Create TUF-GAMING-X570-PLUS.conf

This is actually a config for TUF GAMING X570-PLUS (Wi-Fi) but I'm
quite sure these two motherboards share sensors configuration.

[olysonek: reformatted description, replaced the config with the
 version from
 https://github.com/lm-sensors/lm-sensors/pull/216#issuecomment-589585372]

configs/Asus/TUF-GAMING-X570-PLUS.conf

@@ -0,0 +1,61 @@
+chip "nct6798-*"
+# nct6798 values for Asus TUF GAMING X570-PLUS (WI-FI)
+# I'm not entirely sure everything here is correct since no HW monitoring
+# application under Windows shows all the names for all the found sensors.
+# Some of the names and formulas are best guesstimates and could be wrong.
+# You will have to unignore fans if you want them to be monitored.
+
+label in0 "Vcore"
+    set in0_min 0.2
+    set in0_max 1.5
+
+label in2 "AVSB"
+    set in2_min  3.3 * 0.95
+    set in2_max  3.3 * 1.05
+
+label in3 "3VCC"
+    set in3_min  3.3 * 0.95
+    set in3_max  3.3 * 1.05
+
+label in4 "+12V"
+    compute in4 @ * 12, @ / 12
+    set in4_min  12 * 0.95
+    set in4_max  12 * 1.05
+
+label in6 "+5V"
+    compute in6 @ * 5, @ / 5
+    set in6_min  5 * 0.95
+    set in6_max  5 * 1.05
+
+label in7 "3.3V"
+    set in7_min  3.3 * 0.95
+    set in7_max  3.3 * 1.05
+
+label in8 "Vbat"
+    set in8_min  3.3 * 0.95
+    set in8_max  3.3 * 1.05
+
+# always shows a constant value after boot - either 0.272 or 0.288
+ignore in10
+
+# constant 0.544
+ignore in11
+
+# constant 1.032
+ignore in12
+
+label fan2 "CPU Fan"
+    set fan2_min 200
+
+# The X570 chipset is quite power hungry, so let's put 1000 in to be safe
+label fan5 "CHA_FAN1"
+    set fan5_min 1000
+
+# Always show zeros
+ignore temp8
+ignore temp9
+ignore temp10
+
+# The motherboard doesn't seem to have them physically connected or present
+ignore intrusion0
+ignore intrusion1