Adjust -12V as99127f calculation +15% based

on empirical data. Still no datasheet.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1006 7894878c-1315-0410-8ee3-d5d059ff63e0

CHANGES

@@ -19,6 +19,7 @@ ask CVS about it:
 
 2.5.6 (2001????)
   File doc/FAQ: Updates
+  File sensors.conf.eg: Adjust as99127f -12V calculation
   Module lm78: Recognize chipid=0x20
   Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
   Module sensors: Add xxx_init() calls for drivers added to mkpatch in 2.5.5.

etc/sensors.conf.eg

@@ -139,9 +139,7 @@
 # yet supported; spaces at the end are ignored, though.
 
 
-
-
-
+##########################################################################
 #### Here begins the real configuration file
 
 chip "lm78-*" "lm78-j-*" "lm79-*" "w83781d-*" "sis5595-*"
@@ -270,6 +268,7 @@ chip "as99127f-*"
 
 # Same as above for w83782d except that in5 and in6 negative voltages
 # are computed as in the w83781d.
+# Asus won't release a datasheet so this is guesswork.
 
     label in0 "VCore 1"
     label in1 "VCore 2"
@@ -281,7 +280,9 @@ chip "as99127f-*"
 
     compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
     compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
-    compute in5 -(210/60.4)*@  ,  -@/(210/60.4)
+# Old calculation was about 15% low. Still guesswork - no datasheet!
+#    compute in5 -(210/60.4)*@  ,  -@/(210/60.4)
+    compute in5 -4*@  ,  -@/4
     compute in6 -(90.9/60.4)*@ ,  -@/(90.9/60.4)
 
 # set limits to  5% for the critical voltages