mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-24 12:04:33 +00:00
(Phil) Updating Constantine's RPM specs for Lm_sensors.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@809 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Philip Edelbrock committed
1 parent
3bcef963d5
commit
ff69e2cd4a
3 files changed
+198
-21
No files matched your search
+9
-4
@@ -1,5 +1,9 @@
|
||||
##by Constantine Gavrilov <const-g@xpert.com>
|
||||
|
||||
Use lm_sensors-rh.spec to build against stock kernels of RedHat based
|
||||
distributions.
|
||||
Use lm_sesnosrs.spec to build against custom built kernels.
|
||||
|
||||
Short instructions on how to build:
|
||||
|
||||
1) Put lm_sesnosrs.spec into SPECS directory of your rpm tree
|
||||
@@ -12,9 +16,11 @@ Short instructions on how to build:
|
||||
3) Adjust the following variables in lm_sesnosrs.spec:
|
||||
a) prefix - where the stuff gets installed;
|
||||
b) kversion - kernel version you are running;
|
||||
c) ver - version of lm_sensors you are compiling (if necessary);
|
||||
d) Group - to which groups the packages belong (if necessary).
|
||||
e) If i2c has been installed into a location defferent form prefix or /usr,
|
||||
c) mversion (if necessary) - defines path for modules' install (equal to
|
||||
kversion by default) -- modules will be installed to /lib/modules/%{mversion}.
|
||||
d) ver - version of lm_sensors you are compiling (if necessary);
|
||||
e) Group - to which groups the packages belong (if necessary).
|
||||
f) If i2c has been installed into a location defferent form prefix or /usr,
|
||||
you must ajust I2C_HEADERS as well.
|
||||
|
||||
4) Type `rpm -bb lm_sensors.spec' from the SPECS directory.
|
||||
@@ -57,4 +63,3 @@ resulting package dependable on the specific version of the kernel.
|
||||
|
||||
For help on building this rpms, suggestions, comments, etc, you may contact me
|
||||
at <const-g@xpert.com> .
|
||||
|
||||
@@ -0,0 +1,172 @@
|
||||
##This source RPM build the foloowing binary packages:
|
||||
## lm_sensors -- user space stuff
|
||||
## lm_sensors-devel -- user space stuff for the application development
|
||||
## lm_sensors-drivers -- kernel space drivers.
|
||||
|
||||
##Dependencies: lm_sensors requires lm_sensors_drivers
|
||||
## lm_sensors-devel requires lm_sensors
|
||||
## lm_sensors-drivers requires new i2c code
|
||||
|
||||
## lm_sensors and lm_sensors-devel can be distributed easily as binary
|
||||
## packages. They will be compatible with different configurations.
|
||||
|
||||
## WARNING!!! lm_sensors-drivers must be compiled for the the same kernel
|
||||
## that will run on the target machine. This implies the same kernel
|
||||
## version and the same kernel configuration. Thus, this binary package
|
||||
## can be provided by distribution vendors only for their stock distribution
|
||||
## kernels. If you use a custom configured kernel, you must rebuild this
|
||||
## package. To protect the innocent, we define kversion and make the
|
||||
## resulting package dependable on the specific version of the kernel.
|
||||
|
||||
#This spec file is good for stock kernels of RedHat based distributions.
|
||||
#If you run a stock smp kernel, the package suitable for smp kernel will be
|
||||
#built. If you run a stock up kernel, the package suitable for up kernel will be
|
||||
#built.
|
||||
|
||||
## The only customizable variable is prefix.
|
||||
## If i2c has been installed into a location different from prefix or /usr;
|
||||
## you must define I2C_HEADERS below.
|
||||
## This package IS relocatable (change prefix to relocate).
|
||||
|
||||
%define prefix /usr
|
||||
|
||||
#Define your kernel version here.
|
||||
%define smptag %(uname -r| cut -f2 -d - |sed 's/[0-9]//g')
|
||||
%define versiontag %(uname -r|sed 's/smp//')
|
||||
%define kversion %(uname -r)
|
||||
%define kname kernel%(echo %{smptag}|sed 's/smp/-smp/')
|
||||
|
||||
%define I2C_HEADERS %(rpm -ql kernel-i2c|grep include/linux/i2c.h|head -1|sed 's!/linux/i2c.h!!')
|
||||
|
||||
%define name lm_sensors
|
||||
%define ver 2.5.0
|
||||
Summary: Hardware Health Monitoring Tools
|
||||
Name: %{name}
|
||||
Version: %{ver}
|
||||
Release: 1rh
|
||||
Group: Applications/System
|
||||
Copyright: GPL
|
||||
Source0: http://www.lm-sensors.nu/lm-sensors/archive/%{name}-%{ver}.tar.gz
|
||||
Buildroot: /var/tmp/%{name}
|
||||
Docdir: %{prefix}/doc
|
||||
Requires: %{name}-drivers >= %{ver}
|
||||
Url: http://www.netroedge.com/~lm78/
|
||||
##For officially distributed packages, please sign below
|
||||
Packager: Constantine Gavrilov <const-g@xpert.com>
|
||||
Distribution: RedHat 6.1
|
||||
|
||||
%package drivers
|
||||
Summary: Chip and bus drivers for general SMBus access and hardware monitoring.
|
||||
Group: System Environment/Kernel
|
||||
Copyright: GPL
|
||||
Version: %{ver}%{smptag}
|
||||
Requires: kernel-i2c >= %{ver}, %{kname} = %{versiontag}
|
||||
|
||||
%package devel
|
||||
Summary: Development environment for hardware health monitoring applications
|
||||
Group: Development/Libraries
|
||||
Copyright: GPL
|
||||
Requires: %{name} = %{ver}
|
||||
|
||||
%description
|
||||
This package contains a collection of user space tools for general SMBus
|
||||
access and hardware monitoring. SMBus, also known as System Management Bus,
|
||||
is a protocol for communicating through a I2C ('I squared C') bus. Many modern
|
||||
mainboards have a System Management Bus. There are a lot of devices which can
|
||||
be connected to a SMBus; the most notable are modern memory chips with EEPROM
|
||||
memories and chips for hardware monitoring.
|
||||
|
||||
Most modern mainboards incorporate some form of hardware monitoring chips.
|
||||
These chips read things like chip temperatures, fan rotation speeds and
|
||||
voltage levels. There are quite a few different chips which can be used
|
||||
by mainboard builders for approximately the same results.
|
||||
|
||||
%description drivers
|
||||
This package contains a collection of kernel modules for general SMBus
|
||||
access and hardware monitoring. SMBus, also known as System Management Bus,
|
||||
is a protocol for communicating through a I2C ('I squared C') bus. Many modern
|
||||
mainboards have a System Management Bus. There are a lot of devices which can
|
||||
be connected to a SMBus; the most notable are modern memory chips with EEPROM
|
||||
memories and chips for hardware monitoring.
|
||||
|
||||
Most modern mainboards incorporate some form of hardware monitoring chips.
|
||||
These chips read things like chip temperatures, fan rotation speeds and
|
||||
voltage levels. There are quite a few different chips which can be used
|
||||
by mainboard builders for approximately the same results.
|
||||
|
||||
Hardware monitoring chips are often connected to the SMBus, but often they
|
||||
can also be connected to the ISA bus. The modules in this package usually
|
||||
support both ways of accessing them.
|
||||
|
||||
%description devel
|
||||
This package contains environment for development of user space applications
|
||||
for general SMBus access and hardware monitoring. SMBus, also known as
|
||||
System Management Bus, is a protocol for communicating through a I2C
|
||||
('I squared C') bus. Many modern mainboards have a System Management Bus.
