Fix CI: name the unsigned overload type through template parameters

basic_json used number_unsigned_overload_t<basic_json> while the class was still incomplete. MSVC rejected it as a recursive alias declaration and GCC 4.9, 5 and 7 crashed with an internal compiler error. basic_json now uses number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType>, which also makes the GCC 5 workaround in the patch test unnecessary. Infer reported a null dereference for the number_unsigned case in from_json, which cannot happen for a basic_json whose number_unsigned_t is number_integer_t; assert it. Signed-off-by: Niels Lohmann <mail@nlohmann.me>
✅ skip patch test on GCC 5 to avoid internal compiler error
2026-10-14 10:19:55 +00:00 · 2026-10-14 08:41:58 +02:00 · 2026-10-13 21:18:20 +02:00 · 2026-10-13 18:57:59 +02:00 · 2026-10-13 18:57:07 +02:00 · 2026-10-13 17:17:15 +02:00
37 changed files with 2763 additions and 240 deletions
@@ -610,9 +610,8 @@ foreach(SRC_FILE ${SRC_FILES})
    add_executable(single_${RELATIVE_SRC_FILE} EXCLUDE_FROM_ALL ${PROJECT_BINARY_DIR}/src_single/${RELATIVE_SRC_FILE}.cpp)
    target_include_directories(single_${RELATIVE_SRC_FILE} PRIVATE ${PROJECT_SOURCE_DIR}/include)
    target_compile_features(single_${RELATIVE_SRC_FILE} PRIVATE cxx_std_11)
-    if(RELATIVE_SRC_FILE STREQUAL "json" OR RELATIVE_SRC_FILE STREQUAL "json_literals")
-        # see below: report the diagnostics of json.hpp and json_literals.hpp without --error, so they
-        # do not fail the build
+    if(RELATIVE_SRC_FILE STREQUAL "json")
+        # see below: report the diagnostics of json.hpp without --error, so they do not fail the build
        set_property(TARGET single_${RELATIVE_SRC_FILE} PROPERTY CXX_INCLUDE_WHAT_YOU_USE ${IWYU_TOOL} -Xiwyu --max_line_length=300)
    else()
        set_property(TARGET single_${RELATIVE_SRC_FILE} PROPERTY CXX_INCLUDE_WHAT_YOU_USE "${iwyu_path_and_options}")
@@ -626,18 +625,31 @@ foreach(SRC_FILE ${SRC_FILES})
    # reporting its diagnostics (informational, via CXX_INCLUDE_WHAT_YOU_USE above) but exclude it
    # from the hard gate below so a fresh IWYU/compiler combination does not fail this target on a
    # nondeterministic suggestion for a header that already re-exports everything on purpose.
-    # json_literals.hpp and json.hpp include each other on purpose (json.hpp includes it at its end
-    # unless JSON_NO_AUTOMATIC_UDLS is defined), and IWYU, not following the cycle, suggests replacing
-    # json.hpp with json_fwd.hpp although the literals need the complete basic_json; exclude it, too.
-    if(NOT RELATIVE_SRC_FILE STREQUAL "json" AND NOT RELATIVE_SRC_FILE STREQUAL "json_literals")
+    if(NOT RELATIVE_SRC_FILE STREQUAL "json")
        list(APPEND single_binaries_tus src_single/${RELATIVE_SRC_FILE}.cpp)
    endif()
 endforeach()

+# The checks above look at each header on its own. Client code that includes only <nlohmann/json.hpp>
+# must not be told by include analyzers to include another nlohmann header for what it uses
+# (issue #5812): json.hpp marks those includes "IWYU pragma: export", and both IWYU and clang-tidy's
+# misc-include-cleaner (disabled in .clang-tidy for the library itself) check these clients.
+file(GLOB CONSUMER_FILES ${PROJECT_SOURCE_DIR}/tests/iwyu_consumer/*.cpp)
+foreach(CONSUMER_FILE ${CONSUMER_FILES})
+    get_filename_component(CONSUMER_NAME "${CONSUMER_FILE}" NAME_WE)
+    add_executable(iwyu_consumer_${CONSUMER_NAME} EXCLUDE_FROM_ALL ${CONSUMER_FILE})
+    target_include_directories(iwyu_consumer_${CONSUMER_NAME} PRIVATE ${PROJECT_SOURCE_DIR}/include)
+    target_compile_features(iwyu_consumer_${CONSUMER_NAME} PRIVATE cxx_std_11)
+    list(APPEND single_binaries iwyu_consumer_${CONSUMER_NAME})
+    list(APPEND single_binaries_tus ${CONSUMER_FILE})
+endforeach()
+
 if(IWYU_TOOL_PY)
    add_custom_target(ci_single_binaries
        DEPENDS ${single_binaries}
        COMMAND ${IWYU_TOOL_PY} -p ${PROJECT_BINARY_DIR} ${single_binaries_tus} -- ${iwyu_options}
+        COMMAND ${CLANG_TIDY_TOOL} -p ${PROJECT_BINARY_DIR} --checks=-*,misc-include-cleaner --warnings-as-errors=* ${CONSUMER_FILES}
+        VERBATIM
        COMMENT "Check if headers are self-contained"
    )
 else()
@@ -59,6 +59,7 @@ Currently, only `remove`, `add`, and `replace` operations are generated.
 - [patch](patch.md) applies a JSON Patch
 - [patch_inplace](patch_inplace.md) applies a JSON Patch in place
 - [merge_patch](merge_patch.md) applies a JSON Merge Patch
+- [merge_diff](merge_diff.md) creates a diff as a JSON Merge Patch

 ## Version history

@@ -285,6 +285,7 @@ Access to the JSON value
 ### JSON Merge Patch functions

 - [**merge_patch**](merge_patch.md) - applies a JSON Merge Patch
+- [**merge_diff**](merge_diff.md) (_static_) - creates a diff as a JSON Merge Patch

 ## Static functions

@@ -6,6 +6,9 @@ constexpr bool is_number_unsigned() const noexcept;

 This function returns `#!cpp true` if and only if the JSON value is an unsigned integer number. This excludes
 floating-point and signed integer values.
+
+If [`number_unsigned_t`](number_unsigned_t.md) is the same type as [`number_integer_t`](number_integer_t.md), every
+integer is stored as `number_integer_t`, and this function always returns `#!cpp false`.
    
 ## Return value

@@ -0,0 +1,79 @@
+# <small>nlohmann::basic_json::</small>merge_diff
+
+```cpp
+static basic_json merge_diff(const basic_json& source,
+                             const basic_json& target);
+```
+
+Creates a [JSON Merge Patch](https://tools.ietf.org/html/rfc7396) so that value `source` can be changed into the value
+`target` by calling the [`merge_patch`](merge_patch.md) function. The patch contains only what differs: changed and
+added members with their new values, and removed members with the value `#!json null`. Nested objects are compared
+member by member; any other value that differs, including an array, is replaced as a whole.
+
+For two JSON values `source` and `target`, where `target` contains no object member whose value is `#!json null`, the
+following code always yields `#!cpp true`:
+```cpp
+basic_json patched = source;
+patched.merge_patch(merge_diff(source, target));
+patched == target;
+```
+
+## Parameters
+
+`source` (in)
+:   JSON value to compare from
+
+`target` (in)
+:   JSON value to compare against
+
+## Return value
+
+a JSON Merge Patch to convert the `source` to `target`
+
+## Exception safety
+
+Strong guarantee: `source` and `target` are never modified.
+
+## Complexity
+
+Linear in the total number of values (including nested ones) in `source` and `target`, times the cost of a key-based
+object operation (looking up a key, or adding one to the patch): logarithmic for [`json`](../json.md), and linear for
+[`ordered_json`](../ordered_json.md) (see [`ordered_map` complexity](../ordered_map.md#complexity)). For
+`ordered_json`, diffing two objects with `n` and `m` members therefore takes O((n+m)²).
+
+## Notes
+
+- A merge patch uses `#!json null` to remove a member, so it cannot set a member to `#!json null`. As in RFC 7396, a
+  `#!json null` member of `target` is treated as absent: the patch removes the member from `source` instead of setting
+  it to `#!json null`. A member that is `#!json null` in both `source` and `target` is unchanged and left out of the
+  patch, so `source` keeps it.
+- A merge patch cannot reorder object members, and [`merge_patch`](merge_patch.md) appends added members at the end.
+  For [`ordered_json`](../ordered_json.md), the patched value therefore has the same members as `target`, but not
+  necessarily in the same order, and may compare unequal to it. The patch lists changed and removed members in the
+  order of `source`, followed by added members in the order of `target`.
+
+## Examples
+
+??? example
+
+    The following code shows how a JSON Merge Patch is created as a diff for two JSON values.
+
+    ```cpp
+    --8<-- "examples/merge_diff.cpp"
+    ```
+
+    Output:
+
+    ```json
+    --8<-- "examples/merge_diff.output"
+    ```
+
+## See also
+
+- [RFC 7396 (JSON Merge Patch)](https://tools.ietf.org/html/rfc7396)
+- [merge_patch](merge_patch.md) applies a JSON Merge Patch
+- [diff](diff.md) creates a diff as a JSON Patch
+
+## Version history
+
+- Added in version 3.13.0.
@@ -67,6 +67,7 @@ returned by `#!cpp (*this)[key]`); it is read as it was when `merge_patch()` was

 - [RFC 7396 (JSON Merge Patch)](https://tools.ietf.org/html/rfc7396)
 - [patch](patch.md) apply a JSON patch
+- [merge_diff](merge_diff.md) creates a diff as a JSON Merge Patch

 ## Version history

@@ -25,7 +25,8 @@ the type to use.
 `NumberUnsignedType`
 :   the type to store unsigned integers. It must be an **unsigned integral** type (`#!cpp std::is_integral`) with a
    `#!cpp std::numeric_limits` specialization, and it must be able to represent the absolute value of every
-    [`number_integer_t`](number_integer_t.md) value. See
+    [`number_integer_t`](number_integer_t.md) value. Alternatively, it can be the same type as
+    [`number_integer_t`](number_integer_t.md); then every integer is stored as `number_integer_t`. See
    [Template Parameter Requirements](../../features/types/template_parameters.md#numberintegertype-and-numberunsignedtype).

 ## Notes
@@ -89,3 +90,4 @@ Integer number values are stored directly inside a `basic_json` type.
 ## Version history

 - Added in version 2.0.0.
+- Can be the same type as `number_integer_t` since version 3.13.0.
@@ -0,0 +1,51 @@
+#include <iostream>
+#include <iomanip>
+#include <nlohmann/json.hpp>
+
+using json = nlohmann::json;
+using namespace nlohmann::literals;
+
+int main()
+{
+    // the source document
+    json source = R"(
+        {
+            "title": "Goodbye!",
+            "author": {
+                "givenName": "John",
+                "familyName": "Doe"
+            },
+            "tags": [
+                "example",
+                "sample"
+            ],
+            "content": "This will be unchanged"
+        }
+    )"_json;
+
+    // the target document
+    json target = R"(
+        {
+            "title": "Hello!",
+            "author": {
+                "givenName": "John"
+            },
+            "tags": [
+                "example"
+            ],
+            "content": "This will be unchanged",
+            "phoneNumber": "+01-123-456-7890"
+        }
+    )"_json;
+
+    // create the patch
+    json patch = json::merge_diff(source, target);
+
+    // roundtrip
+    json patched_source = source;
+    patched_source.merge_patch(patch);
+
+    // output patch and roundtrip result
+    std::cout << std::setw(4) << patch << "\n\n"
+              << std::setw(4) << patched_source << std::endl;
+}
@@ -0,0 +1,22 @@
+{
+    "author": {
+        "familyName": null
+    },
+    "phoneNumber": "+01-123-456-7890",
+    "tags": [
+        "example"
+    ],
+    "title": "Hello!"
+}
+
+{
+    "author": {
+        "givenName": "John"
+    },
+    "content": "This will be unchanged",
+    "phoneNumber": "+01-123-456-7890",
+    "tags": [
+        "example"
+    ],
+    "title": "Hello!"
+}
@@ -9,6 +9,9 @@ syntax that closely mimics the document being modified. Unlike [JSON Patch](json
 express every kind of change (e.g., it cannot reorder array elements or remove a specific array element), but it is
 easier to read and write for object-shaped documents.

+The function [`merge_diff`](../api/basic_json/merge_diff.md) creates a merge patch that changes one JSON value into
+another.
+
 !!! tip "Not a general deep merge"

    A merge patch is not a general deep merge: a `#!json null` value in the patch deletes the key from the target.
@@ -35,4 +38,5 @@ easier to read and write for object-shaped documents.
 - [JSON Patch and Diff](json_patch.md) - a more expressive alternative that describes a sequence of operations
 - [JSON Pointer](json_pointer.md) - the addressing scheme used by JSON Patch
 - Function [`merge_patch`](../api/basic_json/merge_patch.md)
+- Function [`merge_diff`](../api/basic_json/merge_diff.md)
 - Function [`update`](../api/basic_json/update.md) - merge objects, optionally recursively
@@ -343,8 +343,11 @@ The number types can be changed with template parameters.
      in case of overflow.
    - The type for unsigned integers must be convertible from `#!c unsigned long long`.  The type for floating-point
      numbers is used in case of overflow.
-    - The types for signed and unsigned integers must be distinct, see
-      [#2573](https://github.com/nlohmann/json/issues/2573).
+    - The type for unsigned integers can also be the same signed type as the type for signed integers (e.g.,
+      `#!c std::int64_t` for both). Then every integer is stored as a signed integer, and
+      [`is_number_unsigned()`](../../api/basic_json/is_number_unsigned.md) is always `#!c false`, see
+      [Template Parameter Requirements](template_parameters.md#same-type-for-both).
+    - The type for floating-point numbers must be distinct from the integer types.
    - Only `#!c double`, `#!c float`, and `#!c long double` are supported for floating-point numbers.

 !!! example
@@ -40,19 +40,19 @@ Requirements are split into two groups:

 ## Overview

-| Template parameter                                                | Default                           | Notable substitutes                                                   |
-|-------------------------------------------------------------------|-----------------------------------|-----------------------------------------------------------------------|
-| [`ObjectType`](#objecttype)                                       | `std::map`                        | [`nlohmann::ordered_map`](../../api/ordered_map.md), Abseil hash maps |
-| [`ArrayType`](#arraytype)                                         | `std::vector`                     | `#!cpp std::deque`                                                    |
-| [`StringType`](#stringtype)                                       | `std::string`                     | `std::string`-like types over `char`                                  |
-| [`BooleanType`](#booleantype)                                     | `bool`                            | none worth using                                                      |
-| [`NumberIntegerType`](#numberintegertype-and-numberunsignedtype)  | `std::int64_t`                    | any signed integer type                                               |
-| [`NumberUnsignedType`](#numberintegertype-and-numberunsignedtype) | `std::uint64_t`                   | any unsigned integer type at least as wide as `NumberIntegerType`     |
-| [`NumberFloatType`](#numberfloattype)                             | `double`                          | `float` (`long double`: no binary formats)                            |
-| [`AllocatorType`](#allocatortype)                                 | `std::allocator`                  | stateless allocators                                                  |
-| [`JSONSerializer`](#jsonserializer)                               | `adl_serializer`                  | serializers with the same interface                                   |
-| [`BinaryType`](#binarytype)                                       | `#!cpp std::vector<std::uint8_t>` | `#!cpp std::vector<char>`                                             |
-| [`CustomBaseClass`](#custombaseclass)                             | `void`                            | any default-constructible class                                       |
+| Template parameter                                                | Default                           | Notable substitutes                                                                              |
+|-------------------------------------------------------------------|-----------------------------------|--------------------------------------------------------------------------------------------------|
+| [`ObjectType`](#objecttype)                                       | `std::map`                        | [`nlohmann::ordered_map`](../../api/ordered_map.md), Abseil hash maps                            |
+| [`ArrayType`](#arraytype)                                         | `std::vector`                     | `#!cpp std::deque`                                                                               |
+| [`StringType`](#stringtype)                                       | `std::string`                     | `std::string`-like types over `char`                                                             |
+| [`BooleanType`](#booleantype)                                     | `bool`                            | none worth using                                                                                 |
+| [`NumberIntegerType`](#numberintegertype-and-numberunsignedtype)  | `std::int64_t`                    | any signed integer type                                                                          |
+| [`NumberUnsignedType`](#numberintegertype-and-numberunsignedtype) | `std::uint64_t`                   | any unsigned integer type at least as wide as `NumberIntegerType`, or `NumberIntegerType` itself |
+| [`NumberFloatType`](#numberfloattype)                             | `double`                          | `float` (`long double`: no binary formats)                                                       |
+| [`AllocatorType`](#allocatortype)                                 | `std::allocator`                  | stateless allocators                                                                             |
+| [`JSONSerializer`](#jsonserializer)                               | `adl_serializer`                  | serializers with the same interface                                                              |
+| [`BinaryType`](#binarytype)                                       | `#!cpp std::vector<std::uint8_t>` | `#!cpp std::vector<char>`                                                                        |
+| [`CustomBaseClass`](#custombaseclass)                             | `void`                            | any default-constructible class                                                                  |

 !!! warning "Third-party containers and incomplete types"

@@ -499,13 +499,14 @@ Both types are stored **directly** inside `basic_json`'s union.
 ### Always required

 - `#!cpp std::is_integral` must be satisfied: `NumberIntegerType` must be a **signed** integer type,
-  `NumberUnsignedType` an **unsigned** integer type. Class types are not supported -- among others, the constructors
-  taking integer values are constrained on `#!cpp std::is_integral`.
+  `NumberUnsignedType` an **unsigned** integer type or the same type as `NumberIntegerType` (see
+  [below](#same-type-for-both)). Class types are not supported -- among others, the constructors taking integer values
+  are constrained on `#!cpp std::is_integral`.
 - Trivially default-constructible, trivially copyable, and trivially destructible (union member).
 - `#!cpp std::numeric_limits` must be specialized for both types.
- `NumberUnsignedType` must be able to represent the absolute value of every `NumberIntegerType` value; serialization
-  of negative numbers converts the value to `NumberUnsignedType`. A `#!cpp static_assert` requires it to be at least as
-  wide as `NumberIntegerType`, which is what that amounts to for the standard integer types.
+- An unsigned `NumberUnsignedType` must be able to represent the absolute value of every `NumberIntegerType` value;
+  serialization of negative numbers converts the value to `NumberUnsignedType`. A `#!cpp static_assert` requires it to
+  be at least as wide as `NumberIntegerType`, which is what that amounts to for the standard integer types.
 - Both types must fit into the internal 64-character number buffer used by
  [`dump`](../../api/basic_json/dump.md), which is the case for all standard integer types.
 - [`std::hash<basic_json>`](../../api/basic_json/std_hash.md) additionally requires `#!cpp std::hash` specializations.
@@ -517,6 +518,23 @@ is stored as [`number_float_t`](../../api/basic_json/number_float_t.md) instead.
 therefore silently changes parse results rather than raising an error. See
 [Number Handling](number_handling.md) for details.

+#### Same type for both
+
+`NumberUnsignedType` may be the same type as `NumberIntegerType`, e.g.
+`#!cpp nlohmann::json::with_integers_t<std::int64_t, std::int64_t>` (see
+[`with_integers_t`](../../api/basic_json/with_t.md)), for code that only wants to handle one integer type. Such a `basic_json` stores every integer as
+[`number_integer_t`](../../api/basic_json/number_integer_t.md):
+
+- [`is_number_unsigned()`](../../api/basic_json/is_number_unsigned.md) is always `#!cpp false`, and
+  [`type()`](../../api/basic_json/type.md) never returns `value_t::number_unsigned`. Constructing a value from
+  `value_t::number_unsigned` gives a `value_t::number_integer` value.
+- Values of unsigned C++ types (e.g., `#!cpp 5u`) are converted to `NumberIntegerType`, so values above its maximum
+  wrap around, as values outside the range of a narrower `NumberIntegerType` already do.
+- The parsers store a non-negative integer above the maximum of `NumberIntegerType` (e.g., `18446744073709551615` for
+  `#!cpp std::int64_t`) as [`number_float_t`](../../api/basic_json/number_float_t.md), like any other integer that does
+  not fit.
+- Converting from a `basic_json` with distinct types turns its unsigned values into `number_integer_t` values.
+
 ### Compatible types

 | Type pair                                                                                    | Support                                                                                                                                                                                          |
@@ -525,6 +543,7 @@ therefore silently changes parse results rather than raising an error. See
 | `#!cpp std::int32_t` / `#!cpp std::uint32_t`, `#!cpp long long` / `#!cpp unsigned long long` | full; narrower types change which literals the parser can represent                                                                                                                              |
 | any other pair of standard signed/unsigned integer types                                     | full                                                                                                                                                                                             |
 | class types, enumerations                                                                    | not usable; `#!cpp std::is_integral` must hold                                                                                                                                                   |
+| the same signed integer type for both, e.g. `#!cpp std::int64_t` / `#!cpp std::int64_t`      | full; every integer is stored as `number_integer_t`, see [above](#same-type-for-both)                                                                                                            |
 | `#!cpp bool`, or a type already used for another member of the union                         | not usable; `#!cpp std::is_integral<bool>` is in fact `#!cpp true`, but the `get_impl_ptr` overloads for `boolean_t`, `number_integer_t`, `number_unsigned_t` and `number_float_t` would collide |

 ## `NumberFloatType`
@@ -185,9 +185,11 @@ The lexer detects two optional extensions at compile time. Only `iterator_input_
 random-access input of single-byte characters:

 - `supports_seek`, `get_consumed_count()`, and `copy_consumed_range()` let the lexer reconstruct already consumed input
-  for error messages instead of copying every character it reads.
+  for error messages instead of copying every character it reads. With `get_read_count()` and
+  `count_consumed_lines()`, the lexer also derives the read position from the adapter and counts lines only when an
+  error needs them, instead of counting characters and lines on every read.
 - `supports_bulk_scan`, `bulk_data()`, `bulk_remaining()`, and `bulk_skip()` let the lexer scan strings directly in
-  contiguous memory, several bytes at a time.
+  contiguous memory, several bytes at a time, and skip the spaces that indent a line in 8-byte steps.

 The function `input_adapter` picks the right adapter for the argument passed to `parse`, `accept`, `sax_parse`, or the
 `from_*` functions:
@@ -182,6 +182,7 @@ nav:
          - 'json_serializer': api/basic_json/json_serializer.md
          - 'max_size': api/basic_json/max_size.md
          - 'meta': api/basic_json/meta.md
+          - 'merge_diff': api/basic_json/merge_diff.md
          - 'merge_patch': api/basic_json/merge_patch.md
          - 'number_float_t': api/basic_json/number_float_t.md
          - 'number_integer_t': api/basic_json/number_integer_t.md
@@ -42,6 +42,25 @@ inline int count_leading_zeros(std::uint64_t x) noexcept
 #endif
 }

+/// number of trailing zero bits of x (x != 0)
+inline int count_trailing_zeros(std::uint64_t x) noexcept
+{
+#if defined(__GNUC__) || defined(__clang__)
+    return __builtin_ctzll(x);
+#else
+    int n = 0;
+    for (int shift = 32; shift != 0; shift >>= 1)
+    {
+        if ((x << (64 - shift)) == 0)
+        {
+            n += shift;
+            x >>= shift;
+        }
+    }
+    return n;
+#endif
+}
+
 /// the 128-bit product of two 64-bit numbers
 struct uint128_parts
 {
@@ -80,7 +80,11 @@ void get_arithmetic_value(const BasicJsonType& j, ArithmeticType& val)
    {
        case value_t::number_unsigned:
        {
-            val = static_cast<ArithmeticType>(*j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>());
+            // never null: a basic_json whose number_unsigned_t is number_integer_t
+            // stores no number_unsigned values (#2573)
+            const auto* ptr = j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>();
+            JSON_ASSERT(ptr != nullptr);
+            val = static_cast<ArithmeticType>(*ptr);
            break;
        }
        case value_t::number_integer:
@@ -150,7 +154,7 @@ inline void from_json(const BasicJsonType& j, typename BasicJsonType::number_flo
 }

 template<typename BasicJsonType>
-inline void from_json(const BasicJsonType& j, typename BasicJsonType::number_unsigned_t& val)
+inline void from_json(const BasicJsonType& j, number_unsigned_overload_t<BasicJsonType>& val)
 {
    get_arithmetic_value(j, val);
 }
@@ -406,7 +410,11 @@ inline void from_json(const BasicJsonType& j, ArithmeticType& val)
    {
        case value_t::number_unsigned:
        {
-            val = static_cast<ArithmeticType>(*j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>());
+            // never null: a basic_json whose number_unsigned_t is number_integer_t
+            // stores no number_unsigned values (#2573)
+            const auto* ptr = j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>();
+            JSON_ASSERT(ptr != nullptr);
+            val = static_cast<ArithmeticType>(*ptr);
            break;
        }
        case value_t::number_integer:
@@ -303,14 +303,14 @@ inline void to_json(BasicJsonType& j, FloatType val) noexcept
 }

 template<typename BasicJsonType, typename CompatibleNumberUnsignedType,
-         enable_if_t<is_compatible_integer_type<typename BasicJsonType::number_unsigned_t, CompatibleNumberUnsignedType>::value, int> = 0>
+         enable_if_t<is_compatible_integer_type<number_unsigned_overload_t<BasicJsonType>, CompatibleNumberUnsignedType>::value, int> = 0>
 inline void to_json(BasicJsonType& j, CompatibleNumberUnsignedType val) noexcept
 {
    external_constructor<value_t::number_unsigned>::construct(j, static_cast<typename BasicJsonType::number_unsigned_t>(val));
 }

 template<typename BasicJsonType, typename CompatibleNumberIntegerType,
-         enable_if_t<is_compatible_integer_type<typename BasicJsonType::number_integer_t, CompatibleNumberIntegerType>::value, int> = 0>
+         enable_if_t<is_compatible_number_integer_type<BasicJsonType, CompatibleNumberIntegerType>::value, int> = 0>
 inline void to_json(BasicJsonType& j, CompatibleNumberIntegerType val) noexcept
 {
    external_constructor<value_t::number_integer>::construct(j, static_cast<typename BasicJsonType::number_integer_t>(val));
@@ -8,12 +8,12 @@

 #pragma once

-#include <algorithm> // min
+#include <algorithm> // count, find, min
 #include <array> // array
 #include <cstddef> // size_t
 #include <cstdint> // uint32_t
 #include <cstring> // strlen
-#include <iterator> // begin, end, iterator_traits, random_access_iterator_tag, distance, next
+#include <iterator> // begin, end, iterator_traits, random_access_iterator_tag, distance, next, reverse_iterator
 #include <streambuf> // streambuf
 #include <string> // string, char_traits
 #include <type_traits> // enable_if, is_base_of, is_pointer, is_integral, remove_pointer
@@ -297,6 +297,7 @@ class iterator_input_adapter
            return result;
        }

+        ++eof_reads;
        return char_traits<char_type>::eof();
    }

@@ -306,6 +307,26 @@ class iterator_input_adapter
        return static_cast<std::size_t>(std::distance(begin, current));
    }

+    // number of get_character() calls so far, including those that returned
+    // EOF; the lexer derives its position from it (see lexer::lazy_position)
+    std::size_t get_read_count() const
+    {
+        return get_consumed_count() + eof_reads;
+    }
+
+    // number of newlines in the consumed range [0, last_index); @a line_start
+    // is set to the index after the last of them (0 if there is none); only
+    // valid when supports_seek
+    std::size_t count_consumed_lines(std::size_t last_index, std::size_t& line_start) const
+    {
+        const auto to = std::next(begin, static_cast<typename std::iterator_traits<IteratorType>::difference_type>(last_index));
+        const auto newline = char_traits<char_type>::to_char_type('\n');
+        using reverse_it = std::reverse_iterator<IteratorType>;
+        const auto last_newline = std::find(reverse_it(to), reverse_it(begin), newline);
+        line_start = static_cast<std::size_t>(std::distance(begin, last_newline.base()));
+        return static_cast<std::size_t>(std::count(begin, last_newline.base(), newline));
+    }
+
    // append the already-consumed characters in the half-open range
    // [first_index, last_index) to @a out; only valid when supports_seek
    template<typename ContainerType>
@@ -422,6 +443,8 @@ class iterator_input_adapter
    IteratorType begin;
    IteratorType current;
    SentinelType end;
+    /// number of get_character() calls that returned EOF
+    std::size_t eof_reads = 0;

    template<typename BaseInputAdapter, size_t T>
    friend struct wide_string_input_helper;
@@ -217,7 +217,7 @@ struct diagnostic_positions
        {
            // Lexer has read the first character of the container, so
            // subtract 1 from the position to get the correct start position.
-            v.start_position = lexer->get_position() - 1;
+            v.start_position = lexer->get_chars_read_total() - 1;
        }
    }

@@ -231,7 +231,7 @@ struct diagnostic_positions
        if (lexer)
        {
            // Lexer's position is past the closing brace or bracket, so set that as the end position.
-            v.end_position = lexer->get_position();
+            v.end_position = lexer->get_chars_read_total();
        }
    }

@@ -247,7 +247,7 @@ struct diagnostic_positions
            // Lexer has read past the current field value, so set the end position to the current position.
            // The start position will be set below based on the length of the string representation
            // of the value.
-            v.end_position = lexer->get_position();
+            v.end_position = lexer->get_chars_read_total();

            switch (v.type())
            {
@@ -17,6 +17,7 @@
 #include <utility> // move
 #include <vector> // vector

+#include <nlohmann/detail/bit_ops.hpp>
 #include <nlohmann/detail/input/input_adapters.hpp>
 #include <nlohmann/detail/input/number_parse.hpp>
 #include <nlohmann/detail/input/position_t.hpp>
@@ -186,6 +187,15 @@ class lexer : public lexer_base<BasicJsonType>
    static constexpr bool lazy_token_string =
        input_adapter_supports_seek<InputAdapterType>(is_detected<detect_supports_seek, InputAdapterType> {});

+    /// whether the read position is derived from the input adapter on demand
+    /// instead of being counted on every scanned character. Seekable adapters
+    /// know how much input they consumed and can revisit it, so
+    /// chars_read_total is the adapter's read count (minus a pending unget),
+    /// and line and column are recomputed from the consumed input only when
+    /// get_position() is called (errors). Counting per character kept two
+    /// increments and a newline check in the hot path of every get().
+    static constexpr bool lazy_position = lazy_token_string;
+
    /// whether a simulated unget can be passed on to the input adapter, which
    /// then leaves the character in the input; see
    /// input_adapter_supports_lookahead
@@ -195,7 +205,9 @@ class lexer : public lexer_base<BasicJsonType>
    /// whether string scanning may bulk-consume runs of ordinary characters
    /// directly from a contiguous input buffer (SWAR fast path). This requires
    /// the token to be reconstructible lazily (lazy_token_string), so bypassing
-    /// the per-character capture in get() cannot lose error diagnostics.
+    /// the per-character capture in get() cannot lose error diagnostics. It
+    /// also implies lazy_position, so the bulk paths need not advance the
+    /// position counters.
    static constexpr bool bulk_scan =
        lazy_token_string
        && input_adapter_supports_bulk_scan<InputAdapterType>(is_detected<detect_supports_bulk_scan, InputAdapterType> {});
@@ -331,10 +343,6 @@ class lexer : public lexer_base<BasicJsonType>
        }
        token_buffer.append(reinterpret_cast<const typename string_t::value_type*>(data), pos);
        ia.bulk_skip(pos);
-        // the run contains no newline (all bytes < 0x20 are treated as special),
-        // so only the flat character counters advance
-        position.chars_read_total += pos;
-        position.chars_read_current_line += pos;
    }

    /// streaming input: no bulk fast path
@@ -1567,8 +1575,6 @@ scan_number_done:
            if (JSON_HEDLEY_LIKELY(integer_result != token_type::uninitialized))
            {
                ia.bulk_skip(len - 1);
-                position.chars_read_total += (len - 1);
-                position.chars_read_current_line += (len - 1);
                return integer_result;
            }
            // The value does not fit an integer, so this token converts as a
@@ -1585,8 +1591,6 @@ scan_number_done:
        decimal_point_position = dot_index;

        ia.bulk_skip(len - 1);
-        position.chars_read_total += (len - 1);
-        position.chars_read_current_line += (len - 1);

        return convert_number(number_type, mantissa_end);
    }
@@ -1637,7 +1641,7 @@ scan_number_done:

 #if JSON_DIAGNOSTIC_POSITIONS
        // the first character of the token has already been read, hence the -1
-        token_start_position = position.chars_read_total - 1;
+        token_start_position = get_chars_read_total() - 1;
 #endif

        note_token_start(std::integral_constant<bool, lazy_token_string> {});
@@ -1690,6 +1694,15 @@ scan_number_done:
    /// per-character position counters (line-count-on-'\n' bookkeeping is
    /// handled afterwards, in track_after_read(), once `current` is known)
    void advance_position() noexcept
+    {
+        advance_position_impl(std::integral_constant<bool, lazy_position> {});
+    }
+
+    /// seekable adapter: the position is derived from the adapter on demand
+    void advance_position_impl(std::true_type /*lazy*/) const noexcept {}
+
+    /// streaming adapter: count the character
+    void advance_position_impl(std::false_type /*lazy*/) noexcept
    {
        ++position.chars_read_total;
        ++position.chars_read_current_line;
@@ -1703,7 +1716,16 @@ scan_number_done:
        // seekable adapters reconstruct the token lazily on error (see
        // get_token_string), so the eager per-character copy is skipped
        capture_char(std::integral_constant<bool, lazy_token_string> {});
+        track_newline(std::integral_constant<bool, lazy_position> {});
+        return current;
+    }

