and sensors_chip_features_list arrays tend to track the same information.
So it's much more simple, and more efficient, to have a single array. I
decided to keep sensors_proc_chips, because it already has memory management
helpers. One nice side effect is that the arbitrary limit to the number of
supported chips is now gone. Another one is that some of the memory leaks
were fixed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4510 7894878c-1315-0410-8ee3-d5d059ff63e0
sensors_chip_features_list[]. Using only the prefix (as was done before)
makes it impossible to properly support multiple chips with the same prefix
but a different feature set.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4508 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fix the handling of temperature hysteresis. Hysteresis is not a
temperature limit by itself, but a property of temperature limit.
* Handle per-limit temperature alarms.
With these fixes, the ADM1032 is properly supported by the new code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4423 7894878c-1315-0410-8ee3-d5d059ff63e0
identify sysfs entries. Reasons for this rewrite / bugs fixed:
-Don't give features like alarms / sensor type / fault flag a
compute mapping only a normal mapping
-Don't generate features for sysfs entries like uvent, modalias, etc.
instead only generate features for features known by
sensors_feature_get_type()
-Sort the list of found features logically instead of sorted in alphabet order
of the sysfs entry. So now it starts with all in entries, then all fan and
then all temp. Just like the order of most entries in lib/chips.c. Also
this means that it now contains in0 - in10 in that order and not in0, in10,
in1 - in9
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4368 7894878c-1315-0410-8ee3-d5d059ff63e0
abituguru seems to work well with the new dynamic chip support and generic
chip printroutines. note: the abituguru code should be completly removed in
the future.
-comment k8temp entry in lib/chips.c and prog/sensors/main.c, as the
k8temp seems to work well with the new dynamic chip support and generic
chip printroutines. note: the k8temp code should be completly removed in
the future.
-make the match for the subtype exact instead of a strncmp, otherwise
an alarm_enable flag gets classified as an alarm, leading to all sensors who
have their alarm enabled getting an alarm reported, as the alarm_enabled gets
read as alarm.
-and do the same for the _input match to check if this is a main or subfeature
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4367 7894878c-1315-0410-8ee3-d5d059ff63e0
memory as part of another structure. This rather large patch fixes that by
making the smaller piece an explicit member of the larger.
I brought this patch into sync with the latest SVN, and tested it by comparing
objects files from the tree pre- and post- patch.
The remaining 99% of the credit goes to Bob Schlärmann <bob2@dsv.nl> for
creating the original patch... thanks Bob!
* Bob Schlärmann <bob2@dsv.nl> [2006-12-24 18:29:39 +0100]:
> The following patch changes all of the lib/chips.c entries and any function
> that uses sensors_chip_feature. Most of the conversion was done through a
> perl script, so if you don't agree with the syntax it'll be easy to change.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4287 7894878c-1315-0410-8ee3-d5d059ff63e0
I2C algorithms no longer have names in Linux 2.6, and anyway they are
implementation details user-space doesn't care about. No third party
application is known to have ever used this particular feature of
libsensors. "sensord" and "sensors" no longer do.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4208 7894878c-1315-0410-8ee3-d5d059ff63e0
First ran .../scripts/Lindent from Linux 2.6.x, then fixed up some
things that were particularly ugly. Verified the final result by
rebuilding and running 'objdump -d' on the before and after; there
were no differences.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4073 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch adds the files lib/sysfs.h and lib/sysfs.c, beginning with a rewrite
of the sysfs detection code (using libsyfs). In the process, I replaced two
poorly named globals with better names, and moved them to sysfs.c. The sysfs
detection now happens very early during library init, rather than later.
The long term plan is for the two global variables to disappear anyway, as
everything to do with sysfs should get moved into lib/sysfs.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3093 7894878c-1315-0410-8ee3-d5d059ff63e0
("set lines") to go unnoticed. lm78's fan3_div (which is read-only
but stored in a R/W file in procfs) was one of them.
Make sensors' error message in this case more explicit.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2692 7894878c-1315-0410-8ee3-d5d059ff63e0
> Current gcc versions warn when type punning is used, as this breaks the
> strict aliasing analysis gcc 3.3 does by default. When checking the causes
> for these warnings I discovered that sensors_malloc_array,
> sensors_free_array, sensors_add_array_el and sensors_add_array_els in
> lib/general.c all take a 'void **' for the list. This is plain wrong as
> the C standard only allow 'char *' and 'void *' to alias any other type, so
> if these functions should take a generic pointer, it *must* be a 'void *'
> that's internally cast to a 'void **'.
>
> The attached patch does this and adapts all places where these functions are
> called. Note that when done correctly, no cast what-so-ever in the calling
> code is needed.
>
> The patch is against current lm_sensors2 cvs version.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2345 7894878c-1315-0410-8ee3-d5d059ff63e0
vt1211 / vt8235 thermistor calculations. Add such calculations to
vt1211/vt8235 section in sensors.conf; bump library version to 1.4.0.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1667 7894878c-1315-0410-8ee3-d5d059ff63e0
This often-asked for, long-planned and somewhat-forgotten feature
makes it possible to tell libsensors-linked applications (like
the sensors program) that certain features should not be displayed.
This is very nice for things like unconnected temperature sensors
or fans.
Modifications to the library code, to the sensors program and to
the documentation and example sensors.conf file.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@676 7894878c-1315-0410-8ee3-d5d059ff63e0
Some basic support, in the form of sensors_get_all_features(), for chips that
are known to the library, but unknown to the application. prog/sensors has
a demo of how to use this, in function print_unknown_chip in chips.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@110 7894878c-1315-0410-8ee3-d5d059ff63e0
An expression can now refer to the value it has to compute (@), but also to
other values. This is now perfectly valid as an expression:
vid + in_min - in_max * 2 / @
Not that this is very sensible, but you get the idea. Please install the
new example config file, or replace all old 'val' occurences with '@'.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@107 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare