* Force the Winbond into bank 0 before anything else is done
* Copied fan_div patch from lm78.c
* Copied IN_{FROM,TO}_REG patch from lm78.c
* Copied alarms computation bug fix from lm78.c
* Nicer way of managing banks: the bank number to access is now the high
byte of the (as u16 declared) register number. Only
w38781d_{read,write}_value needs now to be aware of banks. Also, the
w38781d_{read,write}_value functions now know that sensors 2 and temp, hyst
and over registers are word-sized.
* Introduced fan_div for FAN3 and 9-bit temperature readings.
* Made beep file work like the gl518sm one
* Corrected small VID problem (bit 4 was read from the wrong register)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@121 7894878c-1315-0410-8ee3-d5d059ff63e0
* fan_div should now be handled correctly (please, could anybody play with
this? My fan is on FAN3, the one whose fan_div can't be changed...)
* IN_{TO,FROM}_REG no longer needs the additional in parameter, since we
eliminated scaling in the module.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@114 7894878c-1315-0410-8ee3-d5d059ff63e0
* sensors.conf.eg now contains LM80 declarations
* i2c/i2c-core.c again displays which adapters and clients are found and
connected, but it does not track the calls to transfer functions in dmesg
* Slight alarms computation bug in lm78.c repaired
* First hacks at lm80.c; expect a fully working version later today
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@113 7894878c-1315-0410-8ee3-d5d059ff63e0
This file consists of two numbers: the first is either 0 (global sound
alarm disable) or 1 (enable), the second is in the same encoding as the
'alarm' file and determines for which alarms the speaker will sound.
The new file was added to the module, the library and the sensors application.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@112 7894878c-1315-0410-8ee3-d5d059ff63e0
Some basic support, in the form of sensors_get_all_features(), for chips that
are known to the library, but unknown to the application. prog/sensors has
a demo of how to use this, in function print_unknown_chip in chips.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@110 7894878c-1315-0410-8ee3-d5d059ff63e0
An expression can now refer to the value it has to compute (@), but also to
other values. This is now perfectly valid as an expression:
vid + in_min - in_max * 2 / @
Not that this is very sensible, but you get the idea. Please install the
new example config file, or replace all old 'val' occurences with '@'.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@107 7894878c-1315-0410-8ee3-d5d059ff63e0
* Added sensors_get_algorithm_name and sensors_get_adapter_name to the
library.
* First application of sensors_get_value is very encouraging; LM75 data is
now printed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@103 7894878c-1315-0410-8ee3-d5d059ff63e0
(print detected chips)
Yes! I am getting somewhere now. The sensors program does at last something
visible: it prints all detected chips. OK, cat /proc/sys/dev/sensors/chips
is faster. But it is a start...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@102 7894878c-1315-0410-8ee3-d5d059ff63e0
Most notably, config file line numbers are now stored, so we can now generate
better error messages.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@98 7894878c-1315-0410-8ee3-d5d059ff63e0
This brings the archive into synch with my harddisk...
Everything in the lib directory should compile without problems (yes, even
without warnings even if WARN=1). It is not well-tested, though, and there
are some minor functions which must still be added. It is now almost
usable.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@95 7894878c-1315-0410-8ee3-d5d059ff63e0
These are the relatively well-tested files. They allow you to parse a
configuration file, and to build an internal abstract syntax tree.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@91 7894878c-1315-0410-8ee3-d5d059ff63e0
* Added lib directory; the library will live here
* Added Makefile fragment in the lib dir
* Modified README.directories to include the new dir
* Added lib directory to the fragments the Makefile uses
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@90 7894878c-1315-0410-8ee3-d5d059ff63e0
Several, mostly internal, things changed. Most notably, the install
directories are extended (we'll need this to install the new library).
Also, explicit rules for creating .c and .o files are added.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@88 7894878c-1315-0410-8ee3-d5d059ff63e0
doesn't seem to have any sensors (I guess?), or the Windbond PDF is so
convoluted that I haven't understood it enough to get it working (another
good possibility). Oh, well. It builds and inserts, anyway.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@85 7894878c-1315-0410-8ee3-d5d059ff63e0
start for the LM80 driver. (Since 80-79=1, they must be very similar,
right? :') Oh, and I removed the ISA components from it since the LM80 is
an SMBus only chip, too.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@84 7894878c-1315-0410-8ee3-d5d059ff63e0
has no Winbond specific features implemented yet. Proper testing for
a Winbond also needs to be implemented. src/Module.mk and src/sensors.h
were modified slightly to support the new driver.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@83 7894878c-1315-0410-8ee3-d5d059ff63e0
* Turned the i2c noise level down, by setting the debug_level in algo-bit.c
and i2c-core.c to 0 instead of 1. This should stop it from polluting
the dmesg output, as it does at this moment.
* Renamed gl518-r?0-* entries to gl518sm-r?0-*
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@82 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fixed FORCE_PIIX4_ENABLE bus (misspelled function call)
* Added Kyösti's mail about the VIA chipset to the doc directory, as
temporary placeholder
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@78 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard