wt/finit
1
0
Fork 0
mirror of https://github.com/troglobit/finit.git synced 2026-10-01 05:22:48 +07:00
Code Issues Packages Projects Releases Wiki Activity
Files
cgroup-config
finit/README.md
T
Joachim Nilsson d7da177742 Relocate images to img/ 
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
2019-01-27 10:56:39 +01:00

546 lines
22 KiB
Markdown
Raw Permalink Blame History

<img align="right" src="img/finit3.png" alt="Finit: Fast Init">
* [Introduction](#introduction)
* [Features](#features)
* [Bootstrap](docs/bootstrap.md#bootstrap)
* [Runlevels](#runlevels)
* [Syntax](docs/config.md#syntax)
* [Inetd](docs/inetd.md#inetd)
* [Runparts & /etc/rc.local](#runparts--etcrclocal)
* [Hooks, Callbacks & Plugins](docs/plugins.md#hooks-callbacks--plugins)
* [Rebooting & Halting](#rebooting--halting)
* [Commands & Status](#commands--status)
* [Tips & Tricks with the kernel cmdline](docs/cmdline.md)
* [Building](docs/build.md#building)
* [Running](docs/build.md#running)
* [Recovery](docs/build.md#recovery)
* [Debugging](docs/build.md#debugging)
* [Requirements](#requirements)
* [Origin & References](#origin--references)
Introduction
------------
[![License Badge][]][License] [![Travis Status]][Travis] [![Coverity Status]][Coverity Scan]
Finit is a simple alternative to [SysV init][4] and [systemd][6]. It
was reverse engineered from the [EeePC fastinit][] ten years ago by
[Claudio Matsuoka][] — "gaps filled with frog DNA …"
Focus is on small and embedded systems, although Finit is fully usable
on server and desktop systems as well. For working examples, see the
[contrib/](contrib/) section with tutorials for:
* [Alpine Linux](contrib/alpine/),
* [Debian GNU/Linux](contrib/debian/), and
* [Void Linux](contrib/void/)
![Alpine screenshot](img/alpine-screenshot.png)
The screenshot shows [Alpine Linux](https://www.alpinelinux.org/).
Example
-------
This example `/etc/finit.conf` can also be split up in multiple `.conf`
files in `/etc/finit.d`. Available, but not yet enabled, services can
be placed in `/etc/finit.d/available` and enabled by an operator using
the [initctl](#commands--status) tool.
```ApacheConf
# Fallback if /etc/hostname is missing
host default
# Runlevel to start after bootstrap, 'S', default: 2
runlevel 2
# Max file size for each log file: 100 kiB, rotate max 4 copies:
# log => log.1 => log.2.gz => log.3.gz => log.4.gz
log size=100k count=4
# Services to be monitored and respawned as needed
service [S12345] /sbin/watchdogd -L -f -- System watchdog daemon
service [S12345] /sbin/syslogd -n -b 3 -D -- System log daemon
service [S12345] /sbin/klogd -n -- Kernel log daemon
service [2345] /sbin/lldpd -d -c -M1 -H0 -i -- LLDP daemon (IEEE 802.1ab)
# The BusyBox ntpd does not use syslog when running in the foreground
# So we use this trick to redirect stdout/stderr to a log file. The
# log file is rotated with the above settings. The condition declares
# a dependency on a system default route (gateway) to be set. A single
# <!> at the beginning means ntpd does not respect SIGHUP for restart.
service [2345] log:/var/log/ntpd.log <!net/route/default> /sbin/ntpd -n -l -I eth0 -- NTP daemon
