mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-17 19:30:26 +00:00
Example documentation for the lm78 and lm75 modules
Very slight formatting changes in documentation generators git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@391 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
1 parent
b5860b65b0
commit
51f328e727
4 files changed
+314
-73
No files matched your search
+24
-3
@@ -9,6 +9,26 @@ Supported chips:
|
||||
Addresses scanned: I2C 0x48 - 0x4f (inclusive)
|
||||
Datasheet: Publicly available at the National Semiconductors website
|
||||
|
||||
Author: Frodo Looijaard <frodol@dds.nl>
|
||||
|
||||
|
||||
Insmod Parameters
|
||||
-----------------
|
||||
|
||||
* force: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to boldly assume to be present
|
||||
* force_lm75: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to contain
|
||||
a `lm75' chip
|
||||
* ignore: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs not to scan
|
||||
* ignore_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples not to scan
|
||||
* probe: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to scan additionally
|
||||
* probe_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples to scan additionally
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
@@ -29,17 +49,18 @@ The LM75 is usually used in combination with LM78-like chips, to measure
|
||||
the temperature of the processor(s).
|
||||
|
||||
|
||||
Configuration file features
|
||||
---------------------------
|
||||
Chip Features
|
||||
-------------
|
||||
|
||||
Chip `lm75'
|
||||
LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE
|
||||
temp NONE NONE R 1
|
||||
temp_hyst temp temp RW 1
|
||||
temp_over temp temp RW 1
|
||||
|
||||
|
||||
LABEL FEATURE SYMBOL SYSCTL FILE:OFFSET
|
||||
temp SENSORS_LM75_TEMP temp:3
|
||||
temp_hyst SENSORS_LM75_TEMP_HYST temp:2
|
||||
temp_over SENSORS_LM75_TEMP_OVER temp:1
|
||||
|
||||
|
||||
+287
-69
@@ -1,16 +1,59 @@
|
||||
Kernel driver `lm78.o'
|
||||
======================
|
||||
|
||||
Prefixes: lm78 (LM78, I2C and ISA)
|
||||
lm78-j (LM78-J, I2C and ISA)
|
||||
lm79 (LM79, I2C and ISA)
|
||||
Status: Complete and well-tested
|
||||
|
||||
Supported chips:
|
||||
* National Semiconductors LM78
|
||||
Prefix `lm78'
|
||||
Addresses scanned: I2C 0x20 - 0x2f (inclusive), ISA 0x290 (8 I/O ports)
|
||||
Datasheet: Publicly available at the National Semiconductors website
|
||||
* National Semiconductors LM78-J
|
||||
Prefix `lm78-j'
|
||||
Addresses scanned: I2C 0x20 - 0x2f (inclusive), ISA 0x290 (8 I/O ports)
|
||||
Datasheet: Publicly available at the National Semiconductors website
|
||||
* National Semiconductors LM79
|
||||
Prefix `lm79'
|
||||
Addresses scanned: I2C 0x20 - 0x2f (inclusive), ISA 0x290 (8 I/O ports)
|
||||
Datasheet: Publicly available at the National Semiconductors website
|
||||
|
||||
Author: Frodo Looijaard <frodol@dds.nl>
|
||||
|
||||
|
||||
Insmod Parameters
|
||||
-----------------
|
||||
|
||||
* force: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to boldly assume to be present
|
||||
* force_lm78: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to contain
|
||||
a `lm78' chip
|
||||
* force_lm78j: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to contain
|
||||
a `lm78j' chip
|
||||
* force_lm79: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to contain
|
||||
a `lm79' chip
|
||||
* ignore: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs not to scan
|
||||
* ignore_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples not to scan
|
||||
* probe: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to scan additionally
|
||||
* probe_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples to scan additionally
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the National Semiconductor LM78, LM78-J
|
||||
and LM79. They are described as `Microprocessor System Hardware Monitors'.
|
||||
|
||||
There is almost no difference between these three chips. Functionally, the
|
||||
LM78 and LM78-J are exactly identical. The LM79 has one more VID line,
|
||||
There is almost no difference between the three supported chips. Functionally,
|
||||
the LM78 and LM78-J are exactly identical. The LM79 has one more VID line,
|
||||
which is used to report the lower voltages newer Pentium processors use.
|
||||
From now on, LM7* means either of these three types.
|
||||
From here on, LM7* means either of these three types.
|
||||
|
||||
The LM7* implements one temperatur sensor, three FAN rotation speed sensors,
|
||||
seven voltage sensors, VID lines, alarms, and some miscellaneous stuff.
|
||||
@@ -19,25 +62,30 @@ Temperatures are measured in degrees Celcius. An alarm is triggered once
|
||||
when the Overtemperature Shutdown limit is crossed; it is triggered again
|
||||
as soon as it drops below the Hysteris value. A more useful behaviour
|
||||
can be found by setting the Hysteris value to +127 degrees Celcius; in
|
||||
this case, alarms are issued during all the time when the actual temperature \
|
||||
is above the Overtemperature Shutdown value.
|
||||
this case, alarms are issued during all the time when the actual temperature
|
||||
is above the Overtemperature Shutdown value. Measurements are guaranteed
|
||||
between -55 and +125 degrees, with a resolution of 1 degree.
|
||||
|
||||
FAN rotation speeds are reported in RPM (rotations per minute). An alarm is
|
||||
triggered if the rotation speed has dropped below a programmable limit. FAN
|
||||
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
|
||||
the readings more range or accuracy. This is imporatant because some FANs
|
||||
the readings more range or accuracy. This is important because some FANs
|
||||
report only one 'tick' each rotation, while others report two - making
|
||||
all readings twice as high. Not all RPM values can accurately be represented,
|
||||
so some rounding is done.
|
||||
so some rounding is done. With a divider of 2, the lowest representable
|
||||
value is around 2600 RPM.
|
||||
|
||||
Voltage sensors (also known as IN sensors) report their values in volts.
|
||||
An alarm is triggered if the voltage has crossed a programmable minimum
|
||||
or maximum limit. Note that minimum in this case always means 'closest to
|
||||
zero'; this is important for negative voltage measurements.
|
||||
zero'; this is important for negative voltage measurements. All voltage
|
||||
inputs can measure voltages between 0 and 4.08 volts, with a resolution
|
||||
of 0.016 volt.
|
||||
|
||||
The VID lines encode the core voltage value: the voltage level your processor
|
||||
should work with. This is hardcoded by the mainboard and/or processor itself.
|
||||
It is a value in volts.
|
||||
It is a value in volts. When it is unconnected, you will often find the
|
||||
value 3.50 V here.
|
||||
|
||||
In addition to the alarms described above, there are a couple of additional
|
||||
ones. There is a BTI alarm, which gets triggered when an external chip has
|
||||
@@ -50,7 +98,7 @@ this condition usually indicates there is a problem with some other
|
||||
device.
|
||||
|
||||
If an alarm triggers, it will remain triggered until the hardware register
|
||||
is read at least once. This means that the cause for the alarm may
|
||||
is read at least once. This means that the cause for the alarm may
|
||||
already have disappeared! Note that in the current implementation, all
|
||||
hardware registers are read whenever any data is read (unless it is less
|
||||
than 1.5 seconds since the last update). This means that you can easily
|
||||
@@ -60,62 +108,232 @@ The LM7* only updates its values each 1.5 seconds; reading it more often
|
||||
will do no harm, but will return 'old' values.
|
||||
|
||||
|
||||
/proc and sysctl interface files:
|
||||
* alarms (LM78_SYSCTL_ALARMS)
|
||||
A single number (R,0) which indicates which alarms are currently
|
||||
triggered. It is a logical OR of the following bit values:
|
||||
LM78_ALARM_BTI, LM78_ALARM_CHAS, LM78_ALARM_FIFO, LM78_ALARM_SMI_IN,
|
||||
LM78_ALARMS_IN[0-6], LM78_ALARM_FAN[1-3], LM78_ALARM_TEMP
|
||||
* fan[1-3] (LM78_SYSCTL_FAN[1-3])
|
||||
The Fan Low Limit (RW,0) and Current Fan Reading (R,0).
|
||||
* fan_div (LM78_SYSCTL_FAN_DIV)
|
||||
The FAN1 Scaling Factor (RW,0), FAN2 Scaling Factor (RW,0) and FAN3 Scaling
|
||||
Factor (RW,0).
