* Fix project homepage.
* Init scripts are in /etc/init.d on modern systems, rather than
/etc/rc.d/init.d. That way it works on Fedora, Suse and Gentoo, at
least.
* Don't tell the user to copy the init script if it's already there.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4131 7894878c-1315-0410-8ee3-d5d059ff63e0
* Give a name to Super-I/O chip families.
* Merge the two Winbond families.
* Be smarter when testing Super-I/O chips, read the device ID only once.
* When an unknown chip is found, print the ID only once.
* Reformat the warning message when a module isn't found.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4129 7894878c-1315-0410-8ee3-d5d059ff63e0
* Shorten the date part in revision string.
* Make the chip names more consistent.
* Align the result of ISA and Super-I/O probes.
* Replace "Failed!" with a less needlessly alarming "No".
* Make the ISA and Super-I/O probe results more compact.
* Adjust some explanations.
* Don't ask again before probing secondary Super-I/O address.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4128 7894878c-1315-0410-8ee3-d5d059ff63e0
This is needed because parse-edid is typically installed in one of these
directories, even though any user can use it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4126 7894878c-1315-0410-8ee3-d5d059ff63e0
* Kill the annoying blank space in front of half of the messages.
* Stop frightening the user with problems which might have happened some
years ago, but are very rare nowadays.
* Skip some messages on 2.6 kernels where they do not apply.
* Don't even mention i2c-dev if it is already loaded or build into the
kernel.
* Reword some messages.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4120 7894878c-1315-0410-8ee3-d5d059ff63e0
sense to try and continue as a non-root user, as we won't be able to load
modules, nor to probe i2c busses, nor to access the ISA ports. It's way
less confusing for the user to clearly state he/she needs to be root,
and stop.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4119 7894878c-1315-0410-8ee3-d5d059ff63e0
libsensors. The Linux 2.6 adm1026 driver uses the standard numebring
(from 1 to 8). Map fan0 to fan8 to make things work while keeping
confusion to the minimum (hopefully.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4118 7894878c-1315-0410-8ee3-d5d059ff63e0
heatsink and fan, and two 256 MB DDR SDRAM PC3200 memory modules. The
board has a Winbond W83627THF chip for hardware monitoring, and an
(hidden) 82801EB (ICH5) SMBus controller with SPD EEPROMs connected.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4103 7894878c-1315-0410-8ee3-d5d059ff63e0
Also update to display the (beep) properly due to the fact that the
w83791d beep enable mask is different than the alarm mask.
Patch from Sven Anders and Charles Spirakis.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4096 7894878c-1315-0410-8ee3-d5d059ff63e0
with other functions on some IT87xxF variants so the Linux 2.6 driver may
not present them forever.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4093 7894878c-1315-0410-8ee3-d5d059ff63e0
we don't use SMBus transactions the adapter doesn't support. This could
be extended to the transactions used during detection itself.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4086 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0
less I2C addresses by default than the script itself does. The feature
was never used, and I don't think it's particuarly useful, so removing
it for simpler code makes sense.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4082 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare