Copy sysctl enums to chip drivers from sensors.h for now,
as seen in drivers included in 2.5 tree. File no longer included
from kernel side.
Apply i2c-proc change in CVS tagged -km2.
Partial clean and sort of includes everywhere.
Add i2c-dev.h, as a partial copy from i2c.
Add to sensors.h from i2c-proc.h to compile things.
Remove i2c-isa.h.
Reflect header file changes to lib/ and prog/.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1705 7894878c-1315-0410-8ee3-d5d059ff63e0
Module refcounting using .owner, removing of inc/dec_use.
These require (yet unreleased) i2c 2.8.0+.
Named initializers everywhere. Unified namespace.
Cleanup for 2.5, remove EXPORT_NO_SYMBOLS, declare everything
static. Apply initcalls.
PCI device registration changes for busses started, replicating
from i2c-amd*. While everything does compile, nothing really
works. Well, maybe i2c-amd* ported back from 2.5 tree.
After updating your work directory, run
> cvs diff -u -r LAST-PRE-2-8-I2C > lm-2.8-patches-1
BEWARE: I have not even insmoded any of these yet.
To compile, you need i2c from cvs too.
For 2.4 kernel :
> cvs co -r lk2-4 i2c
For 2.5 kernel :
> cvs co i2c
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1698 7894878c-1315-0410-8ee3-d5d059ff63e0
_sysctl_real
_register_entry
_proc_real
_detect
_deregister_entry
_chips_data
which were the global symbols renamed in i2c-proc.[ch] in the
i2c package.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1101 7894878c-1315-0410-8ee3-d5d059ff63e0
Leave the files there for now.
Remove old installed sensors.o in kernel/Module.mk.
sensors.c was moved to i2c-proc.c in the i2c package.
i2c-isa.h was appended to i2c.h in the i2c package.
Delete all but the SYSCTL and ALARMS definitions in sensors.h,
as the rest of the file was moved to i2c-proc.h in the i2c package.
Remove #include "i2c-isa.h" lines in all chip drivers and
in bus driver i2c-isa.c.
This all probably breaks mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1015 7894878c-1315-0410-8ee3-d5d059ff63e0
the horrible
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
They should now both work with 2.3 kernels (including 2.4 prepatches)
and very new 2.2 kernels (ie. 2.2.18 prepatches)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
Initially, random values were put in the voltage registers. If iterate was
left at 0, these random values were put in /proc.
Solution: initialize voltage[0..2] with 0.
Frodo
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@709 7894878c-1315-0410-8ee3-d5d059ff63e0
Changes in sensors.c:
sensors_detect now skips addresses which are already taken. Even a
force parameter can not override this, as it could lead to major
problems.
For ISA addresses, the same is done; but the client drivers still need
a check if they claim more than one ISA address (as all of the current
ISA clients do).
Changes in chip drivers:
Removed the comment about needing address registration
Changes in i2cdetect.c:
Marks addresses which are already claimed
Changes in sensors-detect:
Warns when an address is already claimed, and skips it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@667 7894878c-1315-0410-8ee3-d5d059ff63e0
Reasons varied from typos (_ instead of -) to static declarations that
should have been extern.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@646 7894878c-1315-0410-8ee3-d5d059ff63e0
* Improved monitoring of /proc directories
Instead of doing:
proc_bus_i2c->fill_inode = &monitor_bus_i2c;
void monitor_bus_i2c(struct inode *inode, int fill)
{
if (fill)
MOD_INC_USE_COUNT;
else
MOD_DEC_USE_COUNT;
}
you can now simply set:
proc_bus_i2c->owner = THIS_MODULE;
and this is just as good!
* An old 2.3 problem seemingly never was resolved yet: instead of using
a *wait_queue directly, you have to use a wait_queue_head_t and
initialize it properly:
#if (LINUX_VERSION_CODE < 0x020301)
static struct wait_queue *pcf_wait = NULL;
#else
static wait_queue_head_t pcf_wait;
#endif
#if (LINUX_VERSION_CODE >= 0x020301)
init_waitqueue_head(&pcf_wait);
#endif
except for this, semantics remain the same (but using a plain
wait_queue_head_t instead of a pointer to a wait_queue)
* I had to change the semantics of sensors_register_entry slightly,
to make the monitoring of /proc/sys/dev/* files possible for kernels
2.3.27 and newer. It now takes an additional parameter, which you
can specify as THIS_MODULE.
* THIS_MODULE is only defined in kernels 2.3.13 and later; added
it to compat.h and the compatibility section of mkpatch.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@640 7894878c-1315-0410-8ee3-d5d059ff63e0
Most important change: GL518SM-rev00 can't use kernel threads on 2.0 and
early 2.1 kernels
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@563 7894878c-1315-0410-8ee3-d5d059ff63e0
* removed algorithm registration in i2c-isa
* renamed i2c-via2.o to i2c-viapro.o in the driver messages
* added detection for new drivers in sensors-detect script
* minor gl518sm fix
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@522 7894878c-1315-0410-8ee3-d5d059ff63e0
* GL518 & GL520: setting fan{1,2}_min 0 masks alarm & beep
* GL518SM rev 0x00 : Run iteration code in kernel thread
Every run of "sensors" now reports results of the previous
iteration run, and triggers a new one.
* GL520: Reads all inputs now
* GL520: Select between Temp2 or -12V input.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@520 7894878c-1315-0410-8ee3-d5d059ff63e0
the kernel.
* <kernel/init.h> is now included for all modules
* Initialization-time only functions and variables are marked with __init
* EXPORT_SYMBOL or EXPORT_NO_SYMBOLS declarations added
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@513 7894878c-1315-0410-8ee3-d5d059ff63e0
* Restructured iteration code for rev 0x00
Two modes already:
0 no iteration, no delay, reads only vin3, vin0-2 = 0
1 does iteration, delays reads approx. 8 seconds
To be added:
2 does iteration in background, no delay for user apps
In this mode the results of the last iteration loop are shown,
and then a new iteration loop is triggered.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@510 7894878c-1315-0410-8ee3-d5d059ff63e0
* The i2c package can no longer be compiled as part of the lm_sensors tree
* The archive of the i2c package is removed
* smbus, i2c-dev and i2c-proc modules and headers have been removed; they
are now completely integrated into the i2c package
* The fake i2c.h header has been removed; this also allowed us to remove
the ugly LM_SENSORS and TBD defines.
* A new variable I2C_HEADERS is introduced in the Makefile. This allows
us to install the i2c headers in, for example, /usr/local/include/linux.
* All files now include <linux/i2c.h> instead of "i2c.h" and "smbus.h"
Status: 'make dep' works, all the right include files are found. 'make all'
does not yet work.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@496 7894878c-1315-0410-8ee3-d5d059ff63e0
The HW still generates the alarm, but the output is masked. The mask comes
useful also once I start fine-tuning that iteration code for reading all 4
voltages.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@478 7894878c-1315-0410-8ee3-d5d059ff63e0
* The library can now read GL518SM revision 0x00 voltages (in the worst case,
it will read zeros if the module was not inserted with readall=1)
* The readall parameter is now documented through MODULE_PARM_DESC
* Note my remarks in the TODO file
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@403 7894878c-1315-0410-8ee3-d5d059ff63e0
Like the LM78 before, all chips now handle strange values written to /proc/...
with grace - that is, they convert them to the most sane value considering
the circumstances, instead of reacting with strange resulting values
(note that they were already crash-free).
I also removed a factor '2' in the computation of the fan speeds in the
gl518sm module. This is conforming with the sheet; if your fan gives two
'ticks' for each rotation, just modify sensors.conf.
I tried to introduce rounding and limit checking to the maxilife module.
The VID computation is not yet rounded - I need the real formula for that.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@382 7894878c-1315-0410-8ee3-d5d059ff63e0
gl518sm module
Besides the usual parameters, eeprom.o understands insmod parameter 'checksum'.
Set it to one (ie. 'modprobe eeprom checksum=1') to make it ignore any
chips which do not come through the checksum.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@371 7894878c-1315-0410-8ee3-d5d059ff63e0
Improved bounds checking for FAN_TO_REG in all files.
For lm78-compatible drivers, minimum speed is 2657 RPM when the
divisor is 2. Attempts to set lower than that now are set to 0.
Before was set to a random number.
Thanks Jeff Dairiki.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@330 7894878c-1315-0410-8ee3-d5d059ff63e0
Fan1 causes now alarm when rpm drops.
Fixed libsensors displaying incorrect temperature limits for rev 80.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@293 7894878c-1315-0410-8ee3-d5d059ff63e0
Code written by Ludovic Drolez (ldrolez@usa.net)
All voltages are now readable for the rev 00 but the read is blocked for 10
seconds because of the needed comparisons.
Currently voltages are readable in /proc only.
This functionality can be enabled at module-load with parameter readall:
insmod gl518 readall=1
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@289 7894878c-1315-0410-8ee3-d5d059ff63e0
* Better VDD internal computation, as described in the data sheet;
* Fixed the config file to reflect the above change;
* The library read the wrong file to get its gl518sm alarm data.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@150 7894878c-1315-0410-8ee3-d5d059ff63e0
* (module) VIN limits are now set to sane values (3V instead of 30V, which
caused nasty overflows)
* (module) VIN limits had min/max swapped in gl518_attach_adapter
* (lib) TEMP_HYST used the VID sysctl instead of the TEMP sysctl, leading
to bogus readings
* (sensors) print n/a for gl518 not available readings.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@145 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark D. Studebaker