mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-16 10:49:31 +00:00
Disable sensors.c and i2c-isa.h in the Module.mk files.
Leave the files there for now.
Remove old installed sensors.o in kernel/Module.mk.
sensors.c was moved to i2c-proc.c in the i2c package.
i2c-isa.h was appended to i2c.h in the i2c package.
Delete all but the SYSCTL and ALARMS definitions in sensors.h,
as the rest of the file was moved to i2c-proc.h in the i2c package.
Remove #include "i2c-isa.h" lines in all chip drivers and
in bus driver i2c-isa.c.
This all probably breaks mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1015 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed
1 parent
fa761437c0
commit
b5d014bd46
28 files changed
+22
-429
No files matched your search
@@ -18,13 +18,21 @@ ask CVS about it:
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
2.6.0 (2001????)
|
||||
NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
|
||||
If your make fails because it can't find <linux/i2c-proc.h>, you
|
||||
forgot this step!!!
|
||||
Also, mkpatch is probably broken right now.
|
||||
File doc/FAQ: Updates
|
||||
File doc/chips/via686a: Claim support for 686b.
|
||||
File sensors.conf.eg: Adjust as99127f -12V calculation
|
||||
File sensors.c: Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
|
||||
Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
|
||||
Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
|
||||
Chip Modules (all ISA): Remove #include "i2c-isa.h"
|
||||
Module i2c-i801: Chip detection cleanup
|
||||
Module lm78: Recognize chipid=0x20
|
||||
Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
|
||||
Module sensors: Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
|
||||
Module sensors: Disabled, moved to i2c package as i2c-proc.c
|
||||
Module via686a: Allow force=9191,address (for A7V/K7V boards)
|
||||
Program mkpatch.pl: Fix adm9240 typos, add more chips to Configure.help
|
||||
Program sensors: Change reported version from 1.3 to the lm_sensors version.
|
||||
@@ -32,7 +40,7 @@ ask CVS about it:
|
||||
Program sensors-detect: Recognize SMSC Victory66 South Bridge
|
||||
|
||||
2.5.5 (20010115)
|
||||
NOTE: i2c 2.5.5 MUST BE be compiled and installed first, UNLESS
|
||||
NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
|
||||
you have kernel 2.4.0-prerelease or greater.
|
||||
Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
|
||||
File doc/developers/proc: new
|
||||
|
||||
+5
-1
@@ -25,7 +25,8 @@ KERNELDIR := $(MODULE_DIR)
|
||||
# defined value verbatim into the command-list of rules...
|
||||
KERNELTARGETS :=
|
||||
ifneq ($(shell if grep -q '^CONFIG_SENSORS=y' $(LINUX)/.config; then echo 1; fi),1)
|
||||
KERNELTARGETS += $(MODULE_DIR)/sensors.o
|
||||
# sensors.c moved to i2c-proc.c in i2c package
|
||||
#KERNELTARGETS += $(MODULE_DIR)/sensors.o
|
||||
endif
|
||||
|
||||
# Include all dependency files
|
||||
@@ -34,11 +35,14 @@ INCLUDEFILES += $(KERNELTARGETS:.o=.d)
|
||||
all-kernel: $(KERNELTARGETS)
|
||||
all :: all-kernel
|
||||
|
||||
# Remove sensors.o possibly left from old versions
|
||||
install-kernel: all-kernel
|
||||
if [ -n "$(KERNELTARGETS)" ] ; then \
|
||||
$(MKDIR) $(DESTDIR)$(MODDIR) ; \
|
||||
$(INSTALL) -o root -g root -m 644 $(KERNELTARGETS) $(DESTDIR)$(MODDIR) ;\
|
||||
fi
|
||||
$(RM) $(DESTDIR)$(MODDIR)/sensors.o
|
||||
|
||||
install :: install-kernel
|
||||
|
||||
clean-kernel:
|
||||
|
||||
@@ -34,7 +34,6 @@
|
||||
#include <linux/init.h>
|
||||
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
|
||||
static void isa_inc_use(struct i2c_adapter *adapter);
|
||||
static void isa_dec_use(struct i2c_adapter *adapter);
|
||||
|
||||
@@ -24,7 +24,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
|
||||
#include <linux/init.h>
|
||||
|
||||
@@ -33,7 +33,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -59,7 +59,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -26,7 +26,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -25,7 +25,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
|
||||
#include <linux/init.h>
|
||||
|
||||
@@ -26,7 +26,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -24,7 +24,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
|
||||
#include <linux/init.h>
|
||||
|
||||
@@ -25,7 +25,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
|
||||
#include <linux/init.h>
|
||||
|
||||
@@ -25,7 +25,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -34,7 +34,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -23,7 +23,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -29,7 +29,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -30,7 +30,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -33,7 +33,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -46,7 +46,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -27,7 +27,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -63,7 +63,6 @@ static const char *version_str = "2.00 29/2/2000 Fons Rademakers";
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
|
||||
@@ -29,7 +29,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -43,7 +43,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -32,7 +32,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -26,7 +26,6 @@
|
||||
#include <linux/malloc.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "sensors.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "version.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -42,7 +42,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -43,7 +43,6 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/i2c.h>
|
||||
#include "version.h"
|
||||
#include "i2c-isa.h"
|
||||
#include "sensors.h"
|
||||
#include <linux/init.h>
|
||||
|
||||
|
||||
@@ -25,9 +25,10 @@ KERNELINCLUDEFILES :=
|
||||
ifneq ($(shell if grep -q '^CONFIG_SENSORS=y' $(LINUX)/.config; then echo 1; fi),1)
|
||||
KERNELINCLUDEFILES += $(MODULE_DIR)/sensors.h
|
||||
endif
|
||||
ifneq ($(shell if grep -q '^CONFIG_I2C_ISA=y' $(LINUX)/.config; then echo 1; fi),1)
|
||||
KERNELINCLUDEFILES += $(MODULE_DIR)/i2c-isa.h
|
||||
endif
|
||||
# No longer used, part of <linux/i2c.h>
|
||||
#ifneq ($(shell if grep -q '^CONFIG_I2C_ISA=y' $(LINUX)/.config; then echo 1; fi),1)
|
||||
#KERNELINCLUDEFILES += $(MODULE_DIR)/i2c-isa.h
|
||||
#endif
|
||||
|
||||
install-all-kernel-include:
|
||||
if [ -n "$(KERNELINCLUDEFILES)" ] ; then \
|
||||
|
||||
+3
-399
@@ -18,405 +18,10 @@
|
||||
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#ifndef SENSORS_SENSORS_H
|
||||
#define SENSORS_SENSORS_H
|
||||
#ifndef SENSORS_NSENSORS_H
|
||||
#define SENSORS_NSENSORS_H
|
||||
|
||||
#ifdef __KERNEL__
|
||||
|
||||
/* Next two must be included before sysctl.h can be included, in 2.0 kernels */
|
||||
#include <linux/types.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/sysctl.h>
|
||||
|
||||
/* The type of callback functions used in sensors_{proc,sysctl}_real */
|
||||
typedef void (*sensors_real_callback) (struct i2c_client * client,
|
||||
int operation, int ctl_name,
|
||||
int *nrels_mag, long *results);
|
||||
|
||||
/* Values for the operation field in the above function type */
|
||||
#define SENSORS_PROC_REAL_INFO 1
|
||||
#define SENSORS_PROC_REAL_READ 2
|
||||
#define SENSORS_PROC_REAL_WRITE 3
|
||||
|
||||
/* These funcion reads or writes a 'real' value (encoded by the combination
|
||||
of an integer and a magnitude, the last is the power of ten the value
|
||||
should be divided with) to a /proc/sys directory. To use these functions,
|
||||
you must (before registering the ctl_table) set the extra2 field to the
|
||||
client, and the extra1 field to a function of the form:
|
||||
void func(struct i2c_client *client, int operation, int ctl_name,
|
||||
int *nrels_mag, long *results)
|
||||
This last function can be called for three values of operation. If
|
||||
operation equals SENSORS_PROC_REAL_INFO, the magnitude should be returned
|
||||
in nrels_mag. If operation equals SENSORS_PROC_REAL_READ, values should
|
||||
be read into results. nrels_mag should return the number of elements
|
||||
read; the maximum number is put in it on entry. Finally, if operation
|
||||
equals SENSORS_PROC_REAL_WRITE, the values in results should be
|
||||
written to the chip. nrels_mag contains on entry the number of elements
|
||||
found.
|
||||
In all cases, client points to the client we wish to interact with,
|
||||
and ctl_name is the SYSCTL id of the file we are accessing. */
|
||||
extern int sensors_sysctl_real(ctl_table * table, int *name, int nlen,
|
||||
void *oldval, size_t * oldlenp,
|
||||
void *newval, size_t newlen,
|
||||
void **context);
|
||||
extern int sensors_proc_real(ctl_table * ctl, int write, struct file *filp,
|
||||
void *buffer, size_t * lenp);
|
||||
|
||||
|
||||
|
||||
/* These rather complex functions must be called when you want to add or
|
||||
delete an entry in /proc/sys/dev/sensors/chips (not yet implemented). It
|
||||
also creates a new directory within /proc/sys/dev/sensors/.
|
||||
ctl_template should be a template of the newly created directory. It is
|
||||
copied in memory. The extra2 field of each file is set to point to client.
|
||||
If any driver wants subdirectories within the newly created directory,
|
||||
these functions must be updated! */
|
||||
extern int sensors_register_entry(struct i2c_client *client,
|
||||
const char *prefix,
|
||||
ctl_table * ctl_template,
|
||||
struct module *controlling_mod);
|
||||
|
||||
extern void sensors_deregister_entry(int id);
|
||||
|
||||
|
||||
/* A structure containing detect information.
|
||||
Force variables overrule all other variables; they force a detection on
|
||||
that place. If a specific chip is given, the module blindly assumes this
|
||||
chip type is present; if a general force (kind == 0) is given, the module
|
||||
will still try to figure out what type of chip is present. This is useful
|
||||
if for some reasons the detect for SMBus or ISA address space filled
|
||||
fails.
|
||||
probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
|
||||
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
|
||||
the ISA bus, -1 for any I2C bus), the second is the address.
|
||||
kind: The kind of chip. 0 equals any chip.
|
||||
*/
|
||||
struct sensors_force_data {
|
||||
unsigned short *force;
|
||||
unsigned short kind;
|
||||
};
|
||||
|
||||
/* A structure containing the detect information.
|
||||
normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END.
|
||||
A list of I2C addresses which should normally be examined.
|
||||
normal_i2c_range: filled in by the module writer. Terminated by
|
||||
SENSORS_I2C_END
|
||||
A list of pairs of I2C addresses, each pair being an inclusive range of
|
||||
addresses which should normally be examined.
|
||||
normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
|
||||
A list of ISA addresses which should normally be examined.
|
||||
normal_isa_range: filled in by the module writer. Terminated by
|
||||
SENSORS_ISA_END
|
||||
A list of triples. The first two elements are ISA addresses, being an
|
||||
range of addresses which should normally be examined. The third is the
|
||||
modulo parameter: only addresses which are 0 module this value relative
|
||||
to the first address of the range are actually considered.
|
||||
probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
|
||||
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
|
||||
the ISA bus, -1 for any I2C bus), the second is the address. These
|
||||
addresses are also probed, as if they were in the 'normal' list.
|
||||
probe_range: insmod parameter. Initialize this list with SENSORS_I2C_END
|
||||
values.
|
||||
A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
|
||||
the ISA bus, -1 for any I2C bus), the second and third are addresses.