|
||||
There are a lot of devices which can be connected to a SMBus; the most
|
||||
notable are modern memory chips with EEPROM memories and chips for hardware
|
||||
monitoring.
|
||||
|
||||
%prep
|
||||
%setup
|
||||
|
||||
%build
|
||||
#even for non-SMP systems parallel make will build faster
|
||||
if [ %{smptag} = smp ]; then
|
||||
make -j4 MODVER=1 SMP=1 I2C_HEADERS=%{I2C_HEADERS}
|
||||
else
|
||||
make -j4 MODVER=1 SMP=0 I2C_HEADERS=%{I2C_HEADERS}
|
||||
fi
|
||||
|
||||
%install
|
||||
rm -rf $RPM_BUILD_ROOT
|
||||
make install DESTDIR=$RPM_BUILD_ROOT PREFIX=%{prefix} \
|
||||
MODDIR=/lib/modules/%{kversion}/misc
|
||||
#back up stock config
|
||||
cp -a $RPM_BUILD_ROOT/etc/sensors.conf $RPM_BUILD_ROOT/etc/sensors.ex
|
||||
|
||||
%post
|
||||
ldconfig || /bin/true
|
||||
echo "please run \`%{prefix}/sbin/sensors-detect' to configure the sensors."
|
||||
|
||||
%postun
|
||||
ldconfig || /bin/true
|
||||
|
||||
%post drivers
|
||||
depmod -a || /bin/true
|
||||
|
||||
%postun drivers
|
||||
depmod -a || /bin/true
|
||||
|
||||
%files
|
||||
%config /etc/sensors.conf
|
||||
%config /etc/sensors.ex
|
||||
%{prefix}/bin/*
|
||||
%{prefix}/lib/lib*.so.*
|
||||
%dir %{prefix}/man/man1
|
||||
%dir %{prefix}/man/man5
|
||||
%{prefix}/man/man1/*
|
||||
%{prefix}/man/man5/*
|
||||
%{prefix}/sbin/*
|
||||
%doc BACKGROUND BUGS CHANGES CONTRIBUTORS INSTALL README TODO
|
||||
%doc doc/{FAQ,cvs,fan-divisors,modules,progs,temperature-sensors}
|
||||
%doc doc/{useful_addresses.html,version-2}
|
||||
|
||||
%files drivers
|
||||
%dir /lib/modules/%{kversion}
|
||||
%dir /lib/modules/%{kversion}/misc
|
||||
/lib/modules/%{kversion}/misc/*
|
||||
%{prefix}/include/linux/*
|
||||
%doc doc/busses doc/chips doc/developers doc/kernel
|
||||
|
||||
%files devel
|
||||
%dir %{prefix}/include/sensors
|
||||
%{prefix}/include/sensors/*.h
|
||||
%{prefix}/lib/*.a
|
||||
%{prefix}/lib/*.so
|
||||
%dir %{prefix}/man/man3
|
||||
%{prefix}/man/man3/*
|
||||
|
||||
%clean
|
||||
rm -rf $RPM_BUILD_ROOT
|
||||
rm -rf $RPM_BUILD_DIR/%{name}-%{ver}
|
||||
+17
-17
@@ -19,21 +19,23 @@
|
||||
## resulting package dependable on the specific version of the kernel.
|
||||
|
||||
## The only customizable variables are prefix and kversion.
|
||||
## If i2c has been installed into a location defferent form prefix or /usr;
|
||||
## If you have used a custom tug in the vesrion of your kernel rpm,
|
||||
## you may need to adjust mversion as well.
|
||||
|
||||
## If i2c has been installed into a location defferent from prefix or /usr;
|
||||
## you must define I2C_HEADERS below.
|
||||
## This package IS relocatable (change prefix to relocate).
|
||||
|
||||
%define prefix /usr/local
|
||||
%define I2C_HEADERS %{prefix}/include
|
||||
|
||||
#Define your kernel version here.
