add i2c-savage4

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1345 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2002-04-02 02:01:06 +00:00
1 parent 5990ece544
commit 958e20c76f
3 files changed
+40 -2

No files matched your search

+2 -1
View File
@@ -18,8 +18,9 @@ ask CVS about it:
-----------------------------------------------------------------------------
2.6.4 (2002????)
Module i2c-savage4: new
Module i2c-viapro: Add support for VT8233A (0x3147)
Program sensors-detect: Add VT8233A
Program sensors-detect: Add VT8233A, several S3 devices
2.6.3 (20020322)
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
+37
View File
@@ -0,0 +1,37 @@
Kernel driver `i2c-savage4.o'
Status: Alpha
Supported adapters:
* Savage4
* Savage2000
Author: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock
<phil@netroedge.com>, Ralph Metzler <rjkm@thp.uni-koeln.de>,
Alexander Wold, and Mark D. Studebaker <mdsxyz123@yahoo.com>
Main contact: Sensors mailing list
Module Parameters
-----------------
(none)
Description
-----------
The Savage4 chips contain two I2C interfaces (aka a I2C 'master'
or 'host').
The first interface is used for DDC (Data Display Channel)
which is a serial channel through the VGA monitor connector
to a DDC-compliant monitor. This interface is defined by the
Video Electronics Standards Association (VESA). The standards
are available for purchase at http://www.vesa.org .
The DDC bus is not yet supported because its register is not
directly memory-mapped.
The second interface is a general-purpose I2C bus.
This is the only interface supported by the driver at the moment.
+1 -1
View File
@@ -24,7 +24,7 @@ KERNELBUSSESDIR := $(MODULE_DIR)
# Regrettably, even 'simply expanded variables' will not put their currently
# defined value verbatim into the command-list of rules...
# These targets are NOT included in 'mkpatch' ...
KERNELBUSSESTARGETS :=
KERNELBUSSESTARGETS := $(MODULE_DIR)/i2c-savage4.o
# These targets ARE included in 'mkpatch' ...
ifneq ($(shell if grep -q '^CONFIG_I2C_ALI1535=y' $(LINUX)/.config; then echo 1; fi),1)