+    /// seekable adapter: lines are counted on demand in get_position()
+    void track_newline(std::true_type /*lazy*/) const noexcept {}
+
+    /// streaming adapter: start a new line after reading a newline
+    void track_newline(std::false_type /*lazy*/) noexcept
+    {
        if (current == '\n')
        {
            ++position.lines_read;
@@ -1712,8 +1734,6 @@ scan_number_done:
            chars_read_before_newline = position.chars_read_current_line;
            position.chars_read_current_line = 0;
        }
-
-        return current;
    }

    /*!
@@ -1757,12 +1777,22 @@ scan_number_done:
    We implement unget by setting variable next_unget to true. The input is not
    changed - we just simulate ungetting by modifying chars_read_total,
    chars_read_current_line, and token_string. The next call to get() will
-    behave as if the unget character is read again.
+    behave as if the unget character is read again. With lazy_position, the
+    pending next_unget is all get_chars_read_total() needs.
    */
    void unget()
    {
        next_unget = true;
+        unget_position(std::integral_constant<bool, lazy_position> {});
+        uncapture_char(std::integral_constant<bool, lazy_token_string> {});
+    }

+    /// seekable adapter: get_chars_read_total() accounts for next_unget
+    void unget_position(std::true_type /*lazy*/) const noexcept {}
+
+    /// streaming adapter: step the counters back over the ungotten character
+    void unget_position(std::false_type /*lazy*/) noexcept
+    {
        --position.chars_read_total;

        // in case we "unget" a newline, we have to also decrement the lines_read
@@ -1785,8 +1815,6 @@ scan_number_done:
        {
            --position.chars_read_current_line;
        }
-
-        uncapture_char(std::integral_constant<bool, lazy_token_string> {});
    }

    /// adapter without lookahead: nothing to do (see release_lookahead)
@@ -1857,10 +1885,21 @@ scan_number_done:
    // diagnostics
    /////////////////////

-    /// return position of last read token
-    constexpr position_t get_position() const noexcept
+    /*!
+    @brief return the number of characters read so far
+
+    Unlike get_position(), this is O(1) for all adapters, so it may be called
+    for every value (JSON_DIAGNOSTIC_POSITIONS).
+    */
+    std::size_t get_chars_read_total() const noexcept
    {
-        return position;
+        return get_chars_read_total_impl(std::integral_constant<bool, lazy_position> {});
+    }
+
+    /// return position of last read token
+    position_t get_position() const
+    {
+        return get_position_impl(std::integral_constant<bool, lazy_position> {});
    }

    /*!
@@ -1897,6 +1936,43 @@ scan_number_done:
    }
 #endif

+  private:
+    /// seekable adapter: every get() either read from the adapter (including
+    /// reads at EOF, which get() counts as characters as well) or replayed an
+    /// ungotten character, so the count is the adapter's read count minus a
+    /// still pending unget
+    std::size_t get_chars_read_total_impl(std::true_type /*lazy*/) const noexcept
+    {
+        return ia.get_read_count() - (next_unget ? 1u : 0u);
+    }
+
+    /// streaming adapter: the counter is maintained by get() and unget()
+    std::size_t get_chars_read_total_impl(std::false_type /*lazy*/) const noexcept
+    {
+        return position.chars_read_total;
+    }
+
+    /// seekable adapter: count the lines in the consumed input; O(input read
+    /// so far), but only called on errors
+    position_t get_position_impl(std::true_type /*lazy*/) const
+    {
+        position_t result;
+        result.chars_read_total = get_chars_read_total();
+        // reads at EOF count as characters but are not part of the input
+        const std::size_t consumed = (std::min)(result.chars_read_total, ia.get_consumed_count());
+        std::size_t line_start = 0;
+        result.lines_read = ia.count_consumed_lines(consumed, line_start);
+        result.chars_read_current_line = result.chars_read_total - line_start;
+        return result;
+    }
+
+    /// streaming adapter: the position is maintained by get() and unget()
+    position_t get_position_impl(std::false_type /*lazy*/) const noexcept
+    {
+        return position;
+    }
+
+  public:
    /// seekable adapter: rebuild the last read token from the input on demand
    const std::vector<char_type>& collect_token_chars(std::vector<char_type>& out, std::true_type /*lazy*/) const
    {
@@ -2004,15 +2080,57 @@ scan_number_done:
        // into one that reloads the pointer from memory every character
        do
        {
+            if (current == '\n')
+            {
+                skip_indentation(std::integral_constant<bool, bulk_scan> {});
+            }
            get_ignoring_pending_unget();
        }
        while (current_is_whitespace());
    }

+    /*!
+    @brief contiguous input: skip the space indentation that follows a newline
+           8 bytes at a time
+
+    Pretty-printed JSON indents every line with a run of spaces, which the loop
+    in skip_whitespace() would otherwise read one character at a time. The
+    spaces are skipped 8 bytes at a time; the last 7 bytes of the input and any
+    other whitespace are left to that loop. Skipping bypasses get(), which is
+    fine because bulk_scan implies lazy_position: the position is derived from
+    the adapter, not counted per character.
+    */
+    void skip_indentation(std::true_type /*bulk*/)
+    {
+        JSON_ASSERT(!next_unget);
+        const std::size_t remaining = ia.bulk_remaining();
+        if (remaining < 8)
+        {
+            return;
+        }
+        const char* const data = reinterpret_cast<const char*>(ia.bulk_data());
+        std::size_t pos = 0;
+        for (; pos + 8 <= remaining; pos += 8)
+        {
+            // little-endian, so the first byte is the lowest
+            const std::uint64_t non_space = read_eight_bytes(data + pos) ^ 0x2020202020202020ull;
+            if (non_space != 0)
+            {
+                // skip the spaces before the first other byte of this word
+                pos += static_cast<std::size_t>(count_trailing_zeros(non_space)) / 8;
+                break;
+            }
+        }
+        ia.bulk_skip(pos);
+    }
+
+    /// streaming input: no bulk fast path
+    void skip_indentation(std::false_type /*bulk*/) const noexcept {}
+
    token_type scan()
    {
        // initially, skip the BOM
-        if (position.chars_read_total == 0 && !skip_bom())
+        if (get_chars_read_total() == 0 && !skip_bom())
        {
            error_message = "invalid BOM; must be 0xEF 0xBB 0xBF if given";
            return token_type::parse_error;
@@ -2039,7 +2157,7 @@ scan_number_done:
    token_type scan_expecting(token_type expected_type)
    {
        JSON_ASSERT(expected_type == token_type::name_separator || expected_type == token_type::value_separator);
-        JSON_ASSERT(position.chars_read_total > 0);
+        JSON_ASSERT(get_chars_read_total() > 0);
        const char_int_type expected_char = static_cast<unsigned char>((expected_type == token_type::name_separator) ? ':' : ',');
        skip_whitespace();
        if (JSON_HEDLEY_LIKELY(current == expected_char))
@@ -18,6 +18,7 @@
 #include <cstring> // memcpy
 #include <limits> // numeric_limits
 #include <string> // string
+#include <type_traits> // is_signed, true_type, false_type

 #include <nlohmann/detail/bit_ops.hpp>
 #include <nlohmann/detail/input/pow5_table.hpp>
@@ -44,6 +45,20 @@ NLOHMANN_JSON_NAMESPACE_BEGIN
 namespace detail
 {

+// whether an integer of a signed type is negative; the overload for other types
+// avoids comparing an unsigned value with zero
+template<typename NumberType>
+constexpr bool is_negative_integer(NumberType x, std::true_type /*is_signed*/) noexcept
+{
+    return x < 0;
+}
+
+template<typename NumberType>
+constexpr bool is_negative_integer(NumberType /*unused*/, std::false_type /*is_signed*/) noexcept
+{
+    return false;
+}
+
 /*!
@brief fast integer parser for an already-validated unsigned integer

@@ -77,8 +92,10 @@ bool parse_integer_unsigned(const char* first, const char* last, NumberUnsignedT
        x = (x * 10u) + digit;
    }
    value = static_cast<NumberUnsignedType>(x);
-    // reject values that do not round-trip into a narrower NumberUnsignedType
-    return static_cast<std::uint64_t>(value) == x;
+    // reject values that do not round-trip into a narrower NumberUnsignedType,
+    // and values that wrap around to negative numbers if it is a signed type
+    // (number_unsigned_t may be the same type as number_integer_t, #2573)
+    return static_cast<std::uint64_t>(value) == x && !is_negative_integer(value, std::is_signed<NumberUnsignedType>());
 }

 /*!
@@ -370,7 +370,7 @@ class parser
                    }
                    case token_type::end_of_input:
                    {
-                        if (JSON_HEDLEY_UNLIKELY(m_lexer.get_position().chars_read_total == 1))
+                        if (JSON_HEDLEY_UNLIKELY(m_lexer.get_chars_read_total() == 1))
                        {
                            return syntax_error(*sax, "attempting to parse an empty input; check that your input string or stream contains the expected JSON");
                        }
@@ -520,8 +520,10 @@ class parser
    {
        // MSVC 2015 reports C4100 (unreferenced parameter) when SAX::parse_error is static
        static_cast<void>(sax);
-        return sax.parse_error(m_lexer.get_position(), m_lexer.get_token_string(),
-                               parse_error::create(exception_id::syntax_error, m_lexer.get_position(), message, nullptr));
+        // computing the position is O(input read so far) for seekable input
+        const position_t position = m_lexer.get_position();
+        return sax.parse_error(position, m_lexer.get_token_string(),
+                               parse_error::create(exception_id::syntax_error, position, message, nullptr));
    }

    std::string exception_message(const token_type expected, const std::string& context)
@@ -683,6 +683,22 @@ struct is_compatible_integer_type
    : is_compatible_integer_type_impl<RealIntegerType,
      CompatibleNumberIntegerType> {};

+// whether to_json() stores an integer of type CompatibleNumberIntegerType as
+// number_integer
+template<typename BasicJsonType, typename CompatibleNumberIntegerType, typename = void>
+struct is_compatible_number_integer_type
+    : is_compatible_integer_type<typename BasicJsonType::number_integer_t, CompatibleNumberIntegerType> {};
+
+// if number_unsigned_t is the same type as number_integer_t, unsigned integers
+// are stored as number_integer as well (#2573)
+template<typename BasicJsonType, typename CompatibleNumberIntegerType>
+struct is_compatible_number_integer_type < BasicJsonType, CompatibleNumberIntegerType,
+           enable_if_t < std::is_same<typename BasicJsonType::number_integer_t, typename BasicJsonType::number_unsigned_t>::value&&
+           std::is_integral<CompatibleNumberIntegerType>::value&&
+           std::is_unsigned<CompatibleNumberIntegerType>::value&&
+           !std::is_same<bool, CompatibleNumberIntegerType>::value >>
+           : std::is_constructible<typename BasicJsonType::number_integer_t, CompatibleNumberIntegerType> {};
+
 template<typename BasicJsonType, typename CompatibleType, typename = void>
 struct is_compatible_type_impl: std::false_type {};

@@ -1020,6 +1036,27 @@ constexpr bool value_in_range_of(T val)
 template<bool Value>
 using bool_constant = std::integral_constant<bool, Value>;

+// Stands in for number_unsigned_t in overload sets if it is the same type as
+// number_integer_t, so that the unsigned overloads do not collide with the
+// integer ones. Never constructed. Such a basic_json stores every integer as
+// number_integer (#2573).
+struct same_as_number_integer_type {};
+
+// NumberUnsignedType, or same_as_number_integer_type if it is the same type as
+// NumberIntegerType; basic_json uses this one, as it cannot name its own member
+// types through an incomplete basic_json (MSVC reports a recursive alias, and
+// old GCC versions crash)
+template<typename NumberIntegerType, typename NumberUnsignedType>
+using number_unsigned_overload_type = typename std::conditional <
+                                      std::is_same<NumberIntegerType, NumberUnsignedType>::value,
+                                      same_as_number_integer_type,
+                                      NumberUnsignedType >::type;
+
+// number_unsigned_t of BasicJsonType, or same_as_number_integer_type if it is
+// the same type as number_integer_t
+template<typename BasicJsonType>
+using number_unsigned_overload_t = number_unsigned_overload_type<typename BasicJsonType::number_integer_t, typename BasicJsonType::number_unsigned_t>;
+
 ///////////////////////////////////////////////////////////////////////////////
 // is_c_string
 ///////////////////////////////////////////////////////////////////////////////
@@ -221,7 +221,7 @@ class binary_writer

            case value_t::number_unsigned:
            {
-                write_cbor_head(0x00, j.m_data.m_value.number_unsigned);
+                write_cbor_head(0x00, conditional_static_cast<std::uint64_t>(j.m_data.m_value.number_unsigned));
                break;
            }

@@ -1601,7 +1601,7 @@ class binary_writer
                return calc_bson_integer_size(j.m_data.m_value.number_integer);

            case value_t::number_unsigned:
-                return calc_bson_unsigned_size(j.m_data.m_value.number_unsigned);
+                return calc_bson_unsigned_size(conditional_static_cast<std::uint64_t>(j.m_data.m_value.number_unsigned));

            case value_t::string:
                return calc_bson_string_size(*j.m_data.m_value.string, j);
@@ -1643,7 +1643,7 @@ class binary_writer
                return write_bson_integer(name, j.m_data.m_value.number_integer);

            case value_t::number_unsigned:
-                return write_bson_unsigned(name, j.m_data.m_value.number_unsigned);
+                return write_bson_unsigned(name, conditional_static_cast<std::uint64_t>(j.m_data.m_value.number_unsigned));

            case value_t::string:
                return write_bson_string(name, *j.m_data.m_value.string);
@@ -49,6 +49,12 @@ class serializer
    using number_float_t = typename BasicJsonType::number_float_t;
    using number_integer_t = typename BasicJsonType::number_integer_t;
    using number_unsigned_t = typename BasicJsonType::number_unsigned_t;
+    /// type of the absolute value of an integer: number_unsigned_t, or its
+    /// unsigned counterpart if it is signed (it may be number_integer_t, #2573)
+    using number_magnitude_t = typename std::conditional <
+                               std::is_integral<number_unsigned_t>::value && std::is_signed<number_unsigned_t>::value,
+                               std::make_unsigned<number_unsigned_t>,
+                               std::enable_if<true, number_unsigned_t >>::type::type;
    using binary_char_t = typename BasicJsonType::binary_t::value_type;

  public:
@@ -1227,7 +1233,7 @@ class serializer
    @param[in] x  unsigned integer number to count its digits
    @return    number of decimal digits
    */
-    unsigned int count_digits(number_unsigned_t x) noexcept
+    unsigned int count_digits(number_magnitude_t x) noexcept
    {
        unsigned int n_digits = 1;
        for (;;)
@@ -1405,7 +1411,7 @@ class serializer
        // use a pointer to fill the buffer
        auto buffer_ptr = number_buffer.begin(); // NOLINT(llvm-qualified-auto,readability-qualified-auto)

-        number_unsigned_t abs_value;
+        number_magnitude_t abs_value;

        unsigned int n_chars{};

@@ -1419,7 +1425,7 @@ class serializer
        }
        else
        {
-            abs_value = static_cast<number_unsigned_t>(x);
+            abs_value = static_cast<number_magnitude_t>(x);
            n_chars = count_digits(abs_value);
        }

@@ -1562,17 +1568,6 @@ class serializer
        }
    }

-    /*
-     * Overload to make the compiler happy while it is instantiating
-     * dump_integer for number_unsigned_t.
-     * Must never be called.
-     */
-    number_unsigned_t remove_sign(number_unsigned_t x)
-    {
-        JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert) LCOV_EXCL_LINE
-        return x; // LCOV_EXCL_LINE
-    }
-
    /*
     * Helper function for dump_integer
     *
@@ -1582,10 +1577,10 @@ class serializer
     * absolute values of INT_MIN and INT_MAX are usually not the same. See
     * #1708 for details.
     */
-    number_unsigned_t remove_sign(number_integer_t x) noexcept
+    number_magnitude_t remove_sign(number_integer_t x) noexcept
    {
        JSON_ASSERT(x < 0);
-        return static_cast<number_unsigned_t>(-(x + 1)) + 1;
+        return static_cast<number_magnitude_t>(-(x + 1)) + 1;
    }

  private:
@@ -42,9 +42,14 @@
 // each of these, not only the forward declarations from json_fwd.hpp, so IWYU's suggestion to
 // drop them (nothing in this file otherwise names the type) would break every downstream
 // translation unit that relies on basic_json<>'s defaults actually being usable.
-#include <nlohmann/adl_serializer.hpp> // IWYU pragma: keep
+// export: client code names what these headers declare (nlohmann::json and ordered_json from
+// json_fwd.hpp, adl_serializer for specializations, json_ref behind brace initialization, the
+// NLOHMANN_DEFINE_* and NLOHMANN_JSON_NAMESPACE_* macros, and the literals at the end of this file), and include analyzers must
+// attribute it to this header, not tell clients to include the internal ones (issue #5812).
+// tests/iwyu_consumer checks this.
+#include <nlohmann/adl_serializer.hpp> // IWYU pragma: export
 #include <nlohmann/byte_container_with_subtype.hpp>
-#include <nlohmann/detail/abi_macros.hpp>
+#include <nlohmann/detail/abi_macros.hpp> // IWYU pragma: export
 #include <nlohmann/detail/conversions/from_json.hpp> // IWYU pragma: keep
 #include <nlohmann/detail/conversions/to_json.hpp> // IWYU pragma: keep
 #include <nlohmann/detail/exceptions.hpp>
@@ -61,8 +66,8 @@
 #include <nlohmann/detail/iterators/primitive_iterator.hpp>
 #include <nlohmann/detail/json_custom_base_class.hpp>
 #include <nlohmann/detail/json_pointer.hpp>
-#include <nlohmann/detail/json_ref.hpp>
-#include <nlohmann/detail/macro_scope.hpp>
+#include <nlohmann/detail/json_ref.hpp> // IWYU pragma: export
+#include <nlohmann/detail/macro_scope.hpp> // IWYU pragma: export
 #include <nlohmann/detail/meta/detected.hpp>
 #include <nlohmann/detail/string_concat.hpp>
 #include <nlohmann/detail/string_escape.hpp>
@@ -74,7 +79,7 @@
 #include <nlohmann/detail/output/serializer.hpp>
 #include <nlohmann/detail/recursion_depth_limit.hpp>
 #include <nlohmann/detail/value_t.hpp>
-#include <nlohmann/json_fwd.hpp>
+#include <nlohmann/json_fwd.hpp> // IWYU pragma: export
 #include <nlohmann/ordered_map.hpp> // IWYU pragma: keep
 #include <nlohmann/thirdparty/hedley/hedley.hpp>

