Spelling fixes. Contributed by Steven Cole.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2994 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Jean Delvare committed 2005-05-10 18:43:48 +00:00
1 parent 5e85be41de
commit fcc01c5c83
6 files changed
+14 -14

No files matched your search

+3 -3
View File
@@ -321,7 +321,7 @@ static void ds1621_init_client(struct i2c_client *client)
int reg;
reg = ds1621_read_value(client, DS1621_REG_CONF);
/* start the continous conversion */
/* start the continuous conversion */
if(reg & 0x01)
ds1621_write_value(client, DS1621_REG_CONF, reg & 0xfe);
}
@@ -362,7 +362,7 @@ static void ds1621_update_client(struct i2c_client *client)
ds1621_write_value(client, DS1621_COM_START, 0);
}
/* reset alarms if neccessary */
/* reset alarms if necessary */
new_conf = data->conf;
if (data->temp < data->temp_over)
new_conf &= ~DS1621_ALARM_TEMP_HIGH;
@@ -440,7 +440,7 @@ void ds1621_enable(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
/* If you really screw up your chip (like I did) this is */
/* sometimes needed to (re)start the continous conversion */
/* sometimes needed to (re)start the continuous conversion */
/* there is no data to read so this might hang your SMBus! */
struct ds1621_data *data = client->data;
+2 -2
View File
@@ -622,7 +622,7 @@ static int it87_detach_client(struct i2c_client *client)
return 0;
}
/* The SMBus locks itself, but ISA access must be locked explicitely!
/* The SMBus locks itself, but ISA access must be locked explicitly!
We don't want to lock the whole ISA bus, so we lock each client
separately.
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
@@ -642,7 +642,7 @@ static int it87_read_value(struct i2c_client *client, u8 reg)
return i2c_smbus_read_byte_data(client, reg);
}
/* The SMBus locks itself, but ISA access muse be locked explicitely!
/* The SMBus locks itself, but ISA access muse be locked explicitly!
We don't want to lock the whole ISA bus, so we lock each client
separately.
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+2 -2
View File
@@ -99,9 +99,9 @@ SENSORS_INSMOD_1(lm63);
* Conversions and various macros
* For tachometer counts, the LM63 uses 16-bit values.
* For local temperature and high limit, remote critical limit and hysteresis
* value, it uses signed 8-bit values with LSB = 1 degree Celcius.
* value, it uses signed 8-bit values with LSB = 1 degree Celsius.
* For remote temperature, low and high limits, it uses signed 11-bit values
* with LSB = 0.125 degree Celcius, left-justified in 16-bit registers.
* with LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
*/
#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \
+2 -2
View File
@@ -430,7 +430,7 @@ static int lm78_detach_client(struct i2c_client *client)
return 0;
}
/* The SMBus locks itself, but ISA access must be locked explicitely!
/* The SMBus locks itself, but ISA access must be locked explicitly!
We don't want to lock the whole ISA bus, so we lock each client
separately.
We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
@@ -450,7 +450,7 @@ static int lm78_read_value(struct i2c_client *client, u8 reg)
return i2c_smbus_read_byte_data(client, reg);
}
/* The SMBus locks itself, but ISA access muse be locked explicitely!
/* The SMBus locks itself, but ISA access muse be locked explicitly!
We don't want to lock the whole ISA bus, so we lock each client
separately.
We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks,
+1 -1
View File
@@ -80,7 +80,7 @@ SENSORS_INSMOD_1(lm83);
/*
* Conversions and various macros
* The LM83 uses signed 8-bit values with LSB = 1 degree Celcius.
* The LM83 uses signed 8-bit values with LSB = 1 degree Celsius.
*/
#define TEMP_FROM_REG(val) (val)
+4 -4
View File
@@ -19,7 +19,7 @@
* Complete datasheets can be obtained from National's website at:
* http://www.national.com/pf/LM/LM89.html
* http://www.national.com/pf/LM/LM99.html
* Note that there is no way to differenciate between both chips.
* Note that there is no way to differentiate between both chips.
*
* This driver also supports the LM86, another sensor chip made by
* National Semiconductor. It is exactly similar to the LM90 except it
@@ -39,7 +39,7 @@
* chips made by Maxim. These chips are similar to the LM86. Complete
* datasheet can be obtained at Maxim's website at:
* http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Note that there is no easy way to differenciate between the three
* Note that there is no easy way to differentiate between the three
* variants. The extra address and features of the MAX6659 are not
* supported by this driver.
*
@@ -144,9 +144,9 @@ SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461);
/*
* Conversions and various macros
* For local temperatures and limits, critical limits and the hysteresis
* value, the LM90 uses signed 8-bit values with LSB = 1 degree Celcius.
* value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
* For remote temperatures and limits, it uses signed 11-bit values with
* LSB = 0.125 degree Celcius, left-justified in 16-bit registers.
* LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
*/
#define TEMP1_FROM_REG(val) (val)