S) has completed.  `N` is
 the runlevel number 0-9, where 6 is reserved for reboot and 0 for halt.
@@ -76,11 +84,11 @@ Finit disables networking in this mode.
 Networking
 ----------
-**Syntax:** `network <PATH>`
+**Syntax:** `network = "PATH"`
 Script or program to bring up networking, with optional arguments.
-Deprecated.  We recommend using dedicated task/run stanzas per runlevel,
+Deprecated.  We recommend using dedicated task/run blocks per runlevel,
 or `/etc/network/interfaces` if you have a system with `ifupdown`, like
 Debian, Ubuntu, Linux Mint, or an embedded BusyBox system.
@@ -90,7 +98,7 @@ Debian, Ubuntu, Linux Mint, or an embedded BusyBox system.
 System Hostname
 ---------------
-**Syntax:** `host <NAME>`, or `hostname <NAME>`
+**Syntax:** `hostname = "NAME"`
 Set system hostname to NAME, unless `/etc/hostname` exists in which case
 the contents of that file is used.
@@ -103,16 +111,24 @@ Deprecated.  We recommend using `/etc/hostname` instead.
 Kernel Modules
 --------------
-**Syntax:** `module <MODULE> [ARGS]`
+**Syntax:** `modules = { "MODULE [ARGS]", ... }`, alias `mod`
-Load a kernel module, with optional arguments.  Similar to `insmod`
+Load kernel modules, each with optional arguments.  Similar to the
-command line tool.
+`insmod` command line tool.
    modules = { "button", "evdev", "softdog" }
 > [!NOTE]
 > A list cannot hold comments; the lexer reads the entries after a `#`
 > regardless.  Put commented-out candidates above the list.
 Deprecated, there is both a `modules-load.so` and a `modprobe.so` plugin
 that can handle module loading better.  The former supports loading from
 `/etc/modules-load.d/`, the latter uses kernel modinfo to automatically
-load (or coldplug) every required module.  For hotplug we recommend the
+load (or coldplug) every required module.  Hotplug module loading is
-BusyBox mdev tool, add to `/etc/mdev.conf`:
+handled by [keventd](../keventd.md), the built-in device manager.  On
 systems using the hotplug plugin with BusyBox mdev instead, add to
 `/etc/mdev.conf`:
    $MODALIAS=.*  root:root       0660    @modprobe -b "$MODALIAS"
@@ -122,9 +138,9 @@ BusyBox mdev tool, add to `/etc/mdev.conf`:
 Resource Limits
 ---------------
-**Syntax:** `rlimit [hard|soft] RESOURCE <LIMIT|unlimited>`
+**Syntax:** `rlimit { RESOURCE = LIMIT }`, with `soft.` or `hard.` prefix
-Set the hard or soft limit for a resource, or both if that argument is
+Set the hard or soft limit for a resource, or both if the prefix is
 omitted.  `RESOURCE` is the lower-case `RLIMIT_` string constants from
 `setrlimit(2)`, without prefix.  E.g. to set `RLIMIT_CPU`, use `cpu`.
@@ -134,23 +150,23 @@ or the kernel `/proc/PID/limits` file, for details.  Finit versions
 before v3.1 used `infinity` for `unlimited`, which is still supported,
 albeit deprecated.
-    # No process is allowed more than 8MB of address space
+    rlimit {
-    rlimit hard as 8388608
+        hard.as   = 8388608    # no more than 8MB of address space
-
+        soft.core = unlimited  # core dumps may be arbitrarily large
-    # Core dumps may be arbitrarily large
+        cpu       = 10         # soft & hard = 10 sec
-    rlimit soft core infinity
+    }
    # CPU limit for all services, soft & hard = 10 sec
    rlimit cpu 10
 `rlimit` can be set globally, in `/etc/finit.conf`, or locally per
 each `/etc/finit.d/*.conf` read.  I.e., a set of task/run/service
-stanzas can share the same rlimits if they are in the same .conf.
+blocks can share the same rlimits if they are in the same .conf.
 For a service with [`pam`](pam.md), `pam_limits` runs after these
 limits are applied, so `limits.conf` has the last word.
 Miscellaneous Settings
 ----------------------
-**Syntax:** `reboot-delay <0-60>`
+**Syntax:** `reboot-delay = 0-60`
 Optional delay at reboot (or shutdown or halt) to allow kernel
 filesystem threads to complete after calling `sync(2)` before
@@ -168,7 +184,7 @@ sync(2) has been called, twice.
 > writing; it can actually take a short time before all the blocks are
 > finally written.
-**Syntax:** `reboot-watchdog <on|off|true|false|1|0>`
+**Syntax:** `reboot-watchdog = true|false`
 Controls whether the system should reboot via the watchdog timer (WDT)
 or directly via the SoC/kernel.  When enabled, Finit will:
@@ -1,7 +1,7 @@
 Run-parts Scripts
 -----------------
-**Syntax:** `runparts [progress] [sysv] <DIR>`
+**Syntax:** `runparts = "DIR"`
 Call [run-parts(8)][] on `DIR` to run start scripts.  All executable
 files in the directory are called, in alphabetic order.  The scripts in
@@ -14,9 +14,10 @@ whatever the next runlevel is set to be (default 2).  E.g., generate a
 **Options:**
- - `progress`: display the progress of each script being executed
+ - `runparts-progress = true`: display the progress of each script being
- - `sysv`: run only SysV style scripts, i.e., `SNNfoo`, or `KNNbar`,
+   executed
-   where `NN` is a number (0-99).
+ - `runparts-sysv = true`: run only SysV style scripts, i.e., `SNNfoo`,
   or `KNNbar`, where `NN` is a number (0-99).
 If global debug mode is enabled, the `runparts` program is also called
 with the debug flag.
@@ -24,7 +25,7 @@ with the debug flag.
 **Limitations:**
 Scripts called from `runparts`, or hook scripts (see below), are limited
-in their interaction with Finit.  Like the standalone `run` stanza and
+in their interaction with Finit.  Like a standalone `run` block and
 the `/etc/rc.local` shell script, Finit waits for their completion
 before continuing.  None of them can issue commands to start, stop, or
 restart other services.  Also, ensure all your services and programs
@@ -39,13 +40,13 @@ either terminate or start in the background or you will block Finit.
 It can be beneficial to use `01-name`, `02-othername`, etc., to ensure
 the scripts are started in that order, e.g., if there is a dependency
-order between scripts.  Symlinks to existing daemons can talso be used,
+order between scripts.  Symlinks to existing daemons can also be used,
 but make sure they daemonize (background) themselves properly, otherwise
 Finit will lock up.
 If `S[0-9]foo` and `K[0-9]bar` style naming is used, the executable will
 be called with an extra argument, `start` and `stop`, respectively.
 E.g., `S01foo` will be called as `S01foo start`.  Of course, `S01foo`
-and `K01foo` may be a symlink to to `another/directory/foo`.
+and `K01foo` may be a symlink to `another/directory/foo`.
 [run-parts(8)]: http://manpages.debian.org/cgi-bin/man.cgi?query=run-parts
@@ -13,7 +13,12 @@ file `/etc/default/foo`.  Like this:
 * `/etc/finit.conf`:
-        service [2345] env:-/etc/default/foo foo -n $FOO_OPTIONS -- Example foo daemon
+        service foo {
            description = "Example foo daemon"
            runlevel    = "2345"
            envfile     = "-/etc/default/foo"
            command     = "foo -n $FOO_OPTIONS"
        }
 Here the service `foo` is started with `-n`, to make sure it runs in the
 foreground, and the with the options found in the environment file.  With
@@ -22,6 +27,11 @@ the `ps` command we can see that the process is started with:
    foo -n --extra-arg=bar -s -x
 > [!NOTE]
-> The leading `-` in `env:` determines if Finit should treat a missing
+For a service with [`pam`](pam.md), the session environment is applied
-> environment file as blocking the start of the service or not.  When
+before `envfile`, so the file overrides anything `pam_env` set.
-> `-` is used, a missing environment file does *not* block the start.
+
 > The leading `-` on `envfile` determines if Finit should treat a
 > missing environment file as blocking the start of the service or not.
 > When `-` is used, a missing environment file does *not* block the
 > start.  The same mark works on `command`, where it means carry on if
 > the binary is missing.
@@ -1,21 +1,22 @@
 Service Options
 ===============
-The run/task/tty/service/sysv directives take modifiers, or options, to
+The `run`, `task`, `tty`, `service` and `sysv` blocks take settings as
-control their behavior.  This section lists them with their limitations.
+keys.  This section lists them with their limitations.
 All modifiers must be placed between the directive and its command.
-The name of a service, shown by the `initctl` tool, defaults to the
+The name of a service, shown by the `initctl` tool, is the block title.
-basename of the service executable. It can be changed with the `name:`
+It defaults to the basename of the executable if the title is omitted:
 option:
-    name:<service-name>
+    service sshd {
        command = "/usr/sbin/sshd -D"
    }
-For multiple instances of a service, with the same `name`, set the
+For multiple instances of a service, with the same name, add an
-identifier `:ID` to prevent Finit from replacing previous instances:
+identifier after a colon to prevent Finit from replacing previous
 instances:
-    service name:ssdp :eth1 ssdpd eth1 -- Windows discovery on eth1
+    service ssdp:eth1 { command = "ssdpd eth1" }
-    service name:ssdp :eth2 ssdpd eth2 -- Windows discovery on eth2
+    service ssdp:eth2 { command = "ssdpd eth2" }
 The [`initctl`](../initctl.md) tool will list these two services as:
@@ -23,106 +24,295 @@ The [`initctl`](../initctl.md) tool will list these two services as:
 - ssdp:eth2
 Conflicting services that must be prevented from starting, use the
-`conflict:` option:
+`conflicts` key:
-    service [S12345789] udevd -- Device event management daemon
+    service udevd { command = "udevd" }
-	run [S] conflict:udevd mdev -s -- Populating device tree
+    run mdev {
        runlevel  = "S"
        conflicts = { "udevd" }
        command   = "mdev -s"
    }
-Multiple conflicting services can be separated using `,`:
+The list may name several, and an instance is named the same way it is
 declared:
-    service :1 abc
+    service abc:1 { command = "abc 1" }
-    service :2 abc
+    service abc:2 { command = "abc 2" }
-	service conflict:abc:1,abc:2 cde
+    service cde   { conflicts = { "abc:1", "abc:2" }  command = "cde" }
-If a service should not be automatically started, it can be configured
+If a service should not be automatically started, set `manual-start`.
-as manual with the optional `manual` argument. The service can then be
+It can then be started at any time with `initctl start <service>`:
 started at any time by running `initctl start <service>`.
-    manual:yes
+    service lldpd {
        manual-start = true
        command      = "/usr/sbin/lldpd -d"
    }
-Other run/task/service options are:
+Other run/task/service settings are:
-  * `caps:...` -- see the [Linux Capabilities](capabilities.md) section
+  * `capabilities` -- see the [Linux Capabilities](capabilities.md) section
-  * `cgroup.NAME[,opts]` or `cgroup:opts` -- see the [Cgroups](cgroups.md) section
+  * `cgroup NAME {}` -- see the [Cgroups](cgroups.md) section
-  * `env:[-]/path/to/env` -- see the [Service Environment](service-env.md) section
+  * `envfile` -- see the [Service Environment](service-env.md) section
-  * `log:...` -- see [Redirecting Output](logging.md#redirecting-output)
+  * `log {}` -- see [Redirecting Output](logging.md#redirecting-output)
-  * `nowarn` -- see [Conditional Loading](services.md#conditional-loading)
+  * `tty` -- see [Controlling TTY](tty.md#controlling-tty-for-services)
-  * `notify:...` -- see [Service Synchronization](service-sync.md)
+  * `notify` -- see [Service Synchronization](service-sync.md)
-  * `if:...` -- see [Conditional Execution](services.md#conditional-execution)
+  * `pam` -- see the [PAM Sessions](pam.md) section
-  * `type:forking` -- see description of the [service](services.md) directive
+  * `if` -- see [Conditional Execution](services.md#conditional-execution)
  * `type = "forking"` -- see description of the [service](services.md) block
  * a leading `-` on `command` -- see
    [Conditional Loading](services.md#conditional-loading)
-As mentioned previously, services are automatically started, restarted,
+Command Candidates
-and stopped, depending on the configuration and conditions.  Within the
+------------------
 confines of that the following options are available:
-  * `restart:NUM` -- number of times Finit tries to restart a crashing
+The `command` setting may list several candidates for the same
-    service, default: 10, max: 255.  When this limit is reached the
+service, in which case Finit starts the first one it finds:
    service udevd {
        command = { "/lib/systemd/systemd-udevd", "-udevd" }
    }
 A candidate that is not installed is skipped without a warning, that
 is the point of listing more than one.  The leading `-` is read from
 the candidate that wins, or from the last one when none are found, so
 a block with a single command behaves as it always has.
 The candidates are alternative spellings of one service, not a
 fallback for a service that fails to start.  Finit chooses when the
 .conf file is read and does not revisit the choice.
 A [`tty`](tty.md) block takes the same list, where the candidates are
 the getty to run:
    tty ttyAMA0 {
        command = { "/sbin/agetty -L ttyAMA0 115200 vt100",
                    "/sbin/getty -L 115200 /dev/ttyAMA0 vt100" }
    }
 Provided Conditions
 -------------------
 A service always asserts `pid/<ident>` for itself, named after the
 block title.  `provides` names conditions it asserts in addition to
 that one:
    service syslogd:udev {
        if       = "udevd"
        provides = "pid/syslogd"
        command  = "syslogd -F"
    }
 This is what lets variants of one service, picked apart by
 [`if`](services.md#conditional-execution), share the barrier that
 everything downstream waits for.  Each variant has its own title, so
 each is its own service to `initctl`, while the condition they publish
 stays the same.
 Any namespace works, `pid/`, `usr/`, `service/`, since the point is
 publishing a name existing configuration already waits on.  A value
 without a namespace separator is not a condition and is rejected.  The
 list holds at most four.
 A provided condition is asserted and cleared with the service, exactly
 like its own, so stopping the provider clears the barrier.
 Two services cannot supply the same condition.  The second claim is
 refused, with the owner named:
    finit.conf: second: provides condition <usr/barrier> already registered by service first, ignoring
 The service itself still registers and runs, only the claim is
 dropped.  Which one is "first" is .conf load order, so it follows the
 file names, see [Files & Layout](files.md).
 A real identity outranks a claim on it.  `provides = "pid/sshd"` in a
 system that also runs a service titled `sshd` loses to that service,
 because `pid/<ident>` is how Finit tracks the service itself.
 `initctl cond dump` names the owner of every condition, which for a
 provided one is the service that claimed it:
    $ initctl cond dump
    PID    IDENT         STATUS  CONDITION
    1234   syslogd:udev  on      <pid/syslogd>
    1234   syslogd:udev  on      <pid/syslogd:udev>
 Duplicate Titles
 ----------------
 The title is the service identity, so two blocks sharing a title in
 one file are two declarations of one service.  The parser underneath
 merges them without a word, leaving a single service holding a mix of
 both, so Finit rejects the file and names the title:
    /etc/finit.d/hotplug.conf:12: found duplicate title 'udevd'
 Nothing from a rejected file is loaded and the rest of the
 configuration is unaffected.
 The same title in *another* file is fine.  That is how a system .conf
 is overridden, the later file wins, see [Files & Layout](files.md).
 Two shapes need a single identity and used to be written as repeated
 declarations.  One is a service with several candidate binaries, which
 is now a [command list](#command-candidates).  The other is a service
 gated differently per platform, e.g. a syslog daemon waiting for
 whichever hotplug daemon the system happens to have.  For that one,
 give each variant its own file, or keep them as one-liners in the
 line-based format, which has no titles.  The [migration
 guide](migration.md) works through it.
 Restarting
 ----------
 Services are automatically started, restarted, and stopped, depending
 on the configuration and conditions.  Within the confines of that the
 following settings are available:
  * `restart-max = NUM` -- number of times Finit tries to restart a
    crashing service, default: 10.  When this limit is reached the
    service is marked *crashed* and must be restarted manually with
    `initctl restart NAME`
-  * `restart_sec:SEC` -- number of seconds before Finit tries to restart
+  * `restart-sec = SEC` -- number of seconds before Finit tries to
-    a crashing service, default: 2 seconds for the first five retries,
+    restart a crashing service.  The default is 2 seconds for the first
-	then back-off to 5 seconds.  The maximum of this configured value
+    half of `restart-max` attempts, then a back-off to 5 seconds -- with
-	and the above (2 and 5) will be used
+    the default `restart-max` that is the first five retries.  The
-  * `restart:always` -- no upper limit on the number of times Finit
+    greater of this configured value and the back-off is used
-    tries to restart a crashing service.  Same as `restart:-1`
+  * `restart = "always"` -- no upper limit on the number of times Finit
-  * `norestart` -- dont restart on failures, same as `restart:0`
+    tries to restart a crashing service
-  * `respawn` -- bypasses the `restart` mechanism completely, allows
+  * `restart = "never"` -- do not restart on failures.  `false` is
-    endless restarts.  Useful in many use-cases, but not what `service`
+    accepted as a synonym, and `true` selects the default policy
-    was originally designed for so not the default behavior
+  * `respawn = true` -- bypasses the `restart` mechanism completely,
-  * `remain:yes` -- for `run` and `task` only.  Prevents the task from
+    allowing endless restarts.  Exiting is treated as normal work
-    re-running on runlevel re-entry and ensures the `post:` script runs
+    rather than failure, so the service is restarted at once instead of
-    when the task is explicitly stopped or leaves its valid runlevels.
+    being counted and delayed.  This is how a `tty` behaves; it is not
-    Similar to systemd's `RemainAfterExit=yes`.  See [Task and Run](task-and-run.md)
+    what `service` was designed for, so it is not the default
-    for more details
+  * `remain-after-exit = true` -- for `run` and `task` only.  Prevents
-  * `oncrash:reboot` -- when all retries have failed, and the service
+    the task from re-running on runlevel re-entry and ensures the
-    has *crashed*, if this option is set the system is rebooted
+    `exec-stop-post` script runs when the task is explicitly stopped or
-  * `oncrash:script` -- similarly, but instead of rebooting, call the
+    leaves its valid runlevels.  This is systemd's `RemainAfterExit=`.
-    `post:script` action with exit code `crashed`, see below
+    See [Task and Run](task-and-run.md) for more details
-  * `reload:'script [args]'` -- some services do not support `SIGHUP` but
+  * `oncrash = "reboot"` -- when all retries have failed, and the
-    may have other ways to update the configuration of a running daemon.
+    service has *crashed*, the system is rebooted
-    When `reload:script` is defined it is preferred over `SIGHUP`.  Like
+  * `oncrash = "script"` -- similarly, but instead of rebooting, call
-	systemd, Finit sets `$MAINPID` as a convenience to scripts, which in
+    the `exec-stop-post` script with exit code `crashed`, see below
 	effect also allow `reload:'kill -HUP $MAINPID'`
  * `stop:'script [args]'` -- some services may require alternate methods
    to be stopped.  If a `stop:script` is defined it is preferred over
    `SIGTERM` and `stop`, for `service` and `sysv`, respectively.
 	Similar to `reload:script`, Finit sets `$MAINPID`
-> [!CAUTION]
+Service directories
-> Both `reload:script` and `stop:script` are called as PID 1, without
+-------------------
 > any timeout!  Meaning, it is up to you to ensure the script is not
 > blocking for seconds at a time or never terminates.
-When stopping a service (run/task/sysv/service), either manually or when
+Five settings ask Finit to create a directory for the service before it
-moving to another runlevel, Finit starts by sending `SIGTERM`, to allow
+starts, owned by its `user` and `group`, mode 0755.  The value is a
-the process to shut down gracefully (unless a `stop:'script'` is used).
+directory name, resolved under a fixed base -- absolute paths and `..`
-However, if the process has not been collected within 3 seconds, Finit
+are refused:
 will send `SIGKILL`.  To stop the process using a different signal than
 `SIGTERM`, use `halt:SIGNAL`, e.g., `halt:SIGPWR`.  To change the delay
 between the stop signal and KILL, use the option `kill:<1-60>`, e.g.,
 `kill:10` to wait 10 seconds before sending `SIGKILL`.
-Services, including the `sysv` variant, support pre/post/ready and
+| Setting | Base | Environment variable |
-cleanup scripts:
+|---|---|---|
 | `runtime-dir` | `/run` | `RUNTIME_DIRECTORY` |
 | `state-dir` | `/var/lib` | `STATE_DIRECTORY` |
 | `cache-dir` | `/var/cache` | `CACHE_DIRECTORY` |
 | `logs-dir` | `/var/log` | `LOGS_DIRECTORY` |
 | `config-dir` | `/etc` | `CONFIGURATION_DIRECTORY` |
-  * `pre:[0-3600,]script` -- called before the sysv/service is stated
+Each resolved path is exported to the process environment under the
-  * `post:[0-3600,]script` -- called after the sysv/service has stopped
+listed name, the same names systemd uses for `RuntimeDirectory=` and
-  * `ready:[0-3600,]script` -- called when the sysv/service is ready
+friends.  As in systemd, `config-dir` is the odd one out: it is created
-  * `cleanup:[0-3600,]script` -- called when run/task/sysv/service is removed
+but never chowned.
-The optional number (0-3600) is the timeout before Finit kills the
+Each takes a matching `-mode`, e.g. `runtime-dir-mode = 0700`, default
-script, it defaults to the kill delay value and can be disabled by
+0755.  Modes are octal, with the leading zero.
-setting it to zero.  These scripts run as the same `@USER:GROUP` as the
+
-service itself, with any `env:file` sourced.  The scripts are executed
+The mode of the named directory is locked down again on every start.
-from the `$HOME` of the given user.  The scripts are not called with any
+Its contents are left alone as long as the owner is right; if the owner
-argument, but get a set of environment variables:
+has drifted, everything under it is chowned back.
 The runtime directory is removed again when the service stops, after
 any `exec-stop-post` script has run; `/run` is a tmpfs so it would not
 survive a reboot anyway.  The other four persist.  A completed `run` or
 `task` counts as stopped, unless `remain-after-exit` keeps it alive
 until stopped for real.  `runtime-dir-preserve` adjusts this, same
 values as systemd's `RuntimeDirectoryPreserve=`:
  * `"no"` -- removed when the service stops, the default
  * `"restart"` -- kept across restarts, removed on a real stop
  * `"yes"` -- never removed
 This is what lets a service drop privileges and still create, and
 later touch, its own PID file:
    service ntpd {
        user        = "ntp"
        group       = "ntp"
        runtime-dir = "ntpd"
        pidfile     = "/run/ntpd/ntpd.pid"
        command     = "/usr/sbin/ntpd -n -p /run/ntpd/ntpd.pid"
    }
 These settings exist only in the block format.
 Stopping and reloading
 ----------------------
 When stopping a service, either manually or when moving to another
 runlevel, Finit starts by sending `SIGTERM` to let the process shut
 down gracefully.  If it has not been collected within 3 seconds,
 `SIGKILL` follows.  Both ends of that are configurable:
  * `stop-signal = "SIGPWR"` -- send this instead of `SIGTERM`
  * `stop-timeout = 10` -- seconds to wait before `SIGKILL`, 1-300
 Some services need more than a signal:
  * `exec-stop = "script [args]"` -- run instead of sending the stop
    signal, and instead of `stop` for `sysv`
  * `exec-reload = "script [args]"` -- run instead of sending `SIGHUP`.
    Like systemd, Finit sets `$MAINPID` as a convenience to scripts,
    which in effect also allows `exec-reload = "kill -HUP $MAINPID"`
 If a daemon cannot be reloaded with a signal at all, say so and Finit
 restarts it instead:
    service dropbear {
        reload-signal = "none"
        command       = "/usr/sbin/dropbear -R -F"
    }
 `SIGHUP` is the default and the only other accepted value, with or
 without the `SIG` prefix and in any case.
 Scripts
 -------
 Services, including the `sysv` variant, support six lifecycle scripts:
  * `exec-start-pre` -- called before the sysv/service is started
  * `exec-start-ready` -- called when the sysv/service is ready
  * `exec-stop` -- called instead of the stop signal
  * `exec-stop-post` -- called after the sysv/service has stopped
  * `exec-reload` -- called instead of `SIGHUP`
  * `exec-cleanup` -- called when run/task/sysv/service is removed
 Each takes a matching `-timeout`, in seconds, 0-3600, after which Finit
 kills the script.  It defaults to the `stop-timeout` value and can be
 disabled by setting it to zero:
    service foo {
        exec-start-pre         = "/etc/foo/pre.sh"
        exec-start-pre-timeout = 10
        command                = "/usr/sbin/foo"
    }
 These scripts run as the same user and group as the service itself,
 with any `envfile` sourced.  They are executed from the `$HOME` of the
 given user.  The scripts are not called with any argument, but get a
 set of environment variables:
  * `SERVICE_IDENT=foo:1`
  * `SERVICE_NAME=foo`
  * `SERVICE_ID=1`
-The `post:script` is called with an additional set of environment
+The `exec-stop-post` script is called with an additional set of
-variables.  Yes, the text is correct, the naming was an accident:
+environment variables.  Yes, the text is correct, the naming was an
 accident:
 - `EXIT_CODE=[exited,signal,crashed]`: normal exit, signaled, or
   crashed
@@ -130,11 +320,13 @@ variables.  Yes, the text is correct, the naming was an accident:
   the program, if it exited normally, or the signal name (`HUP`,
   `TERM`, etc.) if it exited due to signal
-When a run/task/sys/service is removed (disable + reload) it is first
+When a run/task/sysv/service is removed (disable + reload) it is first
-stopped and then removed from the runlevel.  The `post:script` always
+stopped and then removed from the runlevel.  The `exec-stop-post`
-runs when the process has stopped, and the `cleanup:script` runs when
+script always runs when the process has stopped, and `exec-cleanup`
-the the stanza has been removed from the runlevel.
+runs when the block has been removed from the runlevel.
 > [!IMPORTANT]
 > These script actions are intended for setup, cleanup, and readiness
-> notification.  It is up to the user to ensure the scripts terminate.
+> notification.  A script that outlives its timeout is killed, so pick
 > one that suits the work, or set it to zero to opt out and take
 > responsibility for the script terminating.
@@ -32,28 +32,35 @@ notification is available, and the native PID file mode of operation is,
 as of Finit v4.6 optional, by default it is still enabled, but this can
 be changed in `finit.conf`:
-    readiness none
+    readiness = "none"
 This will be made the default in Finit 5.0.  In this mode of operation,
 every service needs to explicitly declare their readiness notification,
 like this:
-    service notify:pid     watchdogd
+    service watchdogd { notify = "pid"      command = "watchdogd" }
-    service notify:systemd foo
+    service foo       { notify = "systemd"  command = "foo"       }
-    service notify:s6      bar
+    service bar       { notify = "s6"       command = "bar"       }
-    service notify:none    qux
+    service qux       { notify = "none"     command = "qux"       }
-The `notify:none` syntax is for completeness in systems which run in
+The `notify = "none"` setting is for completeness in systems which run
-`readiness pid` mode (default).  Services declared with `notify:none`
+in `readiness = "pid"` mode (default).  Services declared with
-will transition to ready as soon as Finit has started them, e.g.,
+`notify = "none"` will transition to ready as soon as Finit has started
-`service/qux/ready`.
+them, e.g., `service/qux/ready`.
 To synchronize two services the following condition can be used:
-    service notify:pid                 watchdogd
+    service watchdogd {
-    service <service/watchdogd/ready>  stress-ng --cpu 8
+        notify  = "pid"
        command = "watchdogd"
    }
-For details on the syntax and options, see below.
+    service stress-ng {
        conditions = { "service/watchdogd/ready" }
        command    = "stress-ng --cpu 8"
    }
 For the full list of conditions, see [Finit Conditions](../conditions.md).
 > [!NOTE]
 > On `initctl reload` conditions are set in "flux", while figuring out
@@ -66,7 +73,7 @@ For details on the syntax and options, see below.
 > However, the s6 notify mode does not support this because in s6 you
 > are expected to close your notify descriptor after having written
 > `\n`.  This means s6 style daemons currently must be stop-started.
-> (Declare the service with `<!>` in its condition statement.)
+> (Declare the service with `reload-signal = "none"`.)
 >
 > For default, PID file style readiness notification, daemons are
 > expected to either create their PID files, or touch it using
@@ -7,14 +7,19 @@ use a wrapper shell script to start your service.
 The Finit service `.conf` file can be put into `/etc/finit.d/available`,
 so you can control the service using `initctl`.  Then use the path to
-the wrapper script in the Finit `.conf` service stanza.  The following
+the wrapper script in the Finit `.conf` service block.  The following
 example employs a wrapper script in `/etc/start.d`.
 **Example:**
 * `/etc/finit.d/available/program.conf`:
-        service [235] <!> /etc/start.d/program -- Example Program
+        service program {
            description   = "Example Program"
            runlevel      = "235"
            reload-signal = "none"
            command       = "/etc/start.d/program"
        }
 * `/etc/start.d/program:`
@@ -26,6 +31,6 @@ example employs a wrapper script in `/etc/start.d`.
        exec /usr/bin/program $OPTIONS
 > [!NOTE]
-> The example sets `<!>` to denote that it doesn't support `SIGHUP`.
+> The example sets `reload-signal = "none"` to say the program does not
-> That way Finit will stop/start the service instead of sending SIGHUP
+> support `SIGHUP`.  Finit then stop/starts the service instead of
-> at restart/reload events.
+> signalling it at restart/reload events.
@@ -1,16 +1,17 @@
 Services
 ========
-**Syntax:** `service [LVLS] <COND> /path/to/daemon ARGS -- Optional description`
+**Syntax:** `service NAME { command = "/path/to/daemon ARGS" }`
 Service, or daemon, to be monitored and automatically restarted if it
 exits prematurely.  Finit tries to restart services that die, by default
 10 times before giving up and marking them as *crashed*.  After which
 they have to be manually restarted with `initctl restart NAME`.  The
-limits controlling this are configurable, see the options below.
+limits controlling this are configurable, see
 [Service Options](service-opts.md).
 > [!TIP]
-> To allow endless restarts, see the [`respawn` option](service-opts.md)
+> To allow endless restarts, see [`respawn`](service-opts.md#restarting)
 For daemons that support it, we recommend appending `--foreground`,
 `--no-background`, `-n`, `-F`, or similar command line argument to
@@ -19,73 +20,105 @@ the most reliable way to monitor a service.
 However, not all daemons support running in the foreground, or they may
 start logging to the foreground as well, these are forking daemons and
-are supported using the same syntax as forking `sysv` services, using
+are supported using the same syntax as forking `sysv` services, by
-the `pid:!/path/to/pidfile.pid` syntax.  There is an alternative syntax
+naming the file to watch with `pidfile`.  There is an alternative that
-that may be more intuitive, where Finit can also guess the PID file
+may be more intuitive, where Finit can also guess the PID file based on
-based on the daemon's command name:
+the daemon's command name:
-    service type:forking ntpd -- NTP daemon
+    service ntpd {
        description = "NTP daemon"
        type        = "forking"
        command     = "ntpd"
    }
 This example lets BusyBox `ntpd` daemonize itself.  Finit uses the
 basename of the binary to guess the PID file to watch for the PID:
-`/var/run/ntpd.pid`.  If Finit guesses wrong, you have to submit the
+`/var/run/ntpd.pid`.  If Finit guesses wrong, name the file yourself
-full `pid:!/path/to/file.pid`.
+with `pidfile = "/path/to/file.pid"`.
 The file belongs to the service: Finit reads it but does not create or
 remove it.  That is the default, and `pidfile-create = true` is what
 asks Finit to write the file instead.  The one exception is *stale*
 cleanup — if the service dies without removing its own pidfile
 (SIGKILL, OOM, segfault), and the file still names the just-reaped
 PID, Finit removes it before the next retry.  This prevents daemons
 that refuse to start on an existing pidfile (e.g. `dbus-daemon`)
 from getting stuck in a crash-restart loop.
 **Example:**
 In the case of `ospfd` (below), we omit the `-d` flag (daemonize) to
 prevent it from forking to the background:
-    service [2345] <pid/zebra> /sbin/ospfd -- OSPF daemon
+    service ospfd {
        description = "OSPF daemon"
        runlevel    = "2345"
        conditions  = { "pid/zebra" }
        command     = "/sbin/ospfd"
    }
-`[2345]` denote the runlevels `ospfd` is allowed to run in, they are
+`runlevel` denotes the runlevels `ospfd` is allowed to run in, it is
-optional and default to level 2-5 if omitted.
+optional and defaults to level 2-4 if omitted.
 `<...>` is the condition for starting `ospfd`.  In this example Finit
 waits for another service, `zebra`, to have created its PID file in
 `/var/run/quagga/zebra.pid` before starting `ospfd`.  Finit watches
 *all* files in `/var/run`, for each file named `*.pid`, or `*/pid`,
 Finit opens it and find the matching `NAME:ID` using the PID.
-The condition can be prefixed with `!` and/or `~`:
+`conditions` lists what must be asserted before starting `ospfd`.  In
 this example Finit waits for another service, `zebra`, to have created
 its PID file in `/var/run/quagga/zebra.pid`.  Finit watches *all* files
 in `/var/run`, for each file named `*.pid`, or `*/pid`, Finit opens it
 and finds the matching `NAME:ID` using the PID.
- - `<!pid/zebra>` -- `ospfd` does not support `SIGHUP` (noreload)
+A condition may be prefixed with `~` to propagate a reload of the
- - `<~pid/zebra>` -- propagate reload from `zebra` to `ospfd`
+upstream service to this one, rather than merely pausing and resuming
- - `<!~pid/zebra>` -- both: noreload and propagate reload
+it:
-For details, see the [Finit Conditions](../conditions.md) document.
+    conditions = { "~pid/zebra" }
 If `ospfd` cannot be reloaded with `SIGHUP` at all, that is a property
 of `ospfd` and not of the condition, so it is said directly:
    reload-signal = "none"
 The legacy format spells that second one as a `!` leading the condition
 list, which is not accepted here.  For details, see the
 [Finit Conditions](../conditions.md) document.
 Some services do not maintain a PID file and rather than patching each
-application Finit provides a workaround.  A `pid` keyword can be set
+application Finit provides a workaround.  With `pidfile-create` Finit
-to have Finit automatically create (when starting) and later remove
+creates the file when starting and removes it when stopping.  The path
-(when stopping) the PID file.  The file is created in the `/var/run`
+comes from `pidfile`, which takes three forms:
 directory using the `basename(1)` of the service.  The default can be
 modified with an optional `pid:`-argument:
-    pid[:[/path/to/]filename[.pid]]
+    pidfile = true              # /var/run/<command basename>.pid
    pidfile = "bar"             # a bare name, /var/run/bar.pid
    pidfile = "/run/bar.pid"    # an explicit path
-For example, by adding `pid:/run/bar.pid` to the service `/sbin/bar`,
+Such a file is also used by the Finit condition subsystem, so another
-that PID file will, not only be created and removed automatically, but
+service, run or task can depend on `pid/bar`.  Here foo is not started
-also be used by the Finit condition subsystem.  So a service/run/task
+until bar has:
 can depend on `<pid/bar>`, like this foo will not be started until bar
 has started:
-    service pid:/run/bar.pid bar -- Bar Service
+    service bar {
-    service <pid/bar> foo -- Foo Service
+        description    = "Bar Service"
        pidfile        = "/run/bar.pid"
        pidfile-create = true
        command        = "bar"
    }
    service foo {
        description = "Foo Service"
        conditions  = { "pid/bar" }
        command     = "foo"
    }
 Needless to say, it is better if `bar` creates its own PID file when it
 has completed starting up and is ready for service.
 As an alternative "readiness" notification, Finit supports both systemd
-and s6 style notification.  This can be enabled by using the `notify`
+and s6 style notification.  This is enabled with the `notify` key:
 option:
-  * `notify:systemd` -- tells Finit the service uses the `sd_notify()`
+  * `notify = "systemd"` -- tells Finit the service uses the `sd_notify()`
    API to signal PID 1 when it has completed its startup and is ready
    to service events.  The [sd_notify()][] API expects `NOTIFY_SOCKET`
    to be set to the socket where the application can send `"READY=1\n"`
    when it is starting up or has processed a `SIGHUP`.
-  * `notify:s6` -- puts Finit in s6 compatibility mode.  Compared to the
+  * `notify = "s6"` -- puts Finit in s6 compatibility mode.  Compared to the
    systemd notification, [s6 expect][] compliant daemons to send `"\n"`
    and then close their socket.  Finit takes care of "hard-wiring" the
    READY state as long as the application is running, events across any
@@ -93,7 +126,11 @@ option:
    (must be >3) on then command line, Finit provides the following
    syntax (`%n` is replaced by Finit with then descriptor number):
-        service [S12345789] notify:s6 mdevd -O 4 -D %n
+        service mdevd {
            runlevel = "S12345789"
            notify   = "s6"
            command  = "mdevd -O 4 -D %n"
        }
 [sd_notify()]: https://www.freedesktop.org/software/systemd/man/sd_notify.html
 [s6 expect]:   https://skarnet.org/software/s6/notifywhenup.html
@@ -107,7 +144,13 @@ then service's ready condition which other services can depend on:
 This can be used to synchronize the start of another run/task/service:
-    task [S] <service/mdevd/ready> @root:root mdevd-coldplug
+    task mdevd-coldplug {
        runlevel   = "S"
        conditions = { "service/mdevd/ready" }
        user       = "root"
        group      = "root"
        command    = "mdevd-coldplug"
    }
 Finit waits for `mdevd` to notify it, before starting `mdevd-coldplug`.
 Notice how both start in runlevel S, and the coldplug task only runs in
@@ -123,20 +166,29 @@ Non-privileged Services
 -----------------------
 Every `run`, `task`, or `service` can also list the privileges the
-`/path/to/cmd` should be executed with.  Prefix the command with
+command should be executed with, using `user`, `group` and
-`@USR[:GRP[,SUPP,...]]`, where group and supplementary groups are
+`extra-groups`, all optional:
 optional, like this:
-    run [2345] @joe:users logger "Hello world"
+    run hello {
        runlevel = "2345"
        user     = "joe"
        group    = "users"
        command  = "logger \"Hello world\""
    }
 Finit reads the user's supplementary group membership from `/etc/group`
 automatically.  Any groups the user belongs to will be inherited by
 the service.
-To specify additional supplementary groups beyond those in `/etc/group`,
+To specify additional supplementary groups beyond those in
-append them after the primary group, separated by commas:
+`/etc/group`, list them in `extra-groups`:
-    service @caddy:caddy,ssl-cert /usr/bin/caddy run
+    service caddy {
        user         = "caddy"
        group        = "caddy"
        extra-groups = { "ssl-cert" }
        command      = "/usr/bin/caddy run"
    }
 This runs the `caddy` service as user `caddy`, with primary group
 `caddy`, inheriting any groups `caddy` is a member of in `/etc/group`,
@@ -144,81 +196,161 @@ plus the additional `ssl-cert` group.  This is useful when a service
 needs access to resources owned by groups not listed in `/etc/group`.
