(mds) as99127f update.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@618 7894878c-1315-0410-8ee3-d5d059ff63e0

etc/sensors.conf.eg

@@ -196,7 +196,7 @@ chip "lm78-*" "lm78-j-*" "lm79-*" "w83781d-*" "sis5595-*"
     set in6_max -5 * 1.05
 
 
-chip "w83782d-*" "w83783s-*" "w83627hf-*" "as99127f-*"
+chip "w83782d-*" "w83783s-*" "w83627hf-*"
 
 # Same as above for w83781d except that in5 and in6 are computed differently.
 # Rather than an internal inverting op amp, the 82d/83s use standard positive
@@ -252,6 +252,59 @@ chip "w83782d-*" "w83783s-*" "w83627hf-*" "as99127f-*"
 #   set sensor3 3435
 
 
+chip "as99127f-*"
+
+# Same as above for w83782d except that in5 and in6 negative voltages
+# are computed as in the w83781d.
+
+    label in0 "VCore 1"
+    label in1 "VCore 2"
+    label in2 "+3.3V"
+    label in3 "+5V"
+    label in4 "+12V"
+    label in5 "-12V"
+    label in6 "-5V"
+    label in7 "V5SB"
+    label in8 "VBat"
+
+    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
+    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
+    compute in5 (5.14 * @) - 14.91  ,  (@ + 14.91) / 5.14
+    compute in6 (3.14 * @) -  7.71  ,  (@ +  7.71) / 3.14
+    compute in7 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
+
+# set limits to  5% for the critical voltages
+# set limits to 10% for the non-critical voltages
+# set limits to 20% for the battery voltage
+
+    set in0_min vid*0.95
+    set in0_max vid*1.05
+    set in1_min vid*0.95
+    set in1_max vid*1.05
+    set in2_min 3.3 * 0.95
+    set in2_max 3.3 * 1.05
+    set in3_min 5.0 * 0.95
+    set in3_max 5.0 * 1.05
+    set in4_min 12 * 0.90
+    set in4_max 12 * 1.10
+    set in5_min -12 * 0.90
+    set in5_max -12 * 1.10
+    set in6_min -5 * 0.95
+    set in6_max -5 * 1.05
+    set in7_min 5 * 0.95
+    set in7_max 5 * 1.05
+    set in8_min 3.0 * 0.80
+    set in8_max 3.0 * 1.20
+
+# set up sensor types (thermistor is default)
+# 1 = PII/Celeron Diode; 2 = 3904 transistor;
+# 3435 = thermistor with Beta = 3435
+# If temperature changes very little, try 1 or 2.
+#   set sensor1 1
+#   set sensor2 2
+#   set sensor3 3435
+
+
 chip "gl518sm-*"
 
 # Factors and labels taken from GL518SM datasheet, they seem to give