Added limit defaults for in7/in8 and added separate
782d/783s limit defaults for in5/in6.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@304 7894878c-1315-0410-8ee3-d5d059ff63e0
* No more redefined complaints of MODULE_* symbols for 2.0 kernels
This was introduced by the last archive of Simon
* Correct load order of adapters in detect script modprobe report
You can't assume things come out of a hash in the same order as you
put them in, of course :-(
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@303 7894878c-1315-0410-8ee3-d5d059ff63e0
detection bug
The lesson of today: the control variable in foreach loops is local to the
loop and regains his former value on exit of the loop. Oops.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@298 7894878c-1315-0410-8ee3-d5d059ff63e0
Recognize chips, adjust /proc entries.
Added registers for Vbat/V5sb for 782d.
Did quick test that 781d isn't broken.
782d/783s untested, I'll send mail to the guy that volunteered.
No PWM fan support yet.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@297 7894878c-1315-0410-8ee3-d5d059ff63e0
Fan1 causes now alarm when rpm drops.
Fixed libsensors displaying incorrect temperature limits for rev 80.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@293 7894878c-1315-0410-8ee3-d5d059ff63e0
Code written by Ludovic Drolez (ldrolez@usa.net)
All voltages are now readable for the rev 00 but the read is blocked for 10
seconds because of the needed comparisons.
Currently voltages are readable in /proc only.
This functionality can be enabled at module-load with parameter readall:
insmod gl518 readall=1
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@289 7894878c-1315-0410-8ee3-d5d059ff63e0
device drivers. Specifically, I added these lines:
(in includes list)
#include "i2c-isa.h"
(Near beginning of *-attach-adapter function)
/* Make sure we aren't probing the ISA bus!! */
if (i2c_is_isa_adapter(adapter)) return 0;
This may be redundant is a couple of the files, but it shouldn't hurt.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@283 7894878c-1315-0410-8ee3-d5d059ff63e0
* Redid the internal report structure
* Separated the report function from main
* Rewrote the structure insertion functions
All in all, the functions have become much more readable and maintainable.
The downside: there are almost certainly new bugs created.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@281 7894878c-1315-0410-8ee3-d5d059ff63e0
finds anything within 0x50-0x57, it will claim it is an EEPROM with a
confidence of '1' (the least confidence). Using the PC-100 SPD spec
I should be able to add better detection, at least for serial EEPROMs
on PC-100 SDRAM DIMMs.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@276 7894878c-1315-0410-8ee3-d5d059ff63e0
I forgot to set the I2C address correctly, so it was always comparing with
device 0x00 :-(
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@274 7894878c-1315-0410-8ee3-d5d059ff63e0
All main functionality is now available; please test and send the output
of the summary to me!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@268 7894878c-1315-0410-8ee3-d5d059ff63e0
A few ISA detections must still be added; also, I want to add the option not
to scan certain I2C addresses.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@266 7894878c-1315-0410-8ee3-d5d059ff63e0
No alias detection (ie. detection of chips connected to both ISA and I2C bus)
is done yet; but all hooks are in.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@265 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark D. Studebaker