 For multiple instances of the same command, e.g. a DHCP client or
-multiple web servers, add `:ID` somewhere between the `run`, `task`,
+multiple web servers, add `:ID` to the block title, like this:
 `service` keyword and the command, like this:
-    service :80  [2345] httpd -f -h /http -p 80   -- Web server
+    service httpd:80 {
-    service :8080[2345] httpd -f -h /http -p 8080 -- Old web server
+        description = "Web server"
        runlevel    = "2345"
        command     = "httpd -f -h /http -p 80"
    }
-Without the `:ID` to the service the latter will overwrite the former
+    service httpd:8080 {
-and only the old web server would be started and supervised.
+        description = "Old web server"
        runlevel    = "2345"
        command     = "httpd -f -h /http -p 8080"
    }
 Without the `:ID` the latter will overwrite the former and only the old
 web server would be started and supervised.
 > [!NOTE]
 > The line-based format also accepts a bare ID, `service :80 ...`,
 > deriving the name from the command.  There is no block equivalent:
 > the title carries both name and ID.
 Conditional Loading
 -------------------
-Finit support conditional loading of stanzas.  The following example is
+Finit supports conditional loading of blocks.  The following example is
-take from the `system/hotplug.conf` file in the Finit distribution.
+taken from the `system/10-hotplug.conf` file in the Finit distribution.
 Here we only show a simplified subset.
-Starting with the `nowarn` option.
+Starting with the udev daemon, which goes by two names depending on
 how it was built.  Both are candidates for the same service:
-    service nowarn name:udevd pid:udevd /lib/systemd/systemd-udevd
+    service udevd {
-    service nowarn name:udevd pid:udevd udevd
+        pidfile = "udevd"
        command = { "/lib/systemd/systemd-udevd", "-udevd" }
    }
-When loading the .conf file Finit looks for `/lib/systemd/systemd-udevd`
+When loading the .conf file Finit looks for
-if that is not found Finit automatically logs a warning.  The `nowarn`
+`/lib/systemd/systemd-udevd`, and if that is not there it moves on to
-option disables this warning so that the second line can be evaluated,
+`udevd`.  A candidate that is not installed is expected, so no warning
-which also provides a service named `udevd`.
+is logged for the ones that are skipped.  The leading `-` on the last
 one says it is also fine if none of them are found, in which case the
 block is dropped quietly and no service named `udevd` exists.
-    run nowarn if:udevd <pid/udevd> :1 udevadm settle -t 0
+> [!NOTE]
 > This needs to be one block.  The title is the service identity, so
 > two blocks titled `udevd` in the same file are two declarations of
 > one service, which Finit rejects.  See [Duplicate
 > titles](service-opts.md#duplicate-titles).
-This line is only loaded if we know of a service named `udevd`.  Again,
+    run udevadm:1 {
        runlevel   = "S"
        if         = "udevd"
        conditions = { "pid/udevd" }
        command    = "-udevadm settle -t 0"
    }
 This block is only loaded if we know of a service named `udevd`.  Again,
 we do not warn if `udevadm` is not found, execution will also stop here
 until the PID condition is asserted, i.e., Finit detecting udevd has
 started.
-    run nowarn conflict:udevd [S] mdev -s -- Populating device tree
+    run mdev {
        description = "Populating device tree"
        runlevel    = "S"
        conflicts   = { "udevd" }
        command     = "-mdev -s"
    }
 If `udevd` is not available, we try to run `mdev`, but if that is not
 found, again we do not warn.
-Conditional loading statements can also be negated, so the previous stanza
+Conditional loading can also be negated, so the previous block can be
-can also be written as:
+written as:
-    run nowarn if:!udevd [S] mdev -s -- Populating device tree
+    run mdev {
        description = "Populating device tree"
        runlevel    = "S"
        if          = "!udevd"
        command     = "-mdev -s"
    }
-The reason for using `conflict` in this example is that a conflict can be
+The reason for using `conflicts` in this example is that a conflict can
-resolved.  Stanzas marked with `conflict:foo` are rechecked at runtime.
+be resolved.  Blocks naming a conflict are rechecked at runtime.
 Conditional Execution
 ---------------------
-Similar to conditional loading of stanzas there is conditional runtime
+Similar to conditional loading of blocks there is conditional runtime
 execution.  This can be confusing at first, since Finit already has a
 condition subsystem, but this is more akin to the qualification to a
-runlevel.  E.g., a `task [123]` is qualified to run only in runlevel 1,
+runlevel.  E.g., a task with `runlevel = "123"` is qualified to run
-2, and 3.  It is not considered for other runlevels.
+only in runlevel 1, 2, and 3.  It is not considered for other
 runlevels.
 Conditional execution qualify a run/task/service based on a condition.
 Consider this (simplified) example from the Infix operating system:
-    run [S]                       name:startup <pid/sysrepo> confd -b --load startup-config
+    run startup {
-    run [S] if:<usr/fail-startup> name:failure <pid/sysrepo> confd    --load failure-config
+        runlevel   = "S"
        conditions = { "pid/sysrepo" }
        command    = "confd -b --load startup-config"
    }
-The two run statements reside in the same .conf file so Finit runs them
+    run failure {
-in true sequence.  If loading the file `startup-config` fails confd sets
+        runlevel   = "S"
-the condition `usr/fail-startup`, thus allowing the next run statement
+        if         = "usr/fail-startup"
-to load `failure-config`.
+        conditions = { "pid/sysrepo" }
        command    = "confd --load failure-config"
    }
-Notice the critical difference between the `<pid/sysrepo>` condition and
+The two run blocks reside in the same .conf file so Finit runs them in
-`if:<usr/fail-startup>`.  The former is a condition for starting and the
+true sequence.  If loading the file `startup-config` fails confd sets
-latter is a condition to check if a run/task/service is qualified to
+the condition `usr/fail-startup`, thus allowing the next one to load
-even be considered.
+`failure-config`.
-Conditional execution statements can also be negated, so provided the
+Notice the critical difference between the `conditions` list and `if`.
-file loaded did the opposite, i.e., set a condition on success, the
+The former is a condition for starting; the latter is a condition to
-previous stanza can also be written as:
+check whether a run/task/service is qualified to even be considered.
 `if` has a negation of its own, `!`, which is unrelated to anything in
 the `conditions` list.
-    run [S] if:<!usr/startup-ok> name:failure <pid/sysrepo> confd ...
+What `if` compares against depends on the value.  A namespace
 separator makes it a condition, anything else is a service name:
 | `if` | Asks |
 |---|---|
 | `"udevd"` | is a service by this name known? |
 | `"usr/foo"` | was this condition set? |
 Both are questions about whether the block belongs in the running
 configuration at all, usually answered from what bootstrap established.
 A statement is all of one kind or the other, so the block is rejected
 if you mix them.
 > [!NOTE]
 > `if` qualifies, it does not track.  A condition asserted or cleared
 > later does not start or stop the service by itself -- that is what
 > the `conditions` list is for.
 Conditional execution can also be negated, so provided the file loaded
 did the opposite, i.e., set a condition on success, the previous block
 can be written as:
    run failure {
        runlevel   = "S"
        if         = "!usr/startup-ok"
        conditions = { "pid/sysrepo" }
        command    = "confd ..."
    }
 Variants of one service are often qualified this way, one per platform,
 and they usually have to supply the same barrier to whatever waits for
 them.  Each variant needs its own title, since a title is an identity,
 and the shared barrier is named with `provides`.  See [Provided
 Conditions](service-opts.md#provided-conditions).
@@ -9,42 +9,45 @@ from a serialized boot process.
 SysV Init Scripts
 -----------------
-**Syntax:** `sysv [LVLS] <COND> /path/to/init-script -- Optional description`
+**Syntax:** `sysv NAME { command = "/path/to/init-script" }`
-> `<COND>` is described in the [Services](services.md) section.
+> [!NOTE]
 > Conditions, runlevels, and the other settings a `sysv` block takes
 > are described in [Service Options](service-opts.md).
-Similar to `task` is the `sysv` stanza, which can be used to call SysV
+A `sysv` block is a supervised daemon, like `service`, but started and
-style scripts.  The primary intention for this command is to be able to
+stopped through a SysV style init script instead of a command line.  The
-reuse much of existing setup and init scripts in Linux distributions.
+intention is to reuse existing setup and init scripts from Linux
 distributions.
 When entering an allowed runlevel, Finit calls `init-script start`, when
 entering a disallowed runlevel, Finit calls `init-script stop`, and if
-the Finit .conf, where `sysv` stanza is declared, is modified, Finit
+the Finit .conf, where the `sysv` block is declared, is modified, Finit
 calls `init-script restart` on `initctl reload`.  Similar to how
-`service` stanzas work.
+`service` blocks work.
 Forking services started with `sysv` scripts can be monitored by Finit
-by declaring the PID file to look for: `pid:!/path/to/pidfile.pid`.
+by declaring the PID file to look for: `pidfile = "/path/to/file.pid"`.
-Notice the leading `!`, it signifies Finit should not try to create the
+Finit does not create that file, it watches it for the resulting
-file, but rather watch that file for the resulting forked-off PID.  This
+forked-off PID.  That is the default; `pidfile-create = true` asks Finit
-syntax also works for forking daemons that do not have a command line
+to write it instead.  The same applies to forking daemons with no way to
-option to run it in the foreground, more on this below in `service`.
+run in the foreground, see [Services](services.md).
 > [!TIP]
 > See also [SysV Init Compatibility](#sysv-init-compatibility).
-`runparts DIRECTORY`
+Run-parts
--------------------
+---------
 For a directory with traditional start/stop scripts that should run, in
-order, at bootstrap, Finit provides the `runparts` directive.  It runs
+order, at bootstrap, Finit provides the `runparts` setting.  It runs
 in runlevel S, at the very end of it (before calling `/etc/rc.local`)
 making it perfect for most scenarios.
 For syntax details, see the [Run-parts Scripts](runparts.md) section.
 Here is an example take from a Debian installation:
-    runparts /etc/rc2.d
+    runparts = "/etc/rc2.d"
 Files in these directories are usually named `SNNfoo` and `KNNfoo`,
 which Finit knows about and automatically appends the correct argument:
@@ -64,7 +67,12 @@ Start/Stop Scripts
 For syntax details, see [SysV Init Scripts](#sysv-init-scripts), above.
 Here follows an example taken from a Debian installation:
-    sysv [2345] <pid/syslogd> /etc/init.d/openbsd-inetd -- OpenBSD inet daemon
+    sysv inetd {
        description = "OpenBSD inet daemon"
        runlevel    = "2345"
        conditions  = { "pid/syslogd" }
        command     = "/etc/init.d/openbsd-inetd"
    }
 The init script header could be parsed to extract `Default-Start:` and
 other parameters for the `sysv` command to Finit.  There is currently no
@@ -83,6 +91,7 @@ it exists, and is executable.  It is called very late in the boot process
 when the system has left runlevel S, stopped all old and started all new
 services in the target runlevel (default 2).
 > [!NOTE]
 > In Finit releases before v4.5 this script blocked Finit execution and
 > made it as good as impossible to call `initctl` during that time.
@@ -1,9 +1,10 @@
 run (sequence)
 --------------
-**Syntax:** `run [LVLS] <COND> /path/to/cmd ARGS -- Optional description`
+**Syntax:** `run NAME { command = "/path/to/cmd ARGS" }`
-> `<COND>` is described in the [Services](services.md) section.
+> Conditions, runlevels, and the other settings a `run` block takes are
 > described in [Service Options](service-opts.md).
 One-shot command to run in sequence when entering a runlevel, with
 optional arguments and description.  `run` commands are guaranteed to be
@@ -31,36 +32,45 @@ also the `--quiet` and `--batch` options.
 task (parallel)
 ---------------
-**Syntax:** `task [LVLS] <COND> /path/to/cmd ARGS -- Optional description`
+**Syntax:** `task NAME { command = "/path/to/cmd ARGS" }`
-> `<COND>` is described in the [Services](services.md) section.
+> A `task` block takes the same settings as `run`, see
 > [Service Options](service-opts.md).
 One-shot like 'run', but starts in parallel with the next command.
 Both `run` and `task` commands are run in a shell, so basic pipes and
 redirects can be used:
-    task [s] echo "foo" | cat >/tmp/bar
+    task bar {
        runlevel = "S"
        command  = "echo \"foo\" | cat >/tmp/bar"
    }
 Please note, `;`, `&&`, `||`, and similar are *not supported*.  Any
 non-trivial constructs are better placed in a separate shell script.
-remain:yes
+remain-after-exit
----------
+-----------------
 By default, a `run` or `task` will re-run each time its runlevel is
-entered, and its `post:` script does not run on completion.
+entered, and its `exec-stop-post` script does not run on completion.
-With `remain:yes`, the task runs once and does not re-run on runlevel
+With `remain-after-exit`, the task runs once and does not re-run on
-re-entry:
+runlevel re-entry:
-    task [2345] remain:yes /usr/sbin/setup-firewall -- Firewall setup
+    task firewall {
        description       = "Firewall setup"
        runlevel          = "2345"
        remain-after-exit = true
        command           = "/usr/sbin/setup-firewall"
    }
 This has the following effects:
  * The task does not re-run on runlevel re-entry
-  * The `post:` script runs when:
+  * The `exec-stop-post` script runs when:
    - The task is explicitly stopped (`initctl stop NAME`)
    - The task leaves its valid runlevels (e.g., runlevel change)
@@ -72,16 +82,20 @@ This is useful for tasks that set up persistent state where:
 **Example:** Setting up firewall rules with cleanup on shutdown:
 ```
-task [2345] remain:yes \
+task firewall {
-     post:/usr/sbin/teardown-firewall \
+    description       = "Firewall setup"
-     /usr/sbin/setup-firewall -- Firewall setup
+    runlevel          = "2345"
    remain-after-exit = true
    exec-stop-post    = "/usr/sbin/teardown-firewall"
    command           = "/usr/sbin/setup-firewall"
 }
 ```
-The firewall rules are created once.  The `post:` script runs when
+The firewall rules are created once.  The `exec-stop-post` script runs when
 entering runlevel 0 (halt) or 6 (reboot), or on explicit stop.
 > [!NOTE]
-> The `remain:yes` option is not supported for bootstrap-only tasks
+> The `remain-after-exit` setting is not supported for bootstrap-only
-> (tasks with only runlevel S).  Bootstrap tasks are deleted immediately
+> tasks (tasks with only runlevel S).  Bootstrap tasks are deleted
-> after completion, and their `post:` scripts never run.  A warning is
+> immediately after completion, and their `exec-stop-post` scripts never
-> logged if `remain:yes` is used on such tasks.
+> run.  A warning is logged if `remain-after-exit` is used on such tasks.
@@ -5,16 +5,20 @@ Finit comes with rudimentary support for templating, similar to that of
 systemd.  Best illustrated with an example:
    $ initctl show avahi-autoipd@
-    service :%i avahi-autoipd --syslog %i -- ZeroConf for %i
+    service avahi-autoipd:%i {
        description = "ZeroConf for %i"
        command     = "avahi-autoipd --syslog %i"
    }
 To enable ZeroConf for, e.g., `eth0`, use
    $ initctl enable avahi-autoipd@eth0.conf
 The enabled symlink will be set up to `avahi-autoipd@.conf` and every
-instance of `%i` will in the instantiated directive be replaced with
+instance of `%i` will be replaced with `eth0` before the file is
-`eth0`.  Inspect the resulting instantiated template with `initctl show
+parsed, so it works in the block title, in any value, and in the
-avahi-autoipd:eth0` and check the status of a running instance with:
+command line alike.  Inspect the result with `initctl show
 avahi-autoipd:eth0`, and check a running instance with:
 ```
 $ initctl status avahi-autoipd:eth0
@@ -1,67 +1,99 @@
 TTYs and Consoles
 =================
-**Syntax:** `tty [LVLS] <COND> DEV [BAUD] [noclear] [nowait] [nologin] [TERM]`  
+**Syntax:** `tty NAME { device = DEV }` -- built-in getty  
-  `tty [LVLS] <COND> CMD <ARGS> [noclear] [nowait]`  
+  `tty NAME { command = "CMD ARGS" }` -- external getty  
-  `tty [LVLS] <COND> [notty] [rescue]`
+  `tty NAME { notty = true }`, or `{ rescue = true }` -- bare shell, no device
-The first variant of this option uses the built-in getty on the given
+The block title NAME is what `initctl` shows.  The three variants differ
-TTY device DEV, in the given runlevels.  DEV may be the special keyword
+in what they open: `device` runs the built-in getty on that TTY, and DEV
-`@console`, which is expanded from `/sys/class/tty/console/active`,
+may be the special keyword `@console`, expanded from
-useful on embedded systems.
+`/sys/class/tty/console/active`, useful on embedded systems.  `command`
 hands the TTY to an external getty.  `notty` opens nothing at all.
-The default baud rate is 0, i.e., keep kernel default.
+`command` may name several candidates, `{ "agetty ...", "getty ..." }`,
 and Finit runs the first one it finds.  See [Command
 Candidates](service-opts.md#command-candidates).
-> The `tty` stanza inherits runlevel, condition (and other feature)
+Settings common to all three:
-> parsing from the `service` stanza.  So TTYs can run in one or many
+
 | Setting | Alias | Description |
 |---|---|---|
 | `runlevel` | | Runlevels to run in, e.g. `"12345"` |
 | `conditions` | `cond` | Conditions to wait for |
 | `noclear` | | Do not clear the TTY after each session |
 | `nowait` | | Do not wait for Enter before the login prompt |
 | `nologin` | | Skip login, give a shell straight away |
 | `passenv` | | Pass the environment on to `login`, built-in getty only |
 The `device` variant takes two more:
 | Setting | Description |
 |---|---|
 | `baud` | Baud rate, default 0, i.e., keep kernel default |
 | `term` | `$TERM` value, e.g. `"vt220"` |
 > A `tty` block inherits runlevel, condition (and other feature)
 > parsing from the `service` block.  So TTYs can run in one or many
 > runlevels and depend on any condition supported by Finit.  This is
 > useful e.g. to depend on `<pid/elogind>` before starting a TTY.
 **Example:**
-    tty [12345] /dev/ttyAMA0 115200 noclear vt220
+    tty ttyAMA0 {
        runlevel = "12345"
        device   = "/dev/ttyAMA0"
        baud     = 115200
        term     = "vt220"
        noclear  = true
    }
 The second `tty` syntax variant is for using an external getty, like
 agetty or the BusyBox getty.
 The third variant is for board bringup and the `rescue` boot mode.  No
-device node is required in this variant, the same output that the kernel
+device node is required, the same output the kernel uses is reused for
-uses is reused for stdio.  If the `rescue` option is omitted, a shell is
+stdio.  With `notty` a shell is started (`nologin`, `noclear`, and
-started (`nologin`, `noclear`, and `nowait` are implied), if the rescue
+`nowait` are implied); with `rescue` the bundled
-option is set the bundled `/libexec/finit/sulogin` is started to present
+`/libexec/finit/sulogin` presents a bare-bones root login prompt.  If
-a bare-bones root login prompt.  If the root (uid:0, gid:0) user does
+the root (uid:0, gid:0) user does not have a password set, no rescue is
-not have a password set, no rescue is possible.  For more information,
+possible.  For more information, see the [Rescue Mode](rescue.md)
-see the [Rescue Mode](rescue.md) section.
+section.
 By default, the first two syntax variants *clear* the TTY and *wait* for
 the user to press enter before starting getty.
 **Example:**
-    tty [12345] /sbin/getty  -L 115200 /dev/ttyAMA0 vt100
+    tty getty {
-    tty [12345] /sbin/agetty -L ttyAMA0 115200 vt100 nowait
+        runlevel = "12345"
        command  = "/sbin/getty -L 115200 /dev/ttyAMA0 vt100"
    }
-The `noclear` option disables clearing the TTY after each session.
+    tty agetty {
        runlevel = "12345"
        command  = "/sbin/agetty -L ttyAMA0 115200 vt100"
        nowait   = true
    }
 The `noclear` setting disables clearing the TTY after each session.
 Clearing the TTY when a user logs out is usually preferable.
-The `nowait` option disables the `press Enter to activate console`
+The `nowait` setting disables the `press Enter to activate console`
 message before actually starting the getty program.  On small and
 embedded systems running multiple unused getty wastes both memory
 and CPU cycles, so `wait` is the preferred default.
-The `nologin` option disables getty and `/bin/login`, and gives the
+The `nologin` setting disables getty and `/bin/login`, and gives the
-user a root (login) shell on the given TTY `<DEV>` immediately.
+user a root (login) shell on the given TTY immediately.
 Needless to say, this is a rather insecure option, but can be very
 useful for developer builds, during board bringup, or similar.
 Notice the ordering, the `TERM` option to the built-in getty must be
 the last argument.
 Embedded systems may want to enable automatic `DEV` by supplying the
-special `@console` device.  This works regardless weather the system
+special `@console` device.  This works regardless whether the system
 uses `ttyS0`, `ttyAMA0`, `ttyMXC0`, or anything else.  Finit figures
-it out by querying sysfs: `/sys/class/tty/console/active`.  The speed
+it out by querying sysfs: `/sys/class/tty/console/active`.  Leave
-can be omitted to keep the kernel default.
+`baud` out to keep the kernel default.
 > Most systems get by fine by just using `console`, which will evaluate
 > to `/dev/console`.  If you have to use `@console` to get any output,
@@ -69,18 +101,67 @@ can be omitted to keep the kernel default.
 **Example:**
-    tty [12345] @console noclear vt220
+    tty console {
        runlevel = "12345"
        device   = "@console"
        term     = "vt220"
        noclear  = true
    }
 On really bare bones systems, or for board bringup, Finit can give you a
 shell prompt as soon as bootstrap is done, without opening any device
 node:
-    tty [12345789] notty
+    tty board {
        runlevel = "12345789"
        notty    = true
    }
 This should of course not be enabled on production systems.  Because it
 may give a user root access without having to log in.  However, for
 board bringup and system debugging it can come in handy.
-One can also use the `service` stanza to start a stand-alone shell:
+One can also use a `service` block to start a stand-alone shell:
-    service [12345] /bin/sh -l
+    service shell {
        runlevel = "12345"
        command  = "/bin/sh -l"
    }
 Controlling TTY for Services
 ----------------------------
 The `tty` setting gives a `run`, `task`, or `service` a controlling
 terminal on the given device.  The device is opened, set as the
 controlling terminal for the session (after `setsid()`), and connected to
 the process's stdin, stdout, and stderr.  A default `TERM` environment
 variable is set based on the device type: `vt102` for serial lines and
 `linux` for virtual terminals.
 The value may be a device node like `/dev/ttyS0`, or the special
 keyword `@console` (see above).  Note that `@console` expands only to
 the first console, not all.
 When `tty` is combined with a `log` block, stdout and stderr are
 redirected to the log sink instead of the TTY, but stdin remains
 connected to the TTY device.
 > The `tty` setting is for `run`, `task`, and `service` blocks only.
 > A `tty` block (for getty/login) is a different thing entirely, see
 > above.
 **Example:**
    service foo {
        description = "Foo on serial console"
        runlevel    = "2345"
        tty         = "/dev/ttyS0"
        command     = "/usr/sbin/foo"
    }
    task setup {
        description = "Board bringup on console"
        runlevel    = "S"
        tty         = "@console"
        command     = "my-setup-script"
    }
@@ -0,0 +1,375 @@
 D-Bus Integration
 =================
 Finit ships with a built-in, brokerless [D-Bus][] implementation, **libink**
 (`-link`), that exposes the running init system as a peer on its own private
 bus, and optionally on the system bus when `dbus-daemon` is available.
 Everything `initctl` does is also reachable from any generic D-Bus tooling —
 `dbus-send`, `dbus-monitor`, `gdbus`, language bindings, dashboards,
 monitoring agents, etc.
 > [!NOTE]
 > D-Bus support is enabled by default, opt out at build time with
 > `--disable-dbus`, see [Building](build.md) for details.  When disabled,
 > `initctl` keeps using the legacy `INIT_SOCKET` transport and Finit
 > exposes no bus.
 Bus address
 -----------
 | Bus                    | Address                                     |
 |------------------------|---------------------------------------------|
 | Local (always)         | `unix:path=/run/finit/bus`                  |
 | System (opportunistic) | `unix:path=/var/run/dbus/system_bus_socket` |
 The bundled device manager serves its own `org.finit.Device1` the same
 way on `unix:path=/run/keventd/bus`, see [keventd](keventd.md); one
 socket per daemon, no forwarding between them.
 The **local** bus is brokerless: clients connect straight to Finit over a
 Unix-domain socket using the standard D-Bus SASL EXTERNAL handshake.  No
 `dbus-daemon` is required, which makes it suitable for embedded systems that
 don't ship one.
 The socket is `0660`, owned by `root` and the group given to
 `--with-group` at build time, the same gate as `/run/finit/socket` that
 `initctl` falls back on.  The bus reaches every operation `initctl`
 does, so restricting one and not the other would leave the door open.
 Members of that group may use it, see [Authorization](#authorization).
 Finit accepts at most 64 concurrent local-bus peers; further
 connections are refused until one disconnects.  Match rules given to
 `AddMatch` support the `type`, `interface`, `member`, and `path` keys;
 `arg0` and its variants are not implemented.
 For the system bus a standard busconfig policy ships in
 `dbus-1/org.finit.conf`, installed to `$datadir/dbus-1/system.d`: only
 root may own `org.finit`, unprivileged callers reach introspection,
 properties, and the read-only methods.
 Finit also enforces per-method authorization itself, so a permissive
 policy installed by mistake does not open state-changing methods.
 The **system** bus is best-effort: Finit probes for a running `dbus-daemon`
 and, when reachable, claims the well-known name `org.finit` so that standard
 tooling sees Finit just like any other system service:
 ```sh
 dbus-send --system --print-reply --dest=org.finit /org/finit/manager \
          org.finit.Manager1.ListServices
 dbus-monitor --system "sender='org.finit'"
 ```
 If no system bus is present (the common case on embedded targets), this step
 is silently skipped.
 Object tree
 -----------
 ```
 /
 ├── org/
 │   └── finit/
 │       ├── manager                          Manager1
 │       ├── cond                             Cond1
 │       └── service/
 │           ├── keventd                      Service1 (one per service)
 │           ├── sshd
 │           └── …
 └── org/freedesktop/DBus                     Standard well-known interfaces
 ```
 Every node implements the usual stock interfaces:
 | Interface                             | Purpose                                   |
 |---------------------------------------|-------------------------------------------|
 | `org.freedesktop.DBus`                | `Hello`, `AddMatch`, `RemoveMatch` — on `/org/freedesktop/DBus` only |
 | `org.freedesktop.DBus.Peer`           | `Ping`, `GetMachineId`                    |
 | `org.freedesktop.DBus.Introspectable` | `Introspect()` — XML description          |
 | `org.freedesktop.DBus.Properties`     | `Get`, `GetAll`; nothing is writable      |
 Note: `Hello`, `AddMatch`, and `RemoveMatch` are answered on the canonical
 `/org/freedesktop/DBus` object only, as per the D-Bus specification.
 `org.finit.Manager1`
 --------------------
 Lives at **`/org/finit/manager`**.  Owns the global init operations
 and the service registry.
 ### Methods
 | Method                       | In sig | Out sig | Priv. | Notes                                                     |
 |------------------------------|--------|---------|-------|-----------------------------------------------------------|
 | `ListServices`               | —      | `as`    | no    | Returns identities (`name`, `name:id`) of loaded services |
 | `GetService`                 | `s`    | `o`     | no    | Resolves an identity to its `Service1` object path        |
 | `Start`                      | `s`    | —       | yes   | Start the service(s) matching the identity                |
 | `Stop`                       | `s`    | —       | yes   | Stop the service(s) matching the identity                 |
 | `Restart`                    | `s`    | —       | yes   | Restart (stop + start) the service(s)                     |
 | `Reload`                     | —      | —       | yes   | Re-read all `*.conf` and apply changes                    |
 | `SetRunlevel`                | `u`    | —       | yes   | Transition to runlevel `u` (0–9)                          |
 | `SetDebug`                   | —      | —       | yes   | Toggle Finit's runtime debug flag                         |
 | `Signal`                     | `su`   | —       | yes   | Send signal `u` (1–31) to services matching identity `s`  |
 | `Suspend`                    | —      | —       | yes   | `sync()` + suspend-to-RAM                                 |
 | `Reboot`, `Halt`, `Poweroff` | `u`    | —       | yes   | Trigger the corresponding shutdown sequence; the argument arms the emergency fallback timer (seconds, 0 = none) |
 Edge cases follow the legacy `initctl` protocol: `Suspend` and the
 reboot family reply `WrongRunlevel` during bootstrap and shutdown,
 `SetRunlevel` is a warning + no-op in runlevel 0/6 and records the
 level for the end of bootstrap in runlevel S, and `Signal` fails for
 stopped services.  One deliberate divergence: a `SetRunlevel` argument
 outside 0–9 returns `InvalidArgs`, where the legacy protocol
 acknowledges silently.
 ### Properties
 All read-only strings; observable via `Properties.Get` and
 `Properties.GetAll`.
 | Property       | Type | Returns                                                |
 |----------------|------|--------------------------------------------------------|
 | `Runlevel`     | `s`  | Current runlevel as a digit (`"2"`, `"3"`, …) or `"S"` |
 | `PrevRunlevel` | `s`  | Previous runlevel, same encoding, `"N"` when none      |
 | `Version`      | `s`  | Finit's version string (`PACKAGE_VERSION`)             |
 ### Signals
 | Signal                | Body                                   | Fires when             |
 |-----------------------|----------------------------------------|------------------------|
 | `ServiceStateChanged` | `sss` — identity, old state, new state | Service transitions    |
 | `RunlevelChanged`     | `ss`  — old level, new level           | System runlevel change |
 | `ConfigReloaded`      | —                                      | `initctl reload` completed; providers of generation-file conditions re-assert |
 State names emitted by `ServiceStateChanged` are stable wire strings:
 `halted`, `done`, `dead`, `cleanup`, `teardown`, `stopping`, `setup`,
 `paused`, `waiting`, `starting`, `running`.  `RunlevelChanged` levels
 use the same encoding as the `Runlevel` property: digits, `"S"`, `"N"`.
 `org.finit.Service1` (per-service objects)
 ------------------------------------------
 Lives at **`/org/finit/service/<encoded>`**, one object per loaded service.
 `<encoded>` is the service identity (name, or `name:id` for templated
 services) put through systemd-style `_HH` hex escaping — ASCII alphanumerics
 and `_` pass through, anything else becomes `_HH` where `HH` is the hex byte.
 Use `Manager1.GetService(identity)` to look up the exact path rather than
 constructing it by hand.
 | Method    | In sig | Out sig | Priv. | Notes                                                       |
 |-----------|--------|---------|-------|-------------------------------------------------------------|
 | `Start`   | —      | —       | yes   | Equivalent to `Manager1.Start(<identity>)` for this service |
 | `Stop`    | —      | —       | yes   | …                                                           |
 | `Restart` | —      | —       | yes   | …                                                           |
 | `Reload`  | —      | —       | yes   | Send the service's `reload-signal`, default `SIGHUP`; restart when set to `"none"` |
 ### Properties
 All read-only; observable via `Properties.Get` and `Properties.GetAll`.
 | Property        | Type | Returns                                                        |
 |-----------------|------|----------------------------------------------------------------|
 | `Identity`      | `s`  | Service identity, `name` or `name:id`                          |
 | `Name`          | `s`  | Program name (basename of the command)                         |
 | `State`         | `s`  | Current status, same vocabulary as `initctl status`            |
 | `Pid`           | `u`  | Current PID, 0 when not running                                |
 | `RestartCount`  | `u`  | Restarts since the last stable run                             |
 | `Runlevels`     | `u`  | Allowed runlevels as a bitmask, bit N = runlevel N, bit 10 = S |
 | `Description`   | `s`  | The service's `description` string                             |
 | `Command`       | `s`  | Full command line, arguments included                          |
 | `Conditions`    | `s`  | Declared conditions, raw `.conf` form                          |
 | `Type`          | `s`  | Unit type: `service`, `task`, `run`, `sysv`, `tty`, `free`     |
 | `Origin`        | `s`  | Source `.conf` file, empty for built-ins                       |
 | `Environment`   | `s`  | The service's `env` setting, raw                               |
 | `PidFile`       | `s`  | Declared PID file, raw (`!` prefix included)                   |
 | `User`          | `s`  | User the service runs as                                       |
 | `Group`         | `s`  | Group the service runs as                                      |
 | `Uptime`        | `u`  | Seconds since start, 0 when not running                        |
 | `ExitStatus`    | `u`  | Raw `waitpid(2)` status from the last exit                     |
 | `RestartsTotal` | `u`  | Restarts over the service's lifetime                           |
 | `RestartMax`    | `u`  | Restart limit before the service is blocked                    |
 | `Starts`        | `u`  | Times started, for `manual-start` units                        |
 | `ManualStart`   | `b`  | `manual-start` set in the `.conf`                              |
 | `Forking`       | `b`  | Daemon forks to background                                     |
 | `Started`       | `b`  | Run/task completed successfully                                |
 On every state transition the object also emits the standard
 `org.freedesktop.DBus.Properties.PropertiesChanged` signal: `State`
 in the changed dictionary, `Pid` and `RestartCount` invalidated (call
 `Get` for fresh values).
 The per-service surface lets generic tooling supply an object handle
 once and then invoke methods on it, instead of repeatedly passing the
 identity string.
 `org.finit.Cond1`
 -----------------
 Lives at **`/org/finit/cond`**.  Exposes Finit's
 [condition system](conditions.md) to bus clients.
 ### Methods
 | Method  | In sig | Out sig | Priv. | Notes                                                        |
 |---------|--------|---------|-------|--------------------------------------------------------------|
 | `Get`   | `s`    | `s`     | no    | Returns `"on"`, `"off"`, or `"flux"` for the named condition |
 | `Set`   | `s`    | —       | yes   | Assert a `usr/<name>` condition                              |
 | `Clear` | `s`    | —       | yes   | Deassert a `usr/<name>` condition                            |
 | `List`  | —      | `as`    | no    | Names of all known conditions                                |
 | `Dump`  | —      | `a(ss)` | no    | `(name, state)` pairs for everything `List` returns          |
 Note: non-`usr/*` paths are rejected with `InvalidArgs` -- system
 conditions belong to Finit's state machine.
 A service consuming such a condition:
    service alarm {
        description = "Foo alarm"
        runlevel    = "2345"
        conditions  = { "usr/data-ready" }
        command     = "alarm --arg foo"
    }
 asserted from any bus client with `Cond1.Set string:"data-ready"`, see
 the examples below.
 ### Signals
 | Signal             | Body                   | Fires when                            |
 |--------------------|------------------------|---------------------------------------|
 | `ConditionChanged` | `ss` — name, new state | A condition is asserted or deasserted |
 Authorization
 -------------
 Privileged methods accept `root`, and any caller belonging to the group given
 to `--with-group` at build time.  That is the same set the socket mode already
 admits, so the two gates agree instead of the socket letting the group in and
 every method turning it away.
 On the **local** bus the kernel settles this at `connect()`: `SO_PEERCRED`
 gives Finit the caller's uid and `SO_PEERGROUPS` its group set, both straight
 from the kernel.  Finit matches the group against `--with-group` itself, so
 the check never touches NSS -- `getpwuid`/`getgrouplist` can block on a slow
 LDAP or SSSD backend, and PID 1 must never block.  Because the group set is
 the caller's real credentials, privilege escalation through the bus is
 impossible.
 On the **system** bus one connection carries every caller, so `SO_PEERCRED`
 describes `dbus-daemon` rather than whoever asked.  Finit asks the bus driver
 `GetConnectionUnixUser` about the message sender and holds the call until the
 answer arrives -- nothing blocks, the reply comes back through the same event
 loop as everything else.  The broker does not report the caller's groups in
 that reply, so **privileged methods over the system bus are root-only**; group
 membership is honoured on the local bus only.  Lifting that is future work,
 see `libink/README.md`.
 Answers are cached per sender.  A bus never reuses a unique name while it
 runs, so an answer holds for as long as that bus does; Finit empties the cache
 when the broker goes away, since a new one numbers its clients from scratch.
 A caller Finit cannot identify is refused, so the failure mode is a denial
 rather than an escalation.
 When a privileged method is rejected the error name is exactly
 `org.freedesktop.DBus.Error.AccessDenied`, and the body carries a short reason
 string.
 `initctl` integration
 ---------------------
 `initctl` transparently routes through D-Bus when the bus socket is present,
 and falls back to the legacy `INIT_SOCKET` transport otherwise.  Concretely,
 the following subcommands use the bus first:
 | Subcommand                 | Method                                           |
 |----------------------------|--------------------------------------------------|
 | `initctl start`            | `Manager1.Start(svc)`                            |
 | `initctl stop`             | `Manager1.Stop(svc)`                             |
 | `initctl restart`          | `Manager1.Restart(svc)`                          |
 | `initctl reload`           | `Manager1.Reload()`                              |
 | `initctl reload S`         | `Service1.Reload()` (per-svc)                    |
 | `initctl reboot`           | `Manager1.Reboot(timeout)`                       |
 | `initctl halt`             | `Manager1.Halt(timeout)`                         |
 | `initctl poweroff`         | `Manager1.Poweroff(timeout)`                     |
 | `initctl suspend`          | `Manager1.Suspend()`                             |
 | `initctl debug`            | `Manager1.SetDebug()`                            |
 | `initctl signal` (or `kill`) | `Manager1.Signal(svc, signo)`                  |
 | `initctl runlevel`         | `Properties.Get(Manager1.Runlevel/PrevRunlevel)` |
 | `initctl cond set/get/clear` | `Cond1.{Set,Get,Clear}`, `clr` is an alias     |
 Two `initctl` subcommands are pure D-Bus features without legacy equivalents:
 * `initctl monitor` — subscribes to every signal on the local bus and prints
  one line per delivery (with timestamp, interface and member).  Same idea as
  `dbus-monitor`, but scoped to Finit and with no need to pass `--address`.
 * `initctl cond` emits the standard `Cond1.ConditionChanged` signal as a side
  effect, so subscribers observe user-driven state changes the same way they
  observe service-driven ones.
 Examples
 --------
 The examples below use `dbus-send` and `dbus-monitor`, which ship as part of
 the [dbus][] reference implementation; they're widely packaged and don't pull
 in any extra runtime.  Any tool that speaks D-Bus over an AF_UNIX socket works
 equally well — `gdbus`, Python's `jeepney`/`dasbus`, etc. — substitute their
 syntax for setting the bus address.  The wire protocol is the compatibility
 surface: Finit's own **libink** is an internal implementation detail, external
 clients should use any standard D-Bus library.
 When `org.finit` is registered on the system bus you can replace
 `--address=unix:path=/run/finit/bus` with `--system` in any example below.
