(mds) maxilife 99 support from Fons R.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@790 7894878c-1315-0410-8ee3-d5d059ff63e0

etc/sensors.conf.eg

@@ -425,34 +425,34 @@ chip "lm80-*"
     set in6_min -5 * 1.05
     set in6_max -5 * 0.95
 
-
 chip "maxilife-cg-*" "maxilife-co-*" "maxilife-as-*"
 
    label fan1  "HDD Fan"
    label fan2  "PCI Fan"
    label fan3  "CPU Fan"
+   ignore fan4
    
    label temp2 "PCI Temp"
    label temp4 "HDD Temp"
    label temp5 "CPU Temp"
+   ignore temp6
 
    label vid1  "V+12"
+   ignore vid5
 
 # vid1 need to be scaled by 6.337 other voltages 
 # require no scaling
 
    compute vid1 6.337*@ , @/6.337
 
-
 chip "maxilife-cg-*"
 
-#   invalid temp1
+   ignore temp1
    label temp3  "BX Temp"
    
    label vid2   "Vcpu1"
    label vid3   "Vcpu2"
-#   invalid vid4
-
+   ignore vid4
 
 chip "maxilife-co-*"
 
@@ -463,16 +463,34 @@ chip "maxilife-co-*"
    label vid3   "Vcpu2"
    label vid4   "VcacheL2"
 
-
 chip "maxilife-as-*"
 
-#   invalid temp1
-#   invalid temp3
+   ignore temp1
+   ignore temp3
 
    label vid2   "Vcpu"
-#   invalid vid3
-#   invalid vid4
+   ignore vid3
+   ignore vid4
 
+chip "maxilife-nba-*"
+
+   label fan1  "CPU Fan"
+   label fan2  "PCI Fan"
+   label fan3  "HDD Fan"
+   label fan4  "Heat Sink Fan"
+
+   label temp1  "CPU 1 Temp"
+   label temp2  "CPU 2 Temp"
+   label temp3  "PCI/Ambient Temp"
+   label temp4  "HDD Temp"
+   label temp5  "Motherboard Temp"
+   label temp6  "CPU Reference Temp"
+
+   label vid1  "V+12"
+   label vid2  "Vcpu1"
+   label vid3  "Vcpu2"
+   label vid4  "VcacheL2"
+   label vid5  "V-12"
 
 chip "via686a-*"
 

kernel/include/sensors.h

@@ -597,16 +597,23 @@ struct sensors_chips_data {
 #define MAXI_SYSCTL_FAN1   1101	/* Rotations/min */
 #define MAXI_SYSCTL_FAN2   1102	/* Rotations/min */
 #define MAXI_SYSCTL_FAN3   1103	/* Rotations/min */
+#define MAXI_SYSCTL_FAN4   1104	/* Rotations/min */
 #define MAXI_SYSCTL_TEMP1  1201	/* Degrees Celcius */
 #define MAXI_SYSCTL_TEMP2  1202	/* Degrees Celcius */
 #define MAXI_SYSCTL_TEMP3  1203	/* Degrees Celcius */
 #define MAXI_SYSCTL_TEMP4  1204	/* Degrees Celcius */
 #define MAXI_SYSCTL_TEMP5  1205	/* Degrees Celcius */
+#define MAXI_SYSCTL_TEMP6  1206	/* Degrees Celcius */
 #define MAXI_SYSCTL_PLL    1301	/* MHz */
-#define MAXI_SYSCTL_VID1   1401	/* Volts / 6.337 */
+#define MAXI_SYSCTL_VID1   1401	/* Volts / 6.337, for nba just Volts */
 #define MAXI_SYSCTL_VID2   1402	/* Volts */
 #define MAXI_SYSCTL_VID3   1403	/* Volts */
 #define MAXI_SYSCTL_VID4   1404	/* Volts */
+#define MAXI_SYSCTL_VID5   1405	/* Volts */
+#define MAXI_SYSCTL_LCD1   1501	/* Line 1 of LCD */
+#define MAXI_SYSCTL_LCD2   1502	/* Line 2 of LCD */
+#define MAXI_SYSCTL_LCD3   1503	/* Line 3 of LCD */
+#define MAXI_SYSCTL_LCD4   1504	/* Line 4 of LCD */
 #define MAXI_SYSCTL_ALARMS 2001	/* Bitvector (see below) */
 
 #define MAXI_ALARM_VID4      0x0001
@@ -621,6 +628,11 @@ struct sensors_chips_data {
 #define MAXI_ALARM_FAN2      0x2000
 #define MAXI_ALARM_FAN3      0x4000
 
+#define MAXI_ALARM_FAN       0x0100	/* To be used with  MaxiLife'99 */
+#define MAXI_ALARM_VID       0x0200	/* The MSB specifies which sensor */
+#define MAXI_ALARM_TEMP      0x0400	/* in the alarm group failed, i.e.: */
+#define MAXI_ALARM_VADD      0x0800	/* 0x0402 = TEMP2 failed = CPU2 temp */
+
 #define SIS5595_SYSCTL_IN0 1000	/* Volts * 100 */
 #define SIS5595_SYSCTL_IN1 1001
 #define SIS5595_SYSCTL_IN2 1002