* Made i2c-voodoo3.c compile with 2.0 kernels
It should also run without problem, but obviously I could not test it
Changes are in the memory mapping of PCI address space
* Removed several warning from i2c-voodoo3.c
It compiles now without any warnings, even with WARN=1
* Removed several warnings from matorb.c
It compiles now without any warnings, even with WARN=1
In the proces, I fixed one serious bug (assignment instead of comparison)
* Removed a warning from w83781d.c
It compiles now without any warnings, even with WARN=1
Hint: Once in a while, try to compile with WARN=1 and remove warnings. It
helps to find serious, hidden problems. Really!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@472 7894878c-1315-0410-8ee3-d5d059ff63e0
is right now, it should clear the LCD screen. But, I discovered that
the display simply can't cope with I2C read commands - it completely
locks up *both* the data and the *clock* lines! (That's new.) So,
it kills the bus when probes or other reads are done to the device.
Matrix-Orbital has to fix this before we can get anything
usable working. :'(
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@464 7894878c-1315-0410-8ee3-d5d059ff63e0
need these 'special' modelines for XF86Config:
ModeLine "640x480NTSC" 28.195793 640 656 658 784 480 520 525 600
ModeLine "800x600NTSC" 38.769241 800 812 814 880 600 646 649 735
My monitor really doesn't like these modes, but they seem to work well
for TV output. Oh, and this is only for a screen depth of 16bits
right now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@459 7894878c-1315-0410-8ee3-d5d059ff63e0
bad like 'oops' when there is more than one voodoo3 in the system or when
there is none.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@456 7894878c-1315-0410-8ee3-d5d059ff63e0
during a transaction. It also can detect a 'hung' bus prior to starting
a transaction. It seems to properly read and write to the BT869.
Todo: support for multiple voodoo3 cards. Support for other transaction
types (fairly simple). Use code as a start for a better algo-bit
adapter template? Complete the bt869 driver.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@452 7894878c-1315-0410-8ee3-d5d059ff63e0
Voodoo3 I2C notes (or short commings):
* only one type of read supported: type 'byte' (no 'command')
* only one type of write supported: type 'byte_data'
(The two above are more the limitation of the BT869 rather than
the I2C bus.)
* I used the SMBus 'model' rather than the 'bit' model because
I thought it was easier this way.
* failed bus transactions yeild 0xFF, not an error! So, this means
that many drivers instantly latch onto this adapter because all
reads and writes succeed without error. Without the datasheet for
the chip, I can't do much to fix this. (Amazing I got this far!)
BT869/868 notes:
* the BT869 has lots and lots of registers (~50), but can
only read 3 (fairly uninteresting) status registers(!). Right
now all three status registers are read through the 'status' file,
but I haven't decided on the best method for writing to the rest
of the registers.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@448 7894878c-1315-0410-8ee3-d5d059ff63e0
Originally:
[...]
if (is_isa) {
data = (struct w83781d_data *) (((struct isa_client *) new_client)+1);
new_client->addr = 0;
((struct isa_client *) new_client)->isa_addr = address;
data->lock = MUTEX;
} else {
data = (struct w83781d_data *) (((struct i2c_client *) new_client)+1);
new_client->addr = address;
}
[...]
changed to this:
[...]
if (is_isa) {
data = (struct w83781d_data *) (((struct isa_client *) new_client)+1);
new_client->addr = 0;
((struct isa_client *) new_client)->isa_addr = address;
} else {
data = (struct w83781d_data *) (((struct i2c_client *) new_client)+1);
new_client->addr = address;
}
data->lock = MUTEX;
[...]
So, now the MUTEX is properly initialized for I2C chips, too. If the
mutex was knowly ignored for I2C devices (because the piix4 locks its
self), then the mutex should be ignored everywhere else in the code, but
it is not.
This seems to have solved my reproducable 'hanging' problem. But, other
drivers should be checked, too, just in case.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@433 7894878c-1315-0410-8ee3-d5d059ff63e0
This one was not nice at all. When /proc/bus/i2c-* is read, information is
put into a kernel buffer, which was declared to be the same size as the
final user-space buffer into which it should be copied. Information was
copied into the kernel buffer line by line (using sprintf). If the
buffer is smaller than the whole /proc/bus/i2c-*, only part of the file
was copied. But if the buffer did not break on a line-break, the sprintf
wrote beyond the kernel buffer. With devastating results. Solution: make
the kernel buffer a little longer, so that a single additional line would
fit into it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@431 7894878c-1315-0410-8ee3-d5d059ff63e0
aweful happens to me (I get hit by a bus, lose my mind, get hired
by Microsoft, etc.), then somebody else can easily take over.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@428 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard