update, clarify beep contents.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@985 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2001-01-13 16:52:42 +00:00
1 parent 7f5c52aa34
commit d546f0c37c
1 file changed
+24 -5
+24 -5
View File
@@ -1,5 +1,5 @@
Naming and data standards under /proc
-------------------------------------
Naming and data format standards under /proc
--------------------------------------------
The libsensors library offers an interface to the raw sensors data
through the sysctl interface. See the 'sysctl' file and the libsensors
@@ -11,12 +11,28 @@ the drivers follow, so that a program can access this data in a consistent way.
Note that not all chip drivers adhere to this standard.
We will attempt to migrate older drivers to this standard,
and ensure that new drivers follow this standard.
and ensure that new drivers follow this standard wherever possible.
If you are developing a userspace application please send us
feedback on this standard.
Note that motherboards vary widely in the connections to sensor chips.
There is no standard that ensures, for example, that the second
temperature sensor is connected to the CPU, or that the second
fan is on the CPU. Therefore, programs must provide a facility
for the user to label or bind /proc entries for display.
Sensor chips often have unused inputs that should be ignored
by user programs.
As each chip gets its own directory under /proc/sys/dev/sensors.
The format is either chip-i2c-bus-hexaddress or chip-isa-hexaddress.
(Exception - chip lm78-j has a '-' in it - should this be changed??)
All /proc values are integers or floating point numbers.
There is no facility in the lm_sensors package for drivers
to output general strings via /proc.
-------------------------------------------------------------------------
/proc entries are as follows:
@@ -29,8 +45,11 @@ alarms 1 Alarm bitmask.
Generally a straight representation of a chips' internal
alarm registers; no standard.
beep 2 Beep or interrupt bitmask.
Same format as 'alarms' with same bit locations.
beep 2 Beep/interrupt enable and bitmask.
The first value is 0 or 1 to globally disable
or enable the beeps.
The second value is a bitmask, with the
same format as 'alarms' with same bit locations.
fan[1-3] 2 Fan min and input value.
Two integers indicating RPM.