|
||||
%define kversion 2.2.14
|
||||
|
||||
#Another example for the above:
|
||||
#%define kversion 2.2.14-SMP
|
||||
%define mversion %{kversion}
|
||||
#Another example for the above: %define kversion 2.2.14-SMP
|
||||
|
||||
%define name lm_sensors
|
||||
%define I2C_HEADERS %{prefix}
|
||||
%define ver 2.4.5
|
||||
%define ver 2.5.0
|
||||
Summary: Hardware Health Monitoring Tools
|
||||
Name: %{name}
|
||||
Version: %{ver}
|
||||
@@ -52,9 +54,7 @@ Url: http://www.netroedge.com/~lm78/
|
||||
%package drivers
|
||||
Summary: Chip and bus drivers for general SMBus access and hardware monitoring.
|
||||
Group: Base/Kernel
|
||||
|
||||
###Latest RedHat distributions define a different Group:
|
||||
###Group: System Environment/Kernel
|
||||
###Latest RedHat distributions define a different Group: Group: System Environment/Kernel
|
||||
|
||||
Copyright: GPL
|
||||
Requires: kernel-i2c >= %{ver}, kernel = %{kversion}
|
||||
@@ -109,7 +109,7 @@ monitoring.
|
||||
|
||||
%build
|
||||
#even for non-SMP systems parallel make will build faster
|
||||
make -j4
|
||||
make -j4 I2C_HEADERS=%{I2C_HEADERS}
|
||||
|
||||
%install
|
||||
rm -rf $RPM_BUILD_ROOT
|
||||
@@ -119,6 +119,7 @@ cp -a $RPM_BUILD_ROOT/etc/sensors.conf $RPM_BUILD_ROOT/etc/sensors.ex
|
||||
|
||||
%post
|
||||
ldconfig || /bin/true
|
||||
echo "please run \`%{prefix}/sbin/sensors-detect' to configure the sensors."
|
||||
|
||||
%postun
|
||||
ldconfig || /bin/true
|
||||
@@ -133,20 +134,20 @@ depmod -a || /bin/true
|
||||
%config /etc/sensors.conf
|
||||
%config /etc/sensors.ex
|
||||
%{prefix}/bin/*
|
||||
%{prefix}/lib/lib*so*
|
||||
%{prefix}/lib/lib*.so.*
|
||||
%dir %{prefix}/man/man1
|
||||
%dir %{prefix}/man/man5
|
||||
%{prefix}/man/man1/*
|
||||
%{prefix}/man/man5/*
|
||||
%{prefix}/sbin/*
|
||||
%doc BACKGROUND BUGS CHANGES CONTRIBUTORS INSTALL README TODO
|
||||
%doc FAQ cvs fan-divisors modules progs temperature-sensors
|
||||
%doc useful_addresses.html version-2
|
||||
%doc doc/{FAQ,cvs,fan-divisors,modules,progs,temperature-sensors}
|
||||
%doc doc/{useful_addresses.html,version-2}
|
||||
|
||||
%files drivers
|
||||
%dir /lib/modules/%{kversion}
|
||||
%dir /lib/modules/%{kversion}/misc
|
||||
/lib/modules/%{kversion}/misc/*
|
||||
%dir /lib/modules/%{mversion}
|
||||
%dir /lib/modules/%{mversion}/misc
|
||||
/lib/modules/%{mversion}/misc/*
|
||||
%dir %{prefix}/include/linux
|
||||
%{prefix}/include/linux/*.h
|
||||
%doc doc/busses doc/chips doc/developers doc/kernel
|
||||
@@ -162,4 +163,3 @@ depmod -a || /bin/true
|
||||
%clean
|
||||
rm -rf $RPM_BUILD_ROOT
|
||||
rm -rf $RPM_BUILD_DIR/%{name}-%{ver}
|
||||
|
||||
Reference in new issue
Block a user