Trim trailing whitespace

Making sure that none of the actual test files were touched.
2026-09-30 21:43:05 +07:00 · 2021-08-24 22:19:37 +00:00
parent fe0a24357d
commit 92e1538a19
12 changed files with 25 additions and 28 deletions
@@ -86,7 +86,7 @@ git HEAD
                  and LM95235
                  Add detection of NCT7802Y
                  Print kernel version and processor information
-                  Add detection of NCT6792D 
+                  Add detection of NCT6792D
                  Add reference to nct6683 driver
                  Show that NCT6102D/6104D/6106D are supported by nct6775 driver
                  Show NCT5573D as compatible to NCT6776F with same chip ID
@@ -379,7 +379,7 @@ git HEAD
                   Move help section to sensors.conf.5
                   Add a section for the Asus/Fintek F8000
  sensors-detect: Fix detection of ADT7463 and LM96000
-                  Add VIA VX800/VX820 SMBus support 
+                  Add VIA VX800/VX820 SMBus support
                  Fix detection of Intel 5000 series FB-DIMM AMB
                  Fix detection of ADT7462
                  Fix detection of SMSC LPC47M292
@@ -529,7 +529,7 @@ git HEAD
                  Mention the f75375s driver
                  Add SMSC LPC47B367-NC detection (no sensors)
                  Reduce w83781d/lm78 I2C address probing range
-                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection 
+                  Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection

 3.0.0-rc3 (2007-10-28)
  libsensors: Add a default configuration file
@@ -562,7 +562,7 @@ git HEAD
           Better handling of the fault flags
  sensors-conf-convert: Add a short help text
  sensors-detect: Fix SMSC SCH311x detection
-                  Add AMD K10 CPU sensor detection 
+                  Add AMD K10 CPU sensor detection

 3.0.0-rc1 (2007-09-25)
  Initial release
@@ -68,7 +68,7 @@ BINDIR := $(PREFIX)/bin
 SBINDIR := $(PREFIX)/sbin

 # You should not need to change this. It is the basic directory into which
-# include files will be installed. The actual directory will be 
+# include files will be installed. The actual directory will be
 # $(INCLUDEDIR)/sensors for library include files.
 INCLUDEDIR := $(PREFIX)/include
 LIBINCLUDEDIR := $(INCLUDEDIR)/sensors
@@ -103,9 +103,9 @@ BUILD_STATIC_LIB := 1

 # Within each Module.mk, rules and dependencies can be added to targets
 # all, install and clean. Use double colons instead of single ones
-# to do this. 
+# to do this.

-# The subdirectories we need to build things in 
+# The subdirectories we need to build things in
 SRCDIRS := lib prog/detect prog/pwm \
           prog/sensors ${PROG_EXTRA:%=prog/%} etc
 # Only build isadump and isaset on x86 machines.
@@ -166,7 +166,7 @@ LIBCFLAGS := -fpic -D_REENTRANT $(ALL_CFLAGS)
 all::

 # Include all makefiles for sub-modules
-INCLUDEFILES := 
+INCLUDEFILES :=
 include $(patsubst %,%/Module.mk,$(SRCDIRS))
 ifneq ($(MAKECMDGOALS),clean)
 ifneq ($(MAKECMDGOALS),uninstall)
@@ -2,7 +2,7 @@ Begin4
 Title: lm_sensors
 Version: 3.6.0
 Entered-date: 2019-10-18
-Description: Hardware health monitoring package for Linux. It consists of 
+Description: Hardware health monitoring package for Linux. It consists of
             a library to allow applications to read sensors data more
             easily, and of an example program to pretty print this data.
             Also included is a fan speed control script.
@@ -20,7 +20,7 @@ Does my monitoring chip use fan divisors?
  16 bits, so divisors are no longer required. In that case, you won't
  see "div" values in the output of sensors, and nothing needs to be
  configured:
-  
+
  CPU1 Fan:    2160 RPM  (min =  800 RPM)
  CPU2 Fan:       0 RPM  (min =  799 RPM)  ALARM
  Front3 Fan:     0 RPM  (min =    0 RPM)
@@ -1,4 +1,3 @@
-
 fancontrol - automated software based fan speed regulation


@@ -1,4 +1,4 @@
-Git Repository 
+Git Repository

 Anonymous access to our git repository is available. This means
 that users can have direct access to up-to-the-minute code.
@@ -77,7 +77,7 @@ For diodes, voltage is linear with temperature.
 Winbond W83782D and W83783S
 ---------------------------
 These chips default to thermistors with Beta = 3435.
-Each sensor on the chip can be individually set to be 
+Each sensor on the chip can be individually set to be
 a diode, transistor, or thermistor.
 If the temperature reading changes much less than expected,
 the sensor type probably needs to be changed to a diode.
@@ -425,7 +425,7 @@ if (m/^([\s#]*bus\s+"?i2c-\d+"?\s+"([^"]+)")\s+"[^"]*"/) {
 	print STDERR "Processing bus statement: $2\n" if $debug;

 	if ($2 eq "ISA main adapter") {
-		$_ = '';	# Drop entirely 
+		$_ = '';	# Drop entirely
 	} else {
 		$_ = "$1\n";	# Drop algorithm name
 	}
@@ -227,7 +227,7 @@ chip "smsc47m192-*"


 chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" \
-     "emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*" 
+     "emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*"

    label in1 "Vcore"
    label in2 "+3.3V"
@@ -19,6 +19,6 @@ user :: all-lib-test
 $(LIB_TEST_DIR)/test-scanner.ro: $(LIB_DIR)/data.h $(LIB_DIR)/conf.h $(LIB_DIR)/conf-parse.h $(LIB_DIR)/scanner.h

 clean-lib-test:
-	$(RM) $(LIB_TEST_DIR)/*.rd $(LIB_TEST_DIR)/*.ro 
+	$(RM) $(LIB_TEST_DIR)/*.rd $(LIB_TEST_DIR)/*.ro
 	$(RM) $(LIB_TEST_TARGETS)
 clean :: clean-lib-test
@@ -49,44 +49,44 @@ int main(void)
 			case NEG:
 				printf("NEG\n");
 				break;
-	
+
 			case EOL:
 				printf("EOL\n");
 				break;
-	
+
 			case BUS:
 				printf("BUS\n");
 				break;
-	
+
 			case LABEL:
 				printf("LABEL\n");
 				break;
-	
+
 			case SET:
 				printf("SET\n");
 				break;
-	
+
 			case CHIP:
 				printf("CHIP\n");
 				break;
-	
+
 			case COMPUTE:
 				printf("COMPUTE\n");
 				break;
-	
+
 			case IGNORE:
 				printf("IGNORE\n");
 				break;
-	
+
 			case FLOAT:
 				printf("FLOAT: %f\n", sensors_yylval.value);
 				break;
-	
+
 			case NAME:
 				printf("NAME: %s\n", sensors_yylval.name);
 				free(sensors_yylval.name);
 				break;
-	
+
 			case ERROR:
 				printf("ERROR\n");
 				break;
@@ -103,4 +103,3 @@ int main(void)

 	return 0;
 }
-
@@ -98,4 +98,3 @@ foreach $scenario (@scenarios) {
 	ok($test->diff_exact(\@stderr, \@experr, \@diff),
 		"stderr: " . $scenario->{"desc"}) or print @diff;
 }
-
				`@@ -1,4 +1,3 @@`

				`fancontrol - automated software based fan speed regulation`