@@ -495,8 +500,22 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
                  "NumberUnsignedType must be at least as wide as NumberIntegerType, "
                  "because it has to hold the absolute value of every NumberIntegerType value");

+    // NumberUnsignedType may be the same type as NumberIntegerType (#2573), but
+    // a repeated NumberFloatType would give overloads that collide, so it gets
+    // a readable diagnostic instead.
+    static_assert(!std::is_same<NumberFloatType, NumberIntegerType>::value && !std::is_same<NumberFloatType, NumberUnsignedType>::value,
+                  "NumberFloatType must be a different type than NumberIntegerType and NumberUnsignedType");
+
  private:

+    /// the kind a value of kind @a t is stored as: if number_unsigned_t is the
+    /// same type as number_integer_t, every integer is stored as number_integer
+    /// (#2573); every other kind is stored as itself
+    static constexpr value_t stored_kind(const value_t t) noexcept
+    {
+        return (std::is_same<number_integer_t, number_unsigned_t>::value && t == value_t::number_unsigned) ? value_t::number_integer : t;
+    }
+
    /// helper for exception-safe object creation
    template<typename T, typename... Args>
    JSON_HEDLEY_RETURNS_NON_NULL
@@ -570,8 +589,8 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        json_value(boolean_t v) noexcept : boolean(v) {}
        /// constructor for numbers (integer)
        json_value(number_integer_t v) noexcept : number_integer(v) {}
-        /// constructor for numbers (unsigned)
-        json_value(number_unsigned_t v) noexcept : number_unsigned(v) {}
+        /// constructor for numbers (unsigned); takes a placeholder if number_unsigned_t is number_integer_t
+        json_value(detail::number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType> v) noexcept : number_unsigned(v) {}
        /// constructor for numbers (floating-point)
        json_value(number_float_t v) noexcept : number_float(v) {}
        /// constructor for empty values of a given type
@@ -2176,7 +2195,7 @@ public:
    /// @brief create an empty value with a given type
    /// @sa https://json.nlohmann.me/api/basic_json/basic_json/
    basic_json(const value_t v)
-        : m_data(v)
+        : m_data(stored_kind(v))
    {
        assert_invariant();
    }
@@ -2257,7 +2276,7 @@ public:
        {
            convert_leaf(val);
        }
-        JSON_ASSERT(m_data.m_type == val.type());
+        JSON_ASSERT(m_data.m_type == stored_kind(val.type()));

        set_parents();
        assert_invariant();
@@ -2842,14 +2861,16 @@ public:
        return m_data.m_type == value_t::number_integer ? &m_data.m_value.number_integer : nullptr;
    }

-    /// get a pointer to the value (unsigned number)
-    number_unsigned_t* get_impl_ptr(number_unsigned_t* /*unused*/) noexcept
+    /// get a pointer to the value (unsigned number); takes a placeholder if
+    /// number_unsigned_t is number_integer_t (the integer overload handles it then)
+    number_unsigned_t* get_impl_ptr(detail::number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType>* /*unused*/) noexcept
    {
        return is_number_unsigned() ? &m_data.m_value.number_unsigned : nullptr;
    }

-    /// get a pointer to the value (unsigned number)
-    constexpr const number_unsigned_t* get_impl_ptr(const number_unsigned_t* /*unused*/) const noexcept
+    /// get a pointer to the value (unsigned number); takes a placeholder if
+    /// number_unsigned_t is number_integer_t (the integer overload handles it then)
+    constexpr const number_unsigned_t* get_impl_ptr(const detail::number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType>* /*unused*/) const noexcept
    {
        return is_number_unsigned() ? &m_data.m_value.number_unsigned : nullptr;
    }
@@ -7449,6 +7470,176 @@ public:
    }

  public:
+    /// @brief creates a diff as a JSON Merge Patch
+    /// @sa https://json.nlohmann.me/api/basic_json/merge_diff/
+    JSON_HEDLEY_WARN_UNUSED_RESULT
+    static basic_json merge_diff(const basic_json& source, const basic_json& target)
+    {
+        // unless both are objects, the patch is the target itself
+        if (!source.is_object() || !target.is_object())
+        {
+            return target;
+        }
+
+        return merge_diff_recursively(source, target, 0);
+    }
+
+  private:
+    /// @brief two objects @ref merge_diff_iteratively is diffing
+    struct merge_diff_frame
+    {
+        merge_diff_frame(const basic_json* source_, const basic_json* target_)
+            : source(source_), target(target_), member(source_->cbegin()), patch(value_t::object)
+        {}
+
+        // declared for GCC's -Weffc++, as in diff_frame
+        merge_diff_frame(const merge_diff_frame&) = default;
+        merge_diff_frame(merge_diff_frame&&) = default;
+        merge_diff_frame& operator=(const merge_diff_frame&) = default;
+        merge_diff_frame& operator=(merge_diff_frame&&) = default;
+        ~merge_diff_frame() = default;
+
+        /// the objects being diffed
+        const basic_json* source;
+        const basic_json* target;
+        /// the member of source being diffed; advanced once it is done
+        const_iterator member;
+        /// the patch for the members of source diffed so far
+        basic_json patch;
+    };
+
+    /// @brief add the members of object @a target that @a source does not
+    ///        have to the merge patch @a result
+    static void merge_diff_added_members(basic_json& result, const basic_json& source, const basic_json& target)
+    {
+        for (auto it = target.begin(); it != target.end(); ++it)
+        {
+            auto itf = source.find(it.key());
+            if (itf == source.end())
+            {
+                result[it.key()] = it.value();
+            }
+        }
+    }
+
+    /*!
+    @brief @ref merge_diff of two objects at nesting level @a depth
+
+    Diffing two nested objects calls this function again, once per nesting
+    level, so values nested deeply enough would exhaust the call stack and
+    terminate the process. The descent is bounded here: once @ref
+    detail::recursion_depth_limit levels have been entered, @ref
+    merge_diff_iteratively diffs what is left without the call stack.
+    */
+    static basic_json merge_diff_recursively(const basic_json& source, const basic_json& target, const std::size_t depth)
+    {
+        JSON_ASSERT(source.is_object() && target.is_object());
+
+        if (JSON_HEDLEY_UNLIKELY(depth >= detail::recursion_depth_limit()))
+        {
+            return merge_diff_iteratively(source, target);
+        }
+
+        basic_json result(value_t::object);
+
+        for (auto it = source.begin(); it != source.end(); ++it)
+        {
+            auto itf = target.find(it.key());
+            if (itf != target.end())
+            {
+                if (it.value().is_object() && itf.value().is_object())
+                {
+                    auto diff = merge_diff_recursively(it.value(), itf.value(), depth + 1);
+                    if (!diff.empty())
+                    {
+                        result[it.key()] = std::move(diff);
+                    }
+                }
+                else if (it.value() != itf.value())
+                {
+                    result[it.key()] = itf.value();
+                }
+            }
+            else
+            {
+                result[it.key()] = value_t::null;
+            }
+        }
+
+        merge_diff_added_members(result, source, target);
+        return result;
+    }
+
+    /*!
+    @brief @ref merge_diff of two objects without the call stack
+
+    Produces the same patch as @ref merge_diff_recursively, keeping the objects
+    being diffed on an explicit stack instead of descending into them. Two
+    nested objects are still diffed completely before the next member, so the
+    patch has its members in the same order as in the recursive version. Only
+    reached for objects nested more deeply than @ref
+    detail::recursion_depth_limit.
+    */
+    static basic_json merge_diff_iteratively(const basic_json& source, const basic_json& target)
+    {
+        // the patch of source and target, set once their frame is popped
+        basic_json result;
+        std::vector<merge_diff_frame> stack;
+        stack.emplace_back(&source, &target);
+        while (!stack.empty())
+        {
+            // the frame's members are copied out and it is changed through
+            // stack.back(): pushing a frame for nested objects or popping
+            // this one would invalidate a reference to it
+            const basic_json* const s = stack.back().source;
+            const basic_json* const t = stack.back().target;
+            const const_iterator it = stack.back().member;
+
+            if (it != s->cend())
+            {
+                const const_iterator itf = t->find(it.key());
+                if (itf != t->cend())
+                {
+                    if (it.value().is_object() && itf.value().is_object())
+                    {
+                        // member is advanced once their patch is under its key
+                        stack.emplace_back(&it.value(), &itf.value());
+                        continue;
+                    }
+                    if (it.value() != itf.value())
+                    {
+                        stack.back().patch[it.key()] = itf.value();
+                    }
+                }
+                else
+                {
+                    stack.back().patch[it.key()] = value_t::null;
+                }
+                ++stack.back().member;
+                continue;
+            }
+
+            merge_diff_added_members(stack.back().patch, *s, *t);
+
+            // these objects are done: continue with the ones they are in
+            basic_json patch = std::move(stack.back().patch);
+            stack.pop_back();
+            if (stack.empty())
+            {
+                result = std::move(patch);
+            }
+            else
+            {
+                if (!patch.empty())
+                {
+                    stack.back().patch[stack.back().member.key()] = std::move(patch);
+                }
+                ++stack.back().member;
+            }
+        }
+        return result;
+    }
+
    /// @}
 };

@@ -7625,7 +7816,7 @@ struct formatter<nlohmann::NLOHMANN_BASIC_JSON_TPL, char> // NOLINT(cert-dcl58-c
 // where needed.
 #ifndef JSON_NO_AUTOMATIC_UDLS
    // NOLINTNEXTLINE(misc-header-include-cycle): json_literals.hpp includes this header
-    #include <nlohmann/json_literals.hpp>
+    #include <nlohmann/json_literals.hpp> // IWYU pragma: export
 #endif

 #endif  // INCLUDE_NLOHMANN_JSON_HPP_
@@ -42,6 +42,11 @@
 // each of these, not only the forward declarations from json_fwd.hpp, so IWYU's suggestion to
 // drop them (nothing in this file otherwise names the type) would break every downstream
 // translation unit that relies on basic_json<>'s defaults actually being usable.
+// export: client code names what these headers declare (nlohmann::json and ordered_json from
+// json_fwd.hpp, adl_serializer for specializations, json_ref behind brace initialization, the
+// NLOHMANN_DEFINE_* and NLOHMANN_JSON_NAMESPACE_* macros, and the literals at the end of this file), and include analyzers must
+// attribute it to this header, not tell clients to include the internal ones (issue #5812).
+// tests/iwyu_consumer checks this.
 // #include <nlohmann/adl_serializer.hpp>
 //     __ _____ _____ _____
 //  __|  |   __|     |   | |  JSON for Modern C++
@@ -4682,6 +4687,22 @@ struct is_compatible_integer_type
    : is_compatible_integer_type_impl<RealIntegerType,
      CompatibleNumberIntegerType> {};

+// whether to_json() stores an integer of type CompatibleNumberIntegerType as
+// number_integer
+template<typename BasicJsonType, typename CompatibleNumberIntegerType, typename = void>
+struct is_compatible_number_integer_type
+    : is_compatible_integer_type<typename BasicJsonType::number_integer_t, CompatibleNumberIntegerType> {};
+
+// if number_unsigned_t is the same type as number_integer_t, unsigned integers
+// are stored as number_integer as well (#2573)
+template<typename BasicJsonType, typename CompatibleNumberIntegerType>
+struct is_compatible_number_integer_type < BasicJsonType, CompatibleNumberIntegerType,
+           enable_if_t < std::is_same<typename BasicJsonType::number_integer_t, typename BasicJsonType::number_unsigned_t>::value&&
+           std::is_integral<CompatibleNumberIntegerType>::value&&
+           std::is_unsigned<CompatibleNumberIntegerType>::value&&
+           !std::is_same<bool, CompatibleNumberIntegerType>::value >>
+           : std::is_constructible<typename BasicJsonType::number_integer_t, CompatibleNumberIntegerType> {};
+
 template<typename BasicJsonType, typename CompatibleType, typename = void>
 struct is_compatible_type_impl: std::false_type {};

@@ -5019,6 +5040,27 @@ constexpr bool value_in_range_of(T val)
 template<bool Value>
 using bool_constant = std::integral_constant<bool, Value>;

+// Stands in for number_unsigned_t in overload sets if it is the same type as
+// number_integer_t, so that the unsigned overloads do not collide with the
+// integer ones. Never constructed. Such a basic_json stores every integer as
+// number_integer (#2573).
+struct same_as_number_integer_type {};
+
+// NumberUnsignedType, or same_as_number_integer_type if it is the same type as
+// NumberIntegerType; basic_json uses this one, as it cannot name its own member
+// types through an incomplete basic_json (MSVC reports a recursive alias, and
+// old GCC versions crash)
+template<typename NumberIntegerType, typename NumberUnsignedType>
+using number_unsigned_overload_type = typename std::conditional <
+                                      std::is_same<NumberIntegerType, NumberUnsignedType>::value,
+                                      same_as_number_integer_type,
+                                      NumberUnsignedType >::type;
+
+// number_unsigned_t of BasicJsonType, or same_as_number_integer_type if it is
+// the same type as number_integer_t
+template<typename BasicJsonType>
+using number_unsigned_overload_t = number_unsigned_overload_type<typename BasicJsonType::number_integer_t, typename BasicJsonType::number_unsigned_t>;
+
 ///////////////////////////////////////////////////////////////////////////////
 // is_c_string
 ///////////////////////////////////////////////////////////////////////////////
@@ -5771,7 +5813,11 @@ void get_arithmetic_value(const BasicJsonType& j, ArithmeticType& val)
    {
        case value_t::number_unsigned:
        {
-            val = static_cast<ArithmeticType>(*j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>());
+            // never null: a basic_json whose number_unsigned_t is number_integer_t
+            // stores no number_unsigned values (#2573)
+            const auto* ptr = j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>();
+            JSON_ASSERT(ptr != nullptr);
+            val = static_cast<ArithmeticType>(*ptr);
            break;
        }
        case value_t::number_integer:
@@ -5841,7 +5887,7 @@ inline void from_json(const BasicJsonType& j, typename BasicJsonType::number_flo
 }

 template<typename BasicJsonType>
-inline void from_json(const BasicJsonType& j, typename BasicJsonType::number_unsigned_t& val)
+inline void from_json(const BasicJsonType& j, number_unsigned_overload_t<BasicJsonType>& val)
 {
    get_arithmetic_value(j, val);
 }
@@ -6097,7 +6143,11 @@ inline void from_json(const BasicJsonType& j, ArithmeticType& val)
    {
        case value_t::number_unsigned:
        {
-            val = static_cast<ArithmeticType>(*j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>());
+            // never null: a basic_json whose number_unsigned_t is number_integer_t
+            // stores no number_unsigned values (#2573)
+            const auto* ptr = j.template get_ptr<const typename BasicJsonType::number_unsigned_t*>();
+            JSON_ASSERT(ptr != nullptr);
+            val = static_cast<ArithmeticType>(*ptr);
            break;
        }
        case value_t::number_integer:
@@ -7245,14 +7295,14 @@ inline void to_json(BasicJsonType& j, FloatType val) noexcept
 }

 template<typename BasicJsonType, typename CompatibleNumberUnsignedType,
-         enable_if_t<is_compatible_integer_type<typename BasicJsonType::number_unsigned_t, CompatibleNumberUnsignedType>::value, int> = 0>
+         enable_if_t<is_compatible_integer_type<number_unsigned_overload_t<BasicJsonType>, CompatibleNumberUnsignedType>::value, int> = 0>
 inline void to_json(BasicJsonType& j, CompatibleNumberUnsignedType val) noexcept
 {
    external_constructor<value_t::number_unsigned>::construct(j, static_cast<typename BasicJsonType::number_unsigned_t>(val));
 }

 template<typename BasicJsonType, typename CompatibleNumberIntegerType,
-         enable_if_t<is_compatible_integer_type<typename BasicJsonType::number_integer_t, CompatibleNumberIntegerType>::value, int> = 0>
+         enable_if_t<is_compatible_number_integer_type<BasicJsonType, CompatibleNumberIntegerType>::value, int> = 0>
 inline void to_json(BasicJsonType& j, CompatibleNumberIntegerType val) noexcept
 {
    external_constructor<value_t::number_integer>::construct(j, static_cast<typename BasicJsonType::number_integer_t>(val));
@@ -7533,7 +7583,7 @@ struct adl_serializer
 };

 NLOHMANN_JSON_NAMESPACE_END
-// IWYU pragma: keep
+// IWYU pragma: export
 // #include <nlohmann/byte_container_with_subtype.hpp>
 //     __ _____ _____ _____
 //  __|  |   __|     |   | |  JSON for Modern C++
@@ -7641,7 +7691,7 @@ class byte_container_with_subtype : public BinaryType
 NLOHMANN_JSON_NAMESPACE_END

 // #include <nlohmann/detail/abi_macros.hpp>
-
+// IWYU pragma: export
 // #include <nlohmann/detail/conversions/from_json.hpp>
 // IWYU pragma: keep
 // #include <nlohmann/detail/conversions/to_json.hpp>
@@ -7963,12 +8013,12 @@ NLOHMANN_JSON_NAMESPACE_END



-#include <algorithm> // min
+#include <algorithm> // count, find, min
 #include <array> // array
 #include <cstddef> // size_t
 #include <cstdint> // uint32_t
 #include <cstring> // strlen
-#include <iterator> // begin, end, iterator_traits, random_access_iterator_tag, distance, next
+#include <iterator> // begin, end, iterator_traits, random_access_iterator_tag, distance, next, reverse_iterator
 #include <streambuf> // streambuf
 #include <string> // string, char_traits
 #include <type_traits> // enable_if, is_base_of, is_pointer, is_integral, remove_pointer
@@ -8257,6 +8307,7 @@ class iterator_input_adapter
            return result;
        }

+        ++eof_reads;
        return char_traits<char_type>::eof();
    }

@@ -8266,6 +8317,26 @@ class iterator_input_adapter
        return static_cast<std::size_t>(std::distance(begin, current));
    }

+    // number of get_character() calls so far, including those that returned
+    // EOF; the lexer derives its position from it (see lexer::lazy_position)
+    std::size_t get_read_count() const
+    {
+        return get_consumed_count() + eof_reads;
+    }
+
+    // number of newlines in the consumed range [0, last_index); @a line_start
+    // is set to the index after the last of them (0 if there is none); only
+    // valid when supports_seek
+    std::size_t count_consumed_lines(std::size_t last_index, std::size_t& line_start) const
+    {
+        const auto to = std::next(begin, static_cast<typename std::iterator_traits<IteratorType>::difference_type>(last_index));
+        const auto newline = char_traits<char_type>::to_char_type('\n');
+        using reverse_it = std::reverse_iterator<IteratorType>;
+        const auto last_newline = std::find(reverse_it(to), reverse_it(begin), newline);
+        line_start = static_cast<std::size_t>(std::distance(begin, last_newline.base()));
+        return static_cast<std::size_t>(std::count(begin, last_newline.base(), newline));
+    }
+
    // append the already-consumed characters in the half-open range
    // [first_index, last_index) to @a out; only valid when supports_seek
    template<typename ContainerType>
@@ -8382,6 +8453,8 @@ class iterator_input_adapter
    IteratorType begin;
    IteratorType current;
    SentinelType end;
+    /// number of get_character() calls that returned EOF
+    std::size_t eof_reads = 0;

    template<typename BaseInputAdapter, size_t T>
    friend struct wide_string_input_helper;
@@ -8902,30 +8975,6 @@ NLOHMANN_JSON_NAMESPACE_END
 #include <utility> // move
 #include <vector> // vector

-// #include <nlohmann/detail/input/input_adapters.hpp>
-
-// #include <nlohmann/detail/input/number_parse.hpp>
-//     __ _____ _____ _____
-//  __|  |   __|     |   | |  JSON for Modern C++
-// |  |  |__   |  |  | | | |  version 3.12.0
-// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
-//
-// SPDX-FileCopyrightText: 2021 The fast_float authors <https://github.com/fastfloat/fast_float>
-// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
-// SPDX-License-Identifier: MIT
-
-
-
-#include <array> // array
-#include <cfloat> // FLT_EVAL_METHOD
-#include <clocale> // localeconv
-#include <cstddef> // size_t
-#include <cstdint> // int64_t, uint64_t
-#include <cstdlib> // strtof, strtod, strtold
-#include <cstring> // memcpy
-#include <limits> // numeric_limits
-#include <string> // string
-
 // #include <nlohmann/detail/bit_ops.hpp>
 //     __ _____ _____ _____
 //  __|  |   __|     |   | |  JSON for Modern C++
@@ -8972,6 +9021,25 @@ inline int count_leading_zeros(std::uint64_t x) noexcept
 #endif
 }

+/// number of trailing zero bits of x (x != 0)
+inline int count_trailing_zeros(std::uint64_t x) noexcept
+{
+#if defined(__GNUC__) || defined(__clang__)
+    return __builtin_ctzll(x);
+#else
+    int n = 0;
+    for (int shift = 32; shift != 0; shift >>= 1)
+    {
+        if ((x << (64 - shift)) == 0)
+        {
+            n += shift;
+            x >>= shift;
+        }
+    }
+    return n;
+#endif
+}
+
 /// the 128-bit product of two 64-bit numbers
 struct uint128_parts
 {
@@ -9019,6 +9087,33 @@ inline std::uint64_t read_eight_bytes(const char* p) noexcept
 }  // namespace detail
 NLOHMANN_JSON_NAMESPACE_END

+// #include <nlohmann/detail/input/input_adapters.hpp>
+
+// #include <nlohmann/detail/input/number_parse.hpp>
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2021 The fast_float authors <https://github.com/fastfloat/fast_float>
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+
+
+#include <array> // array
+#include <cfloat> // FLT_EVAL_METHOD
+#include <clocale> // localeconv
+#include <cstddef> // size_t
+#include <cstdint> // int64_t, uint64_t
+#include <cstdlib> // strtof, strtod, strtold
+#include <cstring> // memcpy
+#include <limits> // numeric_limits
+#include <string> // string
+#include <type_traits> // is_signed, true_type, false_type
+
+// #include <nlohmann/detail/bit_ops.hpp>
+
 // #include <nlohmann/detail/input/pow5_table.hpp>
 //     __ _____ _____ _____
 //  __|  |   __|     |   | |  JSON for Modern C++
@@ -9417,6 +9512,20 @@ NLOHMANN_JSON_NAMESPACE_BEGIN
 namespace detail
 {

+// whether an integer of a signed type is negative; the overload for other types
+// avoids comparing an unsigned value with zero
+template<typename NumberType>
+constexpr bool is_negative_integer(NumberType x, std::true_type /*is_signed*/) noexcept
+{
+    return x < 0;
+}
+
+template<typename NumberType>
+constexpr bool is_negative_integer(NumberType /*unused*/, std::false_type /*is_signed*/) noexcept
+{
+    return false;
+}
+
 /*!
@brief fast integer parser for an already-validated unsigned integer

@@ -9450,8 +9559,10 @@ bool parse_integer_unsigned(const char* first, const char* last, NumberUnsignedT
        x = (x * 10u) + digit;
    }
    value = static_cast<NumberUnsignedType>(x);
-    // reject values that do not round-trip into a narrower NumberUnsignedType
-    return static_cast<std::uint64_t>(value) == x;
+    // reject values that do not round-trip into a narrower NumberUnsignedType,
+    // and values that wrap around to negative numbers if it is a signed type
+    // (number_unsigned_t may be the same type as number_integer_t, #2573)
+    return static_cast<std::uint64_t>(value) == x && !is_negative_integer(value, std::is_signed<NumberUnsignedType>());
 }

 /*!
@@ -10584,6 +10695,15 @@ class lexer : public lexer_base<BasicJsonType>
    static constexpr bool lazy_token_string =
        input_adapter_supports_seek<InputAdapterType>(is_detected<detect_supports_seek, InputAdapterType> {});

+    /// whether the read position is derived from the input adapter on demand
+    /// instead of being counted on every scanned character. Seekable adapters
+    /// know how much input they consumed and can revisit it, so
+    /// chars_read_total is the adapter's read count (minus a pending unget),
+    /// and line and column are recomputed from the consumed input only when
+    /// get_position() is called (errors). Counting per character kept two
+    /// increments and a newline check in the hot path of every get().
+    static constexpr bool lazy_position = lazy_token_string;
+
    /// whether a simulated unget can be passed on to the input adapter, which
    /// then leaves the character in the input; see
    /// input_adapter_supports_lookahead
@@ -10593,7 +10713,9 @@ class lexer : public lexer_base<BasicJsonType>
    /// whether string scanning may bulk-consume runs of ordinary characters
    /// directly from a contiguous input buffer (SWAR fast path). This requires
    /// the token to be reconstructible lazily (lazy_token_string), so bypassing
-    /// the per-character capture in get() cannot lose error diagnostics.
+    /// the per-character capture in get() cannot lose error diagnostics. It
+    /// also implies lazy_position, so the bulk paths need not advance the
+    /// position counters.
    static constexpr bool bulk_scan =
        lazy_token_string
        && input_adapter_supports_bulk_scan<InputAdapterType>(is_detected<detect_supports_bulk_scan, InputAdapterType> {});
@@ -10729,10 +10851,6 @@ class lexer : public lexer_base<BasicJsonType>
        }
        token_buffer.append(reinterpret_cast<const typename string_t::value_type*>(data), pos);
        ia.bulk_skip(pos);
-        // the run contains no newline (all bytes < 0x20 are treated as special),
-        // so only the flat character counters advance
-        position.chars_read_total += pos;
-        position.chars_read_current_line += pos;
    }

    /// streaming input: no bulk fast path
@@ -11965,8 +12083,6 @@ scan_number_done:
            if (JSON_HEDLEY_LIKELY(integer_result != token_type::uninitialized))
            {
                ia.bulk_skip(len - 1);
-                position.chars_read_total += (len - 1);
-                position.chars_read_current_line += (len - 1);
                return integer_result;
            }
            // The value does not fit an integer, so this token converts as a
@@ -11983,8 +12099,6 @@ scan_number_done:
        decimal_point_position = dot_index;

        ia.bulk_skip(len - 1);
-        position.chars_read_total += (len - 1);
-        position.chars_read_current_line += (len - 1);

        return convert_number(number_type, mantissa_end);
    }
@@ -12035,7 +12149,7 @@ scan_number_done:

 #if JSON_DIAGNOSTIC_POSITIONS
        // the first character of the token has already been read, hence the -1
-        token_start_position = position.chars_read_total - 1;
+        token_start_position = get_chars_read_total() - 1;
 #endif

        note_token_start(std::integral_constant<bool, lazy_token_string> {});
@@ -12088,6 +12202,15 @@ scan_number_done:
    /// per-character position counters (line-count-on-'\n' bookkeeping is
    /// handled afterwards, in track_after_read(), once `current` is known)
    void advance_position() noexcept
+    {
+        advance_position_impl(std::integral_constant<bool, lazy_position> {});
+    }
+
+    /// seekable adapter: the position is derived from the adapter on demand
+    void advance_position_impl(std::true_type /*lazy*/) const noexcept {}
+
+    /// streaming adapter: count the character
+    void advance_position_impl(std::false_type /*lazy*/) noexcept
    {
        ++position.chars_read_total;
        ++position.chars_read_current_line;
@@ -12101,7 +12224,16 @@ scan_number_done:
        // seekable adapters reconstruct the token lazily on error (see
        // get_token_string), so the eager per-character copy is skipped
        capture_char(std::integral_constant<bool, lazy_token_string> {});
+        track_newline(std::integral_constant<bool, lazy_position> {});
+        return current;
+    }

+    /// seekable adapter: lines are counted on demand in get_position()
+    void track_newline(std::true_type /*lazy*/) const noexcept {}
+
+    /// streaming adapter: start a new line after reading a newline
+    void track_newline(std::false_type /*lazy*/) noexcept
+    {
        if (current == '\n')
        {
            ++position.lines_read;
@@ -12110,8 +12242,6 @@ scan_number_done:
            chars_read_before_newline = position.chars_read_current_line;
            position.chars_read_current_line = 0;
        }
-
-        return current;
    }

    /*!
@@ -12155,12 +12285,22 @@ scan_number_done:
    We implement unget by setting variable next_unget to true. The input is not
    changed - we just simulate ungetting by modifying chars_read_total,
    chars_read_current_line, and token_string. The next call to get() will
-    behave as if the unget character is read again.
+    behave as if the unget character is read again. With lazy_position, the
+    pending next_unget is all get_chars_read_total() needs.
    */
    void unget()
    {
        next_unget = true;
+        unget_position(std::integral_constant<bool, lazy_position> {});
+        uncapture_char(std::integral_constant<bool, lazy_token_string> {});
+    }

+    /// seekable adapter: get_chars_read_total() accounts for next_unget
+    void unget_position(std::true_type /*lazy*/) const noexcept {}
+
+    /// streaming adapter: step the counters back over the ungotten character
+    void unget_position(std::false_type /*lazy*/) noexcept
+    {
        --position.chars_read_total;

        // in case we "unget" a newline, we have to also decrement the lines_read
@@ -12183,8 +12323,6 @@ scan_number_done:
        {
            --position.chars_read_current_line;
        }
-
-        uncapture_char(std::integral_constant<bool, lazy_token_string> {});
    }

    /// adapter without lookahead: nothing to do (see release_lookahead)
@@ -12255,10 +12393,21 @@ scan_number_done:
    // diagnostics
    /////////////////////

-    /// return position of last read token
-    constexpr position_t get_position() const noexcept
+    /*!
+    @brief return the number of characters read so far
+
+    Unlike get_position(), this is O(1) for all adapters, so it may be called
+    for every value (JSON_DIAGNOSTIC_POSITIONS).
+    */
+    std::size_t get_chars_read_total() const noexcept
    {
-        return position;
+        return get_chars_read_total_impl(std::integral_constant<bool, lazy_position> {});
+    }
+
+    /// return position of last read token
+    position_t get_position() const
+    {
+        return get_position_impl(std::integral_constant<bool, lazy_position> {});
    }

    /*!
@@ -12295,6 +12444,43 @@ scan_number_done:
    }
 #endif

+  private:
+    /// seekable adapter: every get() either read from the adapter (including
+    /// reads at EOF, which get() counts as characters as well) or replayed an
+    /// ungotten character, so the count is the adapter's read count minus a
+    /// still pending unget
+    std::size_t get_chars_read_total_impl(std::true_type /*lazy*/) const noexcept
+    {
+        return ia.get_read_count() - (next_unget ? 1u : 0u);
+    }
+
+    /// streaming adapter: the counter is maintained by get() and unget()
+    std::size_t get_chars_read_total_impl(std::false_type /*lazy*/) const noexcept
+    {
+        return position.chars_read_total;
+    }
+
+    /// seekable adapter: count the lines in the consumed input; O(input read
+    /// so far), but only called on errors
+    position_t get_position_impl(std::true_type /*lazy*/) const
+    {
+        position_t result;
+        result.chars_read_total = get_chars_read_total();
+        // reads at EOF count as characters but are not part of the input
+        const std::size_t consumed = (std::min)(result.chars_read_total, ia.get_consumed_count());
+        std::size_t line_start = 0;
+        result.lines_read = ia.count_consumed_lines(consumed, line_start);
+        result.chars_read_current_line = result.chars_read_total - line_start;
+        return result;
+    }
+
+    /// streaming adapter: the position is maintained by get() and unget()
+    position_t get_position_impl(std::false_type /*lazy*/) const noexcept
+    {
+        return position;
+    }
+
+  public:
    /// seekable adapter: rebuild the last read token from the input on demand
    const std::vector<char_type>& collect_token_chars(std::vector<char_type>& out, std::true_type /*lazy*/) const
    {
@@ -12402,15 +12588,57 @@ scan_number_done:
        // into one that reloads the pointer from memory every character
        do
        {
+            if (current == '\n')
+            {
+                skip_indentation(std::integral_constant<bool, bulk_scan> {});
+            }
            get_ignoring_pending_unget();
        }
        while (current_is_whitespace());
    }

