Make it clear that the gl518sm "iterate" trick is gone in the

Linux 2.6 driver (ticket #1767).


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2681 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Jean Delvare committed 2004-08-31 18:53:01 +00:00
1 parent 657ffe4e9c
commit 474d9b8bf1
2 files changed
+16 -3

No files matched your search

+9 -3
View File
@@ -786,7 +786,10 @@ chip "gl518sm-*"
# IMPORTANT: in0, in1, and in2 values (+5, +3, and +12) CANNOT be read
# unless you use the slow 'iterate' method. Limits will still
# work even when iterate=0. See ../doc/chips/gl518sm.
# work even when iterate=0. See doc/chips/gl518sm.
# Note that the 'iterate' method was trimmed while porting the
# driver to Linux 2.6 as we considered it too ugly for the thin
# benefit.
#
# Factors and labels taken from GL518SM datasheet, they seem to give
# reasonable values with EISCA connected Fan78
@@ -809,8 +812,11 @@ chip "gl518sm-*"
set vin2_max 13.0
set vin3_min 2.10
set vin3_max 2.30
set fan1_off 0
set fan2_min 0
# set fan1_off 0
# set fan2_min 0
# Do NOT uncomment the following line with the Linux 2.6 kernel driver,
# as it'll raise an error.
# set iterate 2