New SysV init script from

Jakub Narebski <Jakub.Narebski@fuw.edu.pl>


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1280 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2002-01-05 17:16:38 +00:00
1 parent d9965fae33
commit b426711ae0
3 files changed
+162 -2

No files matched your search

+2 -2
View File
@@ -26,6 +26,7 @@ ask CVS about it:
Module pcf8591: new
Module w83781d: Add W83697HF support
Program i2cdump: Add i2c block read capability
Program init/sensors: New SysV init script
Program mkpatch.pl: Add support for fscscy, add more help entries
Program rrd: Install summ_week.cgi
Program sensors: Add PCF8591 and W83697HF support,
@@ -33,8 +34,7 @@ ask CVS about it:
Program sensors-detect: Add several Nvidia chips, add PCF8591,
fix Via686a and it87 detection,
add AMD768, IPMI-BMC-KCS and -SMIC,
fix uninitialized values
fix uninitialized values, it87 beats lm78
2.6.2 (20011118)
Chip Modules (all): malloc.h -> slab.h
+3
View File
@@ -85,6 +85,9 @@ see useful_addresses.html.
An experimental kernel module to enable the Acer Labs 7101 PCI device.
See prog/hotplug/README for details.
* prog/init/sensors (shell script, not installed)
A SysV init script to be installed in /etc/rc.d/...
* prog/matorb/displayit.pl (written in Perl, not installed)
A simple Perl script to display a 'screen' on a Matrix Orbital Display.
+157
View File
@@ -0,0 +1,157 @@
#!@BASH@
#
# @INITRDDIR@/sensors
#
# sensors This shell script takes care of starting and stopping
# sensord, the lm_sensors hardware health monitoring daemon.
#
# Here is the sensors service for SysV init, based on lm_sensors-2.5.5-sensors
# from Mandrake lm_sensors source RPM. It is modified according to recommendations
# for RedHat initscripts. The drivers starting part is taken from alsasound
# service. To configure this service one should put appropriate "alias i2c-bus-0
# xxx" and "alias i2c-sensors-chip-0 xxx" in /etc/modules.conf. The rest should be
# self explaining.
#
# You put it into /etc/rc.d/init.d/, you make symlink (probably using
# chkconfig, ntsysv, tksysv or serviceconf program) named S95xxx and K05xxx
# into /etc/rc#.d (where # is the number of runlevel), and sensors service
# (which starts lm_sensors modules, runs sensors -s and starts sensord)
# will be started automatically at startup/reboot and stopped at shutdown.
# One could also start/stop service manually.
#
# This service was tested for RedHat 7.2 only.
# Jakub Narêbski, Poland
#
# chkconfig: 2345 05 95
# processname: sensord
# config: @SYSCONFDIR@/sensors.conf
# pidfile: /var/run/sensord.pid
# description: Sensors is a sensors daemon which can be used to alert you \
# in the event of a hardware health monitoring alarm.
# Source function library.
. @INITRDDIR@/functions
# Set default return value to 0 (success)
RETVAL=0
# Add @SBINDIR@ (sensord) and @BINDIR@ (sensors) to PATH if necessary
echo "$PATH" | grep -q @SBINDIR@ || PATH=$PATH:@SBINDIR@
echo "$PATH" | grep -q @BINDIR@ || PATH=$PATH:@BINDIR@
export PATH
# Modules to load from modules.conf (modules configuration)
i2c_bus_drivers=´modprobe -c | \
awk ´/^[[:space:]]*alias[[:space:]]+i2c-bus-[[:digit:]]/ { print $3 }´´
i2c_chip_drivers=´modprobe -c | \
awk ´/^[[:space:]]*alias[[:space:]]+i2c-sensors-chip-[[:digit:]]/ { print $3
}´´
# Configuration of sensord
interval=1m # interval between scanning for sensor alarms
log_interval=30m # interval between logging all sensor readings
# Check that we use kernel for which lm_sensors-drivers was installed
[ ´uname -r´ = @MVERSION@ ] || exit 0
# Check that lm_sensors is installed.
[ -x @SBINDIR@/sensord ] || exit 0
[ -x @BINDIR@/sensors ] || exit 0
echo_status()
{
if [ $1 -eq 0 ]; then
echo_success
else
echo_failure
fi
echo
}
start()
{
# Start modules
echo "Starting I2C bus (adapter) drivers: "
for driver in $i2c_bus_drivers; do
echo -n "Starting I2C driver: $driver "
/sbin/modprobe ´echo $driver´
echo_status $?
done
echo "Starting I2C chip (sensors) drivers: "
for driver in $i2c_chip_drivers; do
echo -n "Starting I2C driver: $driver "
/sbin/modprobe $(echo $driver)
echo_status $?
done
# Set Alarm
echo -n "Configuring sensors: "
sensors -s && sleep 2
echo_status $?
# Start daemons.
echo -n $"Starting sensord: "
daemon sensord -i $interval -l $log_interval
RETVAL=$?
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/sensors
echo
return $RETVAL
}
stop()
{
# Stop daemons.
echo -n $"Shutting down sensord: "
killproc sensord
RETVAL=$?
echo
# Remove modules
drivers=´echo "$i2c_chip_drivers $i2c_bus_drivers" | \
tr -s "[:space:]\n" " "´
echo -n "Removing I2C drivers: $drivers"
/sbin/modprobe -r -q $drivers
echo_status $?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/sensors
return $RETVAL
}
reload()
{
# Reread configuration file
sensors -s
return $?
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
status)
status sensord
;;
restart)
stop
start
;;
reload)
reload
;;
condrestart)
[ -e /var/lock/subsys/sensors ] && restart || :
;;
*)
echo "Usage: sensors {start|stop|restart|reload|condrestart|status}"
exit 1
;;
esac
exit $?