Add support for KT600. Requested by Lou

<lm-sensors@fixit.nospammail.net>.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2109 7894878c-1315-0410-8ee3-d5d059ff63e0

doc/busses/i2c-viapro

@@ -9,7 +9,7 @@ Supported adapters:
   * VIA Technologies, Inc. VT82C686A/B 
     Datasheet: Sometimes available at the VIA website
 
-  * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235
+  * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
     Datasheet: available on request from Via
 
 Author: Kyösti Mälkki <kmalkki@cc.hut.fi>
@@ -38,6 +38,8 @@ Your /proc/pci or lspci -n listing must show one of these :
  device 1106:3074   (VT8233)
  device 1106:3147   (VT8233A)
  device 1106:8235   (VT8231)
+ devide 1106:3177   (VT8235)
+ devide 1106:3227   (VT8237)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.

kernel/busses/i2c-viapro.c

@@ -29,6 +29,7 @@
 	8233
 	8233A (0x3147 and 0x3177)
 	8235
+	8237
    Note: we assume there can only be one device, with one SMBus interface.
 */
 
@@ -401,6 +402,10 @@ static void __devexit vt596_remove(struct pci_dev *pdev)
 #ifndef PCI_DEVICE_ID_VIA_8235
 #define PCI_DEVICE_ID_VIA_8235	0x3177
 #endif
+/* 8237 is undefined before kernel 2.4.21 */
+#ifndef PCI_DEVICE_ID_VIA_8237
+#define PCI_DEVICE_ID_VIA_8237	0x3227
+#endif
 static struct pci_device_id vt596_ids[] __devinitdata = {
 	{
 		.vendor		= PCI_VENDOR_ID_VIA,
@@ -444,6 +449,13 @@ static struct pci_device_id vt596_ids[] __devinitdata = {
 		.subdevice	= PCI_ANY_ID,
 		.driver_data	= SMBBA3
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_VIA,
+		.device 	= PCI_DEVICE_ID_VIA_8237,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= SMBBA3
+	},
 	{
 		.vendor		= PCI_VENDOR_ID_VIA,
 		.device 	= PCI_DEVICE_ID_VIA_8231_4,