integrated LM78, so the driver is only a customized copy of lm78.c
This southbridge can also do i2c, but this not enough documented in
the datasheet. So i2c is currently not supported.
Some cosmetic changes for VIA driver and documentation.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@196 7894878c-1315-0410-8ee3-d5d059ff63e0
Until now, all installed include files depended on a #defined variable
LM_SENSORS: if it was defined, other files were included as "somefile.h"
instead of <linux/somefile.h>. This was clearly dangerous, and is fixed
now, by automatically deleting the offending lines from the include file
when it is installed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@180 7894878c-1315-0410-8ee3-d5d059ff63e0
output to ADM9240. Status/alarms values need to be implemented instead
of a raw output, but I'll do that too.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@173 7894878c-1315-0410-8ee3-d5d059ff63e0
Everything is in, except the IOCTL hook (which will be pretty simple to add).
It compiles cleanly. It is not tested at all.
Also a very small fix for i2c-proc, and Makefile.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@158 7894878c-1315-0410-8ee3-d5d059ff63e0
switch. It can switch two devices which each consume 300mA at 5V (or less).
This is good for fans, lights, or into relays for heftier stuff.
Here's what the usage looks like:
[root@penn sensors]# ls ltc1710-i2c-1-58/*
ltc1710-i2c-1-58/switch1
ltc1710-i2c-1-58/switch2
[root@penn sensors]# cat ltc1710-i2c-1-58/*
0
0
[root@penn sensors]# echo "1" > ltc1710-i2c-1-58/switch2
(blue LED turned on)
[root@penn sensors]# cat ltc1710-i2c-1-58/*
0
1
One problem with the device: It doesn't support reads. It ignores any
read transactions, so even detection with a read won't work. This
also means that the status of the switches has to be remembered and
can't be polled.
As simple as this device is, it is one of the few which actually
allows the computer to send signals OUT into the world to
control something.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@155 7894878c-1315-0410-8ee3-d5d059ff63e0
basically an expanded LM75. It can have an external temp probe (in
addition to the internal one), customizable conversion rate (in # of times
per second, depending on power consumption requirements), and
actually has a device-id register for easier/more-certain detecting!
The only strange property is the low-limit. The low-limit doesn't act
as a Hystersis value like the LM75. I.e., if the temp falls below it,
it triggers an alarm instead of clearing it. Strange, ey? This makes
using the chip for a thermostat control (like for a fan) much harder.
But it *could* be used to turn on a heater to prevent your computer from
freezing. :')
Here's what my output looks like (without a remote sensor. temp's
are the same format as the LM75 [high-limit, low-limit, value]):
[root@penn adm1021-i2c-0-18]# ls -l
total 0
-r--r--r-- 1 root root 0 Jan 9 23:42 die_code
-rw-r--r-- 1 root root 0 Jan 9 23:42 remote_temp
-r--r--r-- 1 root root 0 Jan 9 23:42 status
-rw-r--r-- 1 root root 0 Jan 9 23:42 temp
[root@penn adm1021-i2c-0-18]# cat *
3
60 20 0
76
60 20 24
PS- all temp values in the ADM1021 (limits and readings) are signed
(2's comp) bytes. So, all readings go from -128 to 127 C (actually,
the docs say it can only reliable sense down to -65), and only
in whole degree increments.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@153 7894878c-1315-0410-8ee3-d5d059ff63e0
* Force the Winbond into bank 0 before anything else is done
* Copied fan_div patch from lm78.c
* Copied IN_{FROM,TO}_REG patch from lm78.c
* Copied alarms computation bug fix from lm78.c
* Nicer way of managing banks: the bank number to access is now the high
byte of the (as u16 declared) register number. Only
w38781d_{read,write}_value needs now to be aware of banks. Also, the
w38781d_{read,write}_value functions now know that sensors 2 and temp, hyst
and over registers are word-sized.
* Introduced fan_div for FAN3 and 9-bit temperature readings.
* Made beep file work like the gl518sm one
* Corrected small VID problem (bit 4 was read from the wrong register)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@121 7894878c-1315-0410-8ee3-d5d059ff63e0
This file consists of two numbers: the first is either 0 (global sound
alarm disable) or 1 (enable), the second is in the same encoding as the
'alarm' file and determines for which alarms the speaker will sound.
