updates

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1986 7894878c-1315-0410-8ee3-d5d059ff63e0

doc/chips/w83627hf

@@ -9,9 +9,9 @@ Supported chips:
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: Publicly available at the Winbond website
   * Winbond W83627THF (ISA accesses ONLY)
-    Prefix 'w83627hf'
+    Prefix 'w83627thf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: unavailable
+    Datasheet: Publicly available at the Winbond website
   * Winbond W83697HF (ISA accesses ONLY)
     Prefix 'w83697hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
@@ -31,6 +31,8 @@ Module Parameters
 * force_w83627hf: short array (min = 1, max = 48)
   List of adapter,address pairs which are unquestionably assumed to contain
   a `w83781d' chip
+* force_w83627thf:
+  Ditto
 * force_w83697hf:
   Ditto
 * ignore: short array (min = 1, max = 48)
@@ -52,7 +54,6 @@ Description
 This driver implements support for ISA accesses *only* for
 the Winbond W83627HF, W83627THF, and W83697HF Super I/O chips.
 We will refer to them collectively as Winbond chips.
-The 627THF is treated as a 627HF.
 
 This driver supports ISA accesses, which should be more reliable
 than i2c accesses. Also, for Tyan boards which contain both a
@@ -65,7 +66,7 @@ If you really want i2c accesses for these Super I/O chips,
 use the w83781d driver. However this is not the preferred method
 now that this ISA driver has been developed.
 
-For further information on the w83627hf/697hf driver, /proc values, etc.
+For further information on this driver, /proc values, etc.
 see the w83781d driver documentation.
 
 

doc/chips/xeontemp

@@ -1,4 +1,4 @@
-Kernel driver `adm1021.o'
+Kernel driver `xeontemp.o'
 =========================
 
 Status: Complete; tested for most devices except Xeon.
@@ -48,4 +48,10 @@ the adm1021 driver, and the address is one of
 adm1021 driver, temp1 is invalid but temp2 looks correct, then
 it is likely you should use this driver instead.
 
-See the documentation for adm1021 for more information.
+See the adm1021 documentation for more information.
+
+Author/Maintainer
+-----------------
+Mark D. Studebaker (mdsxyz123@yahoo.com).
+Derived from the adm1021 driver.
+Send requests to the sensors@stimpy.netroedge.com mailing list.