|
||||
* in[0-6] (LM78_SYSCTL_IN[0-6])
|
||||
The Voltage Low Limit (RW,2), Voltage High Limit (RW,2) and Current
|
||||
Voltage Reading (R,2).
|
||||
* temp
|
||||
The Overtemperature Shutdown Value (RW,1), Hysteris Value (RW,1) and
|
||||
Current Temperature (R,1).
|
||||
* vid
|
||||
The Core Voltage Value (R,2).
|
||||
Module Parameters
|
||||
-----------------
|
||||
|
||||
Chip `lm78'
|
||||
LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE
|
||||
in0 NONE NONE R 2
|
||||
in1 NONE NONE R 2
|
||||
in2 NONE NONE R 2
|
||||
in3 NONE NONE R 2
|
||||
in4 NONE NONE R 2
|
||||
in5 NONE NONE R 2
|
||||
in6 NONE NONE R 2
|
||||
in0_min in0 in0 RW 2
|
||||
in1_min in1 in1 RW 2
|
||||
in2_min in2 in2 RW 2
|
||||
in3_min in3 in3 RW 2
|
||||
in4_min in4 in4 RW 2
|
||||
in5_min in5 in5 RW 2
|
||||
in6_min in6 in6 RW 2
|
||||
in0_max in0 in0 RW 2
|
||||
in1_max in1 in1 RW 2
|
||||
in2_max in2 in2 RW 2
|
||||
in3_max in3 in3 RW 2
|
||||
in4_max in4 in4 RW 2
|
||||
in5_max in5 in5 RW 2
|
||||
in6_max in6 in6 RW 2
|
||||
fan1 NONE NONE R 0
|
||||
fan2 NONE NONE R 0
|
||||
fan3 NONE NONE R 0
|
||||
fan1_min fan1 fan1 RW 0
|
||||
fan2_min fan2 fan2 RW 0
|
||||
fan3_min fan3 fan3 RW 0
|
||||
temp NONE NONE R 1
|
||||
temp_hyst temp temp RW 1
|
||||
temp_over temp temp RW 1
|
||||
vid NONE NONE R 2
|
||||
fan1_div fan1 NONE RW 0
|
||||
fan2_div fan2 NONE RW 0
|
||||
fan3_div fan3 NONE R 0
|
||||
alarms NONE NONE R 0
|
||||
|
||||
LABEL FEATURE SYMBOL SYSCTL FILE:OFFSET
|
||||
in0 SENSORS_LM78_IN0 in0:3
|
||||
in1 SENSORS_LM78_IN1 in1:3
|
||||
in2 SENSORS_LM78_IN2 in2:3
|
||||
in3 SENSORS_LM78_IN3 in3:3
|
||||
in4 SENSORS_LM78_IN4 in4:3
|
||||
in5 SENSORS_LM78_IN5 in5:3
|
||||
in6 SENSORS_LM78_IN6 in6:3
|
||||
in0_min SENSORS_LM78_IN0_MIN in0:1
|
||||
in1_min SENSORS_LM78_IN1_MIN in1:1
|
||||
in2_min SENSORS_LM78_IN2_MIN in2:1
|
||||
in3_min SENSORS_LM78_IN3_MIN in3:1
|
||||
in4_min SENSORS_LM78_IN4_MIN in4:1
|
||||
in5_min SENSORS_LM78_IN5_MIN in5:1
|
||||
in6_min SENSORS_LM78_IN6_MIN in6:1
|
||||
in0_max SENSORS_LM78_IN0_MAX in0:2
|
||||
in1_max SENSORS_LM78_IN1_MAX in1:2
|
||||
in2_max SENSORS_LM78_IN2_MAX in2:2
|
||||
in3_max SENSORS_LM78_IN3_MAX in3:2
|
||||
in4_max SENSORS_LM78_IN4_MAX in4:2
|
||||
in5_max SENSORS_LM78_IN5_MAX in5:2
|
||||
in6_max SENSORS_LM78_IN6_MAX in6:2
|
||||
fan1 SENSORS_LM78_FAN1 fan1:2
|
||||
fan2 SENSORS_LM78_FAN2 fan2:2
|
||||
