Add a default configuration section for the Winbond W83627THF.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@5886 7894878c-1315-0410-8ee3-d5d059ff63e0

CHANGES

@@ -4,6 +4,7 @@ lm-sensors CHANGES file
 SVN HEAD
   Makefile: Check for bison and flex
   libsensors: Add support for intrusion detection (#2370)
+  sensors.conf.defauit: Add a section for the W83627THF
   sensors: Display 3 decimal places in raw output
            Add support for intrusion detection (#2370)
   sensors-detect: Improve LM90 and W83L771 detection

etc/sensors.conf.default

@@ -266,6 +266,25 @@ chip "adm1030-*" "adm1031-*"
     label temp1 "M/B Temp"
 
 
+chip "w83627thf-*"
+
+    label in3 "+5V"
+    label in7 "5VSB"
+    label in8 "Vbat"
+
+    # Internal resistors
+    compute in3  @ * (1 + 34/51), @ / (1 + 34/51)
+    compute in7  @ * (1 + 34/51), @ / (1 + 34/51)
+
+    set in3_min  5.0 * 0.90
+    set in3_max  5.0 * 1.10
+    set in7_min  5.0 * 0.90
+    set in7_max  5.0 * 1.10
+# The battery voltage may or may not be monitored.
+#    set in8_min  3.0 * 0.90
+#    set in8_max  3.0 * 1.10
+
+
 chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*"
 
     label in0 "Vcore"