Yet more documentation updates, and a quick Makefile update to install all
include files correctly.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@50 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Frodo Looijaard committed 1998-12-08 20:48:17 +00:00
1 parent ca90531f6b
commit a28dc58524
6 files changed
+71 -14

No files matched your search

+39 -9
View File
@@ -37,32 +37,62 @@ With the above, the managing of all those modules is suddenly no problem
at all!
i2c-core:
(i2c) i2c-core:
The core i2c module (surprise!). Almost everything else depends on this one.
Module parameters:
i2c_debug (i) Set debug level
i2c-proc: i2c-core
(src) i2c-proc: i2c-core
Creates /proc/bus/i2c* files.
smbus: i2c-core
(src) smbus: i2c-core
SMBus emulation on i2c busses. Base algorithm, on which SMBus-only adapters
rely.
piix4: smbus i2c-core
(src) piix4: smbus i2c-core
PIIX4 SMBus access.
isa: i2c-core
(src) isa: i2c-core
Defines the ISA bus as being a I2C adapter. It isn't, of course; but this is
often used by sensor client modules, to keep the code small and simple.
sensors: i2c-core
(src) sensors: i2c-core
General purpose routines for sensor client modules
lm78: sensors smbus i2c-core
(src) lm78: sensors smbus i2c-core
LM78, LM78-J and LM79 chip driver
lm75: sensors smbus i2c-core
(src) lm75: sensors smbus i2c-core
LM75 chip driver
(To do: i2c modules)
(i2c) algo-bit: i2c-core
The 'bit' algorithm, used by many i2c adapters
Module parameters:
bit_test (i) Test the lines of the bus to see if it is stuck
bit_scan (i) Scan for active chips on the bus
i2c_debug (i) debug level - 0 off; 1 normal; 2,3 more verbose;
9 bit-protocol
(i2c) bit-mb: algo-bit i2c-core
VIA VT82C586B bus access. This is often used instead of the PIIX4 as SMBus
(i2c) bit-lp: algo-bit i2c-core
I2C bus through the parallel port, Philips interface
Module parameters:
base (i) Base address of parallel port
(i2c) bit-velle: algo-bit i2c-core
I2C bus through the parallel port, Vellemann K9000 interface
Module parameters:
base (i) Base address of parallel port
(i2c) i2c-dev: i2c-core
/dev interface for I2C adapters. This will be superseded by a module which
will also implement SMBus access.
(i2c) hw-monitor: ???
Old skeleton driver for GL518SM. Will be superseded by a module which
interfaces with the sensors module.
Several other modules are not yet ported by Simon Vogl. They are mostly in
i2c/old-code.