Support the Linux 2.6 lm92 driver.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2919 7894878c-1315-0410-8ee3-d5d059ff63e0

etc/sensors.conf.eg

@@ -2270,3 +2270,18 @@ chip "adm1031-*"
 chip "w83l785ts-*"
 
    label temp1 "CPU Diode"
+
+chip "lm92-*"
+
+   label temp "CPU Temp"
+
+# Change limits as you see fit
+#   set temp_low 14
+#   set temp_high 60
+#   set temp_crit 72
+# Hysteresis is computed from critical limit for Linux 2.6,
+# and from high limit for Linux 2.4. That might change in the future.
+# Whatever, the same relative hysteresis is used for all of low, high
+# and critical limits.
+#   set temp_hyst 70 # Linux 2.6
+#   set temp_hyst 58 # Linux 2.4

lib/chips.c

@@ -4747,7 +4747,7 @@ static sensors_chip_feature lm92_features[] =
     { SENSORS_LM92_TEMP_CRIT, "temp_crit", SENSORS_LM92_TEMP, SENSORS_LM92_TEMP,
                        RW, LM92_SYSCTL_TEMP, VALUE(4), 4 },
     { SENSORS_LM92_TEMP_HYST, "temp_hyst", SENSORS_LM92_TEMP, SENSORS_LM92_TEMP,
-                       RW, LM92_SYSCTL_TEMP, VALUE(5), 4 },
+                       RW, LM92_SYSCTL_TEMP, VALUE(5), 4 , "temp1_crit_hyst", 3 },
     { SENSORS_LM92_ALARMS, "alarms", NOMAP, NOMAP,
                        R, LM92_SYSCTL_ALARMS, VALUE(1), 0 },
     { 0 }

lib/proc.c

@@ -487,6 +487,8 @@ int getsysname(const sensors_chip_feature *feature, char *sysname,
 		{ "temp_hyst", "temp1_max_hyst", TEMPMAG },
 		{ "temp_low", "temp1_min", TEMPMAG },
 		{ "temp_over", "temp1_max", TEMPMAG },
+		{ "temp_high", "temp1_max", TEMPMAG },
+		{ "temp_crit", "temp1_crit", TEMPMAG },
 		{ "pwm1", "pwm1", 0, "fan1_pwm" },
 		{ "pwm2", "pwm2", 0, "fan2_pwm" },
 		{ "pwm3", "pwm3", 0, "fan3_pwm" },