Merge pull request #235 from dokutan/master

configs: Add Gigabyte GA-H170M-D3H

configs/Gigabyte/GA-H170M-D3H.conf

@@ -0,0 +1,30 @@
+# Configuration for the Gigabyte GA-H170M-D3H (name from the manual) mainboard.
+# Name from dmidecode -s baseboard-product-name: H170M-D3H-CF
+# BIOS version: F23f
+# Driver: it87
+# added by dokutan, 2020
+
+chip "it8628-isa-*"
+   
+    ### voltage sensors
+    ### these labels are mostly determined by comparing the values to the values from the bios
+    # in1 - 1n5: i have no clue, the bios reports +5V and +12V values,
+    # the it87 kernel documentation suggests in3 might be internal to the chip
+    # label  in0 "Vcore"     # this value scales with CPU load but seems a bit low (~0.7V to 1.2V)
+    # label  in2 "+12V"      # in2*6 is exactly the +12V value from the bios
+    label  in6 "Vmemory"     # this is stable and the value from the bios
+   
+    ### fans
+    ### the mappings fan to label are all tested
+    label  fan1 "CPU fan"
+    label  fan2 "Case fan 1"
+    label  fan3 "Case fan 2"
+    ignore fan4              # there are only 3 fan headers + CPU fan on this mainboard
+    label  fan5 "Case fan 3"
+    
+    ### temperature sensors
+    ### these labels are determined by comparison with other sensors under different load scenarios
+    # temp5 correlates with CPU temp, but stays significantly lower
+    # temp1, temp4 and temp6 stay relatively low, even under CPU load   
+    ignore temp2             # this always gives a reading of +127.0°C
+    label  temp3 "CPU temp"  # this might have a 1-2°C difference to the coretemp package sensor