(mds) Claim support for LM77. Minor updates in other docs.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@610 7894878c-1315-0410-8ee3-d5d059ff63e0

README

@@ -35,7 +35,7 @@ At least the following SMBus adapters are supported:
   Apple Hydra (used on some PPC machines)
 
 At least the following hardware sensor chips are supported:
-  National Semicoductor LM75, LM78, LM78-J, LM79. LM80, LM81, and LM84
+  National Semicoductor LM75, LM77, LM78, LM78-J, LM79. LM80, LM81, and LM84
   Winbond W83781D, W83782D, W83783S, and W83627HF
   Genesys Logic GL518SM (rev 00, 80), GL520SM, GL523SM
   Analog Devices ADM1021, ADM1022, and ADM9240

doc/chips/SUMMARY

@@ -62,6 +62,7 @@ gl525sm-to-be-written
 
 lm75
 	lm75		1	-	-	-	yes	no
+	lm77		1	-	-	-	yes	no
 
 lm78
 	lm78		1	7	3	-	yes	yes

doc/chips/adm1021

@@ -1,14 +1,21 @@
 Kernel driver `adm1021.o'
 =========================
 
-Status: Complete; tested for the ADM1021 and MAX1617,
-        untested for the MAX1617A and the THMC10.
+Status: Complete; tested for most devices.
 
 Supported chips:
   * Analog Devices ADM1021
     Prefix `adm1021'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e (inclusive)
     Datasheet: Publicly available at the Analog Devices website
+  * Genesys Logic GL523SM
+    Prefix `gl523sm'
+    Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e (inclusive)
+    Datasheet:
+  * Intel Xeon Processor
+    Prefix - any other - requires 'force' parameter - see MODPARMS file
+    Addresses scanned: none
+    Datasheet: Publicly available at Intel website
   * Maxim MAX1617
     Prefix `max1617'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e (inclusive)
@@ -17,6 +24,10 @@ Supported chips:
     Prefix `max1617a'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e (inclusive)
     Datasheet: Publicly available at the Maxim website
+  * National Semiconductor LM84
+    Prefix `lm84'
+    Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e (inclusive)
+    Datasheet: Publicly available at the National Semiconductor website
   * TI THMC10
     Prefix `thmc10'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e (inclusive)

doc/chips/lm75

@@ -4,10 +4,14 @@ Kernel driver `lm75.o'
 Status: Complete and well-tested
 
 Supported chips: 
-  * National Semiconductors LM75
+  * National Semiconductor LM75
     Prefix: `lm75'
     Addresses scanned: I2C 0x48 - 0x4f (inclusive)
     Datasheet: Publicly available at the National Semiconductors website
+  * National Semiconductor LM77
+    Prefix: `lm75'
+    Addresses scanned: I2C 0x48 - 0x4b (inclusive)
+    Datasheet: Publicly available at the National Semiconductors website
 
 Author: Frodo Looijaard <frodol@dds.nl>
 
@@ -48,6 +52,10 @@ will do no harm, but will return 'old' values.
 The LM75 is usually used in combination with LM78-like chips, to measure
 the temperature of the processor(s).
 
+The LM77 is supported as well. It is not distinguished from an LM75
+and the two additional registers in the LM77 are not supported.
+The prefix in the /proc directory is still 'lm75'.
+
 
 Chip Features
 -------------

doc/chips/thmc50

@@ -4,6 +4,10 @@ Kernel driver `thmc50.o'
 Status: Complete and some-what tested
 
 Supported chips: 
+  * Analog Devices ADM1022
+    Prefix: `adm1022'
+    Addresses scanned: I2C 0x2D - 0x2F (inclusive)
+    Datasheet: Publicly available at the Analog Devices website
   * Texas Instruments THMC50
     Prefix: `thmc50'
     Addresses scanned: I2C 0x2D - 0x2F (inclusive)

doc/chips/w83781d

@@ -20,7 +20,7 @@ Supported chips:
   * Winbond W83627HF
     Prefix 'w83627hf'
     Addresses scanned: I2C 0x20 - 0x2f (inclusive), ISA 0x290 (8 I/O ports)
-    Datasheet: Available on request from Winbond
+    Datasheet: Possibly available on request from Winbond
 
 
 Author: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>,