+    /*!
+    @brief contiguous input: skip the space indentation that follows a newline
+           8 bytes at a time
+
+    Pretty-printed JSON indents every line with a run of spaces, which the loop
+    in skip_whitespace() would otherwise read one character at a time. The
+    spaces are skipped 8 bytes at a time; the last 7 bytes of the input and any
+    other whitespace are left to that loop. Skipping bypasses get(), which is
+    fine because bulk_scan implies lazy_position: the position is derived from
+    the adapter, not counted per character.
+    */
+    void skip_indentation(std::true_type /*bulk*/)
+    {
+        JSON_ASSERT(!next_unget);
+        const std::size_t remaining = ia.bulk_remaining();
+        if (remaining < 8)
+        {
+            return;
+        }
+        const char* const data = reinterpret_cast<const char*>(ia.bulk_data());
+        std::size_t pos = 0;
+        for (; pos + 8 <= remaining; pos += 8)
+        {
+            // little-endian, so the first byte is the lowest
+            const std::uint64_t non_space = read_eight_bytes(data + pos) ^ 0x2020202020202020ull;
+            if (non_space != 0)
+            {
+                // skip the spaces before the first other byte of this word
+                pos += static_cast<std::size_t>(count_trailing_zeros(non_space)) / 8;
+                break;
+            }
+        }
+        ia.bulk_skip(pos);
+    }
+
+    /// streaming input: no bulk fast path
+    void skip_indentation(std::false_type /*bulk*/) const noexcept {}
+
    token_type scan()
    {
        // initially, skip the BOM
-        if (position.chars_read_total == 0 && !skip_bom())
+        if (get_chars_read_total() == 0 && !skip_bom())
        {
            error_message = "invalid BOM; must be 0xEF 0xBB 0xBF if given";
            return token_type::parse_error;
@@ -12437,7 +12665,7 @@ scan_number_done:
    token_type scan_expecting(token_type expected_type)
    {
        JSON_ASSERT(expected_type == token_type::name_separator || expected_type == token_type::value_separator);
-        JSON_ASSERT(position.chars_read_total > 0);
+        JSON_ASSERT(get_chars_read_total() > 0);
        const char_int_type expected_char = static_cast<unsigned char>((expected_type == token_type::name_separator) ? ':' : ',');
        skip_whitespace();
        if (JSON_HEDLEY_LIKELY(current == expected_char))
@@ -12791,7 +13019,7 @@ struct diagnostic_positions
        {
            // Lexer has read the first character of the container, so
            // subtract 1 from the position to get the correct start position.
-            v.start_position = lexer->get_position() - 1;
+            v.start_position = lexer->get_chars_read_total() - 1;
        }
    }

@@ -12805,7 +13033,7 @@ struct diagnostic_positions
        if (lexer)
        {
            // Lexer's position is past the closing brace or bracket, so set that as the end position.
-            v.end_position = lexer->get_position();
+            v.end_position = lexer->get_chars_read_total();
        }
    }

@@ -12821,7 +13049,7 @@ struct diagnostic_positions
            // Lexer has read past the current field value, so set the end position to the current position.
            // The start position will be set below based on the length of the string representation
            // of the value.
-            v.end_position = lexer->get_position();
+            v.end_position = lexer->get_chars_read_total();

            switch (v.type())
            {
@@ -18664,7 +18892,7 @@ class parser
                    }
                    case token_type::end_of_input:
                    {
-                        if (JSON_HEDLEY_UNLIKELY(m_lexer.get_position().chars_read_total == 1))
+                        if (JSON_HEDLEY_UNLIKELY(m_lexer.get_chars_read_total() == 1))
                        {
                            return syntax_error(*sax, "attempting to parse an empty input; check that your input string or stream contains the expected JSON");
                        }
@@ -18814,8 +19042,10 @@ class parser
    {
        // MSVC 2015 reports C4100 (unreferenced parameter) when SAX::parse_error is static
        static_cast<void>(sax);
-        return sax.parse_error(m_lexer.get_position(), m_lexer.get_token_string(),
-                               parse_error::create(exception_id::syntax_error, m_lexer.get_position(), message, nullptr));
+        // computing the position is O(input read so far) for seekable input
+        const position_t position = m_lexer.get_position();
+        return sax.parse_error(position, m_lexer.get_token_string(),
+                               parse_error::create(exception_id::syntax_error, position, message, nullptr));
    }

    std::string exception_message(const token_type expected, const std::string& context)
@@ -21410,9 +21640,9 @@ class json_ref

 }  // namespace detail
 NLOHMANN_JSON_NAMESPACE_END
-
+// IWYU pragma: export
 // #include <nlohmann/detail/macro_scope.hpp>
-
+// IWYU pragma: export
 // #include <nlohmann/detail/meta/detected.hpp>

 // #include <nlohmann/detail/string_concat.hpp>
@@ -21954,7 +22184,7 @@ class binary_writer

            case value_t::number_unsigned:
            {
-                write_cbor_head(0x00, j.m_data.m_value.number_unsigned);
+                write_cbor_head(0x00, conditional_static_cast<std::uint64_t>(j.m_data.m_value.number_unsigned));
                break;
            }

@@ -23334,7 +23564,7 @@ class binary_writer
                return calc_bson_integer_size(j.m_data.m_value.number_integer);

            case value_t::number_unsigned:
-                return calc_bson_unsigned_size(j.m_data.m_value.number_unsigned);
+                return calc_bson_unsigned_size(conditional_static_cast<std::uint64_t>(j.m_data.m_value.number_unsigned));

            case value_t::string:
                return calc_bson_string_size(*j.m_data.m_value.string, j);
@@ -23376,7 +23606,7 @@ class binary_writer
                return write_bson_integer(name, j.m_data.m_value.number_integer);

            case value_t::number_unsigned:
-                return write_bson_unsigned(name, j.m_data.m_value.number_unsigned);
+                return write_bson_unsigned(name, conditional_static_cast<std::uint64_t>(j.m_data.m_value.number_unsigned));

            case value_t::string:
                return write_bson_string(name, *j.m_data.m_value.string);
@@ -26196,6 +26426,12 @@ class serializer
    using number_float_t = typename BasicJsonType::number_float_t;
    using number_integer_t = typename BasicJsonType::number_integer_t;
    using number_unsigned_t = typename BasicJsonType::number_unsigned_t;
+    /// type of the absolute value of an integer: number_unsigned_t, or its
+    /// unsigned counterpart if it is signed (it may be number_integer_t, #2573)
+    using number_magnitude_t = typename std::conditional <
+                               std::is_integral<number_unsigned_t>::value && std::is_signed<number_unsigned_t>::value,
+                               std::make_unsigned<number_unsigned_t>,
+                               std::enable_if<true, number_unsigned_t >>::type::type;
    using binary_char_t = typename BasicJsonType::binary_t::value_type;

  public:
@@ -27374,7 +27610,7 @@ class serializer
    @param[in] x  unsigned integer number to count its digits
    @return    number of decimal digits
    */
-    unsigned int count_digits(number_unsigned_t x) noexcept
+    unsigned int count_digits(number_magnitude_t x) noexcept
    {
        unsigned int n_digits = 1;
        for (;;)
@@ -27552,7 +27788,7 @@ class serializer
        // use a pointer to fill the buffer
        auto buffer_ptr = number_buffer.begin(); // NOLINT(llvm-qualified-auto,readability-qualified-auto)

-        number_unsigned_t abs_value;
+        number_magnitude_t abs_value;

        unsigned int n_chars{};

@@ -27566,7 +27802,7 @@ class serializer
        }
        else
        {
-            abs_value = static_cast<number_unsigned_t>(x);
+            abs_value = static_cast<number_magnitude_t>(x);
            n_chars = count_digits(abs_value);
        }

@@ -27709,17 +27945,6 @@ class serializer
        }
    }

-    /*
-     * Overload to make the compiler happy while it is instantiating
-     * dump_integer for number_unsigned_t.
-     * Must never be called.
-     */
-    number_unsigned_t remove_sign(number_unsigned_t x)
-    {
-        JSON_ASSERT(false); // NOLINT(cert-dcl03-c,hicpp-static-assert,misc-static-assert) LCOV_EXCL_LINE
-        return x; // LCOV_EXCL_LINE
-    }
-
    /*
     * Helper function for dump_integer
     *
@@ -27729,10 +27954,10 @@ class serializer
     * absolute values of INT_MIN and INT_MAX are usually not the same. See
     * #1708 for details.
     */
-    number_unsigned_t remove_sign(number_integer_t x) noexcept
+    number_magnitude_t remove_sign(number_integer_t x) noexcept
    {
        JSON_ASSERT(x < 0);
-        return static_cast<number_unsigned_t>(-(x + 1)) + 1;
+        return static_cast<number_magnitude_t>(-(x + 1)) + 1;
    }

  private:
@@ -27776,7 +28001,7 @@ NLOHMANN_JSON_NAMESPACE_END
 // #include <nlohmann/detail/value_t.hpp>

 // #include <nlohmann/json_fwd.hpp>
-
+// IWYU pragma: export
 // #include <nlohmann/ordered_map.hpp>
 //     __ _____ _____ _____
 //  __|  |   __|     |   | |  JSON for Modern C++
@@ -28616,8 +28841,22 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
                  "NumberUnsignedType must be at least as wide as NumberIntegerType, "
                  "because it has to hold the absolute value of every NumberIntegerType value");

+    // NumberUnsignedType may be the same type as NumberIntegerType (#2573), but
+    // a repeated NumberFloatType would give overloads that collide, so it gets
+    // a readable diagnostic instead.
+    static_assert(!std::is_same<NumberFloatType, NumberIntegerType>::value && !std::is_same<NumberFloatType, NumberUnsignedType>::value,
+                  "NumberFloatType must be a different type than NumberIntegerType and NumberUnsignedType");
+
  private:

+    /// the kind a value of kind @a t is stored as: if number_unsigned_t is the
+    /// same type as number_integer_t, every integer is stored as number_integer
+    /// (#2573); every other kind is stored as itself
+    static constexpr value_t stored_kind(const value_t t) noexcept
+    {
+        return (std::is_same<number_integer_t, number_unsigned_t>::value && t == value_t::number_unsigned) ? value_t::number_integer : t;
+    }
+
    /// helper for exception-safe object creation
    template<typename T, typename... Args>
    JSON_HEDLEY_RETURNS_NON_NULL
@@ -28691,8 +28930,8 @@ class basic_json // NOLINT(cppcoreguidelines-special-member-functions,hicpp-spec
        json_value(boolean_t v) noexcept : boolean(v) {}
        /// constructor for numbers (integer)
        json_value(number_integer_t v) noexcept : number_integer(v) {}
-        /// constructor for numbers (unsigned)
-        json_value(number_unsigned_t v) noexcept : number_unsigned(v) {}
+        /// constructor for numbers (unsigned); takes a placeholder if number_unsigned_t is number_integer_t
+        json_value(detail::number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType> v) noexcept : number_unsigned(v) {}
        /// constructor for numbers (floating-point)
        json_value(number_float_t v) noexcept : number_float(v) {}
        /// constructor for empty values of a given type
@@ -30297,7 +30536,7 @@ public:
    /// @brief create an empty value with a given type
    /// @sa https://json.nlohmann.me/api/basic_json/basic_json/
    basic_json(const value_t v)
-        : m_data(v)
+        : m_data(stored_kind(v))
    {
        assert_invariant();
    }
@@ -30378,7 +30617,7 @@ public:
        {
            convert_leaf(val);
        }
-        JSON_ASSERT(m_data.m_type == val.type());
+        JSON_ASSERT(m_data.m_type == stored_kind(val.type()));

        set_parents();
        assert_invariant();
@@ -30963,14 +31202,16 @@ public:
        return m_data.m_type == value_t::number_integer ? &m_data.m_value.number_integer : nullptr;
    }

-    /// get a pointer to the value (unsigned number)
-    number_unsigned_t* get_impl_ptr(number_unsigned_t* /*unused*/) noexcept
+    /// get a pointer to the value (unsigned number); takes a placeholder if
+    /// number_unsigned_t is number_integer_t (the integer overload handles it then)
+    number_unsigned_t* get_impl_ptr(detail::number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType>* /*unused*/) noexcept
    {
        return is_number_unsigned() ? &m_data.m_value.number_unsigned : nullptr;
    }

-    /// get a pointer to the value (unsigned number)
-    constexpr const number_unsigned_t* get_impl_ptr(const number_unsigned_t* /*unused*/) const noexcept
+    /// get a pointer to the value (unsigned number); takes a placeholder if
+    /// number_unsigned_t is number_integer_t (the integer overload handles it then)
+    constexpr const number_unsigned_t* get_impl_ptr(const detail::number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType>* /*unused*/) const noexcept
    {
        return is_number_unsigned() ? &m_data.m_value.number_unsigned : nullptr;
    }
@@ -35570,6 +35811,176 @@ public:
    }

  public:
+    /// @brief creates a diff as a JSON Merge Patch
+    /// @sa https://json.nlohmann.me/api/basic_json/merge_diff/
+    JSON_HEDLEY_WARN_UNUSED_RESULT
+    static basic_json merge_diff(const basic_json& source, const basic_json& target)
+    {
+        // unless both are objects, the patch is the target itself
+        if (!source.is_object() || !target.is_object())
+        {
+            return target;
+        }
+
+        return merge_diff_recursively(source, target, 0);
+    }
+
+  private:
+    /// @brief two objects @ref merge_diff_iteratively is diffing
+    struct merge_diff_frame
+    {
+        merge_diff_frame(const basic_json* source_, const basic_json* target_)
+            : source(source_), target(target_), member(source_->cbegin()), patch(value_t::object)
+        {}
+
+        // declared for GCC's -Weffc++, as in diff_frame
+        merge_diff_frame(const merge_diff_frame&) = default;
+        merge_diff_frame(merge_diff_frame&&) = default;
+        merge_diff_frame& operator=(const merge_diff_frame&) = default;
+        merge_diff_frame& operator=(merge_diff_frame&&) = default;
+        ~merge_diff_frame() = default;
+
+        /// the objects being diffed
+        const basic_json* source;
+        const basic_json* target;
+        /// the member of source being diffed; advanced once it is done
+        const_iterator member;
+        /// the patch for the members of source diffed so far
+        basic_json patch;
+    };
+
+    /// @brief add the members of object @a target that @a source does not
+    ///        have to the merge patch @a result
+    static void merge_diff_added_members(basic_json& result, const basic_json& source, const basic_json& target)
+    {
+        for (auto it = target.begin(); it != target.end(); ++it)
+        {
+            auto itf = source.find(it.key());
+            if (itf == source.end())
+            {
+                result[it.key()] = it.value();
+            }
+        }
+    }
+
+    /*!
+    @brief @ref merge_diff of two objects at nesting level @a depth
+
+    Diffing two nested objects calls this function again, once per nesting
+    level, so values nested deeply enough would exhaust the call stack and
+    terminate the process. The descent is bounded here: once @ref
+    detail::recursion_depth_limit levels have been entered, @ref
+    merge_diff_iteratively diffs what is left without the call stack.
+    */
+    static basic_json merge_diff_recursively(const basic_json& source, const basic_json& target, const std::size_t depth)
+    {
+        JSON_ASSERT(source.is_object() && target.is_object());
+
+        if (JSON_HEDLEY_UNLIKELY(depth >= detail::recursion_depth_limit()))
+        {
+            return merge_diff_iteratively(source, target);
+        }
+
+        basic_json result(value_t::object);
+
+        for (auto it = source.begin(); it != source.end(); ++it)
+        {
+            auto itf = target.find(it.key());
+            if (itf != target.end())
+            {
+                if (it.value().is_object() && itf.value().is_object())
+                {
+                    auto diff = merge_diff_recursively(it.value(), itf.value(), depth + 1);
+                    if (!diff.empty())
+                    {
+                        result[it.key()] = std::move(diff);
+                    }
+                }
+                else if (it.value() != itf.value())
+                {
+                    result[it.key()] = itf.value();
+                }
+            }
+            else
+            {
+                result[it.key()] = value_t::null;
+            }
+        }
+
+        merge_diff_added_members(result, source, target);
+        return result;
+    }
+
+    /*!
+    @brief @ref merge_diff of two objects without the call stack
+
+    Produces the same patch as @ref merge_diff_recursively, keeping the objects
+    being diffed on an explicit stack instead of descending into them. Two
+    nested objects are still diffed completely before the next member, so the
+    patch has its members in the same order as in the recursive version. Only
+    reached for objects nested more deeply than @ref
+    detail::recursion_depth_limit.
+    */
+    static basic_json merge_diff_iteratively(const basic_json& source, const basic_json& target)
+    {
+        // the patch of source and target, set once their frame is popped
+        basic_json result;
+        std::vector<merge_diff_frame> stack;
+        stack.emplace_back(&source, &target);
+        while (!stack.empty())
+        {
+            // the frame's members are copied out and it is changed through
+            // stack.back(): pushing a frame for nested objects or popping
+            // this one would invalidate a reference to it
+            const basic_json* const s = stack.back().source;
+            const basic_json* const t = stack.back().target;
+            const const_iterator it = stack.back().member;
+
+            if (it != s->cend())
+            {
+                const const_iterator itf = t->find(it.key());
+                if (itf != t->cend())
+                {
+                    if (it.value().is_object() && itf.value().is_object())
+                    {
+                        // member is advanced once their patch is under its key
+                        stack.emplace_back(&it.value(), &itf.value());
+                        continue;
+                    }
+                    if (it.value() != itf.value())
+                    {
+                        stack.back().patch[it.key()] = itf.value();
+                    }
+                }
+                else
+                {
+                    stack.back().patch[it.key()] = value_t::null;
+                }
+                ++stack.back().member;
+                continue;
+            }
+
+            merge_diff_added_members(stack.back().patch, *s, *t);
+
+            // these objects are done: continue with the ones they are in
+            basic_json patch = std::move(stack.back().patch);
+            stack.pop_back();
+            if (stack.empty())
+            {
+                result = std::move(patch);
+            }
+            else
+            {
+                if (!patch.empty())
+                {
+                    stack.back().patch[stack.back().member.key()] = std::move(patch);
+                }
+                ++stack.back().member;
+            }
+        }
+        return result;
+    }
+
    /// @}
 };

@@ -36039,7 +36450,7 @@ NLOHMANN_JSON_NAMESPACE_END
 #undef NLOHMANN_JSON_LITERAL_OPERATOR

 #endif  // INCLUDE_NLOHMANN_JSON_LITERALS_HPP_
-
+// IWYU pragma: export
 #endif

 #endif  // INCLUDE_NLOHMANN_JSON_HPP_
@@ -0,0 +1,62 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+// See values.cpp: the conversion macros and nlohmann::adl_serializer must be available through
+// <nlohmann/json.hpp> alone. NLOHMANN_JSON_SERIALIZE_ENUM (from the same header as
+// NLOHMANN_DEFINE_TYPE_INTRUSIVE) is left out: IWYU attributes the basic_json comparison in its
+// expansion to an unrelated standard header, the ambiguity described for json.hpp in cmake/ci.cmake.
+
+#include <string>
+
+#include <nlohmann/json.hpp>
+
+namespace ns
+{
+struct person
+{
+    std::string name;
+    int age;
+    NLOHMANN_DEFINE_TYPE_INTRUSIVE(person, name, age)
+};
+
+struct legacy
+{
+    int value;
+};
+} // namespace ns
+
+namespace nlohmann
+{
+template<>
+struct adl_serializer<ns::legacy>
+{
+    static void to_json(json& j, const ns::legacy& l)
+    {
+        j = l.value;
+    }
+
+    static void from_json(const json& j, ns::legacy& l)
+    {
+        l.value = j.get<int>();
+    }
+};
+} // namespace nlohmann
+
+int main()
+{
+    ns::person ada;
+    ada.name = "Ada";
+    ada.age = 36;
+    ns::legacy one;
+    one.value = 1;
+
+    const nlohmann::json j = ada;
+    const auto p = j.get<ns::person>();
+    const auto l = nlohmann::json(one).get<ns::legacy>();
+    return p.age - 36 + l.value - 1;
+}
@@ -0,0 +1,19 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+// See values.cpp: the user-defined literals must be available through <nlohmann/json.hpp> alone.
+
+#include <nlohmann/json.hpp>
+
+using namespace nlohmann::literals; // NOLINT(google-build-using-namespace)
+
+int main()
+{
+    const auto j = R"({"a": [1, 2]})"_json;
+    return j.at("/a/1"_json_pointer).get<int>() - 2;
+}
@@ -0,0 +1,30 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+// Uses the library the way a client does, including only <nlohmann/json.hpp>. ci_single_binaries
+// runs include-what-you-use and clang-tidy's misc-include-cleaner on this file and fails if either
+// asks for another nlohmann header, which would mean json.hpp does not export it (issue #5812).
+
+#include <cstdint>
+#include <string>
+#include <vector>
+
+#include <nlohmann/json.hpp>
+
+int main()
+{
+    // brace initialization (nlohmann::json, detail::json_ref)
+    nlohmann::json j = {{"pi", 3.141}, {"list", {1, 0, 2}}};
+    const nlohmann::ordered_json o = {{"b", 1}, {"a", 2}};
+
+    j["parsed"] = nlohmann::json::parse(R"({"happy": true})");
+    j["binary"] = nlohmann::json::binary(std::vector<std::uint8_t> {0xCA, 0xFE}, 42);
+
+    const std::string s = j.dump() + o.dump();
+    return s.empty() ? 1 : 0;
+}
@@ -938,6 +938,10 @@ TEST_CASE("Eisel-Lemire float conversion")
            const int k = i % 64;
            const std::uint64_t x = (std::uint64_t{1} << k) | (a & ((std::uint64_t{1} << k) - 1));
            CHECK(nlohmann::detail::count_leading_zeros(x) == 63 - k);
+
+            // the mirror image: bit k set, arbitrary bits above it
+            const std::uint64_t y = (std::uint64_t{1} << k) | (k == 63 ? 0 : (a << (k + 1)));
+            CHECK(nlohmann::detail::count_trailing_zeros(y) == k);
        }
    }

@@ -8,6 +8,13 @@

 #include "doctest_compatibility.h"

+// capture whether JSON_DISABLE_ENUM_SERIALIZATION was enabled on the command
+// line before including json.hpp, which #undefs it; std::byte is an enum, so
+// converting std::vector<std::byte> needs enum serialization
+#if defined(JSON_DISABLE_ENUM_SERIALIZATION) && (JSON_DISABLE_ENUM_SERIALIZATION == 1)
+    #define SKIP_TESTS_FOR_ENUM_SERIALIZATION
+#endif
+
 #include <nlohmann/json.hpp>

 #include <cstdint>
@@ -85,3 +92,53 @@ TEST_CASE("binary type whose value type is not std::uint8_t")
    }
 #endif
 }
+
+#ifdef JSON_HAS_CPP_17
+// moved from unit-regression3.cpp, so that file does not instantiate a second
+// basic_json specialization (MinGW section limit, see windows.yml)
+TEST_CASE("std::vector<std::byte> as binary type")
+{
+    SECTION("issue #4804: from_cbor incompatible with std::vector<std::byte> as binary_t")
+    {
+        const std::vector<std::uint8_t> data = {0x80};
+        const auto decoded = byte_binary_json::from_cbor(data);
+        CHECK((decoded == byte_binary_json::array()));
+    }
+
+#ifndef SKIP_TESTS_FOR_ENUM_SERIALIZATION
+    SECTION("discussion #4209 - custom BinaryType direct assignment and round-tripping")
+    {
+        // Test that assigning a custom BinaryType directly creates a binary value, not an array
+        const std::vector<std::byte> original{std::byte{1}, std::byte{2}, std::byte{3}};
+        const byte_binary_json j = original;
+        CHECK(j.is_binary());
+        CHECK(!j.is_array());
+
+        // Test round-tripping: extracting the binary value back as the custom container type
+        const auto extracted = j.get<std::vector<std::byte>>();
+        CHECK(extracted == original);
+
+        // Test that the default json alias behavior is unchanged: std::vector<uint8_t> -> array
+        const nlohmann::json default_json = std::vector<std::uint8_t> {1, 2, 3};
+        CHECK(default_json.is_array());
+        CHECK(!default_json.is_binary());
+    }
+
+    SECTION("discussion #4209 - custom BinaryType extraction from parsed array")
+    {
+        // Test that extracting a custom BinaryType from a parsed JSON array still works
+        // (not just from a binary-typed node)
+        const auto j = byte_binary_json::parse("[1,2,3]");
+        CHECK(j.is_array());
+        CHECK(!j.is_binary());
+
+        // Extracting as custom BinaryType should work from arrays
+        const auto extracted = j.get<std::vector<std::byte>>();
+        CHECK(extracted.size() == 3);
+        CHECK(extracted[0] == std::byte{1});
+        CHECK(extracted[1] == std::byte{2});
+        CHECK(extracted[2] == std::byte{3});
+    }
+#endif
+}
+#endif
@@ -35,6 +35,7 @@ using nlohmann::json;
 #include <sstream>
 #include <string>
 #include <valarray>
+#include <vector>

 #include "sax_event_loggers.hpp"

@@ -1250,3 +1251,139 @@ TEST_CASE_TEMPLATE("deserialization of different character types (UTF-32)", T, c
    CHECK(json::sax_parse(v, &l));
    CHECK(l.events.size() == 1);
 }
+
+namespace
+{
+// records the position and message of a parse error; reporting the error via
+// SAX does not throw, so the test also runs with JSON_NOEXCEPTION
+struct SaxErrorRecorder : public SaxEventLogger
+{
+    bool parse_error(std::size_t position, const std::string& /*last_token*/, const json::exception& ex) override
+    {
+        error = std::to_string(position) + " " + ex.what();
+        return false;
+    }
+
+    std::string error {}; // NOLINT(readability-redundant-member-init)
+};
+} // namespace
+
+TEST_CASE("parse error positions are the same for contiguous and stream input")
+{
+    // contiguous input derives the position from the input on error, stream
+    // input counts it while reading (see lexer::lazy_position); the cases
+    // cover newlines before the error, ungetting a newline after a number,
+    // newlines inside a string, a comment, and reads at the end of input
+    struct test_case
+    {
+        std::string input;
+        std::size_t byte;
+        std::string message;
+    };
+    const std::vector<test_case> cases =
+    {
+        {"[\n  1,\n  2\n", 12, "[json.exception.parse_error.101] parse error at line 4, column 1: syntax error while parsing array - unexpected end of input; expected ']'"},
+        {"[1\n,2,\n]", 8, "[json.exception.parse_error.101] parse error at line 3, column 1: syntax error while parsing value - unexpected ']'; expected '[', '{', or a literal"},
+        {"[1\n x]", 5, "[json.exception.parse_error.101] parse error at line 2, column 2: syntax error while parsing array - invalid literal; last read: '1<U+000A> x'; expected ']'"},
+        {"1\n2", 3, "[json.exception.parse_error.101] parse error at line 2, column 1: syntax error while parsing value - unexpected number literal; expected end of input"},
+        {
+            "{\"a\":\n\"b\nc\"}", 9, R"([json.exception.parse_error.101] parse error at line 3, column 0: syntax error while parsing value - invalid string: control character U+000A (LF) must be escaped to \u000A or \n; last read: '"b<U+000A>')"
+        },
+        {"/* a\n b */\n x", 13, "[json.exception.parse_error.101] parse error at line 3, column 2: syntax error while parsing value - invalid literal; last read: '/* a<U+000A> b */<U+000A> x'"},
+        {"\n\n", 3, "[json.exception.parse_error.101] parse error at line 3, column 1: syntax error while parsing value - unexpected end of input; expected '[', '{', or a literal"},
+        {"[\"a\",\n 1e\n]", 10, "[json.exception.parse_error.101] parse error at line 3, column 0: syntax error while parsing value - invalid number; expected '+', '-', or digit after exponent; last read: '1e<U+000A>'"},
+        {"[tru\n]", 5, "[json.exception.parse_error.101] parse error at line 2, column 0: syntax error while parsing value - invalid literal; last read: '[tru<U+000A>'"},
+    };
+
+    for (const auto& c : cases)
+    {
+        CAPTURE(c.input)
+        const std::string expected = std::to_string(c.byte) + " " + c.message;
+
+        SaxErrorRecorder string_sax;
+        CHECK_FALSE(json::sax_parse(c.input, &string_sax, json::input_format_t::json, true, true));
+        CHECK(string_sax.error == expected);
+
+        SaxErrorRecorder pointer_sax;
+        CHECK_FALSE(json::sax_parse(c.input.data(), c.input.data() + c.input.size(), &pointer_sax, json::input_format_t::json, true, true));
+        CHECK(pointer_sax.error == expected);
+
+        std::istringstream is(c.input);
+        SaxErrorRecorder stream_sax;
+        CHECK_FALSE(json::sax_parse(is, &stream_sax, json::input_format_t::json, true, true));
+        CHECK(stream_sax.error == expected);
+    }
+}
+
+#if !defined(JSON_NOEXCEPTION)
+TEST_CASE("indentation runs of every length around the 8-byte skip")
+{
+    // contiguous input skips the spaces after a newline 8 bytes at a time (see
+    // lexer::skip_indentation), stream input reads them one by one; results,
+    // byte offsets, and messages must be the same for runs that end anywhere
+    // relative to a word boundary, including at the end of the input
+    const auto parse_result = [](const std::string & input, bool contiguous)
+    {
+        try
+        {
+            if (contiguous)
+            {
+                return json::parse(input.data(), input.data() + input.size(), nullptr, true, true).dump();
+            }
+            std::istringstream is(input);
+            return json::parse(is, nullptr, true, true).dump();
+        }
+        catch (const json::parse_error& e)
+        {
+            return std::to_string(e.byte).append(" ").append(e.what());
+        }
+    };
+
+    // replace every '~' in a pattern by an indentation run
+    const auto indented = [](const std::string & pattern, const std::string & indent)
+    {
+        std::string result;
+        for (const char c : pattern)
+        {
+            if (c == '~')
+            {
+                result += indent;
+            }
+            else
+            {
+                result += c;
+            }
+        }
+        return result;
+    };
+
+    const std::vector<std::string> patterns =
+    {
+        "[\n~1,\n~2\n]",
+        "[\n~1,\n~x]",
+        "[\n~1,\n~",
+        "1\n~",
+        "[\n~\t1,\n~\r\n~2]",
+        "[\n~/* c */ 1]",
+        "[\n~1\n~2]",
+    };
+
+    for (std::size_t n = 0; n <= 33; ++n)
+    {
+        const std::string indent(n, ' ');
+        for (const auto& pattern : patterns)
+        {
+            const std::string input = indented(pattern, indent);
+            CAPTURE(n)
+            CAPTURE(input)
+            const std::string expected = parse_result(input, false);
+            CHECK(parse_result(input, true) == expected);
+            CHECK(json::accept(input.data(), input.data() + input.size(), true) == json::accept(input, true));
+        }
+    }
+
+    // and against fixed expectations, in case both paths broke the same way
+    CHECK(parse_result(indented("[\n~x]", std::string(16, ' ')), true) == "19 [json.exception.parse_error.101] parse error at line 2, column 17: syntax error while parsing value - invalid literal; last read: '[<U+000A>                x'");
+    CHECK(parse_result(indented("[\n~1]", std::string(17, ' ')), true) == "[1]");
+}
+#endif
@@ -567,9 +567,9 @@ TEST_CASE("Regression tests for extended diagnostics")
    }
 }

-TEST_CASE("Better diagnostics past the descent bound of update() and merge_patch()")
+TEST_CASE("Better diagnostics past the descent bound of update(), merge_patch() and merge_diff()")
 {
-    // Both merge objects nested more than detail::recursion_depth_limit()
+    // All three handle objects nested more than detail::recursion_depth_limit()
    // (128) levels deep without recursing; the values they add or replace
    // there must still know their parents.
    // The values are built rather than parsed, so that the expected messages
@@ -615,4 +615,19 @@ TEST_CASE("Better diagnostics past the descent bound of update() and merge_patch
        CHECK_THROWS_WITH_AS(p->at("x").at(0), expected_x.c_str(), json::type_error);
        CHECK_THROWS_WITH_AS(p->at("y").at(0), expected_y.c_str(), json::type_error);
    }
+
+    SECTION("merge_diff()")
+    {
+        // target and patch differ only in their innermost members, so the
+        // diff of the two is nested as deeply: {"a": ... {"x": null, "y": 2}}
+        const json diff = json::merge_diff(target, patch); // NOLINT(readability-suspicious-call-argument)
+
+        const json* p = &diff;
+        for (std::size_t i = 0; i < depth; ++i)
+        {
+            p = &p->at("a");
+        }
+        CHECK(p->at("x").is_null());
+        CHECK_THROWS_WITH_AS(p->at("y").at(0), expected_y.c_str(), json::type_error);
+    }
 }
@@ -58,11 +58,6 @@ using ordered_json = nlohmann::ordered_json;
        #include <optional>
    #elif __has_include(<experimental/optional>)
    #endif
-
-    /////////////////////////////////////////////////////////////////////
-    // for #4804
-    /////////////////////////////////////////////////////////////////////
-    using json_4804 = nlohmann::json::with_binary_t<std::vector<std::byte>>;
 #endif

 #ifdef JSON_HAS_CPP_20
@@ -458,49 +453,6 @@ TEST_CASE("regression tests 3")
 #endif

