abituguru seems to work well with the new dynamic chip support and generic
chip printroutines. note: the abituguru code should be completly removed in
the future.
-comment k8temp entry in lib/chips.c and prog/sensors/main.c, as the
k8temp seems to work well with the new dynamic chip support and generic
chip printroutines. note: the k8temp code should be completly removed in
the future.
-make the match for the subtype exact instead of a strncmp, otherwise
an alarm_enable flag gets classified as an alarm, leading to all sensors who
have their alarm enabled getting an alarm reported, as the alarm_enabled gets
read as alarm.
-and do the same for the _input match to check if this is a main or subfeature
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4367 7894878c-1315-0410-8ee3-d5d059ff63e0
memory as part of another structure. This rather large patch fixes that by
making the smaller piece an explicit member of the larger.
I brought this patch into sync with the latest SVN, and tested it by comparing
objects files from the tree pre- and post- patch.
The remaining 99% of the credit goes to Bob Schlärmann <bob2@dsv.nl> for
creating the original patch... thanks Bob!
* Bob Schlärmann <bob2@dsv.nl> [2006-12-24 18:29:39 +0100]:
> The following patch changes all of the lib/chips.c entries and any function
> that uses sensors_chip_feature. Most of the conversion was done through a
> perl script, so if you don't agree with the syntax it'll be easy to change.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4287 7894878c-1315-0410-8ee3-d5d059ff63e0
sensord: Add pc87247 support (fans only).
sensors: Add pc87247 support (fans only).
sensors-detect: Advertise the upcoming pc87427 driver.
Thanks to Amir Habibi at Candelis for setting up a test system.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4196 7894878c-1315-0410-8ee3-d5d059ff63e0
input order to match the Linux 2.6 driver.
libsensors: Change vt1211 temp3-7 magnitude from 1 to 3.
sensors.conf.eg: Adjust the vt1211 section to match the new driver
interface.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4168 7894878c-1315-0410-8ee3-d5d059ff63e0
libsensors. The Linux 2.6 adm1026 driver uses the standard numebring
(from 1 to 8). Map fan0 to fan8 to make things work while keeping
confusion to the minimum (hopefully.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4118 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch enables the reading of temp1 (Reading3) from the VT1211.
Reading3 returns the V1211's internal temperature.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3246 7894878c-1315-0410-8ee3-d5d059ff63e0
in line with the new 2.6 driver. The most important changes are temp
inputs renumbering, and conversion formulas changes, because part of the
conversions are now done by the driver as required by the interface
standard.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3194 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare