Cleanup a legacy comment that has been replicated to many drivers

but is no longer true. Backported from Linux 2.6.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4328 7894878c-1315-0410-8ee3-d5d059ff63e0

kernel/chips/adm1024.c

@@ -143,8 +143,7 @@ static inline u8 FAN_TO_REG(long rpm, int div)
 #define VID_FROM_REG(val) ((val)==0x1f?0:(val)>=0x10?510-(val)*10:\
                            205-(val)*5)
 
-/* For each registered ADM1024, we need to keep some data in memory. That
-   data is pointed to by adm1024_list[NR]->data. The structure itself is
+/* For each registered ADM1024, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new adm1024 client is
    allocated. */
 struct adm1024_data {

kernel/chips/adm1025.c

@@ -112,8 +112,7 @@ SENSORS_INSMOD_2(adm1025, ne1619);
 
 #define ALARMS_FROM_REG(val) (val)
 
-/* For each registered ADM1025, we need to keep some data in memory. That
-   data is pointed to by adm1025_list[NR]->data. The structure itself is
+/* For each registered ADM1025, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new adm1025 client is
    allocated. */
 struct adm1025_data {

kernel/chips/fscher.c

@@ -103,8 +103,7 @@ SENSORS_INSMOD_1(fscher);
 
 /* Initial limits */
 
-/* For each registered FSCHER, we need to keep some data in memory. That
-   data is pointed to by fscher_list[NR]->data. The structure itself is
+/* For each registered FSCHER, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new fscher client is
    allocated. */
 struct fscher_data {

kernel/chips/fscpos.c

@@ -107,8 +107,7 @@ SENSORS_INSMOD_1(fscpos);
 
 /* Initial limits */
 
-/* For each registered FSCPOS, we need to keep some data in memory. That
-   data is pointed to by fscpos_list[NR]->data. The structure itself is
+/* For each registered FSCPOS, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new fscpos client is
    allocated. */
 struct fscpos_data {

kernel/chips/fscscy.c

@@ -151,8 +151,7 @@ SENSORS_INSMOD_1(fscscy);
 
 /* Initial limits */
 
-/* For each registered FSCSCY, we need to keep some data in memory. That
-   data is pointed to by fscscy_list[NR]->data. The structure itself is
+/* For each registered FSCSCY, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new fscscy client is
    allocated. */
 struct fscscy_data {

kernel/chips/it87.c

@@ -215,8 +215,7 @@ extern inline u8 DIV_TO_REG(long val)
 }
 #define DIV_FROM_REG(val) (1 << (val))
 
-/* For each registered IT87, we need to keep some data in memory. That
-   data is pointed to by it87_list[NR]->data. The structure itself is
+/* For each registered IT87, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new it87 client is
    allocated. */
 struct it87_data {

kernel/chips/lm78.c

@@ -111,8 +111,7 @@ static inline u8 FAN_TO_REG(long rpm, int div)
    bad. Quite a lot of bookkeeping is done. A real driver can often cut
    some corners. */
 
-/* For each registered LM78, we need to keep some data in memory. That
-   data is pointed to by lm78_list[NR]->data. The structure itself is
+/* For each registered LM78, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new lm78 client is
    allocated. */
 struct lm78_data {

kernel/chips/maxilife.c

@@ -233,8 +233,7 @@ enum maxi_type { cristal, cognac, ashaki, nba };
 enum sensor_type { fan, temp, vid, pll, lcd, alarm };
 
 /* For each registered MaxiLife controller, we need to keep some data in
-   memory. That data is pointed to by maxi_list[NR]->data. The structure
-   itself is dynamically allocated, at the same time when a new MaxiLife
+   memory. It is dynamically allocated, at the same time when a new MaxiLife
    client is allocated. We assume MaxiLife will only be present on the
    SMBus and not on the ISA bus. */
 struct maxi_data {

kernel/chips/mic74.c

@@ -54,8 +54,7 @@ SENSORS_INSMOD_1(mic74);
 /* Initial values */
 /* All registers are 0, except for MIC74_REG_DATA which is 0xFF */
 
-/* For each registered MIC74, we need to keep some data in memory. That
-   data is pointed to by mic74_list[NR]->data. The structure itself is
+/* For each registered MIC74, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new mic74 client is
    allocated. */
 struct mic74_data {

kernel/chips/sis5595.c

@@ -161,8 +161,7 @@ static inline u8 FAN_TO_REG(long rpm, int div)
 #define DIV_FROM_REG(val) (1 << (val))
 #define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
 
-/* For the SIS5595, we need to keep some data in memory. That
-   data is pointed to by sis5595_list[NR]->data. The structure itself is
+/* For the SIS5595, we need to keep some data in memory. It is
    dynamically allocated, at the time when the new sis5595 client is
    allocated. */
 struct sis5595_data {

kernel/chips/w83627hf.c

@@ -281,8 +281,7 @@ static inline u8 DIV_TO_REG(long val)
 	return ((u8) i);
 }
 
-/* For each registered chip, we need to keep some data in memory. That
-   data is pointed to by w83627hf_list[NR]->data. The structure itself is
+/* For each registered chip, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new client is allocated. */
 struct w83627hf_data {
 	struct i2c_client client;

kernel/chips/w83781d.c

@@ -246,8 +246,7 @@ static inline u8 DIV_TO_REG(long val, enum chips type)
    bad. Quite a lot of bookkeeping is done. A real driver can often cut
    some corners. */
 
-/* For each registered W83781D, we need to keep some data in memory. That
-   data is pointed to by w83781d_list[NR]->data. The structure itself is
+/* For each registered W83781D, we need to keep some data in memory. It is
    dynamically allocated, at the same time when a new w83781d client is
    allocated. */
 struct w83781d_data {