# For multiple instances of the same service, add :ID somewhere between
# the service/run/task keyword and the command.
service :1 [2345] /sbin/merecat -n -p 80 /var/www -- Web server
service :2 [2345] /sbin/merecat -n -p 8080 /var/www -- Old web server
# Alternative method instead of below runparts, can also use /etc/rc.local
#task [S] /etc/init.d/keyboard-setup start -- Setting up preliminary keymap
#task [S] /etc/init.d/acpid start -- Starting ACPI Daemon
#task [S] /etc/init.d/kbd start -- Preparing console
# Inetd services to start on demand, with alternate ports and filtering
inetd ftp/tcp nowait [2345] /sbin/in.ftpd -- FTP daemon
inetd tftp/udp wait [2345] /sbin/in.tftpd -- TFTP daemon
inetd time/udp wait [2345] internal -- UNIX rdate service
inetd time/tcp nowait [2345] internal -- UNIX rdate service
inetd 3737/tcp nowait [2345] internal.time -- UNIX rdate service
inetd telnet/tcp nowait [2345] /sbin/telnetd -i -F -- Telnet daemon
inetd 2323/tcp nowait [2345] /sbin/telnetd -i -F -- Telnet daemon
inetd 222/tcp@eth0 nowait [2345] /sbin/dropbear -i -R -F -- SSH service
inetd ssh/tcp@*,!eth0 nowait [2345] /sbin/dropbear -i -R -F -- SSH service
# Run start scripts from this directory
# runparts /etc/start.d
# Virtual consoles run BusyBox getty
tty [12345] /sbin/getty -L 115200 /dev/tty1 linux
tty [12345] /sbin/getty -L 115200 /dev/tty2 linux
tty [12345] /sbin/getty -L 115200 /dev/tty3 linux
# Use built-in getty for serial port and USB serial
tty [12345] /dev/ttyAMA0 115200 noclear nowait
tty [12345] /dev/ttyUSB0 115200 noclear
# Just give me a shell, I need to debug this embedded system!
tty [12345] @console noclear nologin
```
The `service` stanza, as well as `task`, `run`, `inetd` and others are
described in full in [docs/config.md](docs/config.md). Here's a quick
overview of some of the most common components needed to start a UNIX
daemon:
```
service [LVLS] <COND> /path/to/daemon ARGS -- Some text
^ ^ ^ ^ ^ ^
| | | | | `-- Optional description
| | | | `---------- Daemon arguments
| | | `-------------------------- Path to daemon
| | `--------------------------------- Optional conditions
| `---------------------------------------- Optional Runlevels
`------------------------------------------------ Monitored application
```
Some components are optional: runlevel(s), condition(s) and description,
making it easy to create simple start scripts and still possible for more
advanced uses as well:
service /usr/sbin/sshd -D
Dependencies are handled using [conditions](docs/conditions.md). One of
the most common conditions is to wait for basic networking to become
available:
service <net/route/default> /usr/sbin/nginx -- High performace HTTP server
Here is another example where we instruct Finit to not start BusyBox
`ntpd` until `syslogd` has started properly. Finit waits for `syslogd`
to create its PID file, by default `/var/run/syslogd.pid`.
service [2345] log <svc/sbin/syslogd> /usr/sbin/ntpd -n -N -p pool.ntp.org
service [S12345] /sbin/syslogd -n -- Syslog daemon
Notice the `log` keyword, BusyBox `ntpd` uses `stderr` for logging when
run in the foreground. With `log` Finit redirects `stdout` + `stderr`
to the system log daemon using the command line `logger(1)` tool.
A service, or task, can have multiple dependencies listed. Here we wait
for *both* `syslogd` to have started and basic networking to be up:
service [2345] log <svc/sbin/syslogd,net/route/default> /usr/sbin/ntpd -n -N -p pool.ntp.org
If either condition fails, e.g. loss of networking, `ntpd` is stopped
and as soon as it comes back up again `ntpd` is restarted automatically.
**Note:** Make sure daemons *do not* fork and detach themselves from the
controlling TTY, usually an `-n` or `-f` flag, or `-D` as in the case
of OpenSSH above. If it detaches itself, Finit cannot monitor it and
will instead try to restart it.
Features
--------
**Process Supervision**
Start, monitor and restart services should they fail.
**Inetd**
Finit comes with a built-in [inetd server](docs/inetd.md). No need to
maintain a separate config file for services that you want to start on
demand.
All inetd services started can be filtered per port and inbound
interface, reducing the need for a full blown firewall.
Built-in optional inetd services:
- echo [RFC862][]
- chargen [RFC864][]
- daytime [RFC867][]
- discard [RFC863][]
- time (rdate) [RFC868][]
For more information, see [docs/inetd.md](docs/inetd.md).
**Getty**
Finit supports external getty but also comes with a limited built-in
Getty, useful for really small systems. A getty sets up the TTY and
waits for user input before handing over to `/bin/login`, which is
responsible for handling the actual authentication.
```conf
tty [12345] /dev/tty1 38400 nowait linux
tty [12345] /dev/ttyAMA0 115200 noclear vt100
tty [12345] /sbin/getty -L 115200 /dev/ttyAMA0 vt100
```
Users of embedded systems may want to enable automatic serial console
with the special `@console` device. This works regardless weather the
system uses `ttyS0`, `ttyAMA0`, `ttyMXC0`, or anything else. Finit
figures it out by querying sysfs: `/sys/class/tty/console/active`.
```conf
tty [12345] @console 115200 linux noclear
```
Notice the optional `noclear`, `nowait`, and `nologin` flags. The
latter is for skipping the login process entirely. For more information,
see [docs/config.md](docs/config.md#syntax).
**Runlevels**
Support for SysV init-style [runlevels][5] is available, in the same
minimal style as everything else in Finit. The `[2345]` syntax can be
applied to service, task, run, inetd, and TTY stanzas.
Reserved runlevels are 0 and 6, halt and reboot, respectively just like
SysV init. Runlevel 1 can be configured freely, but is recommended to
be kept as the system single-user runlevel since Finit will not start
networking here. The configured `runlevel NUM` from `/etc/finit.conf`
is what Finit changes to after bootstrap, unless 'single' (or 'S') is
given on the kernel cmdline, in which case runlevel 1 is started.
All services in runlevel S(0) are started first, followed by the desired
run-time runlevel. Run tasks in runlevel S can be started in sequence
by using `run [S] cmd`. Changing runlevels at runtime is done like any
other init, e.g. <kbd>init 4</kbd>, but also using the more advanced
`intictl` tool.
**Plugins**
Plugins can *extend* the functionality of Finit and *hook into* the
different stages of the boot process and at runtime. Plugins are
written in C and compiled into a dynamic library loaded automatically by
finit at boot. A basic set of plugins are bundled in the `plugins/`
directory.
Capabilities:
- **Hooks**
Hook into the boot at predefined points to extend Finit
- **I/O**
Listen to external events and control Finit behavior/services
- **Inetd**
Extend Finit with internal inetd services, for an example, see
`plugins/time.c`
Extensions and functionality not purely related to what an `/sbin/init`
needs to start a system are available as a set of plugins that either
hook into the boot process or respond to various I/O.
For more information, see [docs/plugins.md](docs/plugins.md).
**Progress**
Finit prior to v3.0 showed the progress at boot: plugins and modules
being loaded, run/tasks/services being started, etc. By default Finit
is now silent, but progress can still be enabled at build-time using:
configure --enable-progress
or at boot from the kernel cmdline using the boot parameter `splash`:
```shell
append="init=/sbin/finit splash"
```
For a really nice boot, add `quiet` as well. This silences the output
from the kernel, leaving only warnings and errors. For other kernel
command line parameters, see [docs/build.md](docs/build.md#recovery).
Runparts & /etc/rc.local
------------------------
At the end of the boot, when all bootstrap (`S`) tasks and services have
started, but not networking, Finit calls its built-in [run-parts(8)][]
command on any configured `runparts <DIR>` directory. This happens just
before changing to the configured runlevel (default 2). (Networking is
enabled just prior to changing from single user mode.)
```shell
runparts /etc/rc.d/
```
Right after the runlevel change when all services have started properly,
`/etc/rc.local` is called.
No configuration stanza in `/etc/finit.conf` is required for `rc.local`.
If it exists and is an executable shell script Finit calls it at the very
end of the boot, before calling the `HOOK_SYSTEM_UP`. See more on hooks
in [docs/plugins.md](docs/plugins.md#hooks), and about the system bootstrap
in [docs/bootstrap.md](docs/bootstrap.md).
Runlevels
---------
Basic support for [runlevels][5] is included in Finit from v1.8. By
default all services, tasks, run commands and TTYs listed without a set
of runlevels get a default set `[234]` assigned. The default runlevel
after boot is 2.
Finit supports runlevels 0-9, and S, with 0 reserved for halt, 6 reboot
and S for services to only run at bootstrap. Runlevel 1 is the single
user level, where usually no networking is enabled. In Finit this is
more of a policy for the user to define. Normally only runlevels 1-6
are used, and even more commonly, only the default runlevel is used.
To specify an allowed set of runlevels for a `service`, `run` command,
`task`, or `tty`, add `[NNN]` to your `/etc/finit.conf`, like this:
```
service [S12345] /sbin/syslogd -n -x -- System log daemon
run [S] /etc/init.d/acpid start -- Starting ACPI Daemon
task [S] /etc/init.d/kbd start -- Preparing console
service [S12345] /sbin/klogd -n -x -- Kernel log daemon
tty [12345] /dev/tty1
tty [2] /dev/tty2
tty [2] /dev/tty3
tty [2] /dev/tty4
tty [2] /dev/tty5
tty [2] /dev/tty6
```
In this example syslogd is first started, in parallel, and then acpid is
called using a conventional SysV init script. It is called with the run
command, meaning the following task command to start the kbd script is
not called until the acpid init script has fully completed. Then the
keyboard setup script is called in parallel with klogd as a monitored
service.
