Something in the README about ways to determine your chips

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@649 7894878c-1315-0410-8ee3-d5d059ff63e0

README

@@ -28,6 +28,7 @@ and module bit-mb is renamed i2c-via. You have been warned.
 
 At least the following SMBus adapters are supported:
   Acer Labs M1541 and M1543C (used in the Aladdin IV, V and Pro 2 chipsets)
+  AMD 756
   Apple Hydra (used on some PPC machines)
   Intel ICH (used in the Intel 810 and 810E chipsets)
   Intel PIIX4 (used in most Intel chipsets)
@@ -62,6 +63,17 @@ If you want to offer more substantial help, this is very welcome too, of
 course.
 
 
+Don't ask us whether we support a particular mainboard; we do not know.
+We *do* know what hardware we support, but usually, it is easier to
+install everything and run sensors-detect. It will tell you what hardware
+you have (and incidentally, what corresponding drivers are needed). You
+could also take a look at http://members.brabant.chello.nl/~a.vankaam/mbm
+(this lists chips found on many mainboard, but regrettable, not the adapters
+on them) or http://web01.fureai.or.jp/~hirobo/project/reserch_project.html
+(yes, it is japanese; you want the ninth column, and it again lists only
+chips, not adapters).
+
+
 SMBus, also known as System Management Bus, is a protocol for communicating
 through a I2C ('I squared C') bus. Many modern mainboards have a System
 Management Bus. There are a lot of devices which can be connected to a
@@ -96,7 +108,7 @@ for you. But please try to read the documentation and FAQ first before you ask
 any questions!
 
 The latest version of this package can always be found on our homepage:
-http://www.netroedge.com/~lm78. Pre-release  versions can be retrieved
+http://www.netroedge.com/~lm78. Pre-release versions can be retrieved
 through anonymous CVS; see doc/cvs for more information.
 
 This whole package is copyright (c) 1998, 1999 by Frodo Looijaard and 

lib/access.c

@@ -128,10 +128,12 @@ int sensors_chip_name_has_wildcards(sensors_chip_name chip)
     return 0;
 }
 
+#include <stdio.h>
+
 /* Look up the label which belongs to this chip. Note that chip should not
    contain wildcard values! *result is newly allocated (free it yourself).
    This function will return 0 on success, and <0 on failure.  */
-int sensors_get_label(sensors_chip_name name, int feature, char **result)
+int sensors_get_label1(sensors_chip_name name, int feature, char **result)
 {
   const sensors_chip *chip;
   const sensors_chip_feature *featureptr;
@@ -153,10 +155,17 @@ int sensors_get_label(sensors_chip_name name, int feature, char **result)
   return 0;
 }
 
+int sensors_get_label(sensors_chip_name name, int feature, char **result)
+{
+	int res=sensors_get_label1(name,feature,result);
+	if (res) fprintf(stderr,"\nerror get_label: %d\n",res);
+	return res;
+}
+
 /* Read the value of a feature of a certain chip. Note that chip should not
    contain wildcard values! This function will return 0 on success, and <0
    on failure. */
-int sensors_get_feature(sensors_chip_name name, int feature, double *result)
+int sensors_get_feature1(sensors_chip_name name, int feature, double *result)
 {
   const sensors_chip_feature *main_feature;
   const sensors_chip_feature *alt_feature;
@@ -196,6 +205,13 @@ int sensors_get_feature(sensors_chip_name name, int feature, double *result)
   return 0;
 }
       
+int sensors_get_feature(sensors_chip_name name, int feature, double *result)
+{
+	int res=sensors_get_feature1(name,feature,result);
+	if (res) fprintf(stderr,"\nerror get_feature: %d\n",res);
+	return res;
+}
+
 /* Set the value of a feature of a certain chip. Note that chip should not
    contain wildcard values! This function will return 0 on success, and <0
    on failure. */