 #ifdef JSON_HAS_CPP_17
-    SECTION("issue #4804: from_cbor incompatible with std::vector<std::byte> as binary_t")
-    {
-        const std::vector<std::uint8_t> data = {0x80};
-        const auto decoded = json_4804::from_cbor(data);
-        CHECK((decoded == json_4804::array()));
-    }
-
-#ifndef SKIP_TESTS_FOR_ENUM_SERIALIZATION
-    SECTION("discussion #4209 - custom BinaryType direct assignment and round-tripping")
-    {
-        // Test that assigning a custom BinaryType directly creates a binary value, not an array
-        const std::vector<std::byte> original{std::byte{1}, std::byte{2}, std::byte{3}};
-        const json_4804 j = original;
-        CHECK(j.is_binary());
-        CHECK(!j.is_array());
-
-        // Test round-tripping: extracting the binary value back as the custom container type
-        const auto extracted = j.get<std::vector<std::byte>>();
-        CHECK(extracted == original);
-
-        // Test that the default json alias behavior is unchanged: std::vector<uint8_t> -> array
-        const json default_json = std::vector<std::uint8_t> {1, 2, 3};
-        CHECK(default_json.is_array());
-        CHECK(!default_json.is_binary());
-    }
-
-    SECTION("discussion #4209 - custom BinaryType extraction from parsed array")
-    {
-        // Test that extracting a custom BinaryType from a parsed JSON array still works
-        // (not just from a binary-typed node)
-        const auto j = json_4804::parse("[1,2,3]");
-        CHECK(j.is_array());
-        CHECK(!j.is_binary());
-
-        // Extracting as custom BinaryType should work from arrays
-        const auto extracted = j.get<std::vector<std::byte>>();
-        CHECK(extracted.size() == 3);
-        CHECK(extracted[0] == std::byte{1});
-        CHECK(extracted[1] == std::byte{2});
-        CHECK(extracted[2] == std::byte{3});
-    }
-#endif
-
    SECTION("issue #5046 - implicit conversion of return json to std::optional no longer implicit")
    {
        const json jval{};
@@ -0,0 +1,201 @@
+//     __ _____ _____ _____
+//  __|  |   __|     |   | |  JSON for Modern C++ (supporting code)
+// |  |  |__   |  |  | | | |  version 3.12.0
+// |_____|_____|_____|_|___|  https://github.com/nlohmann/json
+//
+// SPDX-FileCopyrightText: 2013-2026 Niels Lohmann <https://nlohmann.me>
+// SPDX-License-Identifier: MIT
+
+#include "doctest_compatibility.h"
+
+#include <nlohmann/json.hpp>
+
+#include <cstdint>
+#include <functional>
+#include <limits>
+#include <string>
+#include <vector>
+
+// basic_json with the same type for number_integer_t and number_unsigned_t
+// (#2573): every integer is stored as number_integer
+
+namespace
+{
+
+template<typename IntegerType>
+using same_types_json = nlohmann::json::with_integers_t<IntegerType, IntegerType>;
+
+using json64 = same_types_json<std::int64_t>;
+using json32 = same_types_json<std::int32_t>;
+
+} // namespace
+
+TEST_CASE_TEMPLATE("same type for number_integer_t and number_unsigned_t", Json, json64, json32)
+{
+    using integer_t = typename Json::number_integer_t;
+    using limits = std::numeric_limits<integer_t>;
+
+    SECTION("parsing stores integers as number_integer")
+    {
+        const Json j = Json::parse("[0, 1, -1, 2147483647, -2147483648]");
+        for (const auto& element : j)
+        {
+            CHECK(element.is_number_integer());
+            CHECK(!element.is_number_unsigned());
+            CHECK(element.type() == nlohmann::detail::value_t::number_integer);
+        }
+        CHECK(j[1].template get<integer_t>() == 1);
+        CHECK(j[2].template get<integer_t>() == -1);
+        CHECK(j[3].template get<integer_t>() == 2147483647);
+        CHECK(j[4].template get<std::int64_t>() == -2147483648LL);
+    }
+
+    SECTION("integers above the maximum are parsed as floats")
+    {
+        // a positive literal is parsed as unsigned first; it must not wrap
+        // around to a negative number_integer_t
+        const auto above_max = std::to_string(static_cast<std::uint64_t>(limits::max()) + 1);
+        const Json j1 = Json::parse(above_max);
+        CHECK(j1.is_number_float());
+        CHECK(j1.template get<double>() == static_cast<double>(static_cast<std::uint64_t>(limits::max()) + 1));
+
+        const Json j2 = Json::parse("18446744073709551615");
+        CHECK(j2.is_number_float());
+        CHECK(j2.template get<double>() == 18446744073709551615.0);
+
+        const Json j3 = Json::parse(std::to_string(limits::max()));
+        CHECK(j3.is_number_integer());
+        CHECK(j3.template get<integer_t>() == limits::max());
+    }
+
+    SECTION("serialization of the extremes")
+    {
+        CHECK(Json(limits::max()).dump() == std::to_string(limits::max()));
+        // the absolute value of the minimum does not fit into number_unsigned_t
+        CHECK(Json(limits::min()).dump() == std::to_string(limits::min()));
+        CHECK(Json::parse(std::to_string(limits::min())) == Json(limits::min()));
+        CHECK(Json(0).dump() == "0");
+    }
+
+    SECTION("construction from unsigned types")
+    {
+        const Json j1 = 5u;
+        CHECK(j1.is_number_integer());
+        CHECK(!j1.is_number_unsigned());
+        CHECK(j1 == 5);
+
+        const Json j2 = static_cast<std::uint8_t>(200);
+        CHECK(j2.is_number_integer());
+        CHECK(j2.template get<integer_t>() == 200);
+
+        const Json j3 = std::vector<unsigned> {1, 2, 3};
+        CHECK(j3.dump() == "[1,2,3]");
+        CHECK(j3[0].is_number_integer());
+
+        const Json j4 = true;
+        CHECK(j4.is_boolean());
+    }
+
+    SECTION("value_t::number_unsigned creates a number_integer")
+    {
+        const Json j(nlohmann::detail::value_t::number_unsigned);
+        CHECK(j.is_number_integer());
+        CHECK(!j.is_number_unsigned());
+        CHECK(j == 0);
+        CHECK(j.dump() == "0");
+    }
+
+    SECTION("conversions")
+    {
+        Json j = 42;
+        CHECK(j.template get<unsigned>() == 42u);
+        CHECK(j.template get<std::uint64_t>() == 42u);
+        CHECK(j.template get<int>() == 42);
+        CHECK(j.template get<double>() == 42.0);
+        CHECK(j.template get_ptr<integer_t*>() != nullptr);
+        CHECK(*j.template get_ptr<integer_t*>() == 42);
+        CHECK(j.template get_ref<integer_t&>() == 42);
+        j.template get_ref<integer_t&>() = 43;
+        CHECK(j == 43);
+
+        integer_t i = 0;
+        j.get_to(i);
+        CHECK(i == 43);
+
+        const Json object = {{"a", 1}};
+        CHECK(object.value("a", 0u) == 1u);
+        CHECK(object.value("b", 7u) == 7u);
+    }
+
+    SECTION("conversion from a basic_json with distinct types")
+    {
+        const nlohmann::json j = {1, 2u, -3, 4.5};
+        CHECK(j[1].is_number_unsigned());
+        const Json converted = j;
+        CHECK(converted.dump() == "[1,2,-3,4.5]");
+        CHECK(converted[1].is_number_integer());
+        CHECK(!converted[1].is_number_unsigned());
+
+        const nlohmann::json back = converted;
+        CHECK(back == j);
+    }
+
+    SECTION("comparison and hashing")
+    {
+        const Json j1 = 1;
+        const Json j2 = 2u;
+        CHECK(j1 < j2);
+        CHECK(j1 != j2);
+        CHECK(j2 == 2);
+        CHECK(j2 == 2u);
+        CHECK(j1 < 1.5);
+        CHECK(Json(-1) < Json(0u));
+        CHECK(std::hash<Json> {}(Json(5u)) == std::hash<Json> {}(Json(5)));
+    }
+
+    SECTION("JSON Patch, diff, and flatten")
+    {
+        const Json source = Json::parse(R"({"a": [1, 2, 3], "b": 4})");
+        const Json target = Json::parse(R"({"a": [1, 5], "c": 6})");
+        CHECK(source.patch(Json::diff(source, target)) == target);
+        CHECK(source.flatten().unflatten() == source);
+    }
+
+    SECTION("binary formats")
+    {
+        const Json j = {{"min", limits::min()}, {"max", limits::max()}, {"zero", 0}, {"small", 100}, {"negative", -100}, {"float", 1.5}};
+
+        CHECK(Json::from_cbor(Json::to_cbor(j)) == j);
+        CHECK(Json::from_msgpack(Json::to_msgpack(j)) == j);
+        CHECK(Json::from_ubjson(Json::to_ubjson(j)) == j);
+        CHECK(Json::from_bjdata(Json::to_bjdata(j)) == j);
+        CHECK(Json::from_bson(Json::to_bson(j)) == j);
+        CHECK(Json::from_bon8(Json::to_bon8(j)) == j);
+
+        for (const auto& element : Json::from_cbor(Json::to_cbor(j)))
+        {
+            CHECK(!element.is_number_unsigned());
+        }
+
+        // CBOR unsigned integer 2^64-1 does not fit and is read as float
+        const std::vector<std::uint8_t> cbor_max = {0x1B, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+        const Json from_cbor = Json::from_cbor(cbor_max);
+        CHECK(from_cbor.is_number_float());
+        CHECK(from_cbor.template get<double>() == 18446744073709551615.0);
+
+        // MessagePack uint 8 is read as number_integer
+        const std::vector<std::uint8_t> msgpack_uint8 = {0xCC, 0xC8};
+        const Json from_msgpack = Json::from_msgpack(msgpack_uint8);
+        CHECK(from_msgpack.is_number_integer());
+        CHECK(from_msgpack == 200);
+    }
+}
+
+TEST_CASE("same type for number_integer_t and number_unsigned_t: type traits")
+{
+    CHECK(std::is_same<nlohmann::detail::number_unsigned_overload_t<json64>, nlohmann::detail::same_as_number_integer_type>::value);
+    CHECK(std::is_same<nlohmann::detail::number_unsigned_overload_t<nlohmann::json>, std::uint64_t>::value);
+    CHECK(nlohmann::detail::is_compatible_number_integer_type<json64, unsigned>::value);
+    CHECK(!nlohmann::detail::is_compatible_number_integer_type<nlohmann::json, unsigned>::value);
+    CHECK(!nlohmann::detail::is_compatible_number_integer_type<json64, bool>::value);
+}
Author	SHA1	Message	Date
Niels Lohmann	d5e51d03c0	Fix CI: name the unsigned overload type through template parameters basic_json used number_unsigned_overload_t<basic_json> while the class was still incomplete. MSVC rejected it as a recursive alias declaration and GCC 4.9, 5 and 7 crashed with an internal compiler error. basic_json now uses number_unsigned_overload_type<NumberIntegerType, NumberUnsignedType>, which also makes the GCC 5 workaround in the patch test unnecessary. Infer reported a null dereference for the number_unsigned case in from_json, which cannot happen for a basic_json whose number_unsigned_t is number_integer_t; assert it. Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-10-14 08:41:58 +02:00
Niels Lohmann	ffa987ac40	✅ skip patch test on GCC 5 to avoid internal compiler error Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-10-13 21:18:20 +02:00
Niels Lohmann	735a20e36d	Use json::with_integers_t in the test and the docs Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-10-13 18:57:59 +02:00
Niels Lohmann	45b837885e	Allow the same type for number_integer_t and number_unsigned_t basic_json did not compile with NumberUnsignedType == NumberIntegerType because overloads on both types collided. Such a basic_json now stores every integer as number_integer: the colliding overloads take a placeholder type, unsigned C++ integers are converted to number_integer_t, and value_t::number_unsigned maps to number_integer. Also fixes two problems this configuration would hit: the unsigned integer parser accepted values that wrap around to negative numbers, and dump() overflowed when computing the absolute value of the minimum. A repeated NumberFloatType gets a static_assert. Refs #2573 Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-10-13 18:57:07 +02:00
Niels Lohmann	e839bbd1c0	Export client-facing headers from json.hpp for IWYU / include-cleaner, and check clients in CI (#5813 ) * Mark json_fwd.hpp as exported by json.hpp for IWYU / include-cleaner json_fwd.hpp is the only header declaring the nlohmann::json alias, so include-what-you-use and clang-tidy's misc-include-cleaner attributed the name to it and told users of <nlohmann/json.hpp> to include json_fwd.hpp as well (or instead, which breaks compilation). Fixes #5812 Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Export the remaining client-facing headers from json.hpp and check clients with IWYU Besides json_fwd.hpp, include analyzers also told clients of <nlohmann/json.hpp> to include detail/json_ref.hpp (brace initialization), json_literals.hpp (_json, _json_pointer), adl_serializer.hpp, detail/macro_scope.hpp (NLOHMANN_DEFINE_*) and detail/abi_macros.hpp. Mark those includes as exported, too. ci_single_binaries only checked each header on its own, so it could not notice this. It now also runs IWYU and clang-tidy's misc-include-cleaner on small client programs in tests/iwyu_consumer, which fail on develop. With the exports, json_literals.hpp no longer gets the json_fwd.hpp suggestion that kept it out of the IWYU gate, so it is gated again. Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-10-13 17:17:15 +02:00
Niels Lohmann	aa9620fb15	Skip the indentation after a newline 8 bytes at a time (#5810 ) Pretty-printed JSON indents every line with a run of spaces, which skip_whitespace() read one character at a time. For contiguous input (bulk_scan) the lexer now skips the spaces after a newline 8 bytes at a time directly in the input buffer, including the leading spaces of the last, partial word. This bypasses get(), which is safe because bulk_scan implies the lazy position from the previous commit: nothing is counted per character. Compared to lazy positions alone, pretty-printed input (twitter, citm_catalog with indent 2 and 4) parses up to 13% faster and accept() gets up to 30% faster (GCC 13 and clang 18 on x86-64, Apple clang 21 on arm64). Minified input is unchanged within noise. Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-10-13 17:16:52 +02:00
Niels Lohmann	f23830b65e	Derive the lexer position lazily for seekable input (#5809 ) * Derive the lexer position lazily for seekable input The lexer counted the read position on every character: two increments and a newline check per get(), all on members kept in memory. For seekable input (pointers, strings, other random-access byte ranges) the position can be derived instead: chars_read_total is the adapter's read count (including reads at EOF) minus a pending unget, and line and column are recomputed from the consumed input only when get_position() is called, i.e. on parse errors. JSON_DIAGNOSTIC_POSITIONS uses the new O(1) get_chars_read_total(). Stream, file, wide-string and user-defined adapters keep the eager counters. Parsing pretty-printed input gets 8-12% faster and accept() 12-27% (canada, citm_catalog, twitter; clang 21 arm64 and GCC 13 x86-64). Error messages, byte offsets, SAX positions and diagnostic positions are unchanged (differential comparison against develop on 548k inputs). Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Move the std::vector<std::byte> binary type tests out of unit-regression3 The #4804/#4209 tests instantiated a second basic_json specialization (with_binary_t<std::vector<std::byte>>), including its parser and CBOR reader. With clang 18, the C++20 object of unit-regression3.cpp had 32656 COFF sections on develop; the lazy position helpers pushed it to 32975, past what the MinGW linker of the Windows clang jobs handles ("relocation truncated to fit: IMAGE_REL_AMD64_REL32 against .rdata"). unit-custom-binary-type.cpp already instantiates the same type, so the tests move there; unit-regression3.cpp drops to 27616 sections. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Report the parse errors of the position test via SAX The test caught json::parse_error, so it aborted in the ci_test_noexceptions build, where JSON_NOEXCEPTION turns the throw into std::abort(). sax_parse() hands the error position and the exception object to parse_error() without throwing, so the test now records them there and runs in every configuration. Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me>	2026-10-13 17:16:52 +02:00
satelliteprogrammer	40a62947d3	support JSON Merge Patch (RFC 7396) diff creation (#4965 ) * support JSON Merge Patch (RFC 7396) diff creation The JSON merge patch document format describes the set of modifications to a resource's content, that more closely mimics the syntax of the resource being modified. However, and in contrast to JSON Patch (RFC 6902), a JSON Merge Patch cannot express certain modifications, e.g., changing an array element at a specific index, or setting a specific object value to null. The null value in a JSON Merge Patch is used to remove the key from the object. The diff algorithm is not part of the RFC 7396, but it was tested against all examples provided, plus additional cases on how null values are handled. Signed-off-by: Luís Murta <luis@murta.dev> * improve algorithm efficiency Signed-off-by: Luís Murta <luis@murta.dev> * fix inconsistent nulls and empty arrays Also add CHECKs for the patch, documentation and run `make amalgamate`. Signed-off-by: Luís Murta <luis@murta.dev> * documentation cleanups Signed-off-by: Luís Murta <luis@murta.dev> * add an iterative fallback to merge_diff Bound the recursion depth like diff() and merge_patch(), and test values nested past the bound. Signed-off-by: Luís Murta <luis@murta.dev> * address the remaining review comments Signed-off-by: Luís Murta <luis@murta.dev> * move multi-line raw strings out of CHECK macros GCC 4.8/5, ICPC and NVHPC mis-tokenize multi-line raw string literals inside macro arguments, breaking the build or the parsed JSON. Signed-off-by: Luís Murta <luis@murta.dev> --------- Signed-off-by: Luís Murta <luis@murta.dev>	2026-10-12 09:33:43 +02:00