fan3 SENSORS_LM78_FAN3 fan3:2
|
||||
fan1_min SENSORS_LM78_FAN1_MIN fan1:1
|
||||
fan2_min SENSORS_LM78_FAN2_MIN fan2:1
|
||||
fan3_min SENSORS_LM78_FAN3_MIN fan3:1
|
||||
temp SENSORS_LM78_TEMP temp:3
|
||||
temp_hyst SENSORS_LM78_TEMP_HYST temp:2
|
||||
temp_over SENSORS_LM78_TEMP_OVER temp:1
|
||||
vid SENSORS_LM78_VID vid:1
|
||||
fan1_div SENSORS_LM78_FAN1_DIV fan_div:1
|
||||
fan2_div SENSORS_LM78_FAN2_DIV fan_div:2
|
||||
fan3_div SENSORS_LM78_FAN3_DIV fan_div:3
|
||||
alarms SENSORS_LM78_ALARMS alarms:1
|
||||
|
||||
|
||||
configuration file features:
|
||||
Chip `lm78-j'
|
||||
LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE
|
||||
in0 NONE NONE R 2
|
||||
in1 NONE NONE R 2
|
||||
in2 NONE NONE R 2
|
||||
in3 NONE NONE R 2
|
||||
in4 NONE NONE R 2
|
||||
in5 NONE NONE R 2
|
||||
in6 NONE NONE R 2
|
||||
in0_min in0 in0 RW 2
|
||||
in1_min in1 in1 RW 2
|
||||
in2_min in2 in2 RW 2
|
||||
in3_min in3 in3 RW 2
|
||||
in4_min in4 in4 RW 2
|
||||
in5_min in5 in5 RW 2
|
||||
in6_min in6 in6 RW 2
|
||||
in0_max in0 in0 RW 2
|
||||
in1_max in1 in1 RW 2
|
||||
in2_max in2 in2 RW 2
|
||||
in3_max in3 in3 RW 2
|
||||
in4_max in4 in4 RW 2
|
||||
in5_max in5 in5 RW 2
|
||||
in6_max in6 in6 RW 2
|
||||
fan1 NONE NONE R 0
|
||||
fan2 NONE NONE R 0
|
||||
fan3 NONE NONE R 0
|
||||
fan1_min fan1 fan1 RW 0
|
||||
fan2_min fan2 fan2 RW 0
|
||||
fan3_min fan3 fan3 RW 0
|
||||
temp NONE NONE R 1
|
||||
temp_hyst temp temp RW 1
|
||||
temp_over temp temp RW 1
|
||||
vid NONE NONE R 2
|
||||
fan1_div fan1 NONE RW 0
|
||||
fan2_div fan2 NONE RW 0
|
||||
fan3_div fan3 NONE R 0
|
||||
alarms NONE NONE R 0
|
||||
|
||||
NAME LABEL CLASS COMPUTE CLASS RW
|
||||
alarms: R
|
||||
fan1: R
|
||||
fan1_div: fan1 RW
|
||||
fan1_min: fan1 RW
|
||||
fan2: R
|
||||
fan2_div: fan2 RW
|
||||
fan2_min: fan2 RW
|
||||
fan3: R
|
||||
fan3_div: fan3 R
|
||||
fan3_min: fan3 RW
|
||||
in0: R
|
||||
in0_max: in0 in0 RW
|
||||
in0_min: in0 in0 RW
|
||||
in1: R
|
||||
in1_max: in1 in1 RW
|
||||
in1_min: in1 in1 RW
|
||||
in2: R
|
||||
in2_max: in2 in2 RW
|
||||
in2_min: in2 in2 RW
|
||||
in3: R
|
||||
in3_max: in3 in3 RW
|
||||
in3_min: in3 in3 RW
|
||||
in4: R
|
||||
in4_max: in4 in4 RW
|
||||
in4_min: in4 in4 RW
|
||||
in5: R
|
||||
in5_max: in5 in5 RW
|
||||
in5_min: in5 in5 RW
|
||||
in6: R
|
||||
in6_max: in6 in6 RW
|
||||
in6_min: in6 in6 RW
|
||||
temp: R
|
||||
temp_hyst: temp temp RW
|
||||
temp_over: temp temp RW
|
||||
vid: R
|
||||
LABEL FEATURE SYMBOL SYSCTL FILE:OFFSET
|
||||
in0 SENSORS_LM78J_IN0 in0:3
|
||||
in1 SENSORS_LM78J_IN1 in1:3
|
||||
in2 SENSORS_LM78J_IN2 in2:3
|
||||
in3 SENSORS_LM78J_IN3 in3:3
|
||||
in4 SENSORS_LM78J_IN4 in4:3
|
||||
in5 SENSORS_LM78J_IN5 in5:3
|
||||
in6 SENSORS_LM78J_IN6 in6:3
|
||||
in0_min SENSORS_LM78J_IN0_MIN in0:1
|
||||
in1_min SENSORS_LM78J_IN1_MIN in1:1
|
||||
in2_min SENSORS_LM78J_IN2_MIN in2:1
|
||||
in3_min SENSORS_LM78J_IN3_MIN in3:1
|
||||
in4_min SENSORS_LM78J_IN4_MIN in4:1
|
||||
in5_min SENSORS_LM78J_IN5_MIN in5:1
|
||||
in6_min SENSORS_LM78J_IN6_MIN in6:1
|
||||
in0_max SENSORS_LM78J_IN0_MAX in0:2
|
||||
in1_max SENSORS_LM78J_IN1_MAX in1:2
|
||||
in2_max SENSORS_LM78J_IN2_MAX in2:2
|
||||
in3_max SENSORS_LM78J_IN3_MAX in3:2
|
||||
in4_max SENSORS_LM78J_IN4_MAX in4:2
|
||||
in5_max SENSORS_LM78J_IN5_MAX in5:2
|
||||
in6_max SENSORS_LM78J_IN6_MAX in6:2
|
||||
fan1 SENSORS_LM78J_FAN1 fan1:2
|
||||
fan2 SENSORS_LM78J_FAN2 fan2:2
|
||||
fan3 SENSORS_LM78J_FAN3 fan3:2
|
||||
fan1_min SENSORS_LM78J_FAN1_MIN fan1:1
|
||||
fan2_min SENSORS_LM78J_FAN2_MIN fan2:1
|
||||
fan3_min SENSORS_LM78J_FAN3_MIN fan3:1
|
||||
temp SENSORS_LM78J_TEMP temp:3
|
||||
temp_hyst SENSORS_LM78J_TEMP_HYST temp:2
|
||||
temp_over SENSORS_LM78J_TEMP_OVER temp:1
|
||||
vid SENSORS_LM78J_VID vid:1
|
||||
fan1_div SENSORS_LM78J_FAN1_DIV fan_div:1
|
||||
fan2_div SENSORS_LM78J_FAN2_DIV fan_div:2
|
||||
fan3_div SENSORS_LM78J_FAN3_DIV fan_div:3
|
||||
alarms SENSORS_LM78J_ALARMS alarms:1
|
||||
|
||||
|
||||
Chip `lm79'
|
||||
LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE
|
||||
in0 NONE NONE R 2
|
||||
in1 NONE NONE R 2
|
||||
in2 NONE NONE R 2
|
||||
in3 NONE NONE R 2
|
||||
in4 NONE NONE R 2
|
||||
in5 NONE NONE R 2
|
||||
in6 NONE NONE R 2
|
||||
in0_min in0 in0 RW 2
|
||||
in1_min in1 in1 RW 2
|
||||
in2_min in2 in2 RW 2
|
||||
in3_min in3 in3 RW 2
|
||||
in4_min in4 in4 RW 2
|
||||
in5_min in5 in5 RW 2
|
||||
in6_min in6 in6 RW 2
|
||||
in0_max in0 in0 RW 2
|
||||
in1_max in1 in1 RW 2
|
||||
in2_max in2 in2 RW 2
|
||||
in3_max in3 in3 RW 2
|
||||
in4_max in4 in4 RW 2
|
||||
in5_max in5 in5 RW 2
|
||||
in6_max in6 in6 RW 2
|
||||
fan1 NONE NONE R 0
|
||||
fan2 NONE NONE R 0
|
||||
fan3 NONE NONE R 0
|
||||
fan1_min fan1 fan1 RW 0
|
||||
fan2_min fan2 fan2 RW 0
|
||||
fan3_min fan3 fan3 RW 0
|
||||
temp NONE NONE R 1
|
||||
temp_hyst temp temp RW 1
|
||||
temp_over temp temp RW 1
|
||||
vid NONE NONE R 2
|
||||
fan1_div fan1 NONE RW 0
|
||||
fan2_div fan2 NONE RW 0
|
||||
fan3_div fan3 NONE R 0
|
||||
alarms NONE NONE R 0
|
||||
|
||||
LABEL FEATURE SYMBOL SYSCTL FILE:OFFSET
|
||||
in0 SENSORS_LM79_IN0 in0:3
|
||||
in1 SENSORS_LM79_IN1 in1:3
|
||||
in2 SENSORS_LM79_IN2 in2:3
|
||||
in3 SENSORS_LM79_IN3 in3:3
|
||||
in4 SENSORS_LM79_IN4 in4:3
|
||||
in5 SENSORS_LM79_IN5 in5:3
|
||||
in6 SENSORS_LM79_IN6 in6:3
|
||||
in0_min SENSORS_LM79_IN0_MIN in0:1
|
||||
in1_min SENSORS_LM79_IN1_MIN in1:1
|
||||
in2_min SENSORS_LM79_IN2_MIN in2:1
|
||||
in3_min SENSORS_LM79_IN3_MIN in3:1
|
||||
in4_min SENSORS_LM79_IN4_MIN in4:1
|
||||
in5_min SENSORS_LM79_IN5_MIN in5:1
|
||||
in6_min SENSORS_LM79_IN6_MIN in6:1
|
||||
in0_max SENSORS_LM79_IN0_MAX in0:2
|
||||
in1_max SENSORS_LM79_IN1_MAX in1:2
|
||||
in2_max SENSORS_LM79_IN2_MAX in2:2
|
||||
in3_max SENSORS_LM79_IN3_MAX in3:2
|
||||
in4_max SENSORS_LM79_IN4_MAX in4:2
|
||||
in5_max SENSORS_LM79_IN5_MAX in5:2
|
||||
in6_max SENSORS_LM79_IN6_MAX in6:2
|
||||
fan1 SENSORS_LM79_FAN1 fan1:2
|
||||
fan2 SENSORS_LM79_FAN2 fan2:2
|
||||
fan3 SENSORS_LM79_FAN3 fan3:2
|
||||
fan1_min SENSORS_LM79_FAN1_MIN fan1:1
|
||||
fan2_min SENSORS_LM79_FAN2_MIN fan2:1
|
||||
fan3_min SENSORS_LM79_FAN3_MIN fan3:1
|
||||
temp SENSORS_LM79_TEMP temp:3
|
||||
temp_hyst SENSORS_LM79_TEMP_HYST temp:2
|
||||
temp_over SENSORS_LM79_TEMP_OVER temp:1
|
||||
vid SENSORS_LM79_VID vid:1
|
||||
fan1_div SENSORS_LM79_FAN1_DIV fan_div:1
|
||||
fan2_div SENSORS_LM79_FAN2_DIV fan_div:2
|
||||
fan3_div SENSORS_LM79_FAN3_DIV fan_div:3
|
||||
alarms SENSORS_LM79_ALARMS alarms:1
|
||||
@@ -296,6 +296,8 @@ sub main {
|
||||
initialize;
|
||||
my ($base_dir,@prefixes) = scan_arguments @_;
|
||||
scan_all $base_dir;
|
||||
print "Module Parameters\n";
|
||||
print "-----------------\n\n";
|
||||
if (@prefixes) {
|
||||
foreach $prefix (@prefixes) {
|
||||
foreach $el (keys %features) {
|
||||
|
||||
@@ -51,7 +51,7 @@ sub print_info
|
||||
{
|
||||
my ($modname) = @_;
|
||||
my (@lines,$line,$option,$type,$desc);
|
||||
print "Author: ", `modinfo -a $modname`, "\n";
|
||||
print "Author: ", `modinfo -a $modname`, "\n\n";
|
||||
print "Insmod Parameters\n";
|
||||
print "-----------------\n";
|
||||
print "\n";
|
||||
|
||||
Reference in new issue
Block a user