Add code to detect SA56004.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@5983 7894878c-1315-0410-8ee3-d5d059ff63e0

CHANGES

@@ -16,6 +16,7 @@ SVN HEAD
                   Add detection of MAX6642
                   Add detection of ITE IT8772E
                   Don't advertise the ipmisensors driver
+                  Add detection of SA56004
 
 3.3.0 (2011-03-28)
   Makefile: Check for bison and flex

prog/detect/sensors-detect

@@ -1054,6 +1054,11 @@ use vars qw(@i2c_adapter_names);
 		driver => "lm90",
 		i2c_addrs => [0x4c..0x4d],
 		i2c_detect => sub { lm90_detect(@_, 13); },
+	}, {
+		name => "NXP/Philips SA56004",
+		driver => "lm90",
+		i2c_addrs => [0x48..0x4f],
+		i2c_detect => sub { lm90_detect(@_, 14); },
 	}, {
 		name => "Analog Devices ADT7481",
 		driver => "to-be-written",
@@ -4352,11 +4357,11 @@ sub max6680_95_detect
 #		  6 = MAX6646/MAX6647/MAX6648/MAX6649/MAX6692,
 #		  8 = W83L771W/G, 9 = TMP401, 10 = TMP411,
 #		  11 = W83L771AWG/ASG, 12 = MAX6690,
-#		  13 = ADT7461A/NCT1008
+#		  13 = ADT7461A/NCT1008, 14 = SA56004
 # Registers used:
 #   0x03: Configuration
 #   0x04: Conversion rate
-#   0xbf: Configuration 2 (National Semiconductor and Winbond only)
+#   0xbf: Configuration 2 (National Semiconductor, Winbond, and Philips only)
 #   0xfe: Manufacturer ID
 #   0xff: Chip ID / die revision
 sub lm90_detect
@@ -4457,6 +4462,13 @@ sub lm90_detect
 		return if $mid != 0x41;		# Analog Devices
 		return 8 if $cid == 0x57;	# ADT7461A, NCT1008
 	}
+	if ($chip == 14) {
+		return if ($conf & 0x2a) != 0;
+		return if ($conf2 & 0xfe) != 0;
+		return if $rate > 0x09;
+		return if $mid != 0xa1;		# NXP Semiconductor/Philips
+		return 6 if $cid == 0x00;	# SA56004
+	}
 	return;
 }