|
||||
These form an inclusive range of addresses that are also probed, as
|
||||
if they were in the 'normal' list.
|
||||
ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values.
|
||||
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
|
||||
the ISA bus, -1 for any I2C bus), the second is the I2C address. These
|
||||
addresses are never probed. This parameter overrules 'normal' and
|
||||
'probe', but not the 'force' lists.
|
||||
ignore_range: insmod parameter. Initialize this list with SENSORS_I2C_END
|
||||
values.
|
||||
A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
|
||||
the ISA bus, -1 for any I2C bus), the second and third are addresses.
|
||||
These form an inclusive range of I2C addresses that are never probed.
|
||||
This parameter overrules 'normal' and 'probe', but not the 'force' lists.
|
||||
force_data: insmod parameters. A list, ending with an element of which
|
||||
the force field is NULL.
|
||||
*/
|
||||
struct sensors_address_data {
|
||||
unsigned short *normal_i2c;
|
||||
unsigned short *normal_i2c_range;
|
||||
unsigned int *normal_isa;
|
||||
unsigned int *normal_isa_range;
|
||||
unsigned short *probe;
|
||||
unsigned short *probe_range;
|
||||
unsigned short *ignore;
|
||||
unsigned short *ignore_range;
|
||||
struct sensors_force_data *forces;
|
||||
};
|
||||
|
||||
/* Internal numbers to terminate lists */
|
||||
#define SENSORS_I2C_END 0xfffe
|
||||
#define SENSORS_ISA_END 0xfffefffe
|
||||
|
||||
/* The numbers to use to set an ISA or I2C bus address */
|
||||
#define SENSORS_ISA_BUS 9191
|
||||
#define SENSORS_ANY_I2C_BUS 0xffff
|
||||
|
||||
/* The length of the option lists */
|
||||
#define SENSORS_MAX_OPTS 48
|
||||
|
||||
/* Default fill of many variables */
|
||||
#define SENSORS_DEFAULTS {SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END, \
|
||||
SENSORS_I2C_END, SENSORS_I2C_END, SENSORS_I2C_END}
|
||||
|
||||
/* This is ugly. We need to evaluate SENSORS_MAX_OPTS before it is
|
||||
stringified */
|
||||
#define SENSORS_MODPARM_AUX1(x) "1-" #x "h"
|
||||
#define SENSORS_MODPARM_AUX(x) SENSORS_MODPARM_AUX1(x)
|
||||
#define SENSORS_MODPARM SENSORS_MODPARM_AUX(SENSORS_MAX_OPTS)
|
||||
|
||||
/* SENSORS_MODULE_PARM creates a module parameter, and puts it in the
|
||||
module header */
|
||||
#define SENSORS_MODULE_PARM(var,desc) \
|
||||
static unsigned short var[SENSORS_MAX_OPTS] = SENSORS_DEFAULTS; \
|
||||
MODULE_PARM(var,SENSORS_MODPARM); \
|
||||
MODULE_PARM_DESC(var,desc)
|
||||
|
||||
/* SENSORS_MODULE_PARM creates a 'force_*' module parameter, and puts it in
|
||||
the module header */
|
||||
#define SENSORS_MODULE_PARM_FORCE(name) \
|
||||
SENSORS_MODULE_PARM(force_ ## name, \
|
||||
"List of adapter,address pairs which are unquestionably" \
|
||||
" assumed to contain a `" # name "' chip")
|
||||
|
||||
|
||||
/* This defines several insmod variables, and the addr_data structure */
|
||||
#define SENSORS_INSMOD \
|
||||
SENSORS_MODULE_PARM(probe, \
|
||||
"List of adapter,address pairs to scan additionally"); \
|
||||
SENSORS_MODULE_PARM(probe_range, \
|
||||
"List of adapter,start-addr,end-addr triples to scan " \
|
||||
"additionally"); \
|
||||
SENSORS_MODULE_PARM(ignore, \
|
||||
"List of adapter,address pairs not to scan"); \
|
||||
SENSORS_MODULE_PARM(ignore_range, \
|
||||
"List of adapter,start-addr,end-addr triples not to " \
|
||||
"scan"); \
|
||||
static struct sensors_address_data addr_data = \
|
||||
{normal_i2c, normal_i2c_range, \
|
||||
normal_isa, normal_isa_range, \
|
||||
probe, probe_range, \
|
||||
ignore, ignore_range, \
|
||||
forces}
|
||||
|
||||
/* The following functions create an enum with the chip names as elements.
