Drop DEFAULT_VRM, as it makes no sense to have a single default

VRM for all drivers. Same was done it Linux 2.6 some times ago.
Also comment out all "set vrm" lines in sensors.conf.eg, as Linux 2.6
now accurately deduces the VRM from the CPU model.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3190 7894878c-1315-0410-8ee3-d5d059ff63e0

CHANGES

@@ -20,12 +20,14 @@ ask CVS about it:
 2.9.3 (2005????)
   File doc/busses/i2c-viapro: Update (2.6 backport)
   File doc/chips/via686a: Update (2.6 backport)
+  File etc/sensors.conf.eg: Do not set vrm by default
   File i2c-dev.h: Fix union i2c_smbus_data definition
                   Sync i2c_msg definition with i2c.h (Hideki Iwamoto)
                   Add missing parentheses around macros
                   Drop I2C_FUNC_SMBUS_EMUL
                   Drop I2C_FUNC_SMBUS_*_PEC
                   Drop I2C_SMBUS_*_PEC
+  File sensors_vid.h: Drop default VRM
   Library: Big update to use libsysfs.  More TODO though.
            Fix bus matching code for Linux 2.6 (Karsten Petersen)
            Add f71805f support
@@ -54,8 +56,12 @@ ask CVS about it:
                Add PEC support for the ADM1032
   Module via686a: Cleanups
   Module w83627hf: Drop useless initialization step (2.6 backport)
+                   Fix in4 for W83627THF and W83637HF (Yuan Mu)
+                   Fix alarms (Yuan Mu)
+                   Preserve fan min on fan div change (Yuan Mu)
   Module w83781d: Drop W83697HF support (Grant Coady)
   Module w83l785ts: Minor cleanup (2.6 backport)
+  Modules vt1211, vt8231: Change default VRM to 9.1
   Program decode-dimms.pl: Add lookup tables for manufacturer names
                            Fix rounding error in PCxxxx speed computation
   Program i2cdump: Drop now useless #ifdef tests

etc/sensors.conf.eg

@@ -1981,7 +1981,9 @@ chip "vt1211-*" "vt8231-*"
     compute in4 ((@ * 100) - 3) / (0.1754 * 95.8), (@ * 0.1754 * 0.958) + .03
     compute in5 ((@ * 100) - 3) / (0.6296 * 95.8), (@ * 0.6296 * 0.958) + .03
 
-    set vrm 9.1
+# adjust this if your vid is wrong; see doc/vid
+#   set vrm 9.1
+
 #   set in0_min 2.5 * 0.95
 #   set in0_max 2.5 * 1.05
 #   set in1_min 2.5 * 0.95
@@ -2051,7 +2053,8 @@ chip "smsc47m1-*"
 # This example was tested vs. Asus P4S333
 #
 chip "asb100-*"
-    set vrm 9.0
+# adjust this if your vid is wrong; see doc/vid
+    #set vrm 9.0
 
     label in0 "VCore 1"
     set in0_min vid * 0.95
@@ -2171,7 +2174,8 @@ chip "lm85c-*" "adm1027-*" "adt7463-*" "lm85-*" "lm85b-*"
 #   ignore fan4
 
 # Set VRM version
-   set vrm  9.1   # Pentium 4
+# adjust this if your vid is wrong; see doc/vid
+#   set vrm  9.1   # Pentium 4
 
 # Set voltage limits
    set in0_min  1.5 * 0.95

kernel/chips/asb100.c

@@ -59,7 +59,7 @@ static unsigned short normal_i2c_range[] = { SENSORS_I2C_END };
 static unsigned int normal_isa[] = { SENSORS_ISA_END };
 static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
 
-/* default VRM to 9.0 instead of 8.2 */
+/* default VRM to 9.0 */
 #define ASB100_DEFAULT_VRM 90
 
 /* Insmod parameters */

kernel/chips/lm87.c

@@ -548,7 +548,7 @@ static void lm87_init_client(struct i2c_client *client)
 #endif
 	);
 
-	data->vrm = DEFAULT_VRM;
+	data->vrm = 82;
 
 	/* Start monitoring */
 	reg = lm87_read_value(client, LM87_REG_CONFIG);

kernel/chips/vt1211.c

@@ -479,7 +479,7 @@ static void vt1211_init_client(struct i2c_client *client)
 {
 	struct vt1211_data *data = client->data;
 
-	data->vrm = DEFAULT_VRM;
+	data->vrm = 91;
 	/* set "default" interrupt mode for alarms, which isn't the default */
 	vt1211_write_value(client, VT1211_REG_TEMP1_CONFIG, 0);
 	vt1211_write_value(client, VT1211_REG_TEMP2_CONFIG, 0);

kernel/chips/vt8231.c

@@ -451,7 +451,7 @@ static void vt8231_init_client(struct i2c_client *client)
 {
 	struct vt8231_data *data = client->data;
 
-	data->vrm = DEFAULT_VRM;
+	data->vrm = 91;
 	/* set "default" interrupt mode for alarms, which isn't the default */
 	vt8231_write_value(client, VT8231_REG_TEMP1_CONFIG, 0);
 	vt8231_write_value(client, VT8231_REG_TEMP2_CONFIG, 0);

kernel/include/sensors_vid.h

@@ -51,8 +51,6 @@
     to avoid floating point in the kernel.
 */
 
-#define DEFAULT_VRM	82
-
 static inline int vid_from_reg(int val, int vrm)
 {
 	int vid;