update serverworks match string

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1155 7894878c-1315-0410-8ee3-d5d059ff63e0

CHANGES

@@ -26,6 +26,7 @@ ask CVS about it:
   Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
   Module i2c-amd756: Add AMD 766 support
   Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
+  Module i2c-piix4: Add Serverworks CSB5 support
   Module i2c-sis5595: Recognize unsupported chips and refuse to load
   Module adm1025: Fixed temp2 min/max writes
   Module ds1621: Add 12-bit precision mode
@@ -35,7 +36,7 @@ ask CVS about it:
   Program sensors: it87 updates
   Program sensors-detect: Fix ADM1024 and ADM1025 detection;
                           recognize unsupported SiS chips;
-                          recognize AMD 766.
+                          recognize AMD 766 and Serverworks CSB5.
 
 2.6.0 (20010612)
   NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!

README

@@ -38,7 +38,7 @@ At least the following I2C/SMBus adapters are supported:
   Intel I801 ICH/ICH0/ICH2 (used in Intel 810, 810E, 815E, 820, 840 chipsets)
   Intel PIIX4 (used in many Intel chipsets)
   Intel I810/I815 GMCH
-  ServerWorks OSB4
+  ServerWorks OSB4, CSB5
   SiS 5595
   3Dfx Voodoo 3 and Banshee
   VIA Technologies VT82C586B, VT82C596A/B, and VT82C686A

doc/busses/i2c-piix4

@@ -5,7 +5,7 @@ Status: Complete and well-tested
 Supported adapters:
   * Intel 82371AB PIIX4 and PIIX4E
     Datasheet: Publicly available at the Intel website
-  * ServerWorks southbridges
+  * ServerWorks OSB4 and CSB5 southbridges
     Datasheet: only available via NDA from ServerWorks
 
 Author: Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock
@@ -60,4 +60,4 @@ The PIIX4E is just an new version of the PIIX4; it is supported as well. The
 PIIX/PIIX3 does not implement an SMBus or I2C bus, so you can't use this
 driver on those mainboards.
 
-The ServerWorks Southbridge is identical to the PIIX4 in I2C support.
+The ServerWorks Southbridges are identical to the PIIX4 in I2C support.

kernel/busses/i2c-piix4.c

@@ -19,7 +19,13 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-/* Note: we assume there can only be one PIIX4, with one SMBus interface */
+/*
+   Supports:
+	Intel PIIX4
+	Serverworks OSB4, CSB5
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
 
 #include <linux/version.h>
 #include <linux/module.h>
@@ -145,7 +151,7 @@ static struct i2c_adapter piix4_adapter = {
 
 static int __initdata piix4_initialized;
 static unsigned short piix4_smba = 0;
-static kind = 0;
+static int kind = 0;
 
 /* Detect whether a PIIX4 can be found, and initialize it, where necessary.
    Note the differences between kernels with the old PCI BIOS interface and
@@ -493,7 +499,7 @@ int __init i2c_piix4_init(void)
 		return res;
 	}
 	piix4_initialized++;
-	sprintf(piix4_adapter.name, kind==1?"SMBus PIIX4 adapter at %04x":"SMBus OSB4 adapter at %04x",
+	sprintf(piix4_adapter.name, kind==1?"SMBus PIIX4 adapter at %04x":"SMBus OSB4/CSB5 adapter at %04x",
 		piix4_smba);
 	if ((res = i2c_add_adapter(&piix4_adapter))) {
 		printk

prog/detect/sensors-detect

@@ -401,7 +401,7 @@ use vars qw(@pci_adapters @chip_ids @undetectable_adapters);
        func => 0,
        procid => "ServerWorks South Bridge",
        driver => "i2c-piix4",
-       match => sub { $_[0] =~ /^SMBus OSB4 adapter at / },
+       match => sub { $_[0] =~ /^SMBus OSB4/ },
      } , 
      { 
        vendid => 0x1055,