Added limit defaults for in7/in8 and added separate
782d/783s limit defaults for in5/in6.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@304 7894878c-1315-0410-8ee3-d5d059ff63e0
* No more redefined complaints of MODULE_* symbols for 2.0 kernels
This was introduced by the last archive of Simon
* Correct load order of adapters in detect script modprobe report
You can't assume things come out of a hash in the same order as you
put them in, of course :-(
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@303 7894878c-1315-0410-8ee3-d5d059ff63e0
Recognize chips, adjust /proc entries.
Added registers for Vbat/V5sb for 782d.
Did quick test that 781d isn't broken.
782d/783s untested, I'll send mail to the guy that volunteered.
No PWM fan support yet.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@297 7894878c-1315-0410-8ee3-d5d059ff63e0
Fan1 causes now alarm when rpm drops.
Fixed libsensors displaying incorrect temperature limits for rev 80.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@293 7894878c-1315-0410-8ee3-d5d059ff63e0
Code written by Ludovic Drolez (ldrolez@usa.net)
All voltages are now readable for the rev 00 but the read is blocked for 10
seconds because of the needed comparisons.
Currently voltages are readable in /proc only.
This functionality can be enabled at module-load with parameter readall:
insmod gl518 readall=1
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@289 7894878c-1315-0410-8ee3-d5d059ff63e0
device drivers. Specifically, I added these lines:
(in includes list)
#include "i2c-isa.h"
(Near beginning of *-attach-adapter function)
/* Make sure we aren't probing the ISA bus!! */
if (i2c_is_isa_adapter(adapter)) return 0;
This may be redundant is a couple of the files, but it shouldn't hurt.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@283 7894878c-1315-0410-8ee3-d5d059ff63e0
It compiles now cleanly against kernel 2.0.36; I checked, double-checked and
cross-checked.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@247 7894878c-1315-0410-8ee3-d5d059ff63e0
All our own code (ie. anything not in the i2c directory) compiles now without
warnings, even with WARN=1 (which sets -Wall -Wstrict-prototypes -Wshadow
-Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wnested-externs
-Winline). There is one exception: the lex code (conf-lex.l) complains about
unused functions. That's flex' fault, not ours!
The i2c code still emits many warnings with the above flags; that's Simon's
problem.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@233 7894878c-1315-0410-8ee3-d5d059ff63e0
Renamed sensors entry from "SiS 5595 Sensor-*" to "sis5595-*"
Added this name in sensors.conf.eg to use lm78 names for inputs.
Small related document updates.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@199 7894878c-1315-0410-8ee3-d5d059ff63e0
integrated LM78, so the driver is only a customized copy of lm78.c
This southbridge can also do i2c, but this not enough documented in
the datasheet. So i2c is currently not supported.
Some cosmetic changes for VIA driver and documentation.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@196 7894878c-1315-0410-8ee3-d5d059ff63e0
It tries to delete bit-via.o, bit-mb.o, isa.o and piix4.o in the module
install directory.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@194 7894878c-1315-0410-8ee3-d5d059ff63e0
lm_sensors2 source tree. Improvements in VIA driver,
now checks revision code and refuses to load the
module if bit_test (in algo-bit) fails.
(Also fixes previous unsuccessfull CVS commit)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@187 7894878c-1315-0410-8ee3-d5d059ff63e0
I really hope I did not forget an add or remove. If strange things happen
when you compile, please let me know.
There may still be problems with the EXPORT_* stuff; it seems to work now
for kernel 2.0.36pre19, but it may give trouble for earlier kernels. We
need to check that.
Some i2c modules may be a bit verbose at this moment.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@184 7894878c-1315-0410-8ee3-d5d059ff63e0
Until now, all installed include files depended on a #defined variable
LM_SENSORS: if it was defined, other files were included as "somefile.h"
instead of <linux/somefile.h>. This was clearly dangerous, and is fixed
now, by automatically deleting the offending lines from the include file
when it is installed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@180 7894878c-1315-0410-8ee3-d5d059ff63e0
I added two new make file 'includes': busses/Module.mk and chips/Module.mk
Frodo- You may want to review the makefile structure to make sure that
the system works as you intended.
Note: The docs still need to be updated to reflect the new file arrangement,
but at least it builds!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@176 7894878c-1315-0410-8ee3-d5d059ff63e0
output to ADM9240. Status/alarms values need to be implemented instead
of a raw output, but I'll do that too.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@173 7894878c-1315-0410-8ee3-d5d059ff63e0
Everything is in, except the IOCTL hook (which will be pretty simple to add).
It compiles cleanly. It is not tested at all.
Also a very small fix for i2c-proc, and Makefile.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@158 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark D. Studebaker