 List the running services:
 ```sh
 dbus-send --address=unix:path=/run/finit/bus \
          --type=method_call --print-reply --dest=org.finit \
          /org/finit/manager \
          org.finit.Manager1.ListServices
 ```
 Read the current runlevel via the Properties interface:
 ```sh
 dbus-send --address=unix:path=/run/finit/bus \
          --type=method_call --print-reply --dest=org.finit \
          /org/finit/manager \
          org.freedesktop.DBus.Properties.Get \
          string:org.finit.Manager1 string:Runlevel
 ```
 Subscribe to every state change on the manager object:
 ```sh
 dbus-monitor --address=unix:path=/run/finit/bus \
             "type='signal',interface='org.finit.Manager1'"
 ```
 Or use `initctl monitor`, which does the same without any address
 plumbing.
 Restart a service by its object path:
 ```sh
 dbus-send --address=unix:path=/run/finit/bus \
          --type=method_call --dest=org.finit \
          /org/finit/service/sshd \
          org.finit.Service1.Restart
 ```
 Trigger a `usr/`-condition assertion that wakes any dependent service:
 ```sh
 dbus-send --address=unix:path=/run/finit/bus \
          --type=method_call --dest=org.finit \
          /org/finit/cond \
          org.finit.Cond1.Set string:"data-ready"
 ```
 The `--dest=org.finit` argument is informational on the local
 brokerless bus — Finit accepts any destination because there's no
 broker to route by name — but `dbus-send` requires it syntactically.
 [dbus]:  https://gitlab.freedesktop.org/dbus/dbus
 [D-Bus]: https://dbus.freedesktop.org/doc/dbus-specification.html
@@ -10,117 +10,194 @@ See the [contrib/][contrib] directory on GitHub for examples, or take a
 peek at systems using Finit, like [Infix OS][infix] and [myLinux][].
 > [!TIP]
-> As of Finit v4.4, `.conf` lines can be broken up using the standard UNIX
+> A block spans as many lines as it needs, so no continuation character is
-> continuation character (`\`), trailing comments are also supported.  The
+> called for.  For the full syntax, see the [finit.conf(5)][] manual or the
-> latter means you must escape any hashes used in directives and descriptions
+> [Configuration](config/index.md) section.
 > (`\#`).  For more on this and examples, see the [finit.conf(5)][] manual or
 > the [Configuration](config/index.md) section.
 ```ApacheConf
 # Fallback if /etc/hostname is missing
-host default
+hostname = "default"
 # Runlevel to start after bootstrap, 'S', default: 2
-#runlevel 2
+#runlevel = 2
-# Support for setting global environment variables, using foo=bar syntax
+# Global environment variables, be careful though with variables like
-# be careful though with variables like PATH, SHELL, LOGNAME, etc.
+# PATH, SHELL, LOGNAME, etc.
-#PATH=/usr/bin:/bin:/usr/sbin:/sbin
+#environment {
 #    PATH = "/usr/bin:/bin:/usr/sbin:/sbin"
 #}
 # Max file size for each log file: 100 kiB, rotate max 4 copies:
 # log => log.1 => log.2.gz => log.3.gz => log.4.gz
-log size=100k count=4
+log {
    size  = 100k
    count = 4
 }
 # Services to be monitored and respawned as needed
-service [S12345] env:-/etc/conf.d/watchdog watchdog $WATCHDOG_OPTS $WATCHDOG_DEV -- System watchdog daemon
+service watchdog {
-service [S12345] env:-/etc/conf.d/syslog syslogd -n $SYSLOGD_OPTS          -- System log daemon
+    description = "System watchdog daemon"
-service [S12345] <pid/syslogd> env:-/etc/conf.d/klogd klogd -n $KLOGD_OPTS -- Kernel log daemon
+    runlevel    = "S12345"
-service   [2345] env:-/etc/conf.d/lldpd lldpd -d $LLDPD_OPTS               -- LLDP daemon (IEEE 802.1ab)
+    envfile     = "-/etc/conf.d/watchdog"
    command     = "watchdog $WATCHDOG_OPTS $WATCHDOG_DEV"
 }
 service syslogd {
    description = "System log daemon"
    runlevel    = "S12345"
    envfile     = "-/etc/conf.d/syslog"
    command     = "syslogd -n $SYSLOGD_OPTS"
 }
 service klogd {
    description = "Kernel log daemon"
    runlevel    = "S12345"
    conditions  = { "pid/syslogd" }
    envfile     = "-/etc/conf.d/klogd"
    command     = "klogd -n $KLOGD_OPTS"
 }
 service lldpd {
    description = "LLDP daemon (IEEE 802.1ab)"
    runlevel    = "2345"
    envfile     = "-/etc/conf.d/lldpd"
    command     = "lldpd -d $LLDPD_OPTS"
 }
 # The BusyBox ntpd does not use syslog when running in the foreground
 # So we use this trick to redirect stdout/stderr to a log file.  The
 # log file is rotated with the above settings.  The condition declares
-# a dependency on a system default route (gateway) to be set.  A single
+# a dependency on a system default route (gateway) to be set.  ntpd
-# <!> at the beginning means ntpd does not respect SIGHUP for restart.
+# does not respect SIGHUP, so Finit restarts it on reload instead.
-service [2345] log:/var/log/ntpd.log <!net/route/default> ntpd -n -l -I eth0 -- NTP daemon
+service ntpd {
    description   = "NTP daemon"
    runlevel      = "2345"
    conditions    = { "net/route/default" }
    reload-signal = "none"
    log { file = "/var/log/ntpd.log" }
    command       = "ntpd -n -l -I eth0"
 }
-# For multiple instances of the same service, add :ID somewhere between
+# For multiple instances of the same service, add :ID to the block title.
-# the service/run/task keyword and the command.
+service merecat:80 {
-service :80   [2345] merecat -n -p 80   /var/www -- Web server
+    description = "Web server"
-service :8080 [2345] merecat -n -p 8080 /var/www -- Old web server
+    runlevel    = "2345"
    command     = "merecat -n -p 80 /var/www"
 }
 service merecat:8080 {
    description = "Old web server"
    runlevel    = "2345"
    command     = "merecat -n -p 8080 /var/www"
 }
 # Alternative method instead of below runparts, can also use /etc/rc.local
-#sysv [S] /etc/init.d/keyboard-setup       -- Setting up preliminary keymap
+#sysv keyboard-setup {
-#sysv [S] /etc/init.d/acpid                -- Starting ACPI Daemon
+#    description = "Setting up preliminary keymap"
-#task [S] /etc/init.d/kbd                  -- Preparing console
+#    runlevel    = "S"
 #    command     = "/etc/init.d/keyboard-setup"
 #}
-# Hidden from boot progress, using empty `--` description
+# Hidden from boot progress, using an empty description
-#sysv [S] /etc/init.d/keyboard-setup       --
+#sysv acpid {
-#sysv [S] /etc/init.d/acpid                --
+#    description = ""
-#task [S] /etc/init.d/kbd                  --
+#    runlevel    = "S"
 #    command     = "/etc/init.d/acpid"
 #}
 # Run start scripts from this directory
-# runparts /etc/start.d
+#runparts = "/etc/start.d"
 # Virtual consoles run BusyBox getty, keep kernel default speed
-tty [12345] /sbin/getty -L 0 /dev/tty1  linux nowait noclear
+tty tty1 {
-tty [2345]  /sbin/getty -L 0 /dev/tty2  linux nowait noclear
+    runlevel = "12345"
-tty [2345]  /sbin/getty -L 0 /dev/tty3  linux nowait noclear
+    command  = "/sbin/getty -L 0 /dev/tty1 linux"
    nowait   = true
    noclear  = true
 }
 tty tty2 {
    runlevel = "2345"
    command  = "/sbin/getty -L 0 /dev/tty2 linux"
    nowait   = true
    noclear  = true
 }
 tty tty3 {
    runlevel = "2345"
    command  = "/sbin/getty -L 0 /dev/tty3 linux"
    nowait   = true
    noclear  = true
 }
 # Use built-in getty for serial port and USB serial
-#tty [12345] /dev/ttyAMA0 noclear nowait
+#tty ttyAMA0 { runlevel = "12345"  device = "/dev/ttyAMA0"  noclear = true  nowait = true }
-#tty [12345] /dev/ttyUSB0 noclear
+#tty ttyUSB0 { runlevel = "12345"  device = "/dev/ttyUSB0"  noclear = true }
 # Just give me a shell, I need to debug this embedded system!
-#tty [12345] console noclear nologin
+#tty console { runlevel = "12345"  device = "@console"  noclear = true  nologin = true }
 ```
-The `service` stanza, as well as `task`, `run` and others are described in
+The `service` block, as well as `task`, `run` and others are described in
 full in the [Services Syntax](config/services.md) section.
 Here's a quick overview of some of the most common components needed to start
 a UNIX daemon:
 ```
-service [LVLS] <COND> log env:[-]/etc/default/daemon daemon ARGS -- Example daemon
+service NAME {                              <-- Supervised program (daemon)
-^       ^      ^      ^   ^                          ^      ^       ^
+    description = "Example daemon"          <-- Optional description
-|       |      |      |   |                          |      |        `---------- Optional description
+    runlevel    = "2345"                    <-- Optional runlevels
-|       |      |      |   |                          |       `------------------ Daemon arguments
+    conditions  = { "net/route/default" }   <-- Optional conditions
-|       |      |      |   |                           `------------------------- Path to daemon
+    envfile     = "-/etc/default/daemon"    <-- Optional env. file
-|       |      |      |    `---------------------------------------------------- Optional env. file
+    log { }                                 <-- Redirect output to log
-|       |      |       `-------------------------------------------------------- Redirect output to log
+    command     = "daemon ARGS"             <-- Path to daemon, and its arguments
-|       |       `--------------------------------------------------------------- Optional conditions
+}
 |        `---------------------------------------------------------------------- Optional Runlevels
 `------------------------------------------------------------------------------ Supervised program (daemon)
 ```
-Some components are optional: runlevel(s), condition(s) and description,
+Only `command` is required, which makes simple cases short while leaving
-making it easy to create simple start scripts and still possible for more
+room for more advanced uses:
 advanced uses as well:
-    service /usr/sbin/sshd -D
+    service sshd {
        command = "/usr/sbin/sshd -D"
    }
 Dependencies are handled using [conditions](conditions.md).  One of
 the most common conditions is to wait for basic networking to become
 available:
-    service <net/route/default> nginx -- High performance HTTP server
+    service nginx {
        description = "High performance HTTP server"
        conditions  = { "net/route/default" }
        command     = "nginx"
    }
 Here is another example where we instruct Finit to not start BusyBox
 `ntpd` until `syslogd` has started properly.  Finit waits for `syslogd`
 to create its PID file, by default `/var/run/syslogd.pid`.
-    service [2345] log <!pid/syslogd> ntpd -n -N -p pool.ntp.org
+    service ntpd {
-    service [S12345] syslogd -n -- Syslog daemon
+        runlevel      = "2345"
        conditions    = { "pid/syslogd" }
        reload-signal = "none"
        log { }
        command       = "ntpd -n -N -p pool.ntp.org"
    }
-Notice the `log` keyword, BusyBox `ntpd` uses `stderr` for logging when
+    service syslogd {
-run in the foreground.  With `log` Finit redirects `stdout` + `stderr`
+        description = "Syslog daemon"
-to the system log daemon using the command line `logger(1)` tool.
+        runlevel    = "S12345"
        command     = "syslogd -n"
    }
 Notice the empty `log` block, BusyBox `ntpd` uses `stderr` for logging
 when run in the foreground.  With it Finit redirects `stdout` +
 `stderr` to the system log daemon using the command line `logger(1)`
 tool.
 A service, or task, can have multiple dependencies listed.  Here we wait
 for *both* `syslogd` to have started and basic networking to be up:
-    service [2345] log <pid/syslogd,net/route/default> ntpd -n -N -p pool.ntp.org
+    service ntpd {
        runlevel   = "2345"
        conditions = { "pid/syslogd", "net/route/default" }
        log { }
        command    = "ntpd -n -N -p pool.ntp.org"
    }
 If either condition fails, e.g. loss of networking, `ntpd` is stopped
 and as soon as it comes back up again `ntpd` is restarted automatically.
@@ -18,9 +18,9 @@ waits for user input before handing over to `/bin/login`, which is
 responsible for handling the actual authentication.
 ```conf
-tty [12345] /dev/tty1    nowait  linux
+tty tty1   { runlevel = "12345"  device = "/dev/tty1"     term = "linux"  nowait = true }
-tty [12345] /dev/ttyAMA0 noclear vt100
+tty ttyAMA0 { runlevel = "12345"  device = "/dev/ttyAMA0"  term = "vt100"  noclear = true }
-tty [12345] /sbin/getty  -L /dev/ttyAMA0 vt100
+tty getty   { runlevel = "12345"  command = "/sbin/getty -L /dev/ttyAMA0 vt100" }
 ```
 Users of embedded systems may want to enable automatic serial console
@@ -29,7 +29,7 @@ system uses `ttyS0`, `ttyAMA0`, `ttyMXC0`, or anything else.  Finit
 figures it out by querying sysfs: `/sys/class/tty/console/active`.
 ```conf
-tty [12345] @console linux noclear
+tty console { runlevel = "12345"  device = "@console"  term = "linux"  noclear = true }
 ```
 Notice the optional `noclear`, `nowait`, and `nologin` flags.  The
@@ -40,21 +40,21 @@ see the [TTY and Consoles](config/tty.md) section.
 **Runlevels**
 Support for SysV init-style [runlevels][5] is available, in the same
-minimal style as everything else in Finit.  The `[2345]` syntax can be
+minimal style as everything else in Finit.  The `runlevel` setting
-applied to service, task, run, and TTY stanzas.
+applies to service, task, run, and tty blocks alike.
 Reserved runlevels are 0 and 6, halt and reboot, respectively just like
 SysV init.  Runlevel 1 can be configured freely, but is recommended to
 be kept as the system single-user runlevel since Finit will not start
-networking here.  The configured `runlevel NUM` from `/etc/finit.conf`
+networking here.  The configured `runlevel` from `/etc/finit.conf`
 is what Finit changes to after bootstrap, unless 'single' (or 'S') is
 given on the kernel cmdline, in which case runlevel 1 is started.
-All services in runlevel S) are started first, followed by the desired
+All services in runlevel S are started first, followed by the desired
 run-time runlevel.  Run tasks in runlevel S can be started in sequence
-by using `run [S] cmd`.  Changing runlevels at runtime is done like any
+by using a `run` block with `runlevel = "S"`.  Changing runlevels at
-other init, e.g. <kbd>init 4</kbd>, but also using the more advanced
+runtime is done like any other init, e.g. <kbd>init 4</kbd>, but also
-[`initctl`](initctl.md) tool.
+using the more advanced [`initctl`](initctl.md) tool.
 **Conditions**
@@ -86,8 +86,17 @@ the condition `<hw/model/foo>` when starting other scripts.  Here is an
 example:
 ```
-run  [S]                /path/to/ident    --
+run ident {
-task [2] <hw/model/foo> /path/to/foo-init -- Initializing Foo board
+    description = ""
    runlevel    = "S"
    command     = "/path/to/ident"
 }
 task foo-init {
    description = "Initializing Foo board"
    runlevel    = "2"
    conditions  = { "hw/model/foo" }
    command     = "/path/to/foo-init"
 }
 ```
 > [!TIP]
@@ -117,7 +126,7 @@ hook into the boot process or respond to various I/O.
 For more information, see the [Plugins](plugins.md) section.
-**Automatic Reload**
+**Automatic Reload**{ #automatic-reload }
 By default, Finit monitors `/etc/finit.d/` and `/etc/finit.d/enabled/`
 registering any changes to `.conf` files.  To activate a change the user
@@ -141,17 +150,20 @@ required privileges instead of running as root. This improves security by
 following the principle of least privilege.
 ```conf
-service [2345] name:nginx \
+service nginx {
-        www-data:www-data \
+    runlevel     = "2345"
-        caps:^cap_net_bind_service \
+    user         = "www-data"
-        /usr/sbin/nginx -g 'daemon off;'
+    group        = "www-data"
    capabilities = { "^cap_net_bind_service" }
    command      = "/usr/sbin/nginx -g 'daemon off;'"
 }
 ```
 In this example, nginx runs as the unprivileged `www-data` user but retains
 the ability to bind to privileged ports (80, 443) through the
 `cap_net_bind_service` capability.
-The `caps:` directive uses the IAB (Inheritable, Ambient, Bounding) format:
+The `capabilities` list uses the IAB (Inheritable, Ambient, Bounding) format:
 - `^` = Ambient (recommended) - capabilities survive exec()
 - `%` = Inheritable only - requires file capabilities
 - `!` = Bounding - block from acquiring capability
@@ -159,13 +171,33 @@ The `caps:` directive uses the IAB (Inheritable, Ambient, Bounding) format:
 Multiple capabilities can be specified as comma-separated:
 ```conf
-caps:^cap_net_raw,^cap_net_admin,!cap_sys_admin
+capabilities = { "^cap_net_raw", "^cap_net_admin", "!cap_sys_admin" }
 ```
 See the [Linux Capabilities](config/capabilities.md) section for detailed
 information, examples, and security best practices.
 **PAM Sessions**
 A service can run inside a PAM session, so the `session` stack in
 `/etc/pam.d` applies to it, e.g. limits from `pam_limits`:
 ```conf
 service weston {
    user    = "weston"
    pam     = "weston-autologin"
    command = "/usr/bin/weston --continue-without-input"
 }
 ```
 Without a `user` the session is for root.  Requires a build with PAM
 support, which is the default; see `--disable-pam`.
 See the [PAM Sessions](config/pam.md) section for the pam.d file the
 example needs, and for how PAM and Finit settings interact.
 **Supplementary Groups**
 Finit supports supplementary groups for services, allowing them to access
@@ -210,15 +242,19 @@ The name of each sub-group is taken from the username.
 A fourth group also exists, the `root` group.  It is also _reserved_ and
 primarily intended for RT tasks.  If you have RT tasks they need to be
-declared as such in their service stanza like this:
+declared as such in their service block like this:
-    service [...] <...> cgroup.root /path/to/foo args -- description
+    service foo {
        cgroup root {}
        command = "/path/to/foo args"
    }
-or
+Every block names the group it joins, so a second RT task says so too:
-    cgroup.root
+    service bar {
-    service [...] <...> /path/to/foo args -- description
+        cgroup root {}
-    service [...] <...> /path/to/bar args -- description
+        command = "/path/to/bar args"
    }
 See the [Cgroups](config/cgroups.md) section for more information, e.g.,
 how to configure per-group limits.
@@ -259,6 +295,10 @@ initctl top                       # Interactive resource monitor
 initctl cond set usr/custom       # Set custom condition
 ```
 `initctl` rides Finit's built-in [D-Bus API](dbus.md) when available,
 which is also open to any other bus client, including `dbus-send` and
 language bindings.
 See the [Commands & Status](initctl.md) section for complete documentation.
@@ -32,6 +32,7 @@ Features
  * [Pre/Post script actions](config/service-wrappers.md)
  * Rudimentary [templating support](config/templating.md)
  * [Tooling](initctl.md) to enable/disable services
  * [D-Bus API](dbus.md), `org.finit` control and signals for bus clients
  * [Automatic reload](features.md#automatic-reload) of modified configuration files (optional)
  * [Built-in getty](config/tty.md)
  * Built-in watchdog, with support for hand-over to [watchdogd][]
@@ -5,6 +5,11 @@ Finit also implements a modern API to query status, and start/stop
 services, called `initctl`.  Unlike `telinit` the `initctl` tool does
 not return until the given command has fully completed.
 Since Finit v5, `initctl` talks to Finit over the built-in
 [D-Bus API](dbus.md) when the bus socket is available, falling back
 to the legacy `INIT_SOCKET` transport.  The `monitor` command streams
 the `org.finit` signals until interrupted.
 ```
 Usage: initctl [OPTIONS] [COMMAND]
@@ -14,6 +19,7 @@ Options:
  -f, --force               Ignore missing files and arguments, never prompt
  -h, --help                This help text
  -j, --json                JSON output in 'status' and 'cond' commands
  -n, --noerr               Ignore error, e.g., already started/enabled/...
  -1, --once                Only one lap in commands like 'top'
  -p, --plain               Use plain table headings, no ctrl chars
  -q, --quiet               Silent, only return status of command
@@ -26,15 +32,8 @@ Commands:
  help                      This help text
  version                   Show program version
-  ls | list                 List all .conf in /etc/finit.d
+  show                      Show     /etc/finit.conf
-  create   <CONF>           Create   .conf in /etc/finit.d/available
+  reload                    Reload   /etc/finit.conf (activate changes)
  delete   <CONF>           Delete   .conf in /etc/finit.d/available
  show     <CONF>           Show     .conf in /etc/finit.d/available
  edit     <CONF>           Edit     .conf in /etc/finit.d/available
  touch    <CONF>           Change   .conf in /etc/finit.d/available
  enable   <CONF>           Enable   .conf in /etc/finit.d/available
  disable  <CONF>           Disable  .conf in /etc/finit.d/enabled
  reload                    Reload  *.conf in /etc/finit.d (activate changes)
  cond     set   <COND>     Set (assert) user-defined conditions     +usr/COND
  cond     get   <COND>     Get status of user-defined condition, see $? and -v
@@ -50,6 +49,7 @@ Commands:
                            Note: Finit .conf file(s) are *not* reloaded!
  restart  <NAME>[:ID]      Restart (stop/start) service by name
  kill     <NAME>[:ID] <S>  Send signal S to service by name, with optional ID
  monitor                   Stream D-Bus signals (service state, conditions) until ^C
  ident    [NAME]           Show matching identities for NAME, or all
  status   <NAME>[:ID]      Show service status, by name
  status                    Show status of services, default command
@@ -65,9 +65,10 @@ Commands:
  halt                      Halt system
  poweroff                  Halt and power off system
  suspend                   Suspend system
-  switch-root NEWROOT [INIT]  Switch to new root filesystem (initramfs only)
+  switch-root ROOT [INIT]   Switch to new root filesystem (initramfs)
  utmp     show             Raw dump of UTMP/WTMP db
 ```
 For services *not* supporting `SIGHUP` the `<!>` notation in the .conf
@@ -1,14 +1,537 @@
-keventd
+Bundled Device Manager
-=======
+======================
-The kernel event daemon bundled with Finit is a simple uevent monitor
+The kernel event daemon `keventd` is a built-in device manager bundled
-for `/sys/class/power_supply`.  It provides the `sys/pwr/ac` condition,
+with Finit.  It replaces the need for external device managers like
-which can be useful to prevent power hungry services like anacron to run
+mdev, mdevd, or udevd on systems where a lighter-weight solution is
-when a laptop is only running on battery, for instance.
+preferred, particularly on embedded systems.
-Since keventd is not an integral part of Finit yet it is not enabled by
+It is enabled by default since Finit v5, and needs libblkid from
-default.  Enable it using `./configure --with-keventd`.  The bundled
+util-linux (the `libblkid-dev` package, or whatever your distribution
-`contrib/` build scripts for Debian, Alpine, and Void have this enabled.
+calls it) to read the filesystem UUID and label behind the
 `/dev/disk/by-uuid/` and `/dev/disk/by-label/` symlinks.  To disable it
 and use an external device manager instead:
-This daemon is planned to be extended with monitoring of other uevents,
+    ./configure --without-keventd
-patches and ideas are welcome in the issue tracker.
+
 Features
 --------
 When started, keventd listens on a `NETLINK_KOBJECT_UEVENT` socket for
 kernel events and handles:
 - **Device node creation**: creates and removes `/dev` nodes with
  correct permissions on device add/remove events
 - **udev rules**: matches events against rules read from
  `/lib/udev/rules.d/`, `/run/udev/rules.d/`, and `/etc/udev/rules.d/`,
  with a curated ruleset derived from eudev installed by default
 - **Persistent symlinks**: creates `by-id` and `by-path` symlinks under
  `/dev/disk/`, `/dev/input/`, and elsewhere, for stable device naming
 - **Firmware loading**: responds to kernel firmware requests by searching
  `/lib/firmware/` and writing firmware data to sysfs
 - **Module loading**: parses `MODALIAS` from uevents and spawns `modprobe`
  to load the appropriate kernel module
 - **Coldplug**: with the `-c` flag, walks `/sys/devices` and triggers
  add events for all devices present at boot
 - **Power supply monitoring**: tracks AC power status and provides the
  `sys/pwr/ac` condition
 - **Device conditions**: sets `dev/*` conditions in the Finit condition
  system when device nodes appear or disappear
 - **Netlink rebroadcast**: rebroadcasts processed uevents to netlink
  group 0x4 for [libudev-zero][] consumers (enabled by default)
 - **D-Bus interface**: `org.finit.Device1` -- settle, trigger, device
  info, rules reload, and queue state over its own bus socket
 Device Nodes
 ------------
 On receiving an `add` event with `MAJOR`, `MINOR`, and `DEVNAME`
 fields, keventd creates the corresponding device node in `/dev` using
 `mknod()`.  Parent directories are created automatically (e.g.,
 `/dev/input/` for `/dev/input/event0`).
 On `remove` events, the device node and its associated symlinks and
 conditions are cleaned up.
 ### Default Permissions
 keventd applies permissions based on built-in rules that match on
 device subsystem and name:
 | **Subsystem** | **Pattern**                                | **Mode** | **Owner:Group** |
 |---------------|--------------------------------------------|----------|-----------------|
 | block         | sd*, vd*, nvme*, mmcblk*, loop*, dm-*, md* | 0660     | root:disk       |
 | tty           | tty[0-9]*                                  | 0620     | root:tty        |
 | tty           | ttyS*, ttyUSB*, ttyACM*                    | 0660     | root:dialout    |
 | input         | event*, mouse*, mice                       | 0660     | root:root       |
 | sound         | *                                          | 0660     | root:audio      |
 | video4linux   | *                                          | 0660     | root:video      |
 | drm           | card*, render*                             | 0660     | root:video      |
 | (any)         | null, zero, full, random, urandom          | 0666     | root:root       |
 | (any)         | console                                    | 0600     | root:root       |
 | (default)     |                                            | 0660     | root:root       |
 udev Rules
 ----------
 Rules are read from `/lib/udev/rules.d/`, `/run/udev/rules.d/`, and
 `/etc/udev/rules.d/`, plus any directory passed with `-r`.  Files need a
 `.rules` suffix.  Like udev, all files sort together by filename,
 whichever directory they live in, and a file masks one of the same name
 in an earlier directory: `/etc/` overrides `/run/`, which overrides
 `/lib/`, and the `-r` directory overrides them all.  A symlink to
 `/dev/null` in `/etc/udev/rules.d/` disables the `/lib/` file of the
 same name.
 The syntax is the one described in [udev(7)][].  What follows is the
 subset keventd understands, not a second copy of the grammar.  To pick up
 edited rules, call `RulesReload` on
 [`org.finit.Device1`](#d-bus-interface-orgfinitdevice1).  `initctl reload`
 does not touch them.
 ### Match Keys
 | **Key**                                           | **Matches**                                                              |
 |---------------------------------------------------|--------------------------------------------------------------------------|
 | `ACTION`                                          | `add`, `remove`, `change`, `move`, `bind`, `unbind`, `online`, `offline` |
 | `DEVPATH`                                         | kernel device path, without the `/sys` prefix                            |
 | `KERNEL`                                          | sysfs name of the device                                                 |
 | `NAME`                                            | device node name                                                         |
 | `SUBSYSTEM`, `DRIVER`                             | subsystem and bound driver                                               |
 | `ATTR{file}`                                      | sysfs attribute of the device                                            |
 | `SYSCTL{param}`                                   | value under `/proc/sys/`                                                 |
 | `ENV{key}`                                        | uevent property, including ones set by earlier rules                     |
 | `CONST{key}`                                      | `arch`; `virt` reports `container` or nothing                            |
 | `TAG`                                             | tag set by an earlier `TAG+=`                                            |
 | `TEST{octal}`                                     | file exists, optionally with the given permission bits                   |
 | `PROGRAM`                                         | exit status of a program, output kept for `RESULT` and `%c`              |
 | `RESULT`                                          | output of the last `PROGRAM`                                             |
 | `KERNELS`, `SUBSYSTEMS`, `DRIVERS`, `ATTRS{file}` | the device or any of its parents, see below                              |
 Values match literally, as an `fnmatch()` glob, or as `a|b|c` alternatives.
 Both `==` and `!=` work everywhere.
 `SECLABEL`, `OPTIONS`, and `TAGS` parse but do nothing.  Rules using them load
 without complaint and the key is skipped, so `OPTIONS+="static_node=..."`,
 `link_priority=`, `string_escape=`, and `watch` have no effect, and a `TAGS==`
 match never succeeds.
 ### The Parent Chain
 `ATTR{}` reads an attribute of the device the event fired for.  `ATTRS{}` also
 looks at the parents, walking up the sysfs tree until one matches.  For a
 keyboard behind a hub:
    /sys/devices/.../usb2/         <- root hub
                  usb2/2-1/        <- hub
                  usb2/2-1/2-1.4/  <- keyboard, event fires here
 `ATTRS{authorized_default}=="1"` finds no such attribute on the keyboard or
 the hub, reaches the root hub, and matches there.  `KERNELS`, `SUBSYSTEMS`,
 and `DRIVERS` do the same for a parent's name, subsystem, and driver.
 Each of these keys walks the chain on its own.  udev requires all the parent
 keys in one rule to match on the *same* parent, so a rule pairing
 `SUBSYSTEMS=="usb"` with `ATTRS{idVendor}=="1d6b"` is looser here: the two may
 land on different ancestors.  Where that matters, match on one attribute
 specific enough to identify the device by itself.
 ### Assignments
 | **Key**                     | **Effect**                                                               |
 |-----------------------------|--------------------------------------------------------------------------|
 | `NAME=`                     | name of the device node                                                  |
 | `SYMLINK=`, `+=`            | symlinks to create, space separated, relative to `/dev`                  |
 | `OWNER=`, `GROUP=`, `MODE=` | ownership and permissions of the node                                    |
 | `ENV{key}=`, `+=`, `-=`     | set, append to, or clear a property                                      |
 | `TAG+=`, `-=`               | tags for later `TAG==` matching                                          |
 | `RUN+=`                     | program to run once the event is handled, `RUN{builtin}+=` for a builtin |
 | `IMPORT{type}`              | `program`, `file`, `db`, `builtin`, `parent`, `cmdline`                  |
 | `ATTR{file}=`               | write to a sysfs attribute                                               |
 | `SYSCTL{param}=`            | write to `/proc/sys/`                                                    |
 | `LABEL=`, `GOTO=`           | skip ahead to a label                                                    |
 `:=` locks `MODE`, `OWNER`, and `GROUP` against later rules the way udev
 does.  On `NAME` and `ENV{}` it behaves like plain `=` and locks nothing,
 and `SYMLINK:=` is dropped without a word.
 `IMPORT{builtin}` and `RUN{builtin}` can call `blkid`, `hwdb`,
 `input_id`, `kmod`, `net_id`, `path_id`, and `usb_id`.
 ### Substitutions
 | **Long**           | **Short**     | **Expands to**                     |
 |--------------------|---------------|------------------------------------|
 | `$kernel`          | `%k`          | sysfs name of the device           |
 | `$devpath`         | `%p`          | kernel device path                 |
 | `$name`            | `%N`, `%D`    | device node name                   |
 | `$major`, `$minor` | `%M`, `%m`    | device numbers                     |
 | `$driver`          | `%d`          | bound driver                       |
 | `$attr{file}`      | `%s{file}`    | sysfs attribute of the device      |
 | `$env{key}`        |               | uevent property                    |
 | `$result`          | `%c`, `%c{N}` | `PROGRAM` output, or its Nth field |
 | `$root`            |               | `/dev`                             |
 | `$sys`             |               | `/sys`                             |
 |                    | `%n`          | trailing digits of the sysfs name  |
 |                    | `%b`          | `major:minor`                      |
 udev's `$id`, `$parent`, `$links`, and `%E{}` are not implemented, and `%b`
 here is the device number pair rather than udev's parent bus id.  An unknown
 specifier is left in the string as written.
 Persistent Symlinks
 -------------------
 Symlinks come from two places.  A handful are built into keventd and are
 created for every device in the subsystem, whatever rules are loaded.
 For block devices, under `/dev/disk/`:
 - **by-id**: based on the device serial number and model, read from
  sysfs attributes (`/sys/.../device/vendor`, `model`, `serial`)
 - **by-path**: based on the device topology path
 For input devices, under `/dev/input/`:
 - **by-id**: based on the device name from sysfs
 - **by-path**: based on the physical device path
 The rest come from `SYMLINK+=` in the udev rules, so what you get
 depends on the ruleset installed.  The curated rules Finit ships add,
 among others:
 | **Directory**  | **Links**                                              |
 |----------------|--------------------------------------------------------|
 | `/dev/disk/`   | `by-uuid`, `by-label`, `by-partuuid`, `by-partlabel`, `by-diskseq`, and further `by-id` and `by-path` names for NVMe, virtio, MMC, WWN, and FireWire |
 | `/dev/input/`  | longer `by-id` and `by-path` names than the built-in ones, down to the USB interface number |
 | `/dev/serial/` | `by-id`, `by-path`                                     |
 | `/dev/snd/`    | `by-id`, `by-path`                                     |
 | `/dev/v4l/`    | `by-id`, `by-path`                                     |
 | `/dev/tape/`   | `by-id`, `by-path`                                     |
 | `/dev/dri/`    | `by-path`                                              |
 They also set up a few fixed names: `/dev/rtc`, `/dev/cdrom`, and
 `/dev/virtio-ports/<name>`.
 The `by-uuid` and `by-label` links are why keventd needs libblkid.  The
 rules read the filesystem metadata off the device with
 `IMPORT{builtin}="blkid"`, and libblkid is what that builtin calls.
 Built-in and rule-provided symlinks alike are tracked internally and
 removed when the corresponding device is unplugged.
 Firmware Loading
 ----------------
 When a kernel driver requests firmware (via `request_firmware()`), the
 kernel sends a uevent with a `FIRMWARE=` field.  keventd handles this
 by:
 1. Searching for the firmware file in order:
   - `/lib/firmware/updates/<kernel-version>/<name>`
   - `/lib/firmware/updates/<name>`
   - `/lib/firmware/<kernel-version>/<name>`
   - `/lib/firmware/<name>`
 2. Writing `1` to `/sys/<devpath>/loading` to signal start
 3. Copying the firmware data to `/sys/<devpath>/data`
 4. Writing `0` to `/sys/<devpath>/loading` on success (or `-1` on failure)
 This is particularly important early in boot when drivers for graphics
 cards, network adapters, and other hardware need firmware before they
 can operate.
 Module Loading
 --------------
 When a device add event includes a `MODALIAS` field, keventd spawns
 `modprobe -bq <modalias>` to load the matching kernel module.  Module
 loading is done asynchronously (keventd does not wait for modprobe to
 complete) to avoid blocking other event processing.
 Coldplug
 --------
 To handle devices that were present before keventd started, it supports
 a coldplug mode activated with the `-c` flag.  This walks the entire
 `/sys/devices` tree and writes `add` to each `uevent` file, causing the
 kernel to re-emit add events for all existing devices.
 This replaces the separate `coldplug` script previously used with mdev.
 When `-c` is used, keventd defers its pidfile (and the `pid/keventd`
 condition Finit asserts from it) until the coldplug event queue has
 been fully drained.  Services that depend on `<pid/keventd>` can
 therefore assume `/dev` is populated and persistent symlinks are live,
 without needing a separate `settle` step.
 Netlink Rebroadcast
 -------------------
 The Linux kernel sends uevents to netlink multicast group 1 (bit 0) of
 `NETLINK_KOBJECT_UEVENT`.  Only the device manager listens on this raw
 kernel group.  Userspace consumers — applications using libudev —
 expect to receive processed events on a separate netlink group.
 systemd/udevd established the convention of rebroadcasting processed
 events to a separate group, and [libudev-zero][], a daemonless drop-in
 replacement for libudev, listens on group `0x4` for these events.
 Without a device manager rebroadcasting, graphical applications,
 Wayland/X11 compositors, libinput, and anything else using libudev to
 monitor device hotplug will never see any events.
 keventd rebroadcasts by default to netlink group 4 (`0x4`).  A second
 netlink socket is created at startup, and after each uevent has been
 fully processed (device nodes created, symlinks set up, modules loaded),
 the original raw event is sent to the configured group(s).
 Rebroadcasting after processing ensures that device nodes and symlinks
 already exist by the time consumers receive the notification.
 Use `-g GROUP` to override the default group mask, or `-G` to disable
 rebroadcast entirely.  Bit 0 of the group mask is always forced off to
 prevent a feedback loop with the kernel's own multicast group.
 ### Background
 The netlink uevent architecture uses separate multicast groups to
 isolate the kernel-to-device-manager channel from the device-manager-to-
 application channel:
 | **Group** | **Bit** | **Purpose**                                 |
 |-----------|---------|---------------------------------------------|
 | 1         | 0       | Kernel events (device manager listens here) |
 | 4         | 2       | Processed events (libudev consumers listen) |
 This two-group design was established by systemd/udevd and is the de
 facto standard.  [mdevd][] implements the same mechanism via its `-O`
 flag, and keventd follows the same convention.
 For more details, see:
 - [libudev-zero][] — daemonless replacement for libudev
 - [mdevd][] — mdev-compatible device manager with rebroadcast support
 Conditions
 ----------
 keventd provides conditions in two namespaces:
 ### Device Conditions (`dev/`)
 When a device node is created, keventd asserts a corresponding condition
 in `/run/finit/cond/dev/`.  This allows services to wait for specific
 devices:
    service mdadm {
        description = "RAID monitor"
        runlevel    = "2345"
        conditions  = { "dev/sda" }
        command     = "/usr/sbin/mdadm --monitor /dev/md0"
    }
    service gps-daemon {
        description = "GPS daemon"
        runlevel    = "2345"
        conditions  = { "dev/ttyUSB0" }
        command     = "/usr/sbin/gps-daemon"
    }
 Network interfaces are not device nodes and do not live in the `dev/`
 namespace -- a `/dev/wan` node created by a user must not be confused
 with a `wan` interface.  To wait for an interface, use the `netlink`
 plugin's `net/<iface>/exist` condition, plus `net/<iface>/up` (admin
 up) and `net/<iface>/running` (carrier present) to gate on link state:
    service dhcpcd {
        description = "DHCP client"
        runlevel    = "2345"
        conditions  = { "net/wan/exist" }
        command     = "/usr/sbin/dhcpcd"
    }
 keventd provides the parallel `class/net/<iface>` condition, like for
 any other sysfs class device.
 When the device is removed, the condition is cleared and Finit stops
 the dependent services.
 ### Class Conditions (`class/`)
 Many devices live in sysfs without a `/dev/` node -- DSA switch ports,
 IIO sensors, LEDs, backlight, PHYs, regulators.  For those, keventd
 asserts `class/<subsystem>/<sysname>` on every `add` event so services
 can still wait for them:
    service blink-blue {
        description = "LED driver"
        runlevel    = "2345"
        conditions  = { "class/leds/blue" }
        command     = "/usr/sbin/blink-blue"
    }
 The condition is cleared on `remove`.
 ### Driver Conditions (`driver/`)
 `driver/<name>` is asserted while the driver `<name>` is bound to at
 least one device, from the kernel's `bind`/`unbind` uevents.  Use this
 to gate on slow-probing hardware whose readiness isn't marked by a
 class device or `/dev` node, such as a switch core or complex PHY:
    service dsa-probe {
        description = "DSA topology probe"
        runlevel    = "2345"
        conditions  = { "driver/mt7530" }
        command     = "/usr/sbin/dsa-probe"
    }
 A driver bound to several devices keeps the condition asserted until
 the last device is unbound.  To wait for one specific device instance,
 gate on what its probe creates instead: the `class/` condition or
 `/dev` node of the child device.
 ### Power Supply Conditions (`sys/pwr/`)
 keventd monitors the `power_supply` subsystem and provides:
 - `sys/pwr/ac` — asserted when AC power is connected
 This is useful for preventing power-hungry services from running on
 battery:
    service cron {
        description = "Cron daemon"
        runlevel    = "2345"
        conditions  = { "sys/pwr/ac", "pid/syslogd" }
        command     = "cron -f"
    }
 Usage
 -----
    keventd [-cdGhnpSv] [-g GROUP] [-r DIR] [-t SECONDS]
    Options:
      -c        Run coldplug at startup
      -d        Enable debug mode (foreground, verbose)
      -g GROUP  Override netlink rebroadcast group (default: 4)
      -G        Disable netlink rebroadcast entirely
      -h        Show help text
      -n        Run in foreground (no daemon)
      -p        Passive mode: power supply events only
      -r DIR    Extra rules directory, overrides the standard udev paths
      -S        Settle mode: wait for kernel uevent queue to quiet, then exit
      -t SEC    Settle timeout (default 30s, used with -S)
      -v        Show version
 In normal operation, Finit starts keventd automatically via its system
 configuration.  The `-d` flag is useful for debugging device issues --
 it runs keventd in the foreground and logs all received uevents.
 `keventd -S` is a one-shot command, not a flag to the running daemon.
 It is the `udevadm settle` equivalent for migration scenarios:
    keventd -S -t 10 && start-graphical-session
 With D-Bus support it asks the running keventd over
 [`Device1.Settle`](#d-bus-interface-orgfinitdevice1), which tracks the
 event queue where the events actually flow.  When no bus answers --
 another device manager, or a build without D-Bus -- it falls back to
 polling `/sys/kernel/uevent_seqnum` until the kernel's sequence
 counter has been stable for 200ms, then exits zero.  After the
 `-t SECONDS` timeout (default 30) it exits non-zero instead.  The
 fallback works regardless of which device manager is active, or even
 if none is.
 Prefer the condition-based model (`<dev/X>`, `<class/...>`,
 `<driver/...>`) over settle when you control the service definition --
 settle is racy with slow probes that fire after the queue appears
 quiet.  It is provided for legacy boot scripts and init transitions
 where condition wiring isn't feasible.
 Debug logging can also be toggled at runtime by sending `SIGUSR1`:
    kill -USR1 $(pidof keventd)
 D-Bus Interface (`org.finit.Device1`)
 -------------------------------------
 With D-Bus support (default, `--disable-dbus` opts out) keventd serves
 `org.finit.Device1` at `/org/finit/device` on its own brokerless bus,
 `unix:path=/run/keventd/bus`, the same way Finit serves
 [`org.finit`](dbus.md) on `/run/finit/bus`.  There is no forwarding
 between the two -- clients that want both connect to both.
 | Method        | In sig | Out sig | Priv. | Notes                                        |
 |---------------|--------|---------|-------|----------------------------------------------|
 | `Settle`      | `u`    | `b`     | no    | Wait until the event queue drains, timeout in seconds; `false` on timeout |
 | `Trigger`     | `ss`   | —       | yes   | Replay events: action, subsystem glob (empty = all) |
 | `Info`        | `s`    | `a{ss}` | no    | `/run/udev/data` properties for a devpath    |
 | `RulesReload` | —      | `u`     | yes   | Re-read the rules directories, returns rule count |
 | Property          | Sig | Notes                                     |
 |-------------------|-----|-------------------------------------------|
 | `QueueEmpty`      | `b` | No device events in flight                |
 | `SeqnumProcessed` | `t` | Highest kernel seqnum keventd has handled |
 | Signal            | Body                    | Fires when                      |
 |-------------------|-------------------------|---------------------------------|
 | `DeviceProcessed` | `ss` — devpath, action  | An event has been fully handled: node, symlinks, database |
 Example, wait up to ten seconds for the queue to drain:
 ```sh
 dbus-send --address=unix:path=/run/keventd/bus \
          --type=method_call --print-reply --dest=org.finit \
          /org/finit/device org.finit.Device1.Settle uint32:10
 ```
 In passive mode (`-p`) `Trigger` and `RulesReload` refuse -- device
 events are not handled here -- while `Settle` and the queue-state
 properties remain meaningful.
 keventd's conditions are symlinks to Finit's `reconf` generation
 marker, so they read the current generation by construction and never
 enter `flux` -- like user-defined conditions, they need no reassert
 after `initctl reload`.  Device state does not change because Finit
 re-read its configuration.
 Integration with Finit
 ----------------------
 keventd is a standalone daemon started by Finit as an internal service.
 It communicates with Finit exclusively through the filesystem-based
 condition system — creating and removing symlinks in `/run/finit/cond/`.
 This means keventd can also be tested independently:
    # Run in debug mode to see all kernel events
    keventd -d
    # Run with coldplug to populate /dev from scratch
    keventd -c -n
    # Run without rebroadcast (e.g., headless embedded system)
    keventd -c -G
 Only one device manager should be active at a time.  This is settled
 at build time: with the hotplug plugin enabled, Finit starts keventd
 in passive mode (`-p`), leaving device management to the udevd, mdevd,
 or mdev service from `system/10-hotplug.conf` and monitoring only
 power supply events.  Without the hotplug plugin, keventd runs as the
 system device manager (`keventd -c`).
 [libudev-zero]: https://github.com/illiliti/libudev-zero
 [mdevd]:        https://skarnet.org/software/mdevd/
 [udev(7)]:      https://man7.org/linux/man-pages/man7/udev.7.html
@@ -35,7 +35,15 @@ For your convenience a set of *optional* plugins are available:
 > the `/etc/fstab` file and in the Linux kernel config.
 * *dbus.so*: Setup and start system message bus, D-Bus, at boot.
-  _Optional plugin._
+  Enabled by default, and a no-op on systems without a `dbus-daemon`.
  The daemon is declared in `20-dbus.conf` and its directories in
  `tmpfiles.d/dbus.conf`, both overridable from `/etc`; the plugin
  itself only handles what has to inspect the running system.
  Not to be confused with Finit's built-in [D-Bus API](dbus.md): the
  plugin (`--disable-dbus-plugin`) starts the external system bus
  daemon, while the built-in support (`--disable-dbus`) is the
  `org.finit` interface served by Finit itself.
 * *hook-scripts.so*: Trigger the execution of scripts from plugin hook
  points (see [Hooks](#hooks)).  _Optional plugin._
@@ -70,8 +78,8 @@ For your convenience a set of *optional* plugins are available:
  name of the module to load.  Any line starting with the standard UNIX
  comment character, `#`, or `;`, is skipped.
-  Modules are by default loaded in runlevel `S` using the `task` stanza.
+  Modules are by default loaded in runlevel `S` using a `task` block.
-  Each module gets a unique `name:modprobe.foo`, and optional`:ID`.  The
+  Each module is named `modprobe.foo`, with an optional `:ID`.  The
  runlevel can be changed per file using:
        set runlevel 2345
@@ -15,7 +15,11 @@ done slightly differently and on systems with udev you might want to add
 the following one-shot task early in your `/etc/finit.conf`:
 ```conf
-run [S] udevadm settle --timeout=120 -- Waiting for udev
+run udevadm {
    description = "Waiting for udev"
    runlevel    = "S"
    command     = "udevadm settle --timeout=120"
 }
 ```
 Finit has a built-in Getty for TTYs, but requires a working `/bin/login`
@@ -13,20 +13,37 @@ more of a policy for the user to define.  Normally only runlevels 1-6
 are used, and even more commonly, only the default runlevel is used.
 To specify an allowed set of runlevels for a `service`, `run` command,
-`task`, or `tty`, add `[NNN]` to your `/etc/finit.conf`, like this:
+`task`, or `tty`, set `runlevel` in your `/etc/finit.conf`, like this:
 ```
-service [S12345] syslogd -n -x             -- System log daemon
+service syslogd {
-run     [S]      /etc/init.d/acpid start   -- Starting ACPI Daemon
+    description = "System log daemon"
-task    [S]      /etc/init.d/kbd start     -- Preparing console
+    runlevel    = "S12345"
-service [S12345] <pid/syslogd> klogd -n -x -- Kernel log daemon
+    command     = "syslogd -n -x"
 }
 run acpid {
    description = "Starting ACPI Daemon"
    runlevel    = "S"
    command     = "/etc/init.d/acpid start"
 }
 task kbd {
    description = "Preparing console"
    runlevel    = "S"
    command     = "/etc/init.d/kbd start"
 }
 service klogd {
    description = "Kernel log daemon"
    runlevel    = "S12345"
    conditions  = { "pid/syslogd" }
    command     = "klogd -n -x"
 }
-tty     [12345]  /dev/tty1
+tty tty1 { runlevel = "12345"  device = "/dev/tty1" }
-tty     [2]      /dev/tty2
+tty tty2 { runlevel = "2"      device = "/dev/tty2" }
-tty     [2]      /dev/tty3
+tty tty3 { runlevel = "2"      device = "/dev/tty3" }
-tty     [2]      /dev/tty4
+tty tty4 { runlevel = "2"      device = "/dev/tty4" }
-tty     [2]      /dev/tty5
+tty tty5 { runlevel = "2"      device = "/dev/tty5" }
-tty     [2]      /dev/tty6
+tty tty6 { runlevel = "2"      device = "/dev/tty6" }
 ```
 In this example syslogd is first started, in parallel, and then acpid is
@@ -46,8 +63,14 @@ are also removed when they have completed, `initctl show` will not list
 them.
 ```
-task [S] echo "foo" | cat >/tmp/bar
+task foo {
-run  [S] echo "$HOME" >/tmp/secret
+    runlevel = "S"
    command  = "echo \"foo\" | cat >/tmp/bar"
 }
 run secret {
    runlevel = "S"
    command  = "echo \"$HOME\" >/tmp/secret"
 }
 ```
 Switching between runlevels can be done by calling init with a single
@@ -3,18 +3,18 @@ Runparts & `/etc/rc.local`
 At the end of the boot, when all bootstrap (`S`) tasks and services have
 started, but not networking, Finit calls its built-in [run-parts(8)][]
-command on any configured `runparts <DIR>` directory.  This happens just
+command on any configured `runparts = "DIR"` directory.  This happens just
 before changing to the configured runlevel (default 2).  (Networking is
 enabled just prior to changing from single user mode.)
-```shell
+```aconf
-runparts /etc/rc.d/
+runparts = "/etc/rc.d/"
 ```
 Right after the runlevel change when all services have started properly,
 `/etc/rc.local` is called.
-No configuration stanza in `/etc/finit.conf` is required for `rc.local`.
+No setting in `/etc/finit.conf` is required for `rc.local`.
 If it exists and is an executable shell script Finit calls it at the very
 end of the boot, before calling the `HOOK_SYSTEM_UP`.  See more in the
 [Hook Scripts](plugins.md#hooks) section.
@@ -27,13 +27,22 @@ Finit can *not* start and monitor a daemon that:
 ### Forks to bg w/ PID file
-There are two syntax variants, type 1 and type 2.  The former is the
+There are two variants.  The former names the pidfile to watch, as for
-traditional one used also for `sysv` start/stop scripts, and the latter
+`sysv` start/stop scripts, and the latter is inspired by systemd, with a
-is inspired by systemd, with a twist -- it lets Finit guess the pifdile
+twist -- it lets Finit guess the pidfile based on the standard path and
-to look for based on the standard path and the basename of the command.
+the basename of the command.
-    service pid:!/run/serv.pid serv       -- Forking service, type 1
+    service serv {
-    service type:forking       serv       -- Forking service, type 2
+        description = "Forking service, type 1"
        pidfile     = "/run/serv.pid"
        command     = "serv"
    }
    service serv {
        description = "Forking service, type 2"
        type        = "forking"
        command     = "serv"
    }
 In this example the resulting files to watch for are `/run/serv.pid` and
 `/var/run/serv.pid`, respectively.  On most modern Linux systems this is
@@ -41,17 +50,29 @@ the same directory (`/var/run` is a symlink to `../run`).
 ### Runs in fg w/ PID file
-    service                    serv -n -p -- Foreground service w/ PID file
+    service serv {
        description = "Foreground service w/ PID file"
        command     = "serv -n -p"
    }
 ### Runs in fg w/o PID file
 Same as previous, but we tell Finit to create the PID file, because we
 need it to synchronize start/stop of a dependent service.
-    service pid:/run/serv.pid  serv -n    -- Foreground service w/o PID file
+    service serv {
        description    = "Foreground service w/o PID file"
        pidfile        = "/run/serv.pid"
        pidfile-create = true
        command        = "serv -n"
    }
 ### Runs in fg w/ custom PID file
-    service pid:/run/servy.pid serv -n -p -P /run/servy.pid -- Foreground service w/ custom PID file
+    service serv {
        description = "Foreground service w/ custom PID file"
        pidfile     = "/run/servy.pid"
        command     = "serv -n -p -P /run/servy.pid"
    }
 [1]: config/service-sync.md
@@ -51,26 +51,52 @@ Configuration file `/etc/finit.conf` in the initramfs:
 # /etc/finit.conf in initramfs
 # Mount the real root filesystem
-run [S] name:mount-root /bin/mount /dev/sda1 /mnt/root -- Mounting root filesystem
+run mount-root {
    description = "Mounting root filesystem"
    runlevel    = "S"
    command     = "/bin/mount /dev/sda1 /mnt/root"
 }
 # Switch to real root after mount completes
-run [S] name:switch-root /sbin/initctl switch-root /mnt/root -- Switching to real root
+run switch-root {
    description = "Switching to real root"
    runlevel    = "S"
    command     = "/sbin/initctl switch-root /mnt/root"
 }
 ```
 For more complex setups (LUKS, LVM, etc.):
 ```
 # Unlock LUKS volume
-run [S] name:cryptsetup /sbin/cryptsetup open /dev/sda2 cryptroot -- Unlocking encrypted root
+# The tty setting is required so cryptsetup can prompt for a passphrase
 run cryptsetup {
    description = "Unlocking encrypted root"
    runlevel    = "S"
    tty         = "@console"
    command     = "/sbin/cryptsetup open /dev/sda2 cryptroot"
 }
 # Activate LVM
-run [S] name:lvm /sbin/lvm vgchange -ay -- Activating LVM volumes
+run lvm {
    description = "Activating LVM volumes"
    runlevel    = "S"
    command     = "/sbin/lvm vgchange -ay"
 }
 # Mount root
-run [S] name:mount-root /bin/mount /dev/vg0/root /mnt/root -- Mounting root
+run mount-root {
    description = "Mounting root"
    runlevel    = "S"
    command     = "/bin/mount /dev/vg0/root /mnt/root"
 }
 # Switch root
-run [S] name:switch-root /sbin/initctl switch-root /mnt/root -- Switching to real root
+run switch-root {
    description = "Switching to real root"
    runlevel    = "S"
    command     = "/sbin/initctl switch-root /mnt/root"
 }
 ```
@@ -84,15 +110,34 @@ difficult in runlevel S, you can perform the switch-root in runlevel 1:
 # /etc/finit.conf in initramfs
 # Start mdevd for device handling
-service [S] name:mdevd notify:s6 /sbin/mdevd -D %n -- Device event daemon
+service mdevd {
-run [S] name:coldplug <service/mdevd/ready> /sbin/mdevd-coldplug -- Coldplug devices
+    description = "Device event daemon"
    runlevel    = "S"
    notify      = "s6"
    command     = "/sbin/mdevd -D %n"
 }
 run coldplug {
    description = "Coldplug devices"
    runlevel    = "S"
    conditions  = { "service/mdevd/ready" }
    command     = "/sbin/mdevd-coldplug"
 }
 # Mount the real root filesystem (after devices are ready)
-run [S] name:mount-root <run/coldplug/success> /bin/mount /dev/sda1 /mnt/root -- Mounting root
+run mount-root {
    description = "Mounting root"
    runlevel    = "S"
    conditions  = { "run/coldplug/success" }
    command     = "/bin/mount /dev/sda1 /mnt/root"
 }
 # Transition to runlevel 1 after all S tasks complete
 # The switch-root runs cleanly in runlevel 1
-run [1] name:switch-root /sbin/initctl switch-root /mnt/root -- Switching to real root
+run switch-root {
    description = "Switching to real root"
    runlevel    = "1"
    command     = "/sbin/initctl switch-root /mnt/root"
 }
 ```
 This approach separates the initramfs setup (runlevel S) from the
@@ -1,10 +1,10 @@
 Bundled Watchdog Daemon
 =======================
-When built `--with-watchdog` a separate service is built and installed
+A separate service is built and installed in `/libexec/finit/watchdogd`,
-in `/libexec/finit/watchdogd`.  If this exists at runtime, and the WDT
+unless disabled with `--without-watchdog`.  If this exists at runtime,
-device node exists, Finit will start it and treat it as the elected
+and the WDT device node exists, Finit will start it and treat it as the
-watchdog service to delegate its reboot to.  This delegation is to
+elected watchdog service to delegate its reboot to.  This delegation is to
 ensure that the system is rebooted by a hardware watchdog timer -- on
 many embedded systems this is crucial to ensure all circuits on the
 board are properly reset for the next boot, in effect ensuring the
@@ -0,0 +1,4 @@
 .deps/
 keventd
 Makefile
 Makefile.in
@@ -0,0 +1,67 @@
 AM_CPPFLAGS        = -D_XOPEN_SOURCE=600 -D_BSD_SOURCE -D_GNU_SOURCE -D_DEFAULT_SOURCE
 AM_CPPFLAGS       += -I$(top_srcdir)/src
 pkglibexec_PROGRAMS = keventd
 keventd_SOURCES    = keventd.c keventd.h uevent.c \
 		     udevdb.c udevdb.h \
 		     sysfs.c sysfs.h \
 		     rules.c rules.h \
 		     builtin.c builtin.h \
 		     $(top_srcdir)/src/util.c $(top_srcdir)/src/util.h
 # Per-target flags exist even when their conditional is false, so
 # assign the base unconditionally and append under DBUS
 keventd_CPPFLAGS   = $(AM_CPPFLAGS)
 keventd_CFLAGS     = -W -Wall -Wextra -std=gnu99
 # Silence noisy false positives from PATH_MAX-into-PATH_MAX sysfs path
 # concatenations; real concerns (e.g. USB strings into small buffers) are
 # handled via explicit checks where present.  Matches systemd-udev policy.
 keventd_CFLAGS    += -Wno-format-truncation
 keventd_CFLAGS    += $(lite_CFLAGS)
 keventd_CFLAGS    += $(uev_CFLAGS)
 keventd_CFLAGS    += $(blkid_CFLAGS)
 keventd_LDADD      = $(lite_LIBS)
 keventd_LDADD     += $(uev_LIBS)
 keventd_LDADD     += $(blkid_LIBS)
 if DBUS
 keventd_SOURCES   += dbus.c
 keventd_CPPFLAGS  += -I$(top_srcdir)/libink
 keventd_LDADD    += $(top_builddir)/libink/libink.la
 endif
 # Curated udev rules derived from eudev 3.2.14 (GPL-2.0-or-later).
 # Installed to /lib/udev/rules.d/ so existing third-party rules and
 # local overrides under /etc/udev/rules.d/ coexist with standard udev
 # precedence.  See .notes/curated-rules-manifest.md.
 if UDEV_RULES
 udevrulesdir       = $(prefix)/lib/udev/rules.d
 dist_udevrules_DATA = \
 	rules.d/50-udev-default.rules \
 	rules.d/60-autosuspend.rules \
 	rules.d/60-block.rules \
 	rules.d/60-cdrom_id.rules \
 	rules.d/60-drm.rules \
 	rules.d/60-evdev.rules \
 	rules.d/60-fido-id.rules \
 	rules.d/60-input-id.rules \
 	rules.d/60-persistent-alsa.rules \
 	rules.d/60-persistent-input.rules \
 	rules.d/60-persistent-storage.rules \
 	rules.d/60-persistent-storage-tape.rules \
 	rules.d/60-persistent-v4l.rules \
 	rules.d/60-sensor.rules \
 	rules.d/60-serial.rules \
 	rules.d/64-btrfs.rules \
 	rules.d/70-camera.rules \
 	rules.d/70-joystick.rules \
 	rules.d/70-memory.rules \
 	rules.d/70-mouse.rules \
 	rules.d/70-touchpad.rules \
 	rules.d/75-net-description.rules \
 	rules.d/75-probe_mtd.rules \
 	rules.d/78-sound-card.rules \
 	rules.d/80-drivers.rules \
 	rules.d/80-net-name-slot.rules \
 	rules.d/81-net-dhcp.rules
 endif
@@ -0,0 +1,46 @@
 /* Builtin command dispatch for keventd rules engine
 *
 * Copyright (c) 2025  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
 #ifndef KEVENTD_BUILTIN_H_
 #define KEVENTD_BUILTIN_H_
 #include "keventd.h"
 /*
 * Execute a builtin command from a udev rule.
