compatibility with the old:
-The feature lists for the fscpos, fscscy and fscher have been extended to
include the new features exported by the fschmd driver
-Feature lists for the fschmd and fschrc have been added
-The print functions in "sensors" for the fscpos, fscscy and fscher have
been modified to detect on which driver they run, on the old driver
behaviour is unmodified, on the new driver the non sysfs-interface
compliant attributes are not used and the extra features exported by the
new driver are shown.
-print functions for the fschmd and fschrc have been added to "sensors"
-mapping from the non standard sysfs attr name fan#_ripple used by the old
fscpos, fscscy and fscher drivers to the standard fan#_div used by the
fschmd driver has been added to getsysname() using altsysname.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4939 7894878c-1315-0410-8ee3-d5d059ff63e0
as the BIOS is supposed to set them up properly. This information makes it
easier to find out which temperature channel corresponds to the CPU.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4456 7894878c-1315-0410-8ee3-d5d059ff63e0
memory as part of another structure. This rather large patch fixes that by
making the smaller piece an explicit member of the larger.
I brought this patch into sync with the latest SVN, and tested it by comparing
objects files from the tree pre- and post- patch.
The remaining 99% of the credit goes to Bob Schlärmann <bob2@dsv.nl> for
creating the original patch... thanks Bob!
* Bob Schlärmann <bob2@dsv.nl> [2006-12-24 18:29:39 +0100]:
> The following patch changes all of the lib/chips.c entries and any function
> that uses sensors_chip_feature. Most of the conversion was done through a
> perl script, so if you don't agree with the syntax it'll be easy to change.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4287 7894878c-1315-0410-8ee3-d5d059ff63e0
sensord: Add pc87247 support (fans only).
sensors: Add pc87247 support (fans only).
sensors-detect: Advertise the upcoming pc87427 driver.
Thanks to Amir Habibi at Candelis for setting up a test system.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4196 7894878c-1315-0410-8ee3-d5d059ff63e0
input order to match the Linux 2.6 driver.
libsensors: Change vt1211 temp3-7 magnitude from 1 to 3.
sensors.conf.eg: Adjust the vt1211 section to match the new driver
interface.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4168 7894878c-1315-0410-8ee3-d5d059ff63e0
libsensors. The Linux 2.6 adm1026 driver uses the standard numebring
(from 1 to 8). Map fan0 to fan8 to make things work while keeping
confusion to the minimum (hopefully.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4118 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0
Hans de Goede