The new file was added to the module, the library and the sensors application.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@112 7894878c-1315-0410-8ee3-d5d059ff63e0
Several, mostly internal, things changed. Most notably, the install
directories are extended (we'll need this to install the new library).
Also, explicit rules for creating .c and .o files are added.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@88 7894878c-1315-0410-8ee3-d5d059ff63e0
doesn't seem to have any sensors (I guess?), or the Windbond PDF is so
convoluted that I haven't understood it enough to get it working (another
good possibility). Oh, well. It builds and inserts, anyway.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@85 7894878c-1315-0410-8ee3-d5d059ff63e0
has no Winbond specific features implemented yet. Proper testing for
a Winbond also needs to be implemented. src/Module.mk and src/sensors.h
were modified slightly to support the new driver.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@83 7894878c-1315-0410-8ee3-d5d059ff63e0
To be done: support for GL518SM revision 0x80 and GL520SM
Kyösti, if you have some time soon, could you please test it?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@56 7894878c-1315-0410-8ee3-d5d059ff63e0
See doc/sysctl for an explanation why it is needed.
Also fixed two very small cleanup bugs in lm75/lm78, which would probably be
impossible to trigger anyway, but still.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@51 7894878c-1315-0410-8ee3-d5d059ff63e0
* LM75 temperature limits initializations were switched
* LM78 VID readings were off by a factor 100
* New bit-mask constants in sensors.h for LM78 alarm field
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@49 7894878c-1315-0410-8ee3-d5d059ff63e0
* Header files isa.h, sensors.h and smbus.h will now be installed on a
'make install';
* #ifdef __KERNEL__ added to the above header files where appropriate;
* Correct files are included, both if __KERNEL__ is true and false.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@42 7894878c-1315-0410-8ee3-d5d059ff63e0
Well, it should work. But until we have implemented the remaining parts of
piix4.o, we won't be able to test it. Anybody?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@29 7894878c-1315-0410-8ee3-d5d059ff63e0
I moved a large part of the proc and sysctl call-back functions into
sensors.c. The result saved about 100 lines in lm78.c; it now uses only
2 pages according to lsmod, instead of 3! Also, other modules can use
the same functions, saving coding efforts and keeping them small.
I also fixed a fan_div display error.
Expect more code to be moved to sensors.c: I am writing lm75.c, and
most things which are in both modules (and so probably general purpose)
will be moved to sensors.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@28 7894878c-1315-0410-8ee3-d5d059ff63e0
* LM78, LM78-J and LM79 now all supported
* Chip type reflected in /proc/bus/i2c-?, /proc/.../sensors/* and
/proc/ioports.
* VID initialises IN0 and IN1, except if it is 3.50 V (then it falls back to
2.80 V)
* Slightly better ISA detection (but still not good enough)
* Temperature now in tenth of degrees, instead of whole degrees (for better
compatibility)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@27 7894878c-1315-0410-8ee3-d5d059ff63e0
* Some Makefile changes. doc/makefiles documents most of them.
* The lm78 module now compiles, but it will still crash.
* New module sensors, with general code usable by chip driver modules
* i2c-core: added function i2c_adapter_id(), which returns a (low)
unique i2c-bus ID.
* lm78.h stuff moved into lm78.c or sensors.h
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@19 7894878c-1315-0410-8ee3-d5d059ff63e0
When you insert i2c-proc.o, you will find some files in /proc/bus (which
is first created for 2.0 kernels). Currently, the following files are
implemented:
* /proc/bus/i2c
A list of i2c/smbus adapters. If DEBUG was true when you compiled this
module, you will also see the ISA pseudo-adapter (if isa.o is loaded).
* /proc/bus/i2c-?
For each adapter in /proc/bus/i2c, a list of registered clients.
If DEBUG was true when you compiled this module, you will also see
the i2c-proc pseudo client.
Of course, these entries are modified when adapters are added/removed.
Kernel 2.1.x users are encouraged to test this module, as /proc entries
are somewhat different beginning with kernel 2.1.29.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@18 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-bus is renamed to i2c-proc
* small patch in i2c-core.c (see correspondence with Simon Vogl)
* sensors.h contains i2c constants
* It seems lm78.[ch] was not yet committed?!?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@16 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard