wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-11-01 13:20:30 +00:00
Code Issues Packages Projects Releases Wiki Activity

updates

Browse Source 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@981 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2001-01-10 03:52:46 +00:00
1 parent babf3a845b
commit b330dcf9d1
1 file changed
+17 -13
Download Patch File Download Diff File Expand all files Collapse all files
QUICKSTART
+17 -13
View File
@@ -1,6 +1,9 @@
LM_SENSORS QUICK INSTALLATION INSTRUCTIONS
------------------------------------------
NOTE: PLEASE SKIM THE INSTALL DOCUMENT, OR BETTER YET READ IT CAREFULLY!
The instructions in this document will only work if you have a standard
system, and may cause problems.
The instructions in this document will generally work if you have a standard
system, but not always!!
Quickstart:
@@ -9,33 +12,34 @@ Quickstart:
compile your own from a 'vanilla' tree (get one from
ftp://ftp.kernel/org/pub/linux/kernel/).
* Install the latest i2c package. This may be necessary even if
you have a 2.4 kernel.
* Download, build, and install the latest i2c package.
This is not necessary if you are using lm_sensors 2.5.5
with a 2.4 kernel.
* Do `make'.
The warnings about .d files at the start are harmless.
If you have compile problems, you probably skipped step 2.
If you have compile problems, you probably should not have skipped step 2.
Go back and install the latest i2c package.
* Do (as root) `make install'.
* Do a `depmod -a'.
* Do (as root) `depmod -a'.
* Add the line
/usr/local/lib
to /etc/ld.so.conf if it is not there yet.
* Do a `ldconfig'.
* Do (as root) `ldconfig'.
* Run `prog/mkdev/mkdev.sh' to create the device files
* Run (as root) `prog/mkdev/mkdev.sh' to create the device files.
* Run `prog/detect/sensors-detect' to detect your hardware, put
the lines it suggests into /etc/conf.modules or /etc/modules.conf
(whichever one exists) and enter the modprobe lines it suggests.
* Run (as root) `prog/detect/sensors-detect' to detect your hardware,
put the lines it suggests into /etc/modules.conf
and enter the modprobe lines sensors-detect suggests.
Add the line `sensors -s' after the modprobe lines.
* Reboot or else type in the modprobe lines and `sensors -s'
* Reboot, or else type in the modprobe lines and `sensors -s'.
* Run `sensors' to see your output.
* That's all folks!
* That's it! If you have problems, read the INSTALL document.