Several, mostly internal, things changed. Most notably, the install
directories are extended (we'll need this to install the new library).
Also, explicit rules for creating .c and .o files are added.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@88 7894878c-1315-0410-8ee3-d5d059ff63e0
doesn't seem to have any sensors (I guess?), or the Windbond PDF is so
convoluted that I haven't understood it enough to get it working (another
good possibility). Oh, well. It builds and inserts, anyway.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@85 7894878c-1315-0410-8ee3-d5d059ff63e0
has no Winbond specific features implemented yet. Proper testing for
a Winbond also needs to be implemented. src/Module.mk and src/sensors.h
were modified slightly to support the new driver.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@83 7894878c-1315-0410-8ee3-d5d059ff63e0
To be done: support for GL518SM revision 0x80 and GL520SM
Kyösti, if you have some time soon, could you please test it?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@56 7894878c-1315-0410-8ee3-d5d059ff63e0
See doc/sysctl for an explanation why it is needed.
Also fixed two very small cleanup bugs in lm75/lm78, which would probably be
impossible to trigger anyway, but still.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@51 7894878c-1315-0410-8ee3-d5d059ff63e0
* LM75 temperature limits initializations were switched
* LM78 VID readings were off by a factor 100
* New bit-mask constants in sensors.h for LM78 alarm field
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@49 7894878c-1315-0410-8ee3-d5d059ff63e0
* Header files isa.h, sensors.h and smbus.h will now be installed on a
'make install';
* #ifdef __KERNEL__ added to the above header files where appropriate;
* Correct files are included, both if __KERNEL__ is true and false.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@42 7894878c-1315-0410-8ee3-d5d059ff63e0
Well, it should work. But until we have implemented the remaining parts of
piix4.o, we won't be able to test it. Anybody?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@29 7894878c-1315-0410-8ee3-d5d059ff63e0
I moved a large part of the proc and sysctl call-back functions into
sensors.c. The result saved about 100 lines in lm78.c; it now uses only
2 pages according to lsmod, instead of 3! Also, other modules can use
the same functions, saving coding efforts and keeping them small.
I also fixed a fan_div display error.
Expect more code to be moved to sensors.c: I am writing lm75.c, and
most things which are in both modules (and so probably general purpose)
will be moved to sensors.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@28 7894878c-1315-0410-8ee3-d5d059ff63e0
* LM78, LM78-J and LM79 now all supported
* Chip type reflected in /proc/bus/i2c-?, /proc/.../sensors/* and
/proc/ioports.
* VID initialises IN0 and IN1, except if it is 3.50 V (then it falls back to
2.80 V)
* Slightly better ISA detection (but still not good enough)
* Temperature now in tenth of degrees, instead of whole degrees (for better
compatibility)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@27 7894878c-1315-0410-8ee3-d5d059ff63e0
* Some Makefile changes. doc/makefiles documents most of them.
* The lm78 module now compiles, but it will still crash.
* New module sensors, with general code usable by chip driver modules
* i2c-core: added function i2c_adapter_id(), which returns a (low)
unique i2c-bus ID.
* lm78.h stuff moved into lm78.c or sensors.h
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@19 7894878c-1315-0410-8ee3-d5d059ff63e0
When you insert i2c-proc.o, you will find some files in /proc/bus (which
is first created for 2.0 kernels). Currently, the following files are
implemented:
* /proc/bus/i2c
A list of i2c/smbus adapters. If DEBUG was true when you compiled this
module, you will also see the ISA pseudo-adapter (if isa.o is loaded).
* /proc/bus/i2c-?
For each adapter in /proc/bus/i2c, a list of registered clients.
If DEBUG was true when you compiled this module, you will also see
the i2c-proc pseudo client.
Of course, these entries are modified when adapters are added/removed.
Kernel 2.1.x users are encouraged to test this module, as /proc entries
are somewhat different beginning with kernel 2.1.29.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@18 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-bus is renamed to i2c-proc
* small patch in i2c-core.c (see correspondence with Simon Vogl)
* sensors.h contains i2c constants
* It seems lm78.[ch] was not yet committed?!?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@16 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard