finit/doc/config.md

Configuration
=============

* [Introduction](#introduction)
* [Syntax](#syntax)
* [Limitations](#limitations)
  * [/etc/finit.conf](#etcfinitconf)
  * [/etc/finit.d](#etcfinitd)


Introduction
------------

Finit can be configured using only the original `/etc/finit.conf` file
or in combination with `/etc/finit.d/*.conf`.  Finit 3 can even start a
system using only `/etc/finit.d/*.conf`, highly useful for package-based
Linux distributions -- each package can provide its own "script" file.

- `/etc/finit.conf`: main configuration file, read only once at boot
- `/etc/finit.d/*.conf`: snippets, usually one service per file

Not all configuration directives are available in `/etc/finit.d/*.conf`
and some directives are only available at bootstrap, runlevel `S`, see
the section [Limitations](#limitations) below for details.

To add a new service, simply drop a `.conf` file in `/etc/finit.d` and
run `initctl reload`.  (It is also possible to `SIGHUP` to PID 1, or
call `finit q`, but that has been deprecated with the `initctl` tool).
Any service read from this directory is flagged as a dynamic service, so
changes to or removal of `/etc/finit.d/*.conf` files, is detected.

On `initctl reload` the following is checked for all services:

- If a service's `.conf` file has been removed, or its conditions are no
  longer satisifed, the service is stopped.
- If the file is modified, or a service it depends on has been reloaded,
  the service is reloaded (stopped and started).
- If a new service is added it is automatically started — respecting
  runlevels and return values from any callbacks.

For more info on the different states of a service, see the separate
document [Finit Services](service.md).


Syntax
------

* `module <MODULE>`  
  Load a kernel module, with optional arguments

* `network <PATH>`  
  Script or program to bring up networking, with optional arguments

* `rlimit <hard|soft> RESOURCE <LIMIT|unlimited>`  
  Set the hard or soft limit for a resource.  `RESOURCE` is a lower-case
  string matching the `RLIMIT_` constants from `setrlimit(2)`, without
  the prefix.  E.g. to set `RLIMIT_CPU`, use `cpu`.
  
  The limit is an integer that depends on the resource being modified,
  see the man page, or the kernel `/proc/PID/limits` file, for more
  information.  Finit versions before v3.1 used `infinity` for
  `unlimited`, which is still a supported keyword.

```shell
        # No process is allowed more than 8MB of address space
        rlimit hard as 8388608

        # Core dumps may be arbitrarily large
        rlimit soft core infinity
```

* `runlevel <N>`  
  N is the runlevel number 1-9, where 6 is reserved for reboot.  
  Default is 2.

* `run [LVLS] <COND> /path/to/cmd ARGS -- Optional description`  
  One-shot command to run in sequence when entering a runlevel, with
  optional arguments and description.
  
  `run` commands are guaranteed to be completed before running the next
  command.  Highly useful if true serialization is needed.

* `task [LVLS] <COND> /path/to/cmd ARGS -- Optional description`  
  One-shot like 'run', but starts in parallel with the next command.
  
  Both `run` and `task` commands are run in a shell, so pipes and
  redirects can be freely used:

```shell
        task [s] echo "foo" | cat >/tmp/bar
```

* `service [LVLS] <COND> /path/to/daemon ARGS -- Optional description`  
  Service, or daemon, to be monitored and automatically restarted if it
  exits prematurely.  Please note that you often need to provide a
  `--foreground` or `--no-background` argument to most daemons to
  prevent them from forking off a sub-process in the background.

```shell
        service [2345] <svc/sbin/zebra> /sbin/ospfd -- OSPF daemon
```

  The `[2345]` is the runlevels `ospfd` is allowed to run in, they are
  optional and default to level 2-5 if left out.
  
  The `<...>` is the condition for starting `ospfd`.  In this example
  Finit waits for another service, `/sbin/zebra`, to have created its
  PID file in `/var/run/zebra.pid` before starting `ospfd`.

  For a detailed description of conditions, and how to debug them,
  see the [Finit Conditions](conditions.md) document.

* `inetd service/proto[@iflist] <wait|nowait> [LVLS] /path/to/daemon args`  
  Launch a daemon when a client initiates a connection on an Internet
  port.  Available services are listed in the UNIX `/etc/services` file.
  Finit can filter access to from a list of interfaces, `@iflist`, per
  inetd service as well as listen to custom ports.

```shell
        inetd ftp/tcp	nowait	@root	/usr/sbin/uftpd -i -f
        inetd tftp/udp	wait	@root	/usr/sbin/uftpd -i -t
```

  The following example listens to port 2323 for telnet connections and
  only allows clients connecting from `eth0`:

```shell
        inetd 2323/tcp@eth0 nowait [2345] /sbin/telnetd -i -F
```

  The interface list, `@iflist`, is of the format `@iface,!iface,iface`,
  where a single `!` means to deny access.  Notice how interfaces are
  comma separated with no spaces.

  The `inetd` directive can also have ` -- Optional Description`, only
  Finit does not output this text on the console when launching inetd
  services.  Instead this text is sent to syslog and also shown by the
  `initctl` tool.  More on inetd below.

* `runparts <DIR>`  
  Call [run-parts(8)][] on `DIR` to run start scripts.  All executable
  files, or scripts, in the directory are called, in alphabetic order.

  It can be beneficial to use `S01name`, `S02othername`, etc. if there
  is a dependency order between the scripts.  Symlinks to existing
  daemons can talso be used, but make sure they daemonize by default.

  As the optional `/etc/rc.local` shell script, make sure that all your
  services and programs either terminate or start in the background or
  you will block Finit.

* `include <CONF>`  
  Include another configuration file.  Absolute path required.

* `tty [LVLS] <DEV> [BAUD] [noclear] [nowait] [TERM]`  
  `tty [LVLS] <CMD> <ARGS> [noclear] [nowait]`  
  The first variant of this option uses the built-in getty on the given
  TTY device DEV, in the given runlevels.  Default baud rate is `38400`.

  **Example:**
```conf
        tty [12345] /dev/ttyAMA0 115200 noclear vt220
```

  The second `tty` syntax variant is for using an external getty, like
  agetty or the BusyBox getty.
    
  By default both variants *clear* the TTY and *wait* for the user to
  press enter before starting getty.

  **Example:**
```conf
        tty [12345] /sbin/getty  -L 115200 /dev/ttyAMA0 vt100
        tty [12345] /sbin/agetty -L ttyAMA0 115200 vt100 nowait
```

  The `noclear` option disables clearing the TTY after each session.
  Clearing the TTY when a user logs out is usually preferable.
  
  The `nowait` option disables the `press Enter to activate console`
  message before actually starting the getty program.  On small and
  embedded systems running multiple unused getty wastes both memory
  and CPU cycles, so `wait` is the preferred default.

  Notice the ordering, the `TERM` option to the built-in getty must be
  the last argument.

  Embedded systems may want to enable automatic `DEV` by supplying the
  special `@console` device.  This works regardless weather the system
  uses `ttyS0`, `ttyAMA0`, `ttyMXC0`, or anything else.  Finit figures
  it out by querying sysfs: `/sys/class/tty/console/active`.

  **Example:**
```conf
        tty [12345] @console 115200 noclear vt220
```

  On really bare bones systems Finit offers a fallback shell, which
  should not be enabled on production systems since.  This because it
  may give a user root access without having to log in.  However, for
  bringup and system debugging it can come in handy:

```shell
        configure --enable-fallback-shell
```

  One can also use the `service` stanza to start a stand-alone shell:

```conf
        service [12345] /bin/sh -l
```

When running <kbd>make install</kbd> no default `/etc/finit.conf` will
be installed since system requirements differ too much.  Try out the
Debian 6.0 example `/usr/share/doc/finit/finit.conf` configuration that
is capable of service monitoring SSH, sysklogd, gdm and getty!

Every `run`, `task`, `service`, or `inetd` can also list the privileges
the `/path/to/cmd` should be executed with.  Simply prefix the path with
`[@USR[:GRP]]` like this:

```shell
    run [2345] @joe:users /usr/bin/logger "Hello world"
```

For multiple instances of the same command, e.g. a DHCP client or
multiple web servers, add `:ID` somewhere between the `run`, `task`,
`service` keyword and the command, like this:

```shell
    service :1 [2345] /sbin/httpd -f -h /http -p 80   -- Web server
    service :2 [2345] /sbin/httpd -f -h /http -p 8080 -- Old web server
```

Without the `:ID` to the service the latter will overwrite the former
and only the old web server would be started and supervised.

The `run`, `task`, `service`, or `inetd` stanzas also allow the keyword
`log` to redirect `stderr` and `stdout` of the application to syslog,
using `logger`.

Worth noting is that conditions is allowed for all these stanzas.  For a
detailed description, see the [Conditions](conditions.md) document.


Limitations
-----------

To understand the limitations of `finit.conf` vs `finit.d` it is useful
to picture the different phases of the system: bootstrap, runtime, and
shutdown.  The `finit.conf` file can be used for all possible settings,
but `finit.d/*.conf` can only be used for runtime settings.

### /etc/finit.conf

This file was the only way to set up and boot a system using Finit.  It
is used for pre-runtime settings like system hostname, network bringup
and shutdown:

- `host`
- `mkdod`
- `network`
- `runparts`
- `include`
- `shtudown`
- `runlevel`
- ... and all configuration stanzas from `/etc/finit.d` below

### /etc/finit.d

Support for partial `.conf` files in `/etc/finit.d` was added to handle
changes of the system configuration at runtime.  It does *not support*
the above `finit.conf` settings described above, only the following:

- `module`, but only in runlevel `S`
- `service`
- `task`
- `run`
- `inetd`
- `rlimit`
- `tty`

**NOTE:** The `/etc/finit.d` directory was previously the default Finit
  `runparts` directory.  Finit no longer has a default `runparts`, make
  sure to update your setup, or the finit configuration, accordingly.

[run-parts(8)]: http://manpages.debian.org/cgi-bin/man.cgi?query=run-parts