Again, tasks and services are started in parallel, while run commands
are called in the order listed and subsequent commands are not started
until a run command has completed. Also, task and run commands are run
in a shell, so pipes and redirects can be used.
The following examples illustrate this. Bootstrap task and run commands
are also removed when they have completed, `initctl show` will not list
them.
```
task [S] echo "foo" | cat >/tmp/bar
run [S] echo "$HOME" >/tmp/secret
```
Switching between runlevels can be done by calling init with a single
argument, e.g. <kbd>init 5</kbd>, or using `initctl runlevel 5`, both
switch to runlevel 5. When changing runlevels Finit also automatically
reloads all `.conf` files in the `/etc/finit.d/` directory. So if you
want to set a new system config, switch to runlevel 1, change all config
files in the system, and touch all `.conf` files in `/etc/finit.d`
before switching back to the previous runlevel again — that way Finit
can both stop old services and start any new ones for you, without
rebooting the system.
Rebooting & Halting
-------------------
Traditionally, rebooting and halting a UNIX system is done by changing
its runlevel. Finit comes with its own tooling providing: `shutdown`,
`reboot`, `poweroff`, and `suspend`, but also the traditional `init` and
`telinit`, as well as a more modern `initctl` tool, detailed in the next
section.
For compatibility reasons Finit listens to the same set of signals as
BusyBox init. This is not 100% compatible with SysV init, but clearly
the more common combination for Finit. For more details, see
[docs/signals.md](docs/signals.md).
Finit also listens to the classic SysV init FIFO, used by `telinit`.
Support for this is implemented by the `initctl.so` plugin. Hence,
`telinit q` will work as the UNIX beards intended.
```shell
~ # telinit -h
Usage: telinit [OPTIONS] [q | Q | 0-9]
Options:
-h, --help This help text
-V, --version Show Finit version
Commands:
0 Power-off the system, same as initctl poweroff
6 Reboot the system, same as initctl reboot
2, 3, 4, 5 Change runlevel. Starts services in new runlevel, stops any
services in prev. runlevel that are not allowed in new.
q, Q Reload *.conf in /etc/finit.d/, same as initctl reload or
sending SIGHUP to PID 1
1, s, S Enter system rescue mode, runlevel 1
```
Commands & Status
-----------------
Finit also implements a more modern API to query status, and start/stop
services, called `initctl`. Unlike `telinit` the `initctl` tool does
not return until the given command has fully completed.
```shell
~ $ initctl -h
Usage: initctl [OPTIONS] [COMMAND]
Options:
-v, --verbose Verbose output
-h, --help This help text
Commands:
debug Toggle Finit (daemon) debug
help This help text
version Show Finit version
list List all .conf in /etc/finit.d/
enable <CONF> Enable .conf in /etc/finit.d/available/
disable <CONF> Disable .conf in /etc/finit.d/[enabled/]
touch <CONF> Mark .conf in /etc/finit.d/ for reload
reload Reload *.conf in /etc/finit.d/ (activates changes)
cond set <COND> Set (assert) condition => +COND
cond clear <COND> Clear (deassert) condition => -COND
cond show Show condition status
cond dump Dump all conditions and their status
log [NAME] Show ten last Finit, or NAME, messages from syslog
start <JOB|NAME>[:ID] Start service by job# or name, with optional ID
stop <JOB|NAME>[:ID] Stop/Pause a running service by job# or name
restart <JOB|NAME>[:ID] Restart (stop/start) service by job# or name
status <JOB|NAME>[:ID] Show service status, by job# or name
status | show Show status of services, default command
runlevel [0-9] Show or set runlevel: 0 halt, 6 reboot
reboot Reboot system
halt Halt system
poweroff Halt and power off system
utmp show Raw dump of UTMP/WTMP db
```
For services *not* supporting `SIGHUP` the `<!>` notation in the .conf
file must be used to tell Finit to stop and start it on `reload` and
`runlevel` changes. If `<>` holds more [conditions](docs/conditions.md),
these will also affect how a service is maintained.
