_sysctl_real
_register_entry
_proc_real
_detect
_deregister_entry
_chips_data
which were the global symbols renamed in i2c-proc.[ch] in the
i2c package.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1101 7894878c-1315-0410-8ee3-d5d059ff63e0
Leave the files there for now.
Remove old installed sensors.o in kernel/Module.mk.
sensors.c was moved to i2c-proc.c in the i2c package.
i2c-isa.h was appended to i2c.h in the i2c package.
Delete all but the SYSCTL and ALARMS definitions in sensors.h,
as the rest of the file was moved to i2c-proc.h in the i2c package.
Remove #include "i2c-isa.h" lines in all chip drivers and
in bus driver i2c-isa.c.
This all probably breaks mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1015 7894878c-1315-0410-8ee3-d5d059ff63e0
the horrible
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
They should now both work with 2.3 kernels (including 2.4 prepatches)
and very new 2.2 kernels (ie. 2.2.18 prepatches)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
Changes in sensors.c:
sensors_detect now skips addresses which are already taken. Even a
force parameter can not override this, as it could lead to major
problems.
For ISA addresses, the same is done; but the client drivers still need
a check if they claim more than one ISA address (as all of the current
ISA clients do).
Changes in chip drivers:
Removed the comment about needing address registration
Changes in i2cdetect.c:
Marks addresses which are already claimed
Changes in sensors-detect:
Warns when an address is already claimed, and skips it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@667 7894878c-1315-0410-8ee3-d5d059ff63e0
* Improved monitoring of /proc directories
Instead of doing:
proc_bus_i2c->fill_inode = &monitor_bus_i2c;
void monitor_bus_i2c(struct inode *inode, int fill)
{
if (fill)
MOD_INC_USE_COUNT;
else
MOD_DEC_USE_COUNT;
}
you can now simply set:
proc_bus_i2c->owner = THIS_MODULE;
and this is just as good!
* An old 2.3 problem seemingly never was resolved yet: instead of using
a *wait_queue directly, you have to use a wait_queue_head_t and
initialize it properly:
#if (LINUX_VERSION_CODE < 0x020301)
static struct wait_queue *pcf_wait = NULL;
#else
static wait_queue_head_t pcf_wait;
#endif
#if (LINUX_VERSION_CODE >= 0x020301)
init_waitqueue_head(&pcf_wait);
#endif
except for this, semantics remain the same (but using a plain
wait_queue_head_t instead of a pointer to a wait_queue)
* I had to change the semantics of sensors_register_entry slightly,
to make the monitoring of /proc/sys/dev/* files possible for kernels
2.3.27 and newer. It now takes an additional parameter, which you
can specify as THIS_MODULE.
* THIS_MODULE is only defined in kernels 2.3.13 and later; added
it to compat.h and the compatibility section of mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@640 7894878c-1315-0410-8ee3-d5d059ff63e0
* Removed several superfluous (struct i2c_client *) casts (they were left
from the time we had separate structs for smbus and isa)
* Removed the internal lists of registered clients
They have not been used for quite some time now, took memory space,
and limited the maximum number of clients that could be registered.
Also removed two small Makefile errors - I am happy I caught them before
the next release!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@582 7894878c-1315-0410-8ee3-d5d059ff63e0
the kernel.
* <kernel/init.h> is now included for all modules
* Initialization-time only functions and variables are marked with __init
* EXPORT_SYMBOL or EXPORT_NO_SYMBOLS declarations added
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@513 7894878c-1315-0410-8ee3-d5d059ff63e0
* The i2c package can no longer be compiled as part of the lm_sensors tree
* The archive of the i2c package is removed
* smbus, i2c-dev and i2c-proc modules and headers have been removed; they
are now completely integrated into the i2c package
* The fake i2c.h header has been removed; this also allowed us to remove
the ugly LM_SENSORS and TBD defines.
* A new variable I2C_HEADERS is introduced in the Makefile. This allows
us to install the i2c headers in, for example, /usr/local/include/linux.
* All files now include <linux/i2c.h> instead of "i2c.h" and "smbus.h"
Status: 'make dep' works, all the right include files are found. 'make all'
does not yet work.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@496 7894878c-1315-0410-8ee3-d5d059ff63e0
Detection is completely impossible, but sensors-detect now assumes with a
confidence of 1 (the lowest possible) that any chip in the LTC1710 address
range is a real LTC1710. Perhaps I should remove this again, as I don't
think this chip will be encountered 'in the wild' if your name is not Phil -
in which case you would have soldered it to your SMBus yourself, so you
should know what you are doing...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@372 7894878c-1315-0410-8ee3-d5d059ff63e0
device drivers. Specifically, I added these lines:
(in includes list)
#include "i2c-isa.h"
(Near beginning of *-attach-adapter function)
/* Make sure we aren't probing the ISA bus!! */
if (i2c_is_isa_adapter(adapter)) return 0;
This may be redundant is a couple of the files, but it shouldn't hurt.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@283 7894878c-1315-0410-8ee3-d5d059ff63e0
All our own code (ie. anything not in the i2c directory) compiles now without
warnings, even with WARN=1 (which sets -Wall -Wstrict-prototypes -Wshadow
-Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs
-Winline). There is one exception: the lex code (conf-lex.l) complains about
unused functions. That's flex' fault, not ours!
The i2c code still emits many warnings with the above flags; that's Simon's
problem.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@233 7894878c-1315-0410-8ee3-d5d059ff63e0
switch. It can switch two devices which each consume 300mA at 5V (or less).
This is good for fans, lights, or into relays for heftier stuff.
Here's what the usage looks like:
[root@penn sensors]# ls ltc1710-i2c-1-58/*
ltc1710-i2c-1-58/switch1
ltc1710-i2c-1-58/switch2
[root@penn sensors]# cat ltc1710-i2c-1-58/*
0
0
[root@penn sensors]# echo "1" > ltc1710-i2c-1-58/switch2
(blue LED turned on)
[root@penn sensors]# cat ltc1710-i2c-1-58/*
0
1
One problem with the device: It doesn't support reads. It ignores any
read transactions, so even detection with a read won't work. This
also means that the status of the switches has to be remembered and
can't be polled.
As simple as this device is, it is one of the few which actually
allows the computer to send signals OUT into the world to
control something.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@155 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark D. Studebaker