 * cmd is the full command string, e.g. "hwdb --subsystem=input" or "path_id".
 * Returns 0 on success, -1 if the builtin is unknown or fails.
 */
 int builtin_run(struct uevent *ev, const char *cmd);
 /* True if NAME is a registered builtin (e.g. "path_id", "usb_id"). */
 int builtin_has(const char *name);
 #endif /* KEVENTD_BUILTIN_H_ */
 /**
 * Local Variables:
 *  indent-tabs-mode: t
 *  c-file-style: "linux"
 * End:
 */
@@ -0,0 +1,577 @@
 /* keventd D-Bus interface: org.finit.Device1 on its own local bus
 *
 * keventd serves /run/keventd/bus the same way Finit serves
 * /run/finit/bus: brokerless, libink, one socket per daemon.  No
 * message forwarding exists between the two, by design -- clients
 * that want both connect to both.
 *
 * Copyright (c) 2026  Joachim Wiberg <troglobit@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
 #include "config.h"
 #ifdef HAVE_DBUS
 #include <errno.h>
 #include <stdlib.h>
 #include <string.h>
 #include <syslog.h>
 #include <time.h>
 #include <unistd.h>
 #include <uev/uev.h>
 #ifdef _LIBITE_LITE
 # include <libite/lite.h>
 #else
 # include <lite/lite.h>
 #endif
 #include "link.h"
 #include "keventd.h"
 #include "udevdb.h"
 #include "util.h"
 #define DEVBUS_DIR         "/run/keventd"
 #define DEVBUS_SOCKET      DEVBUS_DIR "/bus"
 #define DEVBUS_PATH_OBJECT "/org/finit/device"
 #define DEVBUS_INTERFACE   "org.finit.Device1"
 #define DEVBUS_MAX_PEERS   16
 #define DEVBUS_MAX_SETTLES 8
 struct peer {
 	uev_t              watcher;
 	link_connection_t *conn;
 	int                dead;
 	TAILQ_ENTRY(peer)  link;
 };
 static TAILQ_HEAD(, peer) peers = TAILQ_HEAD_INITIALIZER(peers);
 static TAILQ_HEAD(, peer) reapq = TAILQ_HEAD_INITIALIZER(reapq);
 static link_server_t     *server;
 static uev_t              accept_watcher;
 static uev_t              reap_timer;
 static uev_ctx_t         *devbus_ctx;
 static size_t             peer_count;
 static int                bus_passive;
 /* Parked Settle() calls with their own deadlines */
 struct settle {
 	link_connection_t *conn;
 	link_authz_t       tok;
 	uint64_t           deadline;	/* CLOCK_MONOTONIC ms */
 };
 static struct settle settles[DEVBUS_MAX_SETTLES];
 static uev_t         settle_timer;
 static int           settle_armed;
 /*
 * Same policy as /run/finit/bus: root and members of the --with-group
 * group.  The group set comes from the kernel (SO_PEERGROUPS), the
 * owning gid is resolved once at init so no call ever hits NSS.
 */
 static gid_t privileged_gid = (gid_t)-1;	/* DEFGROUP, resolved at init */
 static int caller_is_privileged(uid_t uid, const gid_t *groups, int ngroups,
 				void *userdata)
 {
 	(void)userdata;
 	if (uid == 0)
 		return 1;
 	if (privileged_gid == (gid_t)-1)
 		return 0;	/* no owning group to match against */
 	for (int i = 0; i < ngroups; i++) {
 		if (groups[i] == privileged_gid)
 			return 1;
 	}
 	return 0;
 }
 static void link_log_cb(void *userdata, const char *func, const char *msg)
 {
 	(void)userdata;
 	logit(LOG_DEBUG, "%s():%s", func, msg);
 }
 /* ---------- peer lifecycle, same shape as src/dbus.c ---------- */
 static void peer_reap(uev_t *w, void *arg, int events)
 {
 	struct peer *p;
 	(void)w; (void)arg; (void)events;
 	while ((p = TAILQ_FIRST(&reapq))) {
 		TAILQ_REMOVE(&reapq, p, link);
 		link_connection_close(p->conn);
 		free(p);
 	}
 }
 static void peer_drop(struct peer *p)
 {
 	int i;
 	if (p->dead)
 		return;
 	p->dead = 1;
 	uev_io_stop(&p->watcher);
 	TAILQ_REMOVE(&peers, p, link);
 	peer_count--;
 	/* Settles parked on this connection die with it */
 	for (i = 0; i < DEVBUS_MAX_SETTLES; i++) {
 		if (settles[i].conn == p->conn)
 			settles[i].conn = NULL;
 	}
 	TAILQ_INSERT_TAIL(&reapq, p, link);
 	uev_timer_set(&reap_timer, 10, 0);
 }
 static void peer_cb(uev_t *w, void *arg, int events)
 {
 	struct peer *p = arg;
 	(void)w;
 	if (UEV_ERROR == events || link_connection_process(p->conn) < 0)
 		peer_drop(p);
 }
 static void accept_cb(uev_t *w, void *arg, int events)
 {
 	(void)arg;
 	if (UEV_ERROR == events) {
 		logit(LOG_ERR, "D-Bus accept watcher error");
 		return;
 	}
 	for (;;) {
 		link_connection_t *conn = NULL;
 		struct peer *p;
 		if (link_server_accept(server, &conn) < 0) {
 			if (errno != EAGAIN && errno != EWOULDBLOCK)
 				logit(LOG_ERR, "Failed accepting D-Bus client: %s",
 				      strerror(errno));
 			break;
 		}
 		if (peer_count >= DEVBUS_MAX_PEERS) {
 			logit(LOG_WARNING, "D-Bus peer cap reached (%zu), dropping",
 			      peer_count);
 			link_connection_close(conn);
 			continue;
 		}
 		p = calloc(1, sizeof(*p));
 		if (!p) {
 			link_connection_close(conn);
 			continue;
 		}
 		p->conn = conn;
 		TAILQ_INSERT_TAIL(&peers, p, link);
 		peer_count++;
 		if (uev_io_init(w->ctx, &p->watcher, peer_cb, p,
 				link_connection_get_fd(conn), UEV_READ))
 			peer_drop(p);
 	}
 }
 /* ---------- parked Settle() bookkeeping ---------- */
 static void settle_sweep(uev_t *w, void *arg, int events);
 /*
 * The queue can only drain when an event is processed, and
 * devbus_notify() sweeps on exactly that; the timer exists solely to
 * enforce deadlines, so arm it one-shot for the nearest one.
 */
 static void settle_arm(uint64_t deadline)
 {
 	uint64_t now = kev_now_ms();
 	int ms = deadline > now ? (int)(deadline - now) : 1;
 	if (!settle_armed) {
 		uev_timer_init(devbus_ctx, &settle_timer, settle_sweep,
 			       NULL, ms, 0);
 		settle_armed = 1;
 	} else {
 		uev_timer_set(&settle_timer, ms, 0);
 	}
 }
 /*
 * Resume parked settles: all of them when the queue drained (the
 * handler re-runs, sees the empty queue, replies true), expired ones
 * otherwise (the handler re-runs, sees link_call_resumed(), replies
 * false).
 */
 static void settle_sweep(uev_t *w, void *arg, int events)
 {
 	uint64_t next = 0;
 	uint64_t now = kev_now_ms();
 	int empty = kev_queue_empty();
 	int i;
 	(void)w; (void)arg; (void)events;
 	for (i = 0; i < DEVBUS_MAX_SETTLES; i++) {
 		struct settle *s = &settles[i];
 		if (!s->conn)
 			continue;
 		if (empty || now >= s->deadline) {
 			link_connection_t *conn = s->conn;
 			link_authz_t       tok  = s->tok;
 			s->conn = NULL;
 			link_call_resume(conn, tok);
 			continue;
 		}
 		if (!next || s->deadline < next)
 			next = s->deadline;
 	}
 	if (next) {
 		settle_arm(next);
 	} else if (settle_armed) {
 		uev_timer_stop(&settle_timer);
 		settle_armed = 0;
 	}
 }
 /* ---------- org.finit.Device1 ---------- */
 static int device1_settle(link_call_t *call, void *u)
 {
 	link_writer_t *w;
 	uint32_t timeout;
 	int i;
 	int empty;
 	(void)u;
 	if (link_call_read_u32(call, &timeout) < 0)
 		return link_call_reply_error(call,
 			"org.freedesktop.DBus.Error.InvalidArgs",
 			"expected (u)");
 	empty = kev_queue_empty();
 	if (!empty && !link_call_resumed(call)) {
 		for (i = 0; i < DEVBUS_MAX_SETTLES; i++) {
 			if (settles[i].conn)
 				continue;
 			if (link_call_park(call, &settles[i].tok))
 				break;
 			settles[i].conn     = link_call_connection(call);
 			settles[i].deadline = kev_now_ms() + (uint64_t)timeout * 1000;
 			settle_arm(settles[i].deadline);
 			return 0;
 		}
 		/* no room to wait: answer with the state as it stands */
 	}
 	w = link_call_reply(call);
 	link_w_bool(w, empty);
 	return 0;
 }
 static int device1_trigger(link_call_t *call, void *u)
 {
 	const char *action, *glob;
 	(void)u;
 	if (link_call_read_string(call, &action) < 0 ||
 	    link_call_read_string(call, &glob) < 0)
 		return link_call_reply_error(call,
 			"org.freedesktop.DBus.Error.InvalidArgs",
 			"expected (s, s)");
 	if (bus_passive)
 		return link_call_reply_error(call,
 			"org.finit.Error.Failed",
 			"keventd is passive, device events are not handled here");
 	if (*action && !uevent_action_valid(action))
 		return link_call_reply_error(call,
 			"org.freedesktop.DBus.Error.InvalidArgs",
 			"unknown uevent action");
 	if (coldplug_trigger(action, glob))
 		return link_call_reply_error(call,
 			"org.finit.Error.Failed", "trigger failed");
 	(void)link_call_reply(call);
 	return 0;
 }
 static int device1_info(link_call_t *call, void *u)
 {
 	struct uevent ev;
 	const char *devpath;
 	link_writer_t *w;
 	int i;
 	(void)u;
 	if (link_call_read_string(call, &devpath) < 0 || *devpath != '/')
 		return link_call_reply_error(call,
 			"org.freedesktop.DBus.Error.InvalidArgs",
 			"expected (s), an absolute devpath");
 	memset(&ev, 0, sizeof(ev));
 	if (udevdb_read_devpath(devpath, &ev)) {
 		uevent_env_free(&ev);
 		return link_call_reply_error(call,
 			"org.finit.Error.NoSuchDevice",
 			"no database record for devpath");
 	}
 	w = link_call_reply(call);
 	link_w_array_begin(w, '{');
 	for (i = 0; i < ev.nenv; i++) {
 		link_w_struct_begin(w);
 		link_w_string(w, ev.env_key[i]);
 		link_w_string(w, ev.env_val[i]);
 		link_w_struct_end(w);
 	}
 	link_w_array_end(w);
 	uevent_env_free(&ev);
 	return 0;
 }
 static int device1_rules_reload(link_call_t *call, void *u)
 {
 	link_writer_t *w;
 	(void)u;
 	if (bus_passive)
 		return link_call_reply_error(call,
 			"org.finit.Error.Failed",
 			"keventd is passive, rules are not applied here");
 	w = link_call_reply(call);
 	link_w_u32(w, (uint32_t)kev_rules_reload());
 	return 0;
 }
 static int prop_queue_empty(link_writer_t *w, void *u)
 {
 	(void)u;
 	link_w_bool(w, kev_queue_empty());
 	return 0;
 }
 static int prop_seqnum(link_writer_t *w, void *u)
 {
 	(void)u;
 	link_w_u64(w, kev_seq_processed());
 	return 0;
 }
 static const link_method_t device_methods[] = {
 	{ .name = "Settle",      .in_sig = "u",  .out_sig = "b",
 	  .handler = device1_settle },
 	{ .name = "Trigger",     .in_sig = "ss", .out_sig = "",
 	  .flags = LINK_METHOD_PRIVILEGED, .handler = device1_trigger },
 	{ .name = "Info",        .in_sig = "s",  .out_sig = "a{ss}",
 	  .handler = device1_info },
 	{ .name = "RulesReload", .in_sig = "",   .out_sig = "u",
 	  .flags = LINK_METHOD_PRIVILEGED, .handler = device1_rules_reload },
 	{ NULL, NULL, NULL, 0, NULL }
 };
 static const link_property_t device_properties[] = {
 	{ .name = "QueueEmpty",      .sig = "b", .getter = prop_queue_empty },
 	{ .name = "SeqnumProcessed", .sig = "t", .getter = prop_seqnum },
 	{ NULL, NULL, NULL }
 };
 static const link_signal_t device_signals[] = {
 	{ .name = "DeviceProcessed", .sig = "ss" },
 	{ NULL, NULL }
 };
 static const link_vtable_t device_vtable = {
 	.interface  = DEVBUS_INTERFACE,
 	.methods    = device_methods,
 	.properties = device_properties,
 	.signals    = device_signals,
 };
 /* ---------- signal emission + settle nudge ---------- */
 static void devbus_emit_signal(const char *member, const char *sig,
 			       const uint8_t *body, size_t len)
 {
 	struct peer *p, *tmp;
 	TAILQ_FOREACH_SAFE(p, &peers, link, tmp) {
 		if (link_connection_emit_signal(p->conn, DEVBUS_PATH_OBJECT,
 						DEVBUS_INTERFACE, member,
 						sig, body, len) >= 0)
 			continue;
 		if (errno == EMSGSIZE || errno == EINVAL)
 			break;	/* nothing on the wire, same for all */
 		peer_drop(p);
 	}
 }
 void devbus_notify(const char *devpath, const char *action)
 {
 	uint8_t body[512];
 	link_writer_t w;
 	ssize_t blen;
 	if (!server)
 		return;
 	/* A processed event may have been the last one in flight */
 	if (settle_armed)
 		settle_sweep(NULL, NULL, 0);
 	if (TAILQ_EMPTY(&peers) || !devpath)
 		return;
 	link_writer_init(&w, body, sizeof(body));
 	link_w_string(&w, devpath);
 	link_w_string(&w, action ?: "");
 	blen = link_writer_finish(&w);
 	if (blen < 0)
 		return;
 	devbus_emit_signal("DeviceProcessed", "ss", body, (size_t)blen);
 }
 /* ---------- init / exit / settle client ---------- */
 int devbus_init(uev_ctx_t *ctx, int passive)
 {
 	devbus_ctx  = ctx;
 	bus_passive = passive;
 	link_set_logger(link_log_cb, NULL);
 	if (mkpath(DEVBUS_DIR, 0755) && errno != EEXIST) {
 		logit(LOG_ERR, "Failed creating %s: %s", DEVBUS_DIR,
 		      strerror(errno));
 		return -1;
 	}
 	if (link_server_new(&server, DEVBUS_SOCKET, 0660) < 0) {
 		logit(LOG_ERR, "Failed creating D-Bus socket %s: %s",
 		      DEVBUS_SOCKET, strerror(errno));
 		return -1;
 	}
 	/* Resolve the owning group once, see caller_is_privileged() */
 	privileged_gid = getgroup(DEFGROUP);
 	if (chown(DEVBUS_SOCKET, geteuid(), privileged_gid))
 		logit(LOG_WARNING, "Failed setting group %s on %s: %s",
 		      DEFGROUP, DEVBUS_SOCKET, strerror(errno));
 	link_server_set_authorizer(server, caller_is_privileged, NULL);
 	if (link_server_add_object(server, DEVBUS_PATH_OBJECT,
 				   &device_vtable, NULL) < 0) {
 		logit(LOG_ERR, "Failed registering %s", DEVBUS_INTERFACE);
 		link_server_free(server);
 		server = NULL;
 		return -1;
 	}
 	uev_timer_init(ctx, &reap_timer, peer_reap, NULL, 0, 0);
 	if (uev_io_init(ctx, &accept_watcher, accept_cb, NULL,
 			link_server_get_fd(server), UEV_READ)) {
 		logit(LOG_ERR, "Failed watching D-Bus socket");
 		link_server_free(server);
 		server = NULL;
 		return -1;
 	}
 	logit(LOG_NOTICE, "Serving %s on %s", DEVBUS_INTERFACE, DEVBUS_SOCKET);
 	return 0;
 }
 void devbus_exit(void)
 {
 	struct peer *p;
 	if (!server)
 		return;
 	while ((p = TAILQ_FIRST(&peers)))
 		peer_drop(p);
 	peer_reap(NULL, NULL, 0);
 	uev_io_stop(&accept_watcher);
 	link_server_free(server);
 	server = NULL;
 }
 /*
 * Client side of Settle, for `keventd -S`: ask the running keventd.
 * Returns 0 settled, 1 timeout, -1 when no bus answers (fall back to
 * polling the kernel seqnum).
 */
 int devbus_client_settle(int timeout_s)
 {
 	link_client_t *c;
 	link_reader_t r;
 	const link_reply_t *reply;
 	int rc, settled = 0;
 	c = link_client_open(DEVBUS_SOCKET);
 	if (!c)
 		return -1;
 	rc = link_client_call_v(c, DEVBUS_PATH_OBJECT, DEVBUS_INTERFACE,
 				"Settle", "u", (uint32_t)timeout_s);
 	if (rc != LINK_CALL_OK) {
 		link_client_close(c);
 		return -1;
 	}
 	reply = link_client_reply(c);
 	if (reply && reply->body) {
 		link_reader_init(&r, reply->body, reply->body_len);
 		link_r_bool(&r, &settled);
 	}
 	link_client_close(c);
 	return settled ? 0 : 1;
 }
 #endif /* HAVE_DBUS */
--- a/Show More
+++ b/Show More