add support for nvidia nForce to i2c-amd756.

Patch from
        Csaba Halász <hcs@ics2.ics.tvnet.hu>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1365 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2002-05-01 23:28:09 +00:00
1 parent 88439d9566
commit 7e4acca8c8
2 files changed
+58 -30

No files matched your search

+56 -29
View File
@@ -25,7 +25,11 @@
*/
/*
Supports AMD756, AMD766, and AMD768.
2002-04-08: Added nForce support. (Csaba Halasz)
*/
/*
Supports AMD756, AMD766, AMD768 and nVidia nForce
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -51,11 +55,31 @@ MODULE_LICENSE("GPL");
#ifndef PCI_DEVICE_ID_AMD_766
#define PCI_DEVICE_ID_AMD_766 0x7413
#endif
#ifndef PCI_DEVICE_ID_AMD_768
#define PCI_DEVICE_ID_AMD_768 0x7443
#endif
#ifndef PCI_VENDOR_ID_NVIDIA
#define PCI_VENDOR_ID_NVIDIA 0x10DE
#endif
#ifndef PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS
#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01B4
#endif
static int supported[] = {PCI_DEVICE_ID_AMD_756,
PCI_DEVICE_ID_AMD_766,
0x7443, /* AMD768 */
0 };
struct sd {
const unsigned short vendor;
const unsigned short device;
const unsigned short function;
const char* name;
int amdsetup:1;
};
static struct sd supported[] = {
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_756, 3, "AMD756", 1},
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_766, 3, "AMD766", 1},
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_768, 3, "AMD768", 1},
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS, 1, "nVidia nForce", 0},
{0, 0, 0}
};
/* AMD756 SMBus address offsets */
#define SMB_ADDR_OFFSET 0xE0
@@ -150,7 +174,7 @@ static unsigned short amd756_smba = 0;
int amd756_setup(void)
{
unsigned char temp;
int *num = supported;
struct sd *currdev;
struct pci_dev *AMD756_dev = NULL;
if (pci_present() == 0) {
@@ -158,38 +182,41 @@ int amd756_setup(void)
return(-ENODEV);
}
/* Look for the AMD756, function 3 */
/* Note: we keep on searching until we have found 'function 3' */
do {
if((AMD756_dev = pci_find_device(PCI_VENDOR_ID_AMD,
*num, AMD756_dev))) {
if(PCI_FUNC(AMD756_dev->devfn) != 3)
continue;
break;
/* Look for a supported chip */
for(currdev = supported; currdev->vendor; ) {
AMD756_dev = pci_find_device(currdev->vendor,
currdev->device, AMD756_dev);
if (AMD756_dev != NULL) {
if (PCI_FUNC(AMD756_dev->devfn) == currdev->function)
break;
} else {
currdev++;
}
num++;
} while (*num != 0);
}
if (AMD756_dev == NULL) {
printk
("i2c-amd756.o: Error: Can't detect AMD756, function 3!\n");
("i2c-amd756.o: Error: No AMD756 or compatible device detected!\n");
return(-ENODEV);
}
printk(KERN_INFO "i2c-amd756.o: Found %s SMBus controller.\n", currdev->name);
pci_read_config_byte(AMD756_dev, SMBGCFG, &temp);
if ((temp & 128) == 0) {
printk
("i2c-amd756.o: Error: SMBus controller I/O not enabled!\n");
if (currdev->amdsetup)
{
pci_read_config_byte(AMD756_dev, SMBGCFG, &temp);
if ((temp & 128) == 0) {
printk("i2c-amd756.o: Error: SMBus controller I/O not enabled!\n");
}
return(-ENODEV);
/* Determine the address of the SMBus areas */
/* Technically it is a dword but... */
pci_read_config_word(AMD756_dev, SMBBA, &amd756_smba);
amd756_smba &= 0xff00;
amd756_smba += SMB_ADDR_OFFSET;
} else {
amd756_smba = 0x5500;
}
/* Determine the address of the SMBus areas */
/* Technically it is a dword but... */
pci_read_config_word(AMD756_dev, SMBBA, &amd756_smba);
amd756_smba &= 0xff00;
amd756_smba += SMB_ADDR_OFFSET;
if (check_region(amd756_smba, SMB_IOSIZE)) {
printk
("i2c-amd756.o: SMB region 0x%x already in use!\n",
+2 -1
View File
@@ -514,7 +514,8 @@ use vars qw(@pci_adapters @chip_ids @undetectable_adapters);
devid => 0x01b4,
func => 1,
procid => "nVidia nForce SMBus",
match => sub { $_[0] =~ /dontmatchthis/ },
driver => "i2c-amd756",
match => sub { $_[0] =~ /^SMBus AMD7X6 adapter at [0-9,a-f]{4}/ },
} ,
{
vendid => 0x1166,