**Note:** even though it is possible to start services not belonging in
the current runlevel these services will not be respawned automatically
by Finit if they exit (crash). Hence, if the runlevel is 2, the below
Dropbear SSH service will not be restarted if it is killed or exits.
```shell
~ $ initctl status -v
1 running 476 [S12345] /sbin/watchdog -T 16 -t 2 -F /dev/watchdog
2 running 477 [S12345] /sbin/syslogd -n -b 3 -D
3 running 478 [S12345] /sbin/klogd -n
4:1 inetd 0 [2345] internal time allow *:37,!eth0
4:2 inetd 0 [2345] internal time allow eth0:3737
5:1 inetd 0 [2345] /sbin/telnetd allow *:23 deny eth0,eth1
5:2 inetd 0 [2345] /sbin/telnetd allow eth0:2323,eth2:2323,eth1:2323
6:1 inetd 0 [345] /sbin/dropbear allow eth0:222
6:2 inetd 0 [345] /sbin/dropbear allow *:22 deny eth0
```
Requirements
------------
Finit is capable of running on both desktop/server systems with udev and
embedded systems that usually come with BusyBox mdev. Some systems have
systemd-udev or eudev today instead of the original udev, Finit probes
for all of them at runtime and expects `/dev/` to be a writable file
system using `devtmpfs`. It is also possible to run on a statically set
up `/dev` if needed. It is however not a good idea to have both udev
and mdev installed at the same time, this will lead to unpredictable
results.
At boot Finit calls either `mdev` or `udevd` to populate `/dev`, this is
done slightly differently and on systems with udev you might want to add
the following one-shot task early in your `/etc/finit.conf`:
```conf
run [S] /sbin/udevadm settle --timeout=120 -- Waiting for udev
```
Finit has a built-in Getty for TTYs, but requires a working `/bin/login`
or `/bin/sh`, if no TTYs are configured in `/etc/finit.conf`.
For a fully operational system `/var`, `/run` and `/tmp` must be set up
properly in `/etc/fstab` -- which is iterated over at boot.
The built-in Inetd requires `/etc/services` and `/etc/protocols` to work
with port names rather than numbers.
Origin & References
-------------------
This project is based on the [original finit][] by [Claudio Matsuoka][]
which was reverse engineered from syscalls of the [EeePC fastinit][] —
"gaps filled with frog DNA …"
Finit is developed and maintained by [Joachim Nilsson][] at [GitHub][].
Please file bug reports, clone it, or send pull requests for bug fixes
and proposed extensions.
[1]: https://en.wikipedia.org/wiki/Process_supervision
[2]: http://cr.yp.to/daemontools.html
[3]: http://smarden.org/runit/
[4]: http://en.wikipedia.org/wiki/Init
[5]: http://en.wikipedia.org/wiki/Runlevel
[6]: https://www.freedesktop.org/wiki/Software/systemd/
[9]: https://github.com/troglobit/troglos
[RFC862]: https://tools.ietf.org/html/rfc862
[RFC863]: https://tools.ietf.org/html/rfc863
[RFC864]: https://tools.ietf.org/html/rfc864
[RFC867]: https://tools.ietf.org/html/rfc867
[RFC868]: https://tools.ietf.org/html/rfc868
[init]: http://en.wikipedia.org/wiki/Init
[upstart]: http://upstart.ubuntu.com/
[systemd]: http://www.freedesktop.org/wiki/Software/systemd/
[openrc]: http://www.gentoo.org/proj/en/base/openrc/
[run-parts(8)]: http://manpages.debian.org/cgi-bin/man.cgi?query=run-parts
[original finit]: http://helllabs.org/finit/
[EeePC fastinit]: http://wiki.eeeuser.com/boot_process:the_boot_process
[Claudio Matsuoka]: https://github.com/cmatsuoka
[Joachim Nilsson]: http://troglobit.com
[GitHub]: https://github.com/troglobit/finit
[License]: https://en.wikipedia.org/wiki/MIT_License
[License Badge]: https://img.shields.io/badge/License-MIT-yellow.svg
[Travis]: https://travis-ci.org/troglobit/finit
[Travis Status]: https://travis-ci.org/troglobit/finit.png?branch=master
[Coverity Scan]: https://scan.coverity.com/projects/3545
[Coverity Status]: https://scan.coverity.com/projects/3545/badge.svg
Reference in New Issue View Git Blame Copy Permalink