|
||||
The first element of the enum is any_chip. These are the only macros
|
||||
a module will want to use. */
|
||||
|
||||
#define SENSORS_INSMOD_0 \
|
||||
enum chips { any_chip }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip},{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
#define SENSORS_INSMOD_1(chip1) \
|
||||
enum chips { any_chip, chip1 }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip1); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip},\
|
||||
{force_ ## chip1,chip1}, \
|
||||
{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
#define SENSORS_INSMOD_2(chip1,chip2) \
|
||||
enum chips { any_chip, chip1, chip2 }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip1); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip2); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip}, \
|
||||
{force_ ## chip1,chip1}, \
|
||||
{force_ ## chip2,chip2}, \
|
||||
{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
#define SENSORS_INSMOD_3(chip1,chip2,chip3) \
|
||||
enum chips { any_chip, chip1, chip2, chip3 }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip1); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip2); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip3); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip}, \
|
||||
{force_ ## chip1,chip1}, \
|
||||
{force_ ## chip2,chip2}, \
|
||||
{force_ ## chip3,chip3}, \
|
||||
{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \
|
||||
enum chips { any_chip, chip1, chip2, chip3, chip4 }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip1); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip2); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip3); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip4); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip}, \
|
||||
{force_ ## chip1,chip1}, \
|
||||
{force_ ## chip2,chip2}, \
|
||||
{force_ ## chip3,chip3}, \
|
||||
{force_ ## chip4,chip4}, \
|
||||
{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \
|
||||
enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip1); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip2); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip3); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip4); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip5); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip}, \
|
||||
{force_ ## chip1,chip1}, \
|
||||
{force_ ## chip2,chip2}, \
|
||||
{force_ ## chip3,chip3}, \
|
||||
{force_ ## chip4,chip4}, \
|
||||
{force_ ## chip5,chip5}, \
|
||||
{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \
|
||||
enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip1); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip2); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip3); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip4); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip5); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip6); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip}, \
|
||||
{force_ ## chip1,chip1}, \
|
||||
{force_ ## chip2,chip2}, \
|
||||
{force_ ## chip3,chip3}, \
|
||||
{force_ ## chip4,chip4}, \
|
||||
{force_ ## chip5,chip5}, \
|
||||
{force_ ## chip6,chip6}, \
|
||||
{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \
|
||||
enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \
|
||||
SENSORS_MODULE_PARM(force, \
|
||||
"List of adapter,address pairs to boldly assume " \
|
||||
"to be present"); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip1); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip2); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip3); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip4); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip5); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip6); \
|
||||
SENSORS_MODULE_PARM_FORCE(chip7); \
|
||||
static struct sensors_force_data forces[] = {{force,any_chip}, \
|
||||
{force_ ## chip1,chip1}, \
|
||||
{force_ ## chip2,chip2}, \
|
||||
{force_ ## chip3,chip3}, \
|
||||
{force_ ## chip4,chip4}, \
|
||||
{force_ ## chip5,chip5}, \
|
||||
{force_ ## chip6,chip6}, \
|
||||
{force_ ## chip7,chip7}, \
|
||||
{NULL}}; \
|
||||
SENSORS_INSMOD
|
||||
|
||||
typedef int sensors_found_addr_proc(struct i2c_adapter *adapter,
|
||||
int addr, unsigned short flags,
|
||||
int kind);
|
||||
|
||||
/* Detect function. It itterates over all possible addresses itself. For
|
||||
SMBus addresses, it will only call found_proc if some client is connected
|
||||
to the SMBus (unless a 'force' matched); for ISA detections, this is not
|
||||
done. */
|
||||
extern int sensors_detect(struct i2c_adapter *adapter,
|
||||
struct sensors_address_data *address_data,
|
||||
sensors_found_addr_proc * found_proc);
|
||||
|
||||
|
||||
/* This macro is used to scale user-input to sensible values in almost all
|
||||
chip drivers. */
|
||||
extern inline int SENSORS_LIMIT(long value, long low, long high)
|
||||
{
|
||||
if (value < low)
|
||||
return low;
|
||||
else if (value > high)
|
||||
return high;
|
||||
else
|
||||
return value;
|
||||
}
|
||||
|
||||
#endif /* def __KERNEL__ */
|
||||
|
||||
|
||||
/* The maximum length of the prefix */
|
||||
#define SENSORS_PREFIX_MAX 20
|
||||
|
||||
/* IDs -- Use DRIVERIDs 1000-1999 for sensors.
|
||||
Other drivers define the id in linux/i2c.h */
|
||||
#define I2C_DRIVERID_LM78 1002
|
||||
#define I2C_DRIVERID_LM75 1003
|
||||
#define I2C_DRIVERID_GL518 1004
|
||||
#define I2C_DRIVERID_EEPROM 1005
|
||||
#define I2C_DRIVERID_W83781D 1006
|
||||
#define I2C_DRIVERID_LM80 1007
|
||||
#define I2C_DRIVERID_ADM1021 1008
|
||||
#define I2C_DRIVERID_ADM9240 1009
|
||||
#define I2C_DRIVERID_LTC1710 1010
|
||||
#define I2C_DRIVERID_SIS5595 1011
|
||||
#define I2C_DRIVERID_ICSPLL 1012
|
||||
#define I2C_DRIVERID_BT869 1013
|
||||
#define I2C_DRIVERID_MAXILIFE 1014
|
||||
#define I2C_DRIVERID_MATORB 1015
|
||||
#define I2C_DRIVERID_GL520 1016
|
||||
#define I2C_DRIVERID_THMC50 1017
|
||||
#define I2C_DRIVERID_DDCMON 1018
|
||||
#define I2C_DRIVERID_VIA686A 1019
|
||||
#define I2C_DRIVERID_ADM1025 1020
|
||||
#define I2C_DRIVERID_LM87 1021
|
||||
#define I2C_DRIVERID_PCF8574 1022
|
||||
#define I2C_DRIVERID_MTP008 1023
|
||||
#define I2C_DRIVERID_DS1621 1024
|
||||
|
||||
/* Sysctl IDs */
|
||||
#ifdef DEV_HWMON
|
||||
#define DEV_SENSORS DEV_HWMON
|
||||
#else /* ndef DEV_HWMOM */
|
||||
#define DEV_SENSORS 2 /* The id of the lm_sensors directory within the
|
||||
dev table */
|
||||
#endif /* def DEV_HWMON */
|
||||
|
||||
#define SENSORS_CHIPS 1
|
||||
struct sensors_chips_data {
|
||||
int sysctl_id;
|
||||
char name[SENSORS_PREFIX_MAX + 13];
|
||||
};
|
||||
#include <linux/i2c-proc.h>
|
||||
|
||||
#define LM78_SYSCTL_IN0 1000 /* Volts * 100 */
|
||||
#define LM78_SYSCTL_IN1 1001
|
||||
@@ -833,4 +438,3 @@ struct sensors_chips_data {
|
||||
#define DS1621_SYSCTL_ENABLE 2002
|
||||
|
||||
#endif /* def SENSORS_SENSORS_H */
|
||||
|
||||
Reference in new issue
Block a user