libsensors. The Linux 2.6 adm1026 driver uses the standard numebring
(from 1 to 8). Map fan0 to fan8 to make things work while keeping
confusion to the minimum (hopefully.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4118 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0
First ran .../scripts/Lindent from Linux 2.6.x, then fixed up some
things that were particularly ugly. Verified the final result by
rebuilding and running 'objdump -d' on the before and after; there
were no differences.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4073 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch enables the reading of temp1 (Reading3) from the VT1211.
Reading3 returns the V1211's internal temperature.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3246 7894878c-1315-0410-8ee3-d5d059ff63e0
in line with the new 2.6 driver. The most important changes are temp
inputs renumbering, and conversion formulas changes, because part of the
conversions are now done by the driver as required by the interface
standard.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3194 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch makes optional the sysfs support in libsensors. The default is to
*disable* sysfs support if a 2.4.x kernel is detected, for all other versions,
support will be enabled. This can be overridden in the top-level Makefile.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3096 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch replaces the I2C chip enumeration (through sysfs) in lib/proc.c
with new functions in lib/sysfs (using libsysfs). The patch also updates
the init code accordingly.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3095 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch replaces the I2C bus enumeration (through sysfs) in lib/proc.c
with a new function in lib/sysfs (using libsysfs). The patch also updates
the init code accordingly.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3094 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch adds the files lib/sysfs.h and lib/sysfs.c, beginning with a rewrite
of the sysfs detection code (using libsyfs). In the process, I replaced two
poorly named globals with better names, and moved them to sysfs.c. The sysfs
detection now happens very early during library init, rather than later.
The long term plan is for the two global variables to disappear anyway, as
everything to do with sysfs should get moved into lib/sysfs.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3093 7894878c-1315-0410-8ee3-d5d059ff63e0
This trivial patch links the libsysfs library to the libsensors library.
One needs to build and install sysfsutils first:
http://linux-diag.sourceforge.net/Sysfsutils.html
This patch is naive, at least to start. Later it will be made optional
depending on whether support for Linux 2.6.x is needed, or just 2.4.x.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3092 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch moves two macros from lib/proc.c to lib/data.h. The macros
pick up the "sensors_" prefix along the way. The motivation is the
same as the previous patch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3091 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch moves the chip and bus lists from lib/proc.c to lib/data.c.
The variables were already declared in lib/data.h. Motivation: when
support for kernel 2.4.x becomes optional, lib/proc.c may not even be
compiled into the